Purchase Specifications for a Self-Contained Solar LED ...



Purchase Specifications for a Solar Portable Airfield Lighting SystemOverviewThis specification is for a self-contained, solar-powered, portable airfield lighting system.The system will be suitable for a 5000ft/1500m portable systems and shall include:20 x solar aviation lights with RF operational control for taxiway, helipad and obstruction lighting48 x solar aviation runway lights with RF operational control16 x solar aviation threshold lights with RF operational controlOption for approach lights1 x wireless RF radio controller to suit RF-controlled runway lights1 x wireless RF radio controller to suit RF-controlled taxiway lightsCustom-built trailerOptional charging system. The trailer will have the option of being fitted with low voltage charging portsThe system shall be delivered ready to install. The only assembly required will be activation of each individual light and optional mounting accessories.Purchase Specifications for Individual System Components:2.1 Purchase Specifications for a Self-Contained Solar LED Aviation Light with RF Operational Control (taxiway, helipad & obstruction lights)OverviewThis specification is for a self-contained solar-powered LED aviation light.Each light shall be entirely self-contained with 2 x custom solar panels, 3.6V 16Ah NiMH battery, microprocessor-controlled electronics, ultra-high intensity LEDs and RF interface.The lights shall be delivered ready to install. The only assembly required will be activation of each individual light and optional mounting accessories.2.1.1 Light CharacteristicsThe light shall use 12 visible ultra-high intensity LEDs and 6 infrared LEDs.The light output shall be available in red, green, white, yellow, blue and sectored combinations.The light shall have a peak intensity of 9.0cd steady-on (green light output).The light shall have a horizontal output of 360°.The light shall have a vertical divergence of 0 - +7°.The light shall have an omnidirectional 360° LED reflector.The light shall have a minimum of 250 flash characteristics available. The flash characteristics shall be user adjustable without the need for infrared controllers.The light shall have three (3) intensity adjustments being Low, Medium and High.The light shall have Radio Frequency control.When operating by radio control, the light shall establish a peer to peer mesh network to provide extended control range beyond 5 miles.2.1.2 Electrical CharacteristicsThe light shall have an operating voltage of 3.6v.The light shall have an operating temperature range between -40 to 80°C.2.1.3 Solar CharacteristicsThe light shall use two multi-crystalline solar modules, angled at 60 degrees.The output of the solar module shall be 2.5watts.The solar module efficiency shall be 14%.Charging regulation shall be microprocessor controlled.2.1.4 Power SupplyThe light shall use a high grade NiMH battery.The battery capacity shall be 16Ah.The nominal voltage shall be 3.6v.The light shall have an autonomy of at least 20 nights steady-on when in low intensity mode.2.1.5 Physical CharacteristicsThe light shall be manufactured from UV-stabilised LEXAN? polycarbonate (lens and body).The light shall have a lens diameter of 140mm (5? inches).The light shall have a lens design using external optics with interior flute design.The light lens shall be pitched to accompany 2 internal solar modules, angled at 60 degrees.The light shall have a mounting pattern using 6 x 17mm holes on 200mm PCD.The light shall have a height of 240mm (9? inches).The light shall have a width of 231mm (9? inches).The light shall have a mass of 1.7kg (3?lbs).The light base shall be coloured to indicate the LED output colour during daylight.2.1.6 Handheld Remote ControlThe light will be activated via a Hand Held Remote Controller. The Handheld Remote Controller will operate at a frequency of 2.4GHz.The Handheld Remote Controller will be FCC / CE CompliantThe Handheld Remote Controller will have 128bit security encryption.The Hand Held Remote Controller will allow the following operations to be activated:LED Intensity. Factory set to 3 x different intensities. But can be set with up to 8 x intensity levels.LED Grouping, e.g. Visible or IRLight Grouping, each light can be programmed to work in up to 15 x separate groups within a single airfield.Lighting Characteristics – each light can be set to work as either Steady On or with up to 255 x Flash CodesBattery Diagnostic Function – using the Hand Held Remote each light can display if the internal battery is above or below a factory set voltage Flare Path – each light can be set to flash in sequence2.1.7 OptionsThe light shall be offered with the following options available from the manufacturer:RF Flash SynchronisationExternal ON/OFF Switch External Battery Charging Port Manual Operation2.1.8 Environmental FactorsThe light shall meet the following environmental factors:Humidity: 0 to 100%, MIL-STD-810FIcing: 22kg per square inchWind Speed: up to 160kphShock: MIL-STD-202G, Test Condition G, Method 213BVibration: MIL-STD202G, Test Condition B, Method 2042.1.9 CertificationsThe light shall be IP68 waterproof.The light shall meet CE EN61000-6-3:1997. EN61000-6-1:1997The manufacturer shall be ISO9001:2008 certified.2.1.10 ComplianceThe light shall comply with:ICAO Annex 14 Volume 1, ‘Aerodrome Design and Operations’, Forth edition July 2004, paragraph 5.3.17.7FAA AC5345-46D L861T when the light is operated in High Intensity ModeFAA AC5345-50B L863 when the light is operated in High Intensity ModeCASA Manual of Standards Part 139 paragraph 9.13.15.1 and 9.13.15.3 Section 9.2.2.1 when the light is operated in High Intensity Mode2.1.11 WarrantyThe light shall have a three (3) year warranty full product warranty, excluding battery which will have a warranty of one (1) year.2.2 Purchase Specifications for a Self-Contained Solar LED Aviation Light with RF Operational Control (runway & threshold lights)OverviewThis specification is for a self-contained solar-powered LED aviation light. The light will comply with FAA AC/150-5345-46D L861E photometrics.Each light shall be entirely self-contained with 4 x custom solar panels, 12V 24Ah SLA (Sealed Lead Acid) battery, microprocessor-controlled electronics, ultra-high intensity LEDs and RF interface.The lights shall be delivered ready to install. The only assembly required will be activation of each individual light and optional mounting accessories.2.2.1 Light CharacteristicsThe light shall use 16 visible ultra-high intensity LEDs.The light output shall be available in red, green, white, yellow, blue and sectored combinations.The light shall have a peak intensity (steady-on) of - Red light output 25.0cd- Green light output 370.0cd- White light output 275.0cd- Yellow light output 92.5cdThe light shall have a horizontal output as per L861 and L861E.The light shall have a vertical divergence as per L861 and L861E.The light will comply with FAA AC/150-5345-46D L861E photometrics.The light shall have flash characteristics available including steady-on, Morse Code and RF sequenced & synchronised flashing. The light shall have three (3) intensity adjustments being Low, Medium and HighThe light shall have Radio Frequency control.When operating by radio control, the light shall establish a peer to peer mesh network to provide extended control range beyond 5 miles.2.2.2 Electrical CharacteristicsThe light shall have integrated circuit protection.The light shall have an operating voltage of 12v.The light shall have an operating temperature range between -40 to 80°C.2.2.3 Solar CharacteristicsThe light shall use four (4) multi-crystalline solar modules.The total output of the solar module shall be 18watts.The solar module efficiency shall be 14%.Charging regulation shall be microprocessor controlled.2.2.4 Power SupplyThe light shall use a SLA (Sealed Lead Acid) battery.The battery capacity shall be 24Ah.The nominal voltage shall be 12v.The light shall have an autonomy of at least 120 hours steady-on when in low intensity mode.2.2.5 Physical CharacteristicsThe body of the light shall be manufactured from 7-stage powder-coated aluminium.The light lens shall be manufactured from UV-stabilised LEXAN? polycarbonate.The light shall have a lens diameter of 155mm (6? inches).The light shall have a sixteen (16) segment, multi-focus lens.The light shall have a mounting pattern using 4 holes on 200mm OD base.The light shall have a height of 495mm (19? inches).The light shall have a width of 233mm (9? inches).The light shall have a mass of 14kg (30?lbs).2.2.6 Handheld Remote ControlThe light will be activated via a Hand Held Remote Controller. The Handheld Remote Controller will operate at a frequency of 2.4GHz.The Handheld Remote Controller will be FCC / CE CompliantThe Handheld Remote Controller will have 128bit security encryption.The Hand Held Remote Controller will allow the following operations to be activated:LED Intensity. Factory set to 3 x different intensities. But can be set with up to 8 x intensity levels.LED Grouping, e.g. Visible or IRLight Grouping, each light can be programmed to work in up to 15 x separate groups within a single airfield.Lighting Characteristics – each light can be set to work as either Steady On or with up to 255 x Flash CodesBattery Diagnostic Function – using the Hand Held Remote each light can display if the internal battery is above or below a factory set voltage Flare Path – each light can be set to flash in sequence2.2.7 OptionsThe light shall be offered with the following options available from the manufacturer:RF Flash SynchronisationIR 2.2.8 Environmental FactorsThe light shall meet the following environmental factors:Humidity: 0 to 100%, MIL-STD-810FIcing: 22kg per square inchWind Speed: up to 160kphShock: MIL-STD-202G, Test Condition G, Method 213BVibration: MIL-STD202G, Test Condition B, Method 2042.2.9 CertificationsThe light shall be IP68 waterproof.The light shall meet CE EN61000-6-3:1997. EN61000-6-1:1997The manufacturer shall be ISO9001:2008 certified.2.2.10 ComplianceThe light shall be supplied with an optic to meet either:Photometrics for ICAO Annex 14 Volume 1, ‘Aerodrome Design and Operations’, Forth edition July 2004. Runway Edge - paragraph 5.3.9. Appropriate for use as threshold - paragraph 5.3.10, 5.3.11 threshold light or end light Approach - paragraph 5.3.4.1A & B, 5.3.4.8 simple approach lighting systemORPhotometrics for FAA AC/150-5345-46D L861 (High Intensity Mode)2.2.11 WarrantyThe light shall have a three (3) year warranty full product warranty, excluding battery which will have a warranty of one (1) year.2.3 Purchase Specifications for a Wireless Handheld Controller OverviewThis specification is for a wireless handheld controller.The wireless handheld controller shall enable the remote activation and setting of characteristics of lights within an airfield.The wireless handheld controller shall come supplied complete with charger in a protective case.2.3.1 Operational CharacteristicsThe wireless handheld controller will have 128bit security encryption.The wireless handheld controller shall have user adjustable encryption key.The wireless handheld controller shall have user adjustable frequency selection.The wireless handheld controller will allow the following operations to be activated:LED Intensity. Factory set to 3 x different intensities. But can be set with up to 8 x intensity levels.LED Grouping, e.g. Visible or IRLight Grouping, each light can be programmed to work in up to 15 x separate groups within a single airfield.Lighting Characteristics – each light can be set to work as either Steady On or with up to 255 x Flash CodesBattery Diagnostic Function – using the Hand Held Remote each light can display if the internal battery is above or below a factory set voltage Flare Path – each light can be set to flash in sequence2.3.2 Electrical CharacteristicsThe wireless handheld controller shall have a range of 1.5km, peer-to-peer networking.The wireless handheld controller will operate at a frequency of 2.4GHz.The wireless handheld controller shall have an operating temperature range between -40 to 80°C.2.3.3 Power SupplyThe wireless handheld controller light shall use a high grade NiMh battery.The battery capacity shall be 16Ah.The nominal voltage shall be 7.2 V dc.2.3.4 Physical CharacteristicsThe case material of the wireless handheld controller shall be anodised aluminiumThe screen shall be backlit.2.3.5 CertificationsThe light shall meet CE EN61000-6-3:1997. EN61000-6-1:1997The manufacturer shall be ISO9001:2008 certified.2.3.6 ComplianceThe wireless handheld controller will be FCC / CE Compliant2.3.7 WarrantyThe wireless handheld controller shall have a one (1) year product warranty.2.4 Purchase Specifications for Custom-built Trailer OverviewThis specification is for a custom-built trailer.The trailer will be used to transport, charge and store the lights of the Solar Portable Airfield Lighting System when not fielded.The trailer will be fitted with fixtures to hold the lights securely in place to protect them during transport.The trailer will have the option of being fitted with low voltage charging ports to keep the lights fully charged whilst in storage. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download