A1.1.5.ELISA



Activity 1.1.5 ELISAIntroductionGiven Sue’s diagnosis, all of the patients from the past two days need to be called back in for immediate testing. School officials are concerned about a possible outbreak of bacterial meningitis on campus. In order to diagnose bacterial meningitis, it is necessary to obtain a sample of cerebral spinal fluid using a spinal tap. Since this procedure is extremely invasive and painful, only those patients doctors feel are at greatest risk for the disease will be tested. Use the spinal fluid samples to identify those who are infected with meningitis and to trace how this disease may have spread amongst the students on campus. Devise a plan to halt the spread of the disease before it is too late!In Human Body Systems, you investigated the workings of the immune system and learned how antibodies, specific proteins produced in response to invading antigens, circulate to keep us healthy. Antibodies seek out and attach themselves to invaders, flagging them for destruction by the immune system. These antigens are molecules foreign to the body and can include bacteria, viruses and fungi. Since antibodies are extremely specific to the antigens they attack, these proteins can be used in the laboratory to help identify disease agents. One test, the Enzyme-Linked Immunosorbant Assay (ELISA), combines targeted tagging with antibodies and an enzyme reaction that produces a visible color change to test for the presence of disease antigens or antibodies produced in response to that antigen. The ELISA assay can even detect disease agents in body fluids before the body has a chance to mount an immune response and produce antibodies. An ELISA can provide qualitative results, indicating whether a patient is positive or negative for the presence of the antigen or antibody, or an ELISA can provide quantitative results, determining how much of the detected substance is present. In this lab, you will use ELISA to test simulated cerebral spinal fluid (CSF) samples taken from patients at Sue’s school for the presence of bacterial meningitis. This rapid test can be completed in less than one hour and can detect antigens of the Neisseria meningitidis bacteria. Your job is to determine which college students are infected with this deadly bacterium and to propose a strategy for halting further spread. For those who are infected, use quantitative data to propose a chain of infection. Use data from the ELISA test and from the patient histories to trace how this disease may have spread from person to person. Equipment Computer with Internet accessLaboratory journalActivity 1.1.5 Student Resource SheetBio-Rad ELISA Immuno Explorer? KitSimulated primary and secondary antibodySimulated antigen (prepared at various concentrations)12-well microplate stripsMicrocentrifuge tubesWash bufferMicropipettor and disposable tipsPlastic transfer pipetsPaper towelsMarkerSafety gogglesModeling supplies (Optional)ProcedurePart I: Principles of the ELISA TestUse the Internet to review the relationship between antigens and antibodies.In your laboratory journal, write a paragraph that explains how antibodies work to keep us well. Underline each of the following terms in your paragraph: AntigenAntibodyImmune systemB lymphocytesNote that scientists can use antibodies in the lab to help detect disease antigens. To learn more about the ELISA test, log on to the Bio-Rad Interactive ELISA Immuno Explorer site at Choose Antigen Detection ELISA from the main screen. Use the blinking arrow on the left-hand side of the screen to navigate through the animation. Pay attention to the way in which antibodies are used to identify an antigen of interest.Use what you have learned in the animation to draw a labeled and colored sequential diagram or to construct a small interactive model that shows how the ELISA test can be used to identify patients who are infected with bacterial meningitis. Draw your diagram or sketch your model in your laboratory journal. Your drawing or model should include the following labeled components:AntigenPrimary antibodySecondary antibodyEnzymeSubstrateNeisseria meningitidis bacteriaShare your drawings or model with the class. Answer Conclusion questions 1-2. Part II: Serial DilutionsScientists and doctors want to know who is infected with a specific disease, but they may also want to know quantitative data about the strength of infection. By diluting samples to be tested, scientists can determine just how much of the disease antigen is present. Obtain a Student Resource Sheet from your teacher.Read the information presented about Serial Dilutions.Use information from the Resource Sheet to complete practice problems A-C found at the bottom of the Resource Sheet. Compare your answers with a partner. Correct any mistakes.Answer Conclusion question 3. Part III: Running an ELISAUse the ELISA test to determine which patients test positive for the presence of the disease antigen and to determine the relative concentration of the bacteria in the fluid of those who are affected. Early findings assure adequate treatment to those who are affected and provide information necessary to prevent the disease from spreading all over the college. In this lab activity, you will be testing the simulated CSF of two of the patients presented in Activity 1.1.2 and Activity 1.1.3. These samples have randomly been assigned by your teacher. Put on your safety goggles.Locate two 12-well strips at your lab station. Place one strip off to the side. You will use one strip to prepare your concentration standards and one strip to complete your ELISA test. Use a marker to label the outside wall of each well on one 12-well strip with the numbers 1-12. This strip will serve as your concentration standards.Use a micropipettor to add to 50?l of Phosphate Buffered Saline (PBS) from the tube labeled PBS to the wells labeled #2-#12.Add 100?l from the tube labeled 1,000 ng/ml antigen (AG) to the well labeled #1.To prepare the various concentration standards, complete the serial dilutions as described below. Pipet 50?l out of well #1 and add it to well #2. Pipet up and down gently three times to mix the sample in well #2.Using the same pipet tip, transfer 50?l from well #2 to well #3 and mix the sample in well #3Continue this process with each of the remaining wells. Stop when you reach well #11. Remove 50?l of fluid from well #11 and discard this fluid into a waste container. Do not add additional liquid to well #12. Draw a diagram of the 12-well plate in your laboratory journal.Under the diagram, calculate the dilution in each well. Think about what you have added to each well and about the practice serial dilution questions you completed in Part II.Note that the concentration of antigen in well #1 is 1000 ng/ml. Calculate the concentration of antigen in wells 2-12. Show your work in your laboratory journal. Write the concentration of each well under the appropriate well on your drawing. You will need this diagram for reference in the lab. Carefully place the standard strip off to one side.Obtain the second 12-well strip. This strip will function as your test strip. Label the first three wells with a “+” for the positive controls, the next three wells with a “-“ for the negative controls, the next three wells with the name of the first patient you will be testing, and the last three wells with the name of the second patient you will be testing. Record the names of the patients you will be testing in your laboratory journal. Use a fresh pipet tip to transfer 50?l of the positive control into the three wells labeled “+.”Use a fresh pipet tip to transfer 50?l of the negative control into the three wells labeled “-.” Use a fresh pipet tip to transfer 50?l of the simulated serum from your 1st patient into the three wells labeled with the patient name.Use a fresh pipet tip to transfer 50?l of the simulated serum from your 2nd patient into the three wells labeled with the patient name. Wait five minutes to allow the proteins in the samples to bind to the plastic wells. Remember, if the bacterial antigen is present in the samples, it will now be bound to the walls of the strip. When the five minutes is up, process both the standards strip and your test strip as described in the following steps. Wash the unbound sample out of the wells by tipping the microplate strip upside down onto a stack of paper towels. Allow the fluid to drain out and gently tap the strip a few times to remove any excess drops. Make sure to avoid splashing sample back into the wells. Keep the two strips separate. Discard the top layer of paper towels. Use a transfer pipet filled with wash buffer to each fill each well of both strips. Be careful not to spill over into the neighboring wells or let the pipet tip touch the side of the wells. The same transfer pipet can be used for all washing steps. Tip the microplate strips upside down on the paper towels and allow the wash buffer to drain out onto the paper. Tap each strip a few times to remove all of the liquid. Discard the top layer of paper towels. Repeat steps 35-37 to complete a second wash.Use a fresh pipet to transfer 50?l of primary antibody into all 12 wells of each microplate strip.Wait five minutes for the primary antibody to bind. Wash the unbound primary antibody out of the wells by repeating the wash steps in 35-37 two times. Use a fresh pipet tip to transfer 50?l of secondary antibody into all 12 wells of each microplate strip.Wait five minutes for the secondary antibody to bind.Wash the unbound secondary antibody out of the wells by repeating the wash steps in 35-37 three times. Use a fresh pipet tip to transfer 50?l of the enzyme substrate into all 12 wells of each microplate strip.Wait five minutes.Observe your results and record your findings in your lab journal. Note: Do not wait more than ten minutes to observe your results or the results may be invalid.Determine which patients test positive for the presence of the antigen.Using your concentration standards, approximate the level of infection for any patient that tests positive. Refer to your laboratory journal for the concentration values in each well of the standard strip. Share your findings with other lab groups.Record results for all nine patients who are being tested in the laboratory.For those patients who tested positive, use the concentration data as well as the patient history information presented in Activity 1.1.2 and Activity 1.1.3 to deduce a possible path of infection. Lower levels of disease antigen may signal a newer infection. Refer back to the connections chart or web you started in Activity 1.1.2. In your laboratory journal, explain who you believe was the first person infected and describe how the infection might have spread from this person to the rest of those with the disease. Provide evidence for your theory. Share your theory with the class. View the animation on bacterial meningitis from available at . In your laboratory journal, describe how patients are physically affected by bacterial meningitis and explain why this is such a serious infection. Explain how the name of the disease relates to the anatomy of the brain. Research appropriate treatment for bacterial meningitis and describe a comprehensive plan to treat those affected as well as prevent the spread of the disease on campus. Describe your plan in your laboratory journal. Share your ideas with the class and come to class consensus on how to respond to the outbreak. Answer the remaining Conclusion questions.ConclusionExplain why antibodies allow scientists to target and identify specific disease agents. Why is the secondary antibody used in an ELISA test conjugated with an enzyme? What happens when this enzyme meets up with its substrate?Disease samples from two patients were collected and subjected to serial dilutions before running an ELISA. What does it mean if the disease can be detected in samples from one person only at a dilution of 1/5 but the disease can be detected in the other patient at a dilution of 1/5 and 1/100?Describe a situation that illustrates why it is a good idea to complete the ELISA assay in triplicate. Why do you think college students living in dorms are often populations who see meningitis outbreaks? How did ELISA data allow you to track the path of infection at the college?Discuss the limitations of using antigen concentration to deduce the path of infection. Be sure to refer to the workings of the human immune system. The ELISA test can also be used to detect antibodies that are produced in response to a specific antigen. Using information about how you completed this ELISA experiment, outline a procedure for testing for antibodies in the blood. Explain why in sudden outbreaks, it may be better to test for disease antigens rather than for antibodies. Home pregnancy tests utilize ELISA technology. When a woman is pregnant, her body produces a hormone called human chorionic gonadotropin (hCG). Explain how antibodies can be used to detect this hormone and are linked to a color change a woman may see on a positive test. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download