Surge protection of power supply SPD type 2 for AC power ...

Datasheet

Surge protection of power supply

SPD type 2 for AC power supplies / EnerPro

image similar

PEN

Three pole SPD type 2 (class II) without N for three pase IT systems.

Technical Data

IEC category Nominal voltage AC Max. continuous operating voltage AC (50/60 Hz) Protection level at 5 kA Protection level at In (8/20 ?s) Response time Nominal discharge current (8/20 ?s) Max. impulse discharge current (8/20 ?s) Max. allowed fuse or back-up fuse Operating temperature range Max. conductor cross section Recommended conductor cross section Max. connection torque for terminals Enclosure material / colour Degree of protection (IEC EN 60529) Mounting on Switching capacity FM FM contact / contact type Max. conductor cross section FM Power supply system

? Test standard: IEC 61643-11 / EN 61643-11 ? Monitoring of conductor and arrester via LED ? Inflammability class according to UL 94 V0 ? With remote signalling contact: break contact

EP C IT 3P/FM

Type 2 /class II

UN

230 V~

Uc

440 V~

Up

1.5 kV

Up

2.2 kV

tA

< 25 ns

In

15 kA

Imax 30 kA

125 A gG

TU

-40 - +80 ?C

stranded 35/fine stranded 25 mm?

16 mm?

4,0 Nm

polycarbonate (halogen-free) UL 94-V0 / yellow

IP 20

35 mm DIN rail (DIN EN 60715 )

250 V/2 A

break contact

1,5 mm?

3 phase IT systems

Order Data

Product Article-No.

EP C IT 3P/FM 38 15 11

We reserve the right to make alterations in style and form in line with technical development. The illustrations are non-binding. We do not assume liability for mistakes or printing errors. Copyright? LEUTRON GmbH 2020

Leutron GmbH, Gaussstr. 2 ? D-70771 Leinfelden-Echterdingen ? Tel. +49 (0) 711 94771-0 ? leutron.de

22.01.2020

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download