Building Material Product Data - Construction Submittal ...



OMG, Inc. April 2014

153 Bowles Road

Agawam, Massachusetts 01001

Toll Free 800-633-3800

Fax 413-821-0417

Website

E-mail info@

Product Guide Specification

Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The CSI Construction Specifications Practice Guide.

This section must be carefully reviewed and edited by the Architect to meet the requirements of the project and local building code. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.

Section numbers are from MasterFormat 2012 Update.

22 13 16

SANITARY WASTE AND VENT PIPING

Specifier Notes: This section covers OMG, Inc. “Tubos” vent pipe extention. Consult OMG, Inc. for assistance in editing this section for the specific application.

1. GENERAL

1. SECTION INCLUDES

A. Vent pipe extension.

2. RELATED REQUIREMENTS

Specifier Notes: Edit the following list of related sections as necessary. Limit the list to sections with specific information that the reader might expect to find in this section, but is specified elsewhere.

A. Section 22 13 00 – Facility Sanitary Sewerage.

B. Section 22 13 19 – Sanitary Waste Piping Specialties

3. REFERENCES

A. ASTM International (ASTM):

1. ASTM C 920 - Specification for Elastomeric Joint Sealants.

2. ASTM D 2564 – Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems.

3. ASTM D 2665 – Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings.

4. ASTM F 656 – Standard Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings.

B. International Association of Plumbing and Mechanical Officials (IAPMO):

1. Universal Plumbing Code (cUPC US and Canada) approvals.

C. National Roofing Contractors Association (NRCA):

1. NRCA Roofing Manual, Latest Edition.

D. NSF International (NSF):

1. NSF/ANSI 14 - Plastics Piping Systems Components and Related Materials.

4. SUBMITTALS

Specifier Notes: Edit submittal requirements as necessary. Delete submittals not required.

A. Comply with Section 01 33 00 – Submittal Procedures.

B. Product Data: Submit manufacturer’s product data, including installation instructions.

C. Shop Drawings: Submit manufacturer’s shop drawings, including plans, elevations, sections, and details, indicating dimensions, materials, hardware, and installation layout including sizes and spacing.

D. Samples: Submit manufacturer’s sample of vent pipe extension.

E. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.

F. Warranty Documentation: Submit manufacturer’s standard warranty.

5. QUALITY ASSURANCE

A. Comply with NSF/ANSI 14, "Plastics Piping Systems Components and Related Materials," for plastic piping components.

B. Comply with flashing requirements shown in NRCA Roofing Manual.

6. DELIVERY, STORAGE, AND HANDLING

A. Delivery and Acceptance Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.

B. Storage and Handling Requirements:

1. Store and handle materials in accordance with manufacturer’s instructions.

2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.

3. Store materials in clean, dry area indoors.

4. Protect materials during storage, handling, and installation to prevent damage.

2. PRODUCTS

1. MANUFACTURER

A. OMG, Inc., 153 Bowles Road, Agawam, Massachusetts 01001. 800-633-3800. Fax 413-821-0417. . info@.

2. VENT PIPE EXTENSION

A. Vent Pipe Extension: “OMG Tubos”.

Specifier Notes: Specify size of existing vent pipe.

1. Size: [2 inches] [3 inches] [4 inches] [Indicated on the Drawings].

2. Roof Vent Pipe Extension: Solid-wall PVC fitting consisting of pipe and splice sleeve inserts, configured for insertion and sealing to existing plumbing vent piping, sized to fit inside diameter of plumbing vent piping, enabling extension of piping to field-determined height:

a. Material: Solid-wall PVC, white.

b. Splice Sleeve Insert:

1) [6 inches] Length at both ends of precut extension.

2) Outside Diameter [1 ¾ inches] [2 ¾ inches] [3 ¾ inches]

c. Length:

1) Overall Length: 28 inches.

2) Net Usable Length: 16 inches. Excluding Splice Sleeve Inserts.

d. Sealant: Single-Component, Nonsag, Urethane Joint Sealant: ASTM C 920, Type S, Grade NS, Class 25, for Use NT, and acceptable to roofing membrane manufacturer.

3. EXECUTION

1. EXAMINATION

A. Examine each plumbing vent piping location to determine required plumbing vent pipe extensions based upon minimum finished height requirements and measured existing conditions. Indicate plumbing vent pipe extensions on shop drawings.

B. Notify Architect of conditions that would adversely affect installation or subsequent use.

C. Do not begin installation until unacceptable conditions are corrected.

2. PREPARATION

A. Remove existing flashing from plumbing vent piping to extent required to enable installation of new plumbing vent pipe extensions and completion of flashings.

B. Clean plumbing vent piping to ensure that joint surfaces are clean, dry, and free from contamination including dirt, oils, grease, tar, wax, rust, and other substances that may inhibit adhesive or sealant performance.

3. INSTALLATION

A. Insert end of plumbing vent pipe extension into existing plumbing vent piping.

1. Verify circumference of existing plumbing vent piping and plumbing vent pipe extension is appropriate to achieve secure, rigid installation.

2. Mark plumbing vent pipe extension at required height above finished roof surface level, and cut to required length.

3. Apply adhesive or sealant to plumbing vent piping as appropriate to existing pipe material and plumbing vent pipe extension, and mate plumbing vent pipe extension to existing piping. Apply adequate adhesive or sealant to achieve secure, rigid installation.

B. Flashing: Comply with primary roofing material manufacturer’s published recommendations for installation of approved pipe flashings. Match existing flashing materials unless otherwise directed.

4. PROTECTION

A. Repair or replace defective work, including loose plumbing vent extensions, or unsecured flashings or flashings that are not weather-tight.

END OF SECTION

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download