Disasters are not merely ornamental or interesting events ...
Session No. 9
Course Title: Comparative Emergency Management
Session 9: Risk Assessment, Analysis, and Evaluation
Time: 3 hr
Objectives:
1. Provide a Detailed Definition and Description of Risk in the Context of the Emergency Management Profession.
2. Provide a background on the various forms of consequences considered in a hazard risk assessment and analysis.
3. Explain how Likelihood and Consequence may both be represented as either qualitative or quantitative values.
4. Describe the Process by which Hazard Likelihood and Consequence are Analyzed.
5. Explain how Individual Risks are Evaluated in a Standardized Format.
6. Explore Examples of Risk Management in Practice
Scope:
During this session the instructor will introduce the concept of risk and its two components: likelihood and consequence. This will lead to a discussion on the assessment and analysis of risk using qualitative and quantitative systems of measurements, and risk matrices to compare assessed risks. Risk acceptability assessment methodologies will also be presented in this context. Finally, a brief introduction to risk evaluation methodologies used by different governments will be provided.
Readings:
Student Reading:
Coppola, Damon P. 2006. Introduction to International Disaster Management. Butterworth Heinemann. Burlington. Pp. 113-119 (‘Risk and Vulnerability’).
Gabriel, Paul. 2009. Victoria’s state-level emergency risk assessment method. Australian Journal of Emergency Management. Vol 24, No. 1. February. (084A3429FD57AC0744737F8EA134BACB)~Victoria+s+state+level+emergency+risk+assessment+method.PDF/$file/Victoria+s+state+level+emergency+risk+assessment+method.PDF
Instructor Reading:
Coppola, Damon P. 2006. Introduction to International Disaster Management. Butterworth Heinemann. Burlington. Pp. 113-119 (‘Risk and Vulnerability’).
Gabriel, Paul. 2009. Victoria’s state-level emergency risk assessment method. Australian Journal of Emergency Management. Vol 24, No. 1. February. (084A3429FD57AC0744737F8EA134BACB)~Victoria+s+state+level+emergency+risk+assessment+method.PDF/$file/Victoria+s+state+level+emergency+risk+assessment+method.PDF
General Requirements:
Power point slides are provided for the instructor’s use, if so desired.
It is recommended that the modified experiential learning cycle be completed for objectives 9.1 – 9.6 at the end of the session.
General Supplemental Considerations:
Risk management is a practice that spans many fields and many disciplines. Students may have knowledge or even experience with risk management from a variety of fields, including business, finance, medicine, education, insurance, and many others. In each of these, the practice serves a similar but unique and subject-specific purpose that has evolved to address the needs of that field, so the lexicon and methods differ as a result. But in every case the goal of risk management is the measurement and comparison of identified hazards for the purposes of most effectively reducing their likelihood or consequences. This instructor may want to begin this session by having students explain their concepts and knowledge of risk management in order to build a baseline of understanding that may be used to frame the remarks of this lecture. By employing comparisons of risk management examples from disciplines that students understand to risk management examples in the emergency management context, the instructor may be able to provide an increased degree of context and understanding than by using these remarks alone.
Objective 9.1: Provide a Detailed Definition and Description of Risk in the Context of the Emergency Management Profession.
Requirements:
Provide an overview of risk in the context of emergency management. Explain how risk affects individually and collectively. Define a formula by which distinct risks may be calculated and thus compared.
Remarks:
I. Risk is an unavoidable part of life. It affects all people and all communities without exception, irrespective of geographic or socioeconomic limits (See Slide 9-3).
II. Every economic, social, policy, or political action or choice made by government and its constituents, and the businesses that operate in those communities, involves specific, often unknown, factors of risk.
III. For these risks, full risk avoidance is generally impossible. Risk affects us as individuals and collectively as groups, populations, communities, or even nations.
A. Individual risk
1. On the individual level, each person is primarily responsible for managing risk as he or she sees fit.
2. Management of individual risks may fall into either of the following categories:
i. Obligatory. An examples includes automobile speed limits
ii. Optional. An example includes fire extinguishers in the home
B. Collective Risk
1. Citizens collectively face risks as nations or societies from a range of larger-scale, wide-reaching hazard risks.
2. Collective risk results in fewer absolute total numbers injuries and fatalities than individually faced hazards over the course of each year.
3. However, they are often perceived by governments as being much more significant because of the following two reasons:
i. They have the potential to result in many deaths, injuries, or damages in a single event or series of events.
ii. The risk associated with these hazards cannot be mitigated through individual action.
4. In fact, some of these collective hazards are so great that, when they occur, they result in such devastation that the capacity of local response mechanisms is overwhelmed.
i. This, by definition, is a disaster.
ii. For these large-scale hazards, vulnerability is most effectively reduced by disaster management efforts collectively, as a society.
iii. For most, though not all of these hazards, it is the government’s responsibility to manage, or at least guide the management of, hazard risk reduction measures.
iv. And when these hazards do result in disaster, it is likewise the responsibility of governments to respond to them and aid in the following recovery.
C. The instructor can illustrate the concept of individual and collective hazards by making two columns on the board with the headings, “Individual” and “Collective”, and then having the students list hazards one by one and determining which column they fall under.
1. While there may be hazards for which there is crossover, most will fall under one or the other as determined by whether a single hazard event affects one or many people at each incidence.
2. For instance, heart disease is an individual hazard despite that it affects millions each year because each individual case is distinct from the rest. Automobile accidents have crossover possibilities because there are auto accidents that affect one and others that affect dozens of people. Finally, hazards such as earthquakes or hurricanes are exclusively collective in nature.
3. Ask the Students, “Can you think of some individual hazards that cause more deaths in an average year than most (if not all) collective hazards?
i. There are numerous examples that would fit into this category, including automobile accidents, heart disease, food poisoning, falls down stairs, and suicide, for example.
ii. In some countries, in some years, there may be situations where a collective hazard outpaces the major individual hazards, but these events will not maintain high levels of fatalities from year to year as the individual hazards do.
iii. For leading causes of death in the United States, visit the CDC website Leading Causes of Death page ()
IV. Risk Defined
A. Risk is defined as the interaction between two factors that characterize each hazard, namely (See Slide 9-4):
1. Hazard likelihood
2. Hazard Consequence
B. Risk, according to this definition, can be illustrated through the equation that states it is the likelihood of an event occurring multiplied by the consequence of that event, were it to occur.
1. RISK = LIKELIHOOD × CONSEQUENCE
2. In this definition, “Likelihood” can be given as a probability or a frequency, whichever is appropriate for the analysis under consideration.
i. Frequency refers to the number of times an event will occur within an established sample size over a specific period of time. Quite literally, it tells how frequently an event occurs. For instance, the frequency of auto accident deaths in the United States averages around 1 per 300 million miles driven (Wilson, 1979).
ii. Probability refers to single- event scenarios. Its value is expressed as a number between 0 and 1, with 0 signifying a zero chance of occurrence, and 1 signifying certain occurrence. Using the auto accident example, in which the frequency of death is 1 per 300 million miles driven, we can say that the probability of a random person in the United States dying in a car accident equals .000001 if he or she was to drive 300 miles.
3. This formula may be used by emergency managers to determine the likelihood and the consequences of each hazard according to a standardized method of measurement.
4. Identified hazard risks thus can be compared to each other and, therefore, ranked according to severity.
5. This ranking of risks, or risk evaluation as it is often called, allows us to determine which treatment (mitigation and preparedness) options are the most effective, most appropriate, and provide the most benefit per unit of cost. Not all risks are equally serious, and risk analysis can provide a clearer idea of these levels of seriousness.
Supplemental Considerations
N/a
Objective 9.2: Provide a background on the various forms of consequences considered in a hazard risk assessment and analysis
Requirements:
Lead a lecture that describes to students the various ways in which hazard consequences may be measured, including direct and indirect and tangible and intangible losses. Facilitate student discussions about these categories.
Remarks:
I. The consequence component of risk generally describes the effects a hazard may have on humans, built structures (including infrastructure and the economy), and the environment.
II. There are three primary factors examined when determining the consequences of a disaster (See Slide 9-5):
A. Deaths/fatalities (human)
B. Injuries (human)
C. Damages (cost, reported in currency, generally US dollars for international comparison)
III. Consequence categories may be further divided in order to better capture the sum total of all disaster consequences tied to a specific event.
IV. Two of the most common distinctions include:
A. Direct vs. indirect losses
1. Direct losses, as described by Keith Smith in his book Environmental Hazards are “those first order consequences which occur immediately after an event, such as the deaths and damage caused by the throwing down of buildings in an earthquake” (1992) (See Slide 9-6).
2. Examples of direct losses are:
i. Fatalities
ii. Injuries (the prediction of injuries is often more valuable than the prediction of fatalities, because the injured will require a commitment of medical and other resources for treatment [UNDP, 1994])
iii. Cost of repair or replacement of damaged or destroyed public and private structures (buildings, schools, bridges, roads, etc.)
iv. Relocation costs/temporary housing
v. Loss of business inventory/agriculture
vi. Community response costs
vii. Cleanup costs
3. Indirect losses (also as described by Smith, 1992) may emerge much later and may be much less easy to attribute directly to the event. Examples of indirect losses include (See Slide 9-7):
i. Loss of income
ii. Reductions in business/personal spending (“ripple effects”)
iii. Loss of institutional knowledge
iv. Mental illness
v. Loss of community services
B. Tangible vs. Intangible Losses
1. Tangible losses are those for which a dollar value can be assigned. Generally, only tangible losses are included in the estimation of future events and the reporting of past events. Examples of tangible losses include (See Slide 9-8):
i. Cost of building repair/replacement
ii. Response costs
iii. Loss of inventory
iv. Loss of income
2. Intangible losses are those that cannot be expressed in universally accepted financial terms. This is the primary reason that human fatalities and human injuries are assessed as a separate category from the cost measurement of consequence in disaster management. These losses are almost never included in damage assessments or predictions. Examples of intangible losses include (See Slide 9-9):
i. Cultural losses
ii. Stress
iii. Mental illness
iv. Sentimental value
v. Environmental losses (aesthetic value)
C. Although it is extremely rare for benefits to be included in the assessment of past disasters or the prediction of future ones, it is undeniable that they can exist in the aftermath of disaster events.
1. Like losses, gains can be categorized as direct or indirect, tangible or intangible.
2. Examples of tangible, intangible, direct, and indirect gains include:
i. Decreases in future hazard risk by preventing rebuilding in hazard-prone areas
ii. New technologies used in reconstruction that results in an increase in quality of services
iii. Removal of old/unused/hazardous buildings
iv. Jobs created in reconstruction
v. Greater public recognition of hazard risk
vi. Local/state/federal funds for reconstruction or mitigation
vii. Environmental benefits (fertile soil from a volcano, for example)
V. Ask the students to describe a hazard scenario (such as an earthquake, tsunami, or terrorist attack, for instance). Have them make a list of consequences on the board. Then, indicate for each consequence whether it is direct or indirect, and tangible or intangible. Students should be able to explain why each categorization was assigned.
Supplemental Considerations
N/a
Objective 9.3: Explain how Likelihood and Consequence may both be represented as either qualitative or quantitative values.
Requirements:
Provide a lecture on the determination of qualitative and quantitative risk likelihood and consequence values, and provide illustrative examples of qualitative systems used to represent ranges of quantitative risk factors.
Remarks:
I. In order to be assessed and analyzed, risks must be determined according to their likelihood and consequence values.
II. There are many ways by which this can be performed. These methods are divided into two primary categories of analysis:
A. Quantitative analysis (See Slide 9-10)
1. Quantitative analysis uses mathematical and/or statistical data to derive numerical descriptions of risk.
2. Quantitative analysis gives a specific data point (dollars, probability, frequency, or number of injuries/fatalities, for example)
B. Qualitative analysis (See Slide 9-11)
1. Qualitative analysis uses defined terms (words) to describe and categorize the likelihood and consequences of risk.
2. Qualitative analysis allows each qualifier (word) to represent a range of possibilities.
C. It is often cost and time prohibitive, and is often not necessary, to find the exact quantitative measures for the likelihood and consequence factors of risk.
D. Qualitative measures, on the other hand, are much easier to determine, and require less time, money and, most importantly, expertise to conduct.
E. For this reason, the use of qualitative measures of risk factors is often the preferred choice by emergency managers.
III. The following provides a general explanation of how qualitative and measurement may be applied to the likelihood and consequence components of risk.
A. Quantitative Representation of Likelihood
1. As stated previously, likelihood can be derived as either a frequency or a probability. A quantitative system of measurement exists for each of these.
2. For frequency, this number indicates the number of times a hazard is expected to result in an actual event over a chosen time frame. Examples include:
i. 3 times per year
ii. 1 time per decade
iii. 10 times a week
3. Probability measures the same data, but the outcome is expressed as a measure between 0 and 1, or as a percentage between 0% and 100%, representing the chance of occurrence. Examples include:
i. A 50-year flood has a 1/50 chance of occurring in any given year, or a probability of 2% or .02.
ii. An event that is expected to occur 2 times in the next 3 years has a .66 probability each year, or a 66% chance of occurrence.
B. Qualitative Representation of Likelihood
1. Likelihood can also be expressed using qualitative measurement, using words to describe the chance of occurrence. Each word or phrase has a designated range of possibilities attached to it.
2. For instance, events could be described as follows:
i. Certain. >99% chance of occurring in a given year (1 or more occurrences per year)
ii. Likely. 50–99% chance of occurring in a given year (1 occurrence every 1 to 2 years)
iii. Possible. 5–49% chance of occurring in a given year (1 occurrence every 2 to 20 years)
iv. Unlikely. 2–5% chance of occurring in a given year (1 occurrence every 20 to 50 years)
v. Rare. 1–2% chance of occurring in a given year (1 occurrence every 50 to 100 years)
vi. Extremely rare. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- qualitative research critique
- reliability analysis stanford university
- basic methods of policy analysis and planning
- conducting key informant interviews
- abraham s fischler college of education and school of
- research methods for management
- disasters are not merely ornamental or interesting events
- phases of research process cashp
- critical review form qualitative studies
Related searches
- interesting events to write about
- are you type a or b
- are humans inherently good or bad
- most interesting events in history
- loans that are not scams
- what are you up to or too
- names that are not common
- what countries are not in debt
- why annuities are not good
- pictures that are not photoshopped
- interesting events in history
- why grades are not important