Quick Start Guide: Rosemount 3051 Pressure Transmitter and ...

Quick Start Guide 00825-0100-4007, Rev HA

January 2020

RosemountTM 3051 Pressure Transmitter and Rosemount 3051CF Series Flow Meters with 4-20 mA HART? Revision 5 and 7 Protocol

Scan here for product documentation and drawings.

Quick Start Guide

January 2020

Safety messages

Note Before installing the transmitter, confirm the correct device driver is loaded on the host systems. See System readiness.

NOTICE

This guide provides basic guidelines for Rosemount 3051 Transmitters. It does not provide instructions for configuration, diagnostics, maintenance, service, troubleshooting, Explosion-proof, Flameproof, or intrinsically safe (I.S.) installations. Refer to Rosemount 3051 HART Revision 5 and 7 Reference Manual for more instructions. This manual is also available electronically at Rosemount.

WARNING

Explosions Explosions could result in death or serious injury.

Installation of device in an explosive environment must be in accordance with appropriate local, national, and international standards, codes, and practices. Review Product certifications for any restrictions associated with a safe installation. Before connecting a handheld communicator in an explosive atmosphere, ensure the instruments are installed in accordance with intrinsically safe or non-incendive field wiring practices. In an explosion-proof/flameproof installation, do not remove the transmitter covers when power is applied to the unit.

Process leaks Process leaks may cause harm or result in death. To avoid process leaks, only use the O-ring designed to seal with the corresponding flange adapter.

Electrical shock Electrical shock can result in death or serious injury. Avoid contact with the leads and terminals. High voltage that may be present on leads can cause electrical shock.

Physical access Unauthorized personnel may potentially cause significant damage to and/or misconfiguration of end users' equipment. This could be intentional or unintentional and needs to be protected against. Physical security is an important part of any security program and fundamental to protecting your system. Restrict physical access by unauthorized personnel to protect end users' assets. This is true for all systems used within the facility.

2

Rosemount 3051

January 2020

Quick Start Guide

CAUTION

Conduit/cable entries

Unless otherwise marked, the conduit/cable entries in the housing enclosure use a ??14 NPT form. Only use plugs, adapters, glands, or conduit with a compatible thread form when closing these entries. Entries marked M20 are M20 x 1.5 thread form. On devices with multiple conduit entries, all entries will have the same thread form. When installing in a hazardous location, use only appropriately listed or Ex certified plugs, glands, or adapters in cable/conduit entries.

Contents System readiness......................................................................................................................... 5 Transmitter installation................................................................................................................ 6 Safety instrumented systems installation................................................................................... 25 Product certifications................................................................................................................. 26

Quick Start Guide

3

Quick Start Guide

January 2020

4

Rosemount 3051

January 2020

Quick Start Guide

1 System readiness

1.1 Confirm HART Revision capability

? If using HART based control or asset management systems, confirm the HART capability of those systems prior to transmitter installation. Not all systems are capable of communicating with HART Revision 7 protocol. This transmitter can be configured for either HART Revision 5 or 7.

? For instructions on how to change the HART Revision of your transmitter, see Switch HART Revision mode.

1.2 Confirm correct device driver

? Verify the latest Device Driver (DD/DTMTM) is loaded on your systems to ensure proper communications.

? Download the latest DD at or

? In the Browse by Member dropdown menu, select Rosemount business unit of EmersonTM.

? Select desired product.

Table 1-1: Rosemount 3051 Device Revisions and Files

Release date

April 2012 January 1998

Device identification

NAMUR software revision(

1)

HART hardware revision(1)

1.0xx

1.0xx

N/A

N/A

Device driver identification

Review Review

instructi function

ons

ality

HART software revision(

2)

HART

Device

universal revision(

revision 3)

Manual docume nt number

Change descripti on

01

7

5

10

00809-01 (4)

9

00-4007

178

5

3

00809-01 N/A

00-4001

(1) NAMUR Revision is located on the hardware tag of the device. Differences in level 3 changes, signfied above by xx, represent minor product changes as defined per NE53. Compatibility and functionality are preserved, and you can use the product interchangeably.

(2) You can read the HART software revision with a HART capable configuration tool. Value shown is minimum revision that could correspond to NAMUR Revisions.

(3) Device Driver file names use Device and DD Revision, e.g., 10_01. HART Protocol is designed to enable legacy device driver revisions to continue to communicate with new HART devices. To access new functionality, you must download the new Device Driver. Emerson recommends downloading new Device Driver files to ensure full functionality.

(4) HART Revision 5 and 7 selectable, power diagnostics, safety certified, LOI, process alerts, scaled variable, configurable alarms, expanded engineering units.

Quick Start Guide

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download