Compatible: PlayStation®3 / PC

Compatible: PlayStation?3 / PC

User Manual

TECHNICAL FEATURES 1 2 digital gearshift levers (UP and DOWN) 2 LED 3 Action buttons 4 D-Pad

5 "SE" and "ST" buttons: - for Select and Start - for programming

6 "Home" button for PlayStation?3 7 USB selector ("PC" / "PS3")

1/10

8 Pedal cable 9 RJ45 connector for pedal set 10 Table clamp

11 Clamp screw 12 USB connector (for PC and

PlayStation?3) 13 Pedal set

INSTALLING THE WHEEL Fixing the wheel in place 1. Place the wheel on a table or other flat surface. 2. Place the clamp screw (11) in the table clamp (10) and then screw the clamping unit into the hole on

the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as you risk damaging the clamping unit and/or the table.

Connecting the pedal set 1. Connect the pedal cable (8) to the wheel's RJ45 connector (9).

For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet.

THRUSTMASTER? DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.

2/10

PLAYSTATION?3

INSTALLATION ON PLAYSTATION?3 1. Set the wheel's USB selector (7) to the "PS3" position. 2. Connect the USB connector (13) to a USB port on your console. 3. Turn on your console. 4. Launch the game. You are now ready to play!

USING THE "HOME" BUTTON (6) Your wheel's "Home" button allows you to exit games and access your PlayStation?3 system's menus.

IMPORTANT NOTES ON PLAYSTATION?3 - The wheel's USB selector (7) must always be set to the "PS3" position before connecting your wheel. - In "1 Player" mode: If your official gamepad is turned on, you will have to switch it to "controller port 2" in

order for your wheel to be functional. - On PlayStation?3, the wheel is only compatible with PlayStation?3 games (and will not function with

PlayStation? 2 games). - In certain racing games, do not hesitate to test out your wheel's 2 sensitivity modes in order to optimize its precision and responsiveness.

"Gran Turismo? 5 PS3TM" configuration procedure for the "FERRARI? GT EXPERIENCE" racing wheel By default in this game, acceleration and braking are not assigned to the "R2/L2" buttons and switching gears is not assigned to the "R1/L1" buttons (which is the case for the pedals and Up/Down levers on the "Ferrari? GT Experience" racing wheel). Procedure to configure and optimize the wheel: (This procedure only needs to be carried out once, as the changes will then be saved in the game)

1) Start up your game. 2) Go to the OPTION menu. 3) Go to the CONTROLLER SETUP menu (by clicking the symbol representing the gamepad and the D-Pad). 4) Configure your controller as follows: ? Accelerate on R2 ? Brake on L2 ? Shift Up on R1 ? Shift Down on L1 ? Rear View on L3 and/or R3 ? Left & Right View on D-Pad Left & Right

3/10

5) Click OK (in the lower right part of your screen). 6) Return to the main menu to access the track of your choice. You are now ready to play! Note: The steering wheel on your "Ferrari? GT Experience" racing wheel features 2 sensitivity modes (normal or high). To achieve optimal precision in "Gran Turismo? 5 PS3TM", we recommend that you enable "high sensitivity" mode.

PC

Installation on PC The CD-ROM included with this product allows you to install the "Vibration Feedback" drivers.

1. Set the wheel's USB selector (7) to the "PC" position. 2. Insert the installation CD-ROM into your CD-ROM drive. Follow the on-screen instructions to install

the "Vibration Feedback" drivers. Once the installation is complete, click Finish and restart your computer. 3. Once your computer has restarted, connect the USB connector (13) to one of your computer's USB ports. Windows? XP or Vista will automatically detect the new device. 4. Driver installation Drivers are installed automatically. Follow the on-screen instructions to complete the installation. 5. Click Start/Settings/Control Panel and then double-click Game Controllers (or Gaming Options, depending on your operating system).

The Game Controllers dialog box displays the wheel's name with OK status. 6. In the Control Panel, click Properties to configure your gamepad:

? Test device: Allows you to test and visualize the buttons, D-pad and axes of the wheel and pedal set.

? Test forces: Allows you to test 8 vibration effects and configure effect and vibration settings.

You are now ready to play!

IMPORTANT NOTES ON PC

- The wheel's USB selector (7) must always be set to the "PC" position before connecting your wheel. - Your wheel and pedals automatically self-calibrate upon connection of the USB connector. In the event

of any problems, you can also carry out manual calibration by downloading the "Thrustmaster Calibration Tool" software, available at the following address:

4/10

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download