RAMFAN - DCPPE



UPDATED: Nov 2012

FAN, PORTABLE WATER DRIVEN BLOWER (RAMFAN)

FOR USS      

DATE:     

Ref: (a) MIP 6641/006; Damage Control Repair Stations, PMS MRC R-7 Clean and Flush Portable Water Driven Blower,

Inspect Portable Water Driven Blower.

(b) MIP 6641/006, Damage Control Repair Stations, PMS MRC R-14, Inspect and Test Water Driven Blower

Grounding Device

(c) OEM (EURAMCO) WF-20 RAMFAN Operation Manual

| |Ref |SAT/ UNSAT|SAT/ UNSAT|SAT/ UNSAT|SAT/ UNSAT|SAT/ UNSAT|

|A. FAN INSPECTION | | | | | | |

|2. Is the gasket/strainer free of cuts or damage? |Ref (a) |      |      |      |      |      |

|3. Is the gasket/strainer clean and clog free? |Ref (a) |      |      |      |      |      |

|4. Do the threads to each hose connection inlet/outlet have a light coat |Ref (a) |      |      |      |      |      |

|of silicone? | | | | | | |

|5. Are any of the hose threaded connections damaged (i.e. gouged or |Ref (a) |      |      |      |      |      |

|flattened)? | | | | | | |

|B. FAN GROUNDING DEVICE: | | | | | | |

|2. Is the measured resistance of the grounding 1 OHM or less? |Ref (b) |      |      |      |      |      |

|Note: If the grounding device resistance is greater than 1 OHM remove fan| | | | | | |

|from service. | | | | | | |

|C. OPTEST FAN: | | | | | | |

|2. Was there any indication of internal leakage i.e. water being emitted |Ref (c) |      |      |      |      |      |

|from the turbine? | | | | | | |

|3. Excessive noise, vibration or indication of internal bearing failure?|Ref (c) |      |      |      |      |      |

|Turbine wheel should be a smooth, gradual build up in noise pitch and | | | | | | |

|turbine speed, with a corresponding increase in air flow. | | | | | | |

|REMARKS: |

|      |

| |

| |

| |

Assessor(s):                        

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download