Veterans Affairs



FedBizOppsCombined Synopsis/Solicitation Notice*******CLASSIFICATION CODESUBJECTCONTRACTING OFFICE'SZIP-CODESOLICITATION NUMBERRESPONSE DATE (MM-DD-YYYY)ARCHIVEDAYS AFTER THE RESPONSE DATERECOVERY ACT FUNDSSET-ASIDENAICS CODECONTRACTING OFFICEADDRESSPOINT OF CONTACT(POC Information Automatically Filled fromUser Profile Unless Entered)DESCRIPTION*See AttachmentAGENCY'S URLURL DESCRIPTIONAGENCY CONTACT'S EMAILADDRESSEMAIL DESCRIPTIONADDRESSPOSTAL CODECOUNTRYADDITIONAL INFORMATIONGENERAL INFORMATIONPLACE OF PERFORMANCE* = Required FieldFedBizOpps Combined Synopsis/Solicitation NoticeRev. March 201065EQUIPMENT FOR ARF - $79,259.5844131VA250-14-Q-082909-18-201460N2423490Department of Veterans AffairsNetwork Contracting Office (NCO) 106150 Oak Tree Blvd., Suite 300Independence OH 44131PRINCE MEREDITHLOUIS STOKES VA MEDICAL CENTER10701 EAST BLVDCLEVELAND, OHIO44106USA MEDICAL CENTERprincelliott.meredith@contract specialistLine: MAC-GA-F10D-16001MACS GA Frame Dbl Sided 160 Cg160 Gentle-Air mouse cage frame. Frame includes upper main supply andexhaust plenums. Plenums are removable for cleaning. Plenums are made of22 gauge stainless steel.Approximate overall frame dimensions: 33"D X 72.45"W X 82.5"HApproximate frame weight: 160 lbsHolds up to 16 mouse cage stacks 10 high, 160 cages.Stainless steel. T304 18 gauge wall, 1" square tube frame.Rugged 5" casters with zerks, 2 casters with brakes.1 round tube handle on each end within frame for hand protection.Frame and plenums are autoclavable.2 ea Part: Rev:Line: MAC-RV-F6S-6002MACS Rat Frame Single-Side 3636 rat cage single-sided frame. Frame will house mouse or rat caging. Frameincludes upper main supply and exhaust plenums. Plenums are removable forcleaning. Plenums are made of 22 gauge stainless steel.Approximate overall frame dimensions: 28"D X 72.45"W X 82.5"HApproximate frame weight: 100 lbsHolds up to 6 rat cage stacks 6 high, 36 cages.Stainless steel. T304 18 gauge wall, 1" square tube frame.Rugged 5" casters with zerks, 2 casters with brakes.1 round tube handle on each end within frame for hand protection.Frame and plenums are autoclavable.1 ea Line: MACS-AHU-TOP B003Air Handling UnitInterchangeable Air Handler Unit works with all MACS frames and cages,Top-mount placement. AHU includes, touch screen control panel for adjustingACH, filter loading indicators, visual and audio alarms for insufficient airflow,plug-in port for remote monitor capability, on/off switch, removable power cordsocket. One AHU will supply HEPA filtered air for up to 160 mouse cages or 60rat cages.Power cord has Type "B" three prong plug connection for 15A/125V, grounded(Part #14A00326).AHU and HEPA filters are not autoclavable.Supply AHU dimensions appx - 20.5"Wx14.25"Dx15.25"HExhaust AHU dimensions appx - 23.25"Wx14.25"Dx15.25"H24X17X21 76#3 ea Line: MAC-GA-V10-6575 A004MACS Gentle-Air Vertical StackApproximate Dimensions per stack: 8.25"W x 13.75"D x 72"HApproximate Weight: 18 lbs.The Gentle-Air vertical mouse cage stack is 10 cages high. This stack holdseither Max75 style cages with 75 sq. in. floor for 5 adult mice or Dura and/or Unistyle 65 sq. in. floor cages with the spacer added to the yellow docking latch.Spacers are sold separately to this cage stack.The composite bracket is made from Amodel, a nylon with fiberglass filamentreinforcement for durability and strength.Each cage stack has a supply plenum side and an exhaust plenum. Cagebrackets are attached to the vertical stack and fold up for easy moving andstorage. Ends are open for easy cleaning.The stack body is made of 22 gauge stainless steel with brackets molded fromcomposite resin for durability. The stack is autoclavable.32 ea Line: MAC-RV-V6 D005MACS Rat 6 Cage Vertical StackApproximate Dimensions per stack: 10"W x 19.5"D x 72"HApproximate Weight: 21lbsThe standard Gentle-Air vertical rat cage stack is 6 cages high. This stack holdsstandard size DURA cages with about 143 sq. in. floor area.Each cage stack has a supply plenum side and an exhaust plenum. Cagebrackets are attached to the vertical stack and fold up for easy moving andstorage. Ends are open for easy cleaning.The stack body is made of 22 gauge stainless steel with 16 gauge brackets. Thestack is autoclavable.6 ea Part: Rev:Line: CH3X5HCT-3 F006Card Holder Clip Top Load Rev3Horizontal Clip Top, Stainless Steel Mouse Cage Card Holders. Designed to hold3" x 5" standard index card.Use with cages on the MACS-GA Modular Animal Caging System. Dura and Max75 cages. VTA71 tops.480 ea Line: CH3X5HHR-1007Cardholder - Horz Hanging RatHorizontal Hanging, Stainless Steel Rat Cage Card Holders. Designed to hold3" x 5" standard index card and fit over wire lid. Cardholder extends 1" from cagetop. Hanging tab is 1.25" wide.54 ea Line: 11A009830084" to 8" Transition for HoseA transition from 4" Hose to 8" Hose. Used when connecting Exhaust capturehoods to a facility that has 8" drops from the ceiling.Does not include hose or tightening clamps.3 ea Part: Rev:Line: RC71M-UD009Cage, Rodent Max UDA Udel polysulfone mouse cage that provides a full 75 square inches (484 sq.cm.) of floor space allowing maximum density for mice as specified by the ILARGuide. Autoclavable to 300 degrees Fahrenheit (150 C), strong chemicalresistance. Unique X-Flow design allows consistent resin flow during themolding process providing strength and durability for the life of the cage. Acceptsflat rim wire bars only. 20/case separated by tissue paper and a 4-way divider.Dimensions: 7-1/4" wide x 11-1/2" long x 5" deep (18.4 cm x 29.2 cm x 12.7 cm)Carton Size: 24" L x 16" W x 18" H; (cm:46 x 41 x 61) Carton Weight 21# 9.1 kg520 ea Line: VTA71D-UD-FT010GA Filter Vent Top UdelUdel polysulfone mouse vent top with filter for use with Gentle Air Ventilated RackSystem or MACS modular. Fits standard size 65 and 75 sq.in. mouse cages.Filter top with Reemay replacable filter paper. Autoclavable to 300 degrees F,(150 C). 20/case separated by tissue paper and a 2-way dividerCarton dimensions: 16X12X13 Carton weight 17 lbs.520 Part: Rev:Line: WL71F F011Wire Bar, Mouse FlatMouse Flat Rim Wire Bar Lid, High quality, produced using 304 Quarter HardStainless Steel resulting in an extra strong lid. Includes grommet and food dividerwhich folds down for stacking ease. Electropolished for longer life. Fits standardsize mouse cages and all 71 Series mouse cages, 20/case. Carton Size: 14" L x12" W x 9" H, Weight 21#520 ea Part: Rev:Line: WB16RHE-QT A01216 oz. RH Ext.WB 1/4 turn16 oz. reduced height water bottle, 1/4 turn- Bottle is clear polysulfone- Bottle is autoclavable up to 300 ? F.- Ounces and milliliters graduated measurements on each side.- Bottle is low profile wedge shape with #8.5 mouths for use with a ? turn externalbottle lid (TCN8.5-QT).534 ea Line: TCCN8.5-QT-ST2.5-SO013Cap Combo 8.5 nk 2.5 SO sipperTwist Cap for #8.5 bottle neck, neoprene seal with 2.5 straight open sipper tube534 ea Part: Rev:Line: RC88D-UD014Cage, Rat, UdelDura Udel polysulfone rat cage with reinforced corners, walls and rims for addedlife and durability. Autoclavable to 300 degrees Fahrenheit (150 C), strongchemical resistance, 10/case. Provides 141 square inches (910 sq. cm.) offloor space at 1" above cage floor. Unique X-Flow design allows consistent resinflow during the molding process providing strength and durability for the life of thecage. Dimensions: 10-1/4" wide x 18-3/4" long x 8" deep (26 cm x 47.6 cm x 20.3cm) Carton Size: 21" L x 20.5" W x 18" H, Weight: 33#54 ea Part: Rev:Line: VTA8X-UD B015Rat, Vent Filter Top AssemblyUdel polysulfone large mouse/rat filter top with one sheet replaceable filtermedia. Fits standard size large mouse or rat cage. 2 grommets with springdoors. To be used with rat or large mouse ventilated racks. Dimensions:10-3/4" x 19-1/4" x 3-1/4" (27.3cm x 48.9cm x 8.3cm). 10/case.Optional solid inserts for vent top available.54 ea Line: WL88F016Wire Bar, Rat FlatRat Flat Rim Wire Bar Lid - High quality, produced using 304 Stainless Steelresulting in a strong lid. Includes grommet and food divider which folds down forstacking ease. Electropolished for longer life. Fits Series 88 rat cages, 10/case.Carton Size: 20" L x 15" W x 11" H, Carton weight 20 lbs.54 ea Part: Rev:Line: Expiration Date: 22-Aug-1414A00348017Worm Drive 3-4" Hose Clamp3-4" Hose ClampWord DriveBand type 201 SSScrew/bolt Zinc-Plated SteelBand width 9/16Band thickness .022"10/pkg6 Pkg / eaPart: Rev:Line: 13A01166018Hose, 4" Red (Exhaust)15 feet / eaLine: MAC-EH-PVC019PVC Thimble Exhaust ConnectThimble exhaust connection for MACS AHU. The thimble connection allows forthe capture of exhaust air coming from the unit into the exhaust HVAC system ofthe facility. The thimble connection is constructed of PVC parts. Attach poly elbowto the exhaust AHU and a clamp to connect to the HVAC 4" flexible duct hose.Thimble connection allows for the capture of all of the exhaust air and a smallpercentage, relative to the exhaust, of room air.Includes 5' of flexible hose and heavy duty cable ties to connect thimble tobuilding exhaust ductwork.Can not withstand high heat. Not autoclavable. Do not put in high heat cagewash.3 each / eaPart: Rev:Line: CHE040302-R020The Club House - RedHigh-temperature Red Udel polysulfone club house for mice - Provides NestingEnvironment and Environmental Enrichment, Increased Cage Surface Area,Unique wood grain molded design, Stackable, autoclavable to 300 F.Approximate Overall Dimensions: 4.44" L x 3.2" W x 2.25" H. Solid UpperSurface Area: 3" x 2".Colorant: Solvent Red 179280 per case 18x13x12 31 pounds per case480 ea Line: RB6-30X24X18-WB0216 Cg Rabbit, 5.0 SF, Water Btl6 Cage Rabbit Unit - Stainless steel construction. The frame is 1" square and ismounted on 5" casters. The casters will have grease zerks and the front two willhave a step brake. The back and sides will have fixed wire panels constructed of.156 diameter wire with .25 diameter horizontal supports. The doors will behinged on the left side. The removable floors will be constructed of 3/8"polypropylene and will have ?" round edged holes on 1?" spacing. The centerdivider panel will be hinged so it may be raised to allow socialization and a 10 sqfoot cage. Only the floor will be constructed of polypropylene. The balance of thecage and rack will be constructed from type 304 stainless steel. The cages willallow 5 square feet per cage. Each cage will have a stainless steel wrapper,sloped on the bottom to divert the waste into the litter pans. Each unit will haveindividual 22 gauge stainless steel litter pans. The water system will be waterbottles, price included. Each unit will have 22 gauge stainless steel "J" typefeeders. Cage dimensions will be 30" W x 24" D x 18"T.Line: FREIGHT QUOTE022Freight QuoteUsed only to estimate Freight1 ea ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download