8407 spark-ignition reciprocal or rotary internal ...
8407 |spark-ignition recip or rotary int comb piston engine | |
|840710 |Aircraft Engines (Spark-ignition) |
|840721 |Outboard Motors |
|840729 |Other Marine Propulsion Engines (Spark-ignition) |
|840731 |Reciprocating Piston Engines for Vehicles, Not Exceeding 500cc |
|840732 |Reciprocating Piston Engines for Vehicles, Cylinder Capacity 50-250cc |
|840733 |Reciprocating Piston Engines for Vehicles, Cylinder Capacity 250-1,000cc |
|840734 |Reciprocating Piston Engines for Vehicles, Exceeding 1, 000cc |
|840790 |Other Spark-ignition Internal Combustion Piston Engines |
Indian Standards
|IS 5791 : 1986 |Technical Supply Conditions for Piston Rings for Internal Combustion Engines |
|IS 7793 : 1975 |Aluminium alloys for IC engine pistons |
|IS 8422 : Part I : |Specification for Piston Rings for IC Engines - Part I : Plain Compression Rings from 30 up to 200|
|1977 |mm Nominal Diameter R-Rings |
|IS 8422 : Part II :|Specification for Piston Rings for IC Engines - Part II : Taper Faced Compression Rings from 30 up|
|1977 |to 200 mm Nominal Diameter M-rings |
|IS 8422 : Part III |Specification for Piston Rings for IC Engines - Part III : Keystone Rings from 82 up to 200 mm |
|: 1977 |Nominal Diameter T-rings 15? |
|IS 8422 : Part 4 : |Specification for Piston rings for IC engines: Part 4 Napier oil scraper rings from 30 up to 200 |
|1977 |mm nominal diameter N-Rings |
|IS 8422 : Part 5 : |Specification for Piston rings for IC engines: Part 5 Stepped oil scraper rings from 30 up to 200 |
|1977 |mm nominal diameter Z-Rings |
|IS 8422 : Part 6 : |Specification for Piston rings for IC engines: Part 6 Slotted oil control rings from 50 up to 200 |
|1977 |mm nominal diameter S-Rings |
|IS 8422 : Part 7 : |Specification for Piston rings for IC engines: Part 7 Double bevelled slotted oil control rings |
|1977 |from 50 up to 200 mm nominal diameter G-Rings |
|IS 8422 : Part 8 : |Specification for Piston rings for IC engines: Part 8 Narrow land slotted oil control rings from |
|1977 |50 up to 200 mm nominal diameter D-Rings |
|IS 8422 : Part 9 : |Piston Rings for Internal Combustion Engines - Part 9 : Terms and Definitions |
|1986 | |
|IS 8503 : 1986 |Technical supply conditions for aluminium alloy pistons for internal combustion engines |
American Standards
ASME (American Society of Mechanical Engineers)
ASME PTC 17-1973 (R2003)
Performance Test Code – Reciprocating Internal-Combustion Engines
Provides rules for testing, and for the
computation & tabulation of the results of tests,
for all types of reciprocating internal
combustion engines, in order to determine
power & fuel consumption
ANSI/SAE J1996
RAPR98, Internal Combustion Engines - Piston Rings, Quality Requirements
ANSI/SAE J1997
RAPR98, Internal Combustion Engines – Piston Rings – Rectangular Rings
ANSI/SAE J1998 (RAPR98)
Internal Combustion Engines – Piston Rings – Rectangular Rings with Narrow Ring Width
ANSI/SAE J1999 (RAPR98)
Internal Combustion Engines – Piston Rings –Scraper Rings
ANSI/SAE J2000 (RAPR98)
Internal Combustion Engines – Piston Rings – Keystone Rings
ANSI/SAE J2001 (RAPR98)
Internal Combustion Engines – Piston Rings –Half Keystone Rings
ANSI/SAE J2002 (RAPR98)
Internal Combustion Engines – Piston Rings – Oil Control Rings
ANSI/SAE J2003 (RAPR98)
Internal Combustion Engines – Piston Rings –Coil Spring Loaded Oil Control Rings
ANSI/SAE J2004 (RAPR98)
Internal Combustion Engines – Piston Rings –Expander/Segment Oil Control Rings
ANSI/SAE J2226-APR98 (RMAY00),
Internal Combustion Engines – Piston Rings - Steel Rectangular Rings
International standards
IEC 60034-22 Ed. 1.0 b:1996
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
Establishes the principal characteristics of a.c. generators
under the control of their voltage regulators when used for
reciprocating internal combustion engine driven generating
sets. Supplements the requirements given in IEC 60034-1.
IEC 88528-11 Ed. 1.0 en:2004
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
"Specifies criteria, including performance and test methods, for
rotary uninterruptible power systems arising out of a
combination of mechanical and electrical rotating machines.
Applies to power supplies primarily designed for supplying
uninterrupted a.c. power to the consumer. "
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- chapter 10 long term strategy for visibility improvement
- 8407 spark ignition reciprocal or rotary internal
- original date 8 6 2012 north carolina
- tceq form op ua2 stationary reciprocating internal
- semiannual compliance report us epa
- initial notification form
- applicability flowchart for neshap for reciprocating
- nm eq equipment description and notification form
- customs and border protection
- discussed below are responses to questions posed in the
Related searches
- reciprocal category treasury
- new rotary engine design
- states with reciprocal teacher licenses
- 3 phase rotary converter
- reciprocal states with pa
- reciprocal insurance license
- electrical license reciprocal states
- tower mfg corp rotary switch
- tower rotary switches
- 12v rotary switches
- 5 position rotary switches
- rotary power switches