M*CARBO Ruger PC Carbine Extended Charging Handle

M*CARBO Ruger PC Carbine Extended Charging Handle

Download or Print Instructions | Contact: help@ | Page 1

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Step 1: Grab all the parts and tools you'll need for this build.

Step 2: Use your Allen Key to remove the screw in the Factory Charging Handle.

2.

1. Ruger PC Carbine

Extended Charging Handle

2. 5/32" Allen Key

1.

3.

3. Blue 242 Loctite

Step 3: Choose which side of the firearm you'd like to install the charging handle (the handle is ambidextrous).

Step 4: Open your MCARBO Extended Charging Handle.

M*CARBO Ruger PC Carbine Extended Charging Handle

Download or Print Instructions | Contact: help@ | Page 2

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Step 5: Place the new Charging Handle where the Factory one was

Step 6: Put a few dabs of Blue Loctite on your New Charging Handle Screw

Step 7: Drop the Screw into the Charging Handle and tighten it with your Allen Key.

Step 8: Use a Rag to wipe up any leftover Loctite.

M*CARBO Ruger PC Carbine Extended Charging Handle

Download or Print Instructions | Contact: help@ | Page 3

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

That's it! Happy Shooting!

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download