MIL-STD-2073 - Standard Practice for Military Packaging

MIL-STD-2073 - Standard Practice for Military Packaging

Subject/Scope:

This document outlines standard processes for the development and documentation of military packaging, as distinct from commercial packaging. This standard covers methods of preservation to protect materiel against environmentally induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation during storage, multiple handling, and shipment of materiel in the defense transportation system. A decision chart is included for determining the applicability of commercial or military packaging practices (see figure 1). If military packaging is applicable, figure 1 will further aid in the development of detailed packaging requirements.

Keywords:

Mil, container, packaging, type, requirement, material, class, unit, astm, method, preservation, military, sealed, document, packing, cushioning, shipping, wood, design, specification, document, pack, heat, rsc, category, size, government, corrosion, fiberboard, contract, reusable, protection, standard, storage, watervaporproof, barrier, style, greaseproof, level, grade, test, waterproof, flexible, method, resistant, fragility, drawing, requirement, system, desiccant, water, plastic, sealable, shock, identification, equipment

Published:

5/23/2008

Text in blue boxes such as this one is instructional and is intended to assist you in understanding the document.

Text in red boxes such as this explains changes made to the document by The Wooden Crates Organization.

Red text has been added to the document or modifies the document since its final version was officially published.

Soft Conversion of Imperial to Metric Conversions, when made, consider materials that are available in metric or imperial sizes rather than converting

sizes exactly. For example: Panelboard (plywood) in the US is typically 4 feet X 8 feet (1220 x 2440 mm) while panelboard in metric countries is typically 1200 X 2400 mm. Since the standard was developed based on readily

available materials these variations in material sizes could not have been practically considered.

The content of the document below has not been modified.

NOT MEASUREMENT SENSITIVE

MIL-STD-2073-1E 23 May 2008 SUPERSEDING MIL-STD-2073-1D 15 December 1999

DEPARTMENT OF DEFENSE

STANDARD PRACTICE FOR MILITARY PACKAGING

AMSC N7296

AREA PACK

MIL-STD-2073-1E FOREWORD

1. Details and decision logic for the use of this standard are described in 1.1, 1.2, figure 1, and 6.11.

2. This standard is approved for use by all Departments and Agencies of the Department of Defense.

3. For additional guidance on the contents of this document, contact the Commanding Officer, Naval Air Warfare Center Aircraft Division Lakehurst, (Code 6.7.2.4), Bldg. 596-2, Highway 547, Lakehurst, NJ 08733.

4. Comments, suggestions, or questions on this document should be addressed to: Commanding Officer, Naval Air Warfare Center Aircraft Division, (Code 41K000B120-3), Highway 547, Lakehurst, NJ 08733-5100, or email to michael.sikora@navy.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at .

ii

Paragraph

1. 1.1 1.2 1.2.1

2. 2.1 2.2 2.2.1 2.2.2 2.3 2.4

3. 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16

4. 4.1 4.1.1 4.2 4.3

MIL-STD-2073-1E

CONTENTS

Page

SCOPE ..............................................................................................................1 Purpose.........................................................................................................1 Applicability ................................................................................................1 Applicability determination .........................................................................1

APPLICABLE DOCUMENTS ........................................................................3 General .........................................................................................................3 Government documents ...............................................................................3 Specifications and standards........................................................................3 Other Government documents, drawings and publications .........................4 Non-Government publications.....................................................................5 Order of precedence.....................................................................................5

DEFINITIONS .................................................................................................6 General .........................................................................................................6 Categorization ..............................................................................................6 Common group items...................................................................................6 Consumable..................................................................................................6 Container Design Retrieval System (CDRS)...............................................6 Critical items................................................................................................6 Electrostatic Discharge Sensitive (ESDS) items .........................................7 Fragility factor .............................................................................................7 Hazardous material ......................................................................................7 Military packaging...................................................................................... 7 Packaging design validation ........................................................................8 Repairable item ............................................................................................8 Reusable container .......................................................................................8 Sealed ...........................................................................................................9 Selective group items...................................................................................9 Special group items......................................................................................9

GENERAL MILITARY PACKAGING REQUIREMENTS.........................10 General .......................................................................................................10 Options .......................................................................................................10 Development of military packaging details and data requirements.......... 10 Hazardous material ....................................................................................10

iii

Paragraph

4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12

5. 5.1 5.2 5.2.1 5.2.2 5.2.2.1 5.2.2.2 5.2.2.3 5.2.3 5.2.3.1 5.2.3.2 5.2.3.3 5.2.3.4

5.2.3.5

5.2.3.5.1 5.2.3.5.2 5.2.3.5.3 5.2.3.6

5.2.3.6.1 5.2.3.6.2 5.2.3.6.3 5.2.3.6.4 5.2.3.6.5

MIL-STD-2073-1E

CONTENTS (Continued)

Page

Packaging of classified items.....................................................................10 Quantity per unit pack (QUP) ....................................................................10 Containers ..................................................................................................10 Kits .............................................................................................................10 Repairable excess and residual parts .........................................................11 Loose fill materials ....................................................................................11 Shock and vibration absorption .................................................................11 Determination of item fragility ..................................................................11 Packaging materials ...................................................................................11

DETAILED MILITARY PACKAGING REQUIREMENTS........................11 General military package design considerations .......................................11 Military preservation..................................................................................12 Cleaning and drying...................................................................................12 Preservatives ..............................................................................................12 Preservative applicability...........................................................................12 Application of contact preservatives..........................................................12 Application and use criteria of volatile corrosion inhibitors (VCI)...........12 Methods of military preservation - general requirements..........................13 Surfaces coated with preservatives ............................................................14 Metal surfaces not coated with preservatives ............................................14 Method 10 - Physical protection................................................................14 Method 20 ? Physical protection with preservative (with greaseproof wrap, as required).............................................................15 Method 30 - Waterproof or waterproof-greaseproof protection with preservative ..........................................................................................15 Method 31 - Waterproof bag, heat sealed..................................................15 Method 32 - Container, waterproof bag, heat sealed.................................15 Method 33 - Greaseproof-waterproof bag, heat sealed............................. 16 Method 40 - Watervaporproof protection with preservative as required .......................................................................16 Method 41 - Watervaporproof bag, heat sealed.........................................16 Method 42 - Container, watervaporproof bag, heat sealed, container.......16 Method 43 - Floating watervaporproof bag, heat sealed ...........................17 Method 44 - Rigid container (other than metal), sealed ............................17 Method 45 - Rigid metal container, sealed ................................................17

iv

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download