STOCK WORK INDEX NEIDNER BUTT PLATE & GRIP CAP ...

STOCK WORK

takedown tools

STOCK WORK INDEX

Bedding Supplies . . . . . . . . . . . . . 412-418 Shaping/Inletting Tools. . . . . . . . . 411-412 Buttplates & Grip Caps. . . . . . . . . . 402-404 Stock Adjusters. . . . . . . . . . . . . . . 407-408 Checkering Supplies. . . . . . . . . . . 409-411 Stock Finishing Supplies. . . . . . . . 418-420 Fitting Jigs & Gauges. . . . . . . . . . . . . . 409 Stock Hardware. . . . . . . . . . . . . . . . . . . . 402 Recoil Pads. . . . . . . . . . . . . . . . . . . 404-407 Takedown Tools. . . . . . . . . . . . . . . . . . . 402 Recoil Reducers. . . . . . . . . . . . . . . 408-409

STOCK TAKEDOWN SET

All The Tools Needed To Prevent Split Stocks

The very best possible tools for removing most styles of buttstock bolts and action spring tube nuts. The thin-walled sockets are correct to prevent slipping and burring. The drag-link bit is round at the drive end, which automatically centers the blade in the stock bolt hole and makes fitting it into the slot about 1,000 times easier!! Plus, they work for other shop jobs, too. SPECS: Set - Includes T-handle, 9" (22.9cm) drive extension, (5) 3/8" (9.5mm) drive sockets, and drag link bit. Sockets & Drag Link - Includes all (5) drive sockets and drag link bit.

#080-809-000AT Stock Takedown Set, 8K95K82$107.99

#080-027-000AT T-Handle, 8K38N29 39.99

#080-212-010AT 9" Extension, only, 8K21C72 24.99

#080-212-006AT 6" Drive Extension, 8K16Q62 17.99

#080-809-001AT Sockets & Drag Link, only, 8K55N26 72.39

ALLAN FOUNDRY LEVER ACTION

ORIGINAL STYLE BUTTPLATE

Classic Shape & Look For Restoration Or New

Reproduced from original factory designs to look right when restoring an older gun or building a custom rifle. Curved, cast steel buttplate comes in-the-white, ready for final fitting and bluing. Marlin Lever Action/Winchester 1886 Hi-Wall models require drilling and counterboring screw holes. Universal model with pointed heel, similar to Neidner style, features counterbored screw holes for a flush-fit of installation screws. Mounting screws not included. ab SPECS: Steel. In-the-white. Marlin/Winchester - 41/2" (11.6cm) long, 15/16" (3.3cm) wide. Universal - 53/16" (13.2cm) long x 15/8" (4.1cm) wide. #011-002-100AT Marlin Buttplate, 1A24M65 $27.99

#011-002-101AT Winchester Buttplate, 1A24L65 27.99

#011-000-001AT Universal Buttplate, 1A25M23 29.99

STOCK INSERTS

Secure Mounting Of Sling Studs, Recoil Pads & Triggerguards In Wood Or Synthetic Stocks

CNC machined, threaded brass bushings Sling Stud

Insert

provide added strength and security for screwing down sling studs,

recoil pads, and triggerguards in wood, composite, and fiberglass

stocks. Lets you turn a screw in tight without the worry of stripping

it out of the stock material. Heavily knurled on the outside to hold

plenty of epoxy bedding for a rock-solid grip between the insert

and stock. Kit available for mounting sling studs, plus a 10-pak of

general-use inserts. ab

SPECS: Brass, knurled. 1/2" (12.7mm) long x 5/16" (7.9mm) diameter. All in-

serts have 10-32 tpi internal threads. Sling Stud Inserts - (2) inserts, (2)

steel, dome-top sling studs, matte blued. General Use Iserts - (10) 10-32

tpi threaded inserts.

#080-000-682AT Sling Stud Inserts, 2-pak, 5D6B04$6.99

#080-000-685AT Inserts, 10-pak, 5D25K61 29.99

TALLEY MAGNUM CROSSBOLT

Distributes Recoil; Adds A Custom Touch

Distributes recoil on heavy magnums. Heavy-walled tube goes inside the stock, secures between two "bolts" with specially designed heads. With sharp, squared edges for clean inletting. Finish to match stock contours. ab SPECS: Tube 1/4" (6.3mm) dia., 13/8" (3.5cm) long. Heads 7/16" (11.1mm) dia., 1/8" (3.2mm) thick. Machined steel, in-the-white. #874-005-000AT Magnum Crossbolt, 4G6A40$6.96

TREEBONE CARVING

CLASSIC BUTTPLATE

Traditional Style Adds A Touch Of Quality

Classic, pre-war American pattern derived from various Winchester and Sharps models. Slightly curved face with pointed heel tip and 18 lpi checkering. ab SPECS: Investment cast 4140 steel, in-the-white. 5" (12.7cm) long, 1.62" (4.1cm) wide. #507-000-001AT Model 70 Classic Buttplate,

7K48L79 $55.00

OHIO RIFLE COMPANY WINCHESTER

BRASS BUTTPLATE

Checkered Brass Really Dresses Up Your Rifle

Dress up that 1950's vintage Winchester lever rifle with these checkered buttplates available in gunmetal grey to match original receiver finish or natural brass for a distinctive look. Precision machined checkering provides a positive grip on your shoulder without slipping. Constructed from soft brass for easy shaping and fitting to the buttstock, plus easily bends to match curved buttstocks. Will not rust, break or shrink over time. ab SPECS: Brass, gunmetal gray or natural finish. Adapts to fit other guns. 51/4" (13.3cm) long, 13/4" (4.4cm) wide, 1/8" (3.1mm) thick. #100-003-530AT Antique Brass, 7B23L65 $26.99 #100-003-532AT Gunmetal Gray, 7B23P65 26.99

NEIDNER

BUTT PLATE & GRIP CAP

Checkered Steel Adds The Hallmark Of Quality

Now back in production, the classic Neidnerstyle, checkered steel butt plates and grip caps give a secure, no-slip surface, plus that touch of traditional elegance. Curved butt plate with pointed heel tip is functional and comfortable. Single-screw grip cap is smooth on the outside edge with raised, checkered oval in the center. Screws included. ab SPECS: Steel, blued, checkered. Butt Plate; 51/16" (12.8cm) x 11/2" (3.8cm). 3" (7.6cm) c-to-c hole spacing. Grip Cap; 113/16" (4.6cm) x 15/16" (3.3cm). #078-010-100AT Checkered Butt Plate, 8D32M15 $36.00 #078-010-110AT Checkered Grip Cap, 8D23Q74 25.00

MCFARLAND

TRADITIONAL STEEL BUTTPLATE

A Beautiful, Classic Touch For Custom Rifles

Graceful contour with a slight curve adds an unmistakable touch of class to any rifle. Perfect for engraving, checkering or just leave plain. Blues or case hardens beautifully. All edges have slight draft for precise fitting. Skeleton models have open centers and rounded attaching point contours that outline the stock to show beauty of the wood. Solid models provides wonderful area for checkering and engraving. English Style has traditional, pointed heel tip. ab SPECS: Mild steel, in-the-white. 5" (12.7cm) long, 15/8" (4.1cm) wide, .100" (2.5cm) thick. Supplied with flat top, 8-24 screws. #597-000-001AT Skeleton Buttplate, 7E110F89 $125.00 #597-000-002AT Solid Buttplate, 7E77H62 87.50 #597-000-003AT English Style Skeleton Buttplate,

7E110P89 125.00 #597-000-004AT English Style Solid Buttplate,

7E77H62 87.50

100 STRAIGHTPOLYMER BUTTSTOCK SPACER

Great Looking Spacers; Easy To Fit, Grind & Finish

Jet black or bright white, buttstock spacers made from strong, lightweight, polymer plastic for superior sanding and machining characteristics. Slotted hole design makes it easy to match up with just about any hole location. The wide range of thicknesses available let you use them alone or in combination to adjust rifle or shotgun stocks for length of pull, or to add a decorative and finishing touch to the stock. ab SPECS: Black or white polymer plastic. 23/16" (5.5cm) wide, 57/8" (14.9cm) long. 23/4" (6.9cm) minimum c-to-c hole spacing with 1/2" adjustment. 1/8" (3.17mm) 1/4" (6.35mm) and 1/2" (12.7mm) thick. #365-100-125AT 1/8" Black Polymer Spacer, 5F7F67 $9.99 #365-100-250AT 1/4" Black Polymer Spacer, 5F8Q04 9.99 #365-100-500AT 1/2" Black Polymer Spacer, 5F11M50 12.99 #365-101-125AT 1/8" White Polymer Spacer, 5F7Q41 9.99 #365-101-250AT 1/4" White Polymer Spacer, 5F7K89 9.99

N.C. ORDNANCE

REPRODUCTION BUTTPLATES

Reproductions Of The Factory Originals

High-quality, detailed reproduction buttplates look and feel like the originals and make restoring an old rifle or shotgun easy work. Built using original factory patterns, so you know the screw holes, checkering, company brand logos and borders are a perfect match. Outside edges grind easily for a perfect fit. Molded from a special, high-strength polyurethane that's resistant to most solvents. ab SPECS: Polyurethane, black.

STOCK #

STYLE

DIMENSIONS

RIFLE BUTTPLATES

#100-003-886AT Rem-UMC M10

(5" x 1.7")

#100-003-885AT Rem-UMC M12/141

(4.3" x 1.2")

#100-003-887AT Rem. M512/550

(4.7" x 1.5")

#100-003-888AT Savage M99 Trademark

(4.6" x 1.4")

#100-003-883AT Stevens Favorite

(4.2" x 1.3")

#100-003-878AT Win. 1894 Pre-64

(4.8" x 1.6")

#100-003-876AT Win. 1906

(4.1" x 1.1")

#100-003-877AT Win. M61/67/69/72/1910

(4.75" x 1.5")

#100-003-879AT Win. M70/88/100

(5.1" x 1.6")

SHOTGUN BUTTPLATES

#100-003-889AT Browning Auto-5

(5.2" x 1.75")

#100-003-890AT Browning Superposed 12 Ga.

(5.3" x 1.75")

#100-003-891AT Browning Superposed 20 Ga.

(5.4" x 1.6")

#100-003-892AT Ithaca M37

(4.9" x 1.5")

#100-003-880AT L.C. Smith 12 Ga.

(5" x 1.7")

#100-003-881AT L.C. Smith 16-20 Ga.

(4.8" x 1.5")

#100-003-882AT L.C. Smith Oversized

(5.5" x 1.9")

#100-003-884AT Rem. M11

(5" x 1.7")

#100-003-873AT Win. 1897

(5.2" x 1.7")

#100-003-874AT Win. M12/12 Ga.

(5.1" x 1.5")

#100-003-875AT Win. M12/16-20 Ga.

(4.9" x 1.6")

-- Advise # -- Rifle Buttplate, 8B12H76$ 14.95

-- Advise # -- Shotgun Buttplate, 8B12D76 14.95

UNIVERSAL BUTTPLATE

Replaces Worn, Chipped, Broken Factory Buttplates; Preserves Original Appearance

Speed up the restoration of that classic shotgun or rifle by replacing a worn, chipped, or cracked buttplate with an affordable, grind-to-fit replacement of moldable polyurethane resin. Durable resin looks and feels like the hard rubber, Bakelite, or black plastic used for the original buttplates on many of these guns, and will not shrink, swell, or crack over time. Proprietary molding process uses the highest-quality molds engineered to prevent unsightly "flash" and air bubbles on the finished product. Grinds easily without flaking or fracturing. Includes fine-line, horizontal serrations often found on period buttplates, but without the tricky borders that make grinding the sides difficult. Heat briefly in boiling water or microwave to soften the resin so it can be molded to the contour of your stock; the shape sets up well once cooled and is extremely durable. Drilled and counterbored to accept two #12 buttplate screws, available separately. ab SPECS: Molded polyurethane resin, black. Fitting required. Small - 43/4" (12.1cm) long, 11/2" (3.8cm) wide. 215/16" (7.5cm) hole spacing. Medium - 5" (12.7cm) long, 15/8" (4.1cm) wide. 215/16" hole spacing. Large - 17/8" (4.8cm) wide, 57/16" (13.8cm). 3" (7.6cm) hole spacing.

#080-003-975AT Universal Buttplate, Small, 2D12N76$14.95

#080-003-976AT Universal Buttplate, Med., 2D12I76 14.95

#080-003-977AT Universal Buttplate, Large, 2D12A76 14.95

#080-000-260AT #12 Buttplate Screws, per doz., 8K7H57 10.99

stock hardware

buttplates & grip caps

PAGE402

SATISFACTION GUARANTEED

SINCE 1939

Office/Tech: 641-623-5401

STOCK WORK

KICK-EEZ

BUTTSTOCK PITCH SPACER

Adjust Stock Fit Without Cutting Stock

Tapered spacers provide positive or negative pitch angle. Easily finished polymer material blends well with stocks and recoil pads. Pre-drilled, oblong slot adapts to most hole spacings. ab SPECS: Black polymer. 2.2" (5.6cm) wide. 5.8" (14.7cm) long. Tapers 1/4" (6.3mm) to 1/16" (1.59mm) and 1/2" (12.7mm) to 1/16" (1.59mm). #440-105-003AT 1/4" Buttstock Pitch Spacer, 4D7E18$8.39 #440-105-002AT 1/2" Buttstock Pitch Spacer, 4D10F48 12.99

100 STRAIGHT

PITCH BUTTSTOCK SPACER

Adjust Pull & Pitch Without Cutting The Stock

Tapered design allows for negative or positive adjustments in stock pitch without altering the stock; adjusts length of pull. Sands and finishes beautifully. Slotted holes for universal fit. ab SPECS: Black polymer plastic. 23/16" (5.5cm) wide. 57/8" (15cm) long, 23/4" (6.9cm) minimum c-to-c hole spacing. Tapers - 1/4" (6.3mm) to 1/16" (1.59mm) positive and negative, 1/2" (12.5mm) to 1/8" (1.5mm) positive and negative. Positive is thicker at top or heel and will increase pitch. Negative is thicker at toe and will decrease pitch. Kit contains one each of all four tapers. #365-112-000AT Pitch Buttstock Spacer Kit, 5F39G74 $43.99

STK# POS. #365-114-125AT #365-112-150AT

STK# NEG. #365-114-025AT #365-112-050AT

TAPER 1/4" - 1/16" 1/2" - 1/8"

PRICE 5F8I64 $ 9.99 5F13C13 $13.99

KICK-EEZ BUTTSTOCK SPACER

Easy Fit & Finish With Traditional Appearance

Fashioned from durable black polymer, these spacers sand and polish to a high quality finish. Slotted mounting holes make it easy to match most screw locations for ease of fitting. Three spacer sizes allow custom tailoring for length of pull. Adds a nice final touch to recoil pad installations. ab SPECS: Black polymer plastic. 2.25" (5.7cm) wide, 5.8" (14.8cm) long. Hole spacing: 2.6" (6.7cm) min., 3.6" (9.3cm) max. 1/8" (3.17mm), 1/4" (6.35mm) and 1/2" (12.7mm) thick. #440-701-180AT 1/8" Stock Spacer, 4D5A00 $5.59 #440-701-140AT 1/4" Stock Spacer, 4D5A10 5.59 #440-701-120AT 1/2" Stock Spacer, 4D8K53 9.99

N.E.C.G.

HARD RUBBER BUTTSTOCK SPACER

Traditional, Jet Black; Easy-To-Grind

Traditional, black, hard rubber buttstock spacers add length to any rifle or shotgun stock. Grinds beautifully and takes a nice polish without a lot of hard work. SPECS: Hard rubber, black. 53/4" (14.6cm) high, 2" (5cm) wide. Available in 6mm (1/4"), 8mm (5/16"), 12mm (1/2") and 24mm (1") thick. #661-100-006AT 1/4" Hard Rubber Spacer, 1F8I50 $8.50 #661-100-008AT 5/16" Hard Rubber Spacer, 1F10P29 10.50 #661-100-012AT 1/2" Hard Rubber Spacer, 1F12F50 12.99 #661-100-024AT 1" Hard Rubber Spacer, 1F17H52 18.75

PACHMAYRSPACER

When "Just A Touch More" Is Needed

BLACK - Hard black rubber. NO white stripe.ab SPECS: 53/4" (19.6cm) x 2" (5cm) x 3/16" (4.76mm). #692-920-002AT BSD-20 Black Spacer, 5K6F83$8.99

WHITE - Pliable, off-white/light tan rubber. Sides turn white when you grind them.b a SPECS: Approx. 53/4" (19.6cm) x 2" (50cm) x 1/16" (1.59mm). #692-920-001AT WPS-20 White Spacer, 5K6G62 $8.50

DAKOTA CUSTOM GRIP CAP

A Stockmaker's & Engraver's Dream

Three custom grip

caps; Traditional Style "A";

"A"

"B"

"C"

Scalloped Point "B"; and

Solid "C"; all with an ele-

gant, domed profile and beautiful, oval shape. Skeleton caps made

with a 2? draft on the inside edges for faster, cleaner inletting. The

solid cap is left full thickness so it can be deeply engraved in high

relief or thinned, lightened or shaped to fit your needs. All are made

of soft, mild steel for easy shaping, engraving. ab

SPECS: 113/16" (4.6cm) x 19/32" (3.2cm). W/high topped 8-24 screws.

#359-102-001AT Dakota "A" Skeleton Grip Cap, 9E38K85 $44.99

#359-103-002AT Dakota "B" Skeleton Grip Cap, 9E38D85 44.99

#359-104-000AT Dakota "C" Solid Grip Cap, 9E38F85 44.99

MISCELLANEOUS GRIP CAPS

JERRY FISHER - Finish-ground top and gracefully rounded contours. Screw fits precisely into cap, and bottoms on shoulder. Takes engraving well.b a SPECS: Steel, in-the-white, satin finish. Small - 1.7" (4.3cm) L x 1.23" (3.1cm) W. Medium - 1.75" (4.4cm) L x 1.27" (3.2cm) W. Large - 1.8" (4.5cm) L x 1.31" (3.3cm) W.

#310-301-001AT Small Fisher Grip Cap, 1C30I27$32.99

#310-301-002AT Medium Fisher Grip Cap, 1C30J27 32.99

#310-301-003AT Large Fisher Grip Cap, 1C30Q27 32.99

JERRY FISHER 2-SCREW - Two-screw design leaves the center area open for embellishments that won't work with single-screw caps. Counterbored holes ensure positive screw seating.b a SPECS: Steel, machined from bar stock. 1/4" (6.3cm) thick. 15/16" (3.3cm) wide. 125/32" (4.5cm) long. In-the-white.

#310-300-002AT 2-Screw Grip Cap, 1C30A27$32.99

DRESSEL ENGLISH-STYLE - Machined from solid stock in sizes proportioned in length, width and height to look right and compliment any size rifle or shotgun. Includes screw with oversized, tapered head.ab SPECS: Machined steel, in-the-white, satin finish. Available in Large; 1.85" (4.6cm) X 1.43" (3.6cm), Standard; 1.78" (4.5cm) X 1.36" (3.4cm), Small; 1.71" (4.3cm) X 1.29" (3.2cm), Petite; 1.65" (4.1cm) X 1.22" (3.1cm).

#258-100-007AT Large Grip Cap, 8E30D61 $34.99

#258-100-005AT Standard Grip Cap, 8E30G61 34.99

#258-100-003AT Small Grip Cap, 8E30P61 34.99

#258-100-001AT Petite Grip Cap, 8E30K61 34.99

LENARD BROWNELL

STEEL GRIP CAP

Designed By The Old Master Himself

Lenard Brownell designed this continental style steel grip cap to satisfy his own need for a quality grip cap that would look like it "belonged" on his superb custom rifles. Now available to the trade, this beautiful cap is 8620 steel, which blues, engraves and color casehardens very well. It is investment cast rather than stamped to give a better distribution of material and make a sturdy cap with even, well defined contours and perfect steps. The kind of grip cap you can install with pride. Classic styling will compliment any rifle whether it be a fancy, engraved work of art, or a first rate hunting rifle. ab SPECS: 15/16" (3.3cm) x 113/16" (4.6cm). 1 oz. (28 g) wt. Unpolished, in-thewhite, with full-length-threaded screw.

#095-003-001AT Unpolished L. Brownell Grip Cap, each, 5K16D29 $16.99

#095-003-002AT Extra Screw For Grip Cap, 5K5N99 5.99

N.C. ORDNANCE GRIP CAPS

Reproduction & Universal Models For Any Project

Precision molded from high-strength

polyurethane to maintain crisp detail for a nice

finishing touch on custom guns or factory fire-

arms that need authentic looking restoration.

Outside edges grind easily to provide a precise

fit. Resistant to most solvents. Remington and

Rem Shotgun

Winchester models use the original factory patterns so they look and feel like the vintage

factory part. Winchester models also include molded-in mounting

lugs on the back side for a solid fit. Starburst European, Coat of

Arms, and Utility caps are universal designs that can be adapted to

any stock project. ab

SPECS: Polyurethane , black. Rem Shotgun - 1.7" (4.3cm) long x 1.4"

(3.5cm) wide. Win Shotgun/M70 Rifle - 1.7" long x 1.3" (3.3cm) wide. Win

Small Rifle - 1.5" (3.8cm) long x 1.2" (3.1cm) wide. Starburst European -

1.6" (4.1cm) long x 1.1" (2.9cm) wide. Coat Of Arms - 1.7" long x 1.2" wide.

Utility ? 17/8" long x 13/16" wide.

#100-003-868AT Rem Shotgun Cap, 8B8J54$9.99

#100-003-869AT Win Shotgun/M70 Rifle Cap, 8B8L54 9.99

#100-003-870AT Win Small Rifle Cap, 8B8M32 9.95

#100-003-871AT Starburst European Cap, 8B8B54 9.99

#100-003-872AT Coat Of Arms Cap, 8B8Q32 9.95

#100-009-401AT Utility Cap, 8B8A54 9.99

SUNNY HILL

SKELETON GRIP CAP

Provides A Hand Crafted, Custom Look To Any Rifle

Traditional style, skeleton grip cap creates the perfect contrast between wood and metal for a professional, exhibition grade appearance. Outer edge is machined to form a stepped contour that provides a shadow-line appearance. Inner edge contains a slight convex curve for faster, cleaner inletting. Includes high-top screws that can be crowned or fitted flush with the cap surface. ab SPECS: Chrwome moly, in-the-white. 1.8" (4.6cm) long x 1.3" (3.3cm) wide. 5/32" (4.1mm) thick. #848-000-006AT Skeleton Grip Cap, 8D38M02 $42.00

FOREND TIP/GRIP CAP SETS

Gorgeous Walnut And Redwood Guaranteed To Please

REDWOOD BURL: - Swirling, deep red, birdseye burl. Set includes 2 pieces.b a SPECS: Approximate; sizes vary considerably: Large - 27/8" (7.3cm) x 17/8" (4.8cm) x 115/16" (23.8mm); Small - 21/8" (5.4cm) x 111/16" (17.5mm) x 7/16" (11.1mm). #461-100-001AT Redwood Tip/Grip Cap Set, 1F18L76 $20.99

CALIFORNIA ENGLISH WALNUT - Beautiful, highly colored and figured, circassiantype, fancy grade with contrasting figures and marbling. Set includes 2 pieces.b a SPECS: Approximate; sizes vary considerably: Large - 21/8" (5.4cm) x 21/4" (5.7cm) x 31/2" (9cm). Small - 11/16" (17.5cm) x 21/2" (6.3cm) x 33/8" (8.6cm). #461-100-005AT English Walnut Tip/Cap Set,

1F18P76 $20.99

JOHNSON WOOD PRODUCTS

AMERICAN WALNUT TIP/GRIP CAP SET

Beautiful Wood For Custom Rifle Builds

Beautifully-figured American walnut blocks let gunsmiths make attractive stock forend tips and grip caps for custom rifles. Large block for forend tip, small block for grip cap. Available in Similar Figure, with very similar patterns and grains and Matched Figure, with matching patterns and grains. Each set includes two wood blocks. ab SPECS: Actual sizes vary considerably. Large - 27/8" (7.3cm) long, 115/16" (23.8cm) wide 17/8" high (4.8cm). Small - 21/8" (5.4cm) long, 111/16" (17.5) wide, 7/16" high (11.1cm). #461-100-003AT American Walnut Tip/Grip Cap Set, Similar Figure, 1F14D15 $15.99 #461-100-004AT American Walnut Tip/Grip Cap Set, Matched Figure, 1F18H76 20.99

GALAZAN

STOCK OVAL & SHIELD

Ready For Inletting & Engraving

Give your customers that touch of personal distinction. All-metal shield and ovals are pre-contoured and engrave easily. Includes rear pins for a secure glue or epoxy joint. ab SPECS: Nickel silver (NS) or 10K solid gold (SG).

STOCK # #344-130-001AT #344-130-002AT #344-130-101AT

SHAPE Oval Shield Oval

SIZE (WXH) 3/4" x 1" 9/16" x 3/4" 5/8" x 15/16"

FINISH

PRICE

NS 4D23K92 $24.99

NS 4D23B92 $24.99

SG 4D318M32 $334.99

buttplates & grip caps

Orders/Tech: 800-741-0015

order on the web



PAGE403

STOCK WORK

BILLINGSLY & BROWNELL

MANNLICHER NOSE CAP

Classic Accent For Mannlicher Stocks

The crowning touch on any Mannlicher stock. Designed by Lenard Brownell. Made from top quality steel. U npolished. Attaching screw and nut furnished. ab SPECS: Barrel opening is .640" (16.2mm) dia. (approximate). Overall, .915" (23.2mm) high; .850" (21.6mm) long, 3/4 oz. (21 g) wt. #095-004-001AT Mannlicher Nose Cap, 5K20M86 $22.99

PACHMAYR RECOIL PADS

Protect Shoulders From The Heaviest Recoil; Easily Ground For Proper Fit

Adding a good-quality aftermarket rubber recoil pad is an excellent way to get a significant reduction in felt recoil - and a nonslip surface that keeps the gun butt in place on your shoulder. Long the industry standard, Pachmayr pads use specially designed internal ribbing to gradually absorb the kick over the course of the entire recoil impulse and protect your shoulder. They come with a variety of patterns on the faces, chosen to match the application and make certain your gun will mount easily and hold tightly. Screw hole spacing and the taper of the pad's toe vary with pad size to allow proper fitting to a wide variety of gun stocks. Highgrade rubber grinds/sands to shape easily for a professional fit. All models available in standard black, while others also come with optional brown, which sometimes just looks better on certain guns.

DECELERATOR

LIGHTWEIGHT

recoil pads

GALAZAN

FACTORY LOGO RECOIL PAD

The Final Detail For An Accurate Restoration

Makes your restorations as accurate and valuable as possible. These red-brown rubber pads are exact reproductions of those used in the early 1900's. The Hawkins was a commonly-used, turn of the century, aftermarket pad. This faithful re-creation has the original Hawkins logo in the center and is available with the original diamond/heart pattern vents or horizontal square vents. The Winchester Vented is a copy of the original pad on early 1920's Winchesters that includes the Winchester logo, with the legend "MADE IN U.S.A." above the logo and "TRADE MARK PAT. JUNE 6, 1922" correctly placed below it. Winchester Solid is a solid red pad modeled after that of many original pre-'64 Winchesters including the Model 70, Model 12, Model 21, plus all lever action and pump models. Raised lettering Winchester logo. Early Noshoc pad provides an opportunity to put the correct era pad on many high-grade American guns. Used by Parker, Fox, L.C. Smith, Remington, Winchester, and Lefever. Raised lettering reads "NOSHOC" with the legend "PATENTED JUNE 6, 1922" above the logo and "MADE IN U.S.A" below it. The Universal pad comes in red and works well on a variety of custom stocks. Screw holes are 31/4" apart; midway between these holes is an internal cavity 3/4" wide and 21/8" long. SPECS: Rubber. Red pad with black base. Hawkins - 5.9375" long x 1.9375" wide, 1" deep, 3.25" center-to-center hole spacing. Noshoc - 5.344" long x 1.75" wide, .9" deep, 3.020" c-to-c hole spacing. Winchester Vented - 4.75" long x 1.6875", 1" deep, 3.0625" c-to-c hole spacing. Winchester Solid - 5.5" long x 1.875" wide, .875" deep, 3.125" c-to-c hole spacing. Universal - 5.5" long x 1.9" wide, 1/2" (1.3cm) or 3/4" (1.9cm) deep, 3.25" (8.2cm) c-to-c hole spacing. #344-000-010AT Hawkins Recoil Pad, Diamond Vent,

4D24P62 $29.99

#344-000-012AT Noshoc Recoil Pad, 4D24I62 29.99

#344-000-014AT Winchester Recoil Pad, Vented, 4D33C14 39.99

#978-100-001AT Winchester Recoil Pad, Solid, 4D40H06 40.99

#344-000-013AT Universal Recoil Pad, 1/2" Red, 4D15L99 15.99

#344-000-016AT Universal Recoil Pad, 3/4" Red, 4D17N52 19.99

KICK-EEZ JR. MODEL RECOIL PAD

Smaller Size Plus Greater Comfort

Sorbothane? rubber gives smaller shooters freedom from sore shoulders and pain. Junior size compliments and installs more easily on youth or smaller rifles and shotguns, and stocks that have been shortened. Black base with leather grain textured face. ab SPECS: Black. 1.75" (4.4cm) x 4.75" (12cm) x 1" (2.54cm), 2.75" (7cm) center-to-center hole spacing. #440-300-101AT Jr. Recoil Pad, 4D30H19 $34.99

SC100

SPORTING CLAYS BLACK BASE

A 752-style pad with Decelerator material to soak up recoil, and a hard insert at the heel to slide smoothly over clothing. ab SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Med., 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .8" = 20.3mm, 1" = 2.54cm.

STOCK # #690-011-157AT #690-011-158AT #690-011-159AT #690-011-168AT #690-012-157AT #690-012-158AT #690-012-159AT #690-012-167AT #690-012-168AT

THICK .8" .8" .8" .8" 1" 1" 1" 1" 1"

FACE Leather Leather Leather Leather Leather Leather Leather Leather Leather

COLOR Black Black Black Brown Black Black Black Brown Brown

SIZE Small Medium Large Medium Small Medium Large Small Medium

-- Advise # -- SC100 Black Base Pad, 5K39I10 $ 43.99

D200B/D500B

ULTRA-LIGHT FIELD PAD BLACK BASE

Ultra low-profile pad designed for rimfire and other low-recoil guns ensures fast, yet secure shouldering in the field. Gently concave face helps prevent shouldered rifle from slipping. Made of black Decelerator rubber with solid black base, no white line. Available with Stippled or Basketweave pattern molded into face. ab SPECS: Two (2) mounting screws included. D200B Stippled ? 1.95" (4.9cm) x 5.40" (13.7cm) x .50" (1.3cm). D500B Basketweave ? 1.80" (4.6cm) x 5.50" (14cm) x .50" (1.3cm).

STOCK # #692-000-020AT #692-000-021AT

THICK

FACE

.5"

Stippled

.5"

Basketweave

COLOR MODEL Black D200B Black D500B

-- Advise # -- D200B/D500B Decelerator Ultra-Light Pad, 5K13H39 $ 14.99

D550

BLACK BASE TRAP

Recoil-absorbing, smooth-sided trap pad with solid black base, no white line. ab SPECS: Medium, 1.95" (4.9cm) x 5.35" (13.6cm); Large, 2.05" (5.2cm) x 5.70" (14.5cm). 1.1" = 2.8cm.

STOCK # #690-521-158AT #690-521-159AT

THICK FACE 1.1" Pigeon 1.1" Pigeon

COLOR SIZE Black Med Black Lrg

-- Advise # -- D550 Black Base Trap Pad, 5K39C86 $ 43.99

D750B

BLACK BASE

Famous Decelerator rubber plus smooth sides and tapered, internal ribbing soak up rifle recoil. Classic design with a solid black base (no white line). ab SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Med., 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .6" = 15.2mm, .8" = 20.3mm, 1" = 2.54cm.

STOCK # #690-551-158AT #690-552-158AT #690-553-157AT #690-553-158AT #690-553-159AT

THICK .6" .8" 1" 1" 1"

FACE Basketweave Basketweave Basketweave Basketweave Basketweave

COLOR Black Black Black Black Black

SIZE Medium Medium Small Medium Large

-- Advise # -- D750B Decelerator Pad, 5K32D24 $ 34.99

D752

OLD ENGLISH BLACK BASE

Classic, smooth-sided pad made from famous Decelerator rubber. Features tapered, internal ribbing. Solid base, no white line. ab SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Med., 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .6" = 15.2mm, .8" = 20.3mm, 1" = 2.54cm.

STOCK # #690-541-157AT #690-541-158AT #690-541-159AT #690-541-168AT #690-542-157AT #690-542-158AT #690-542-159AT #690-542-168AT #690-543-157AT #690-543-158AT #690-543-159AT #690-543-167AT #690-543-168AT #690-543-169AT #690-000-015AT

THICK .6" .6" .6" .6" .8" .8" .8" .8" 1" 1" 1" 1" 1" 1" 1"

FACE Leather Leather Leather Leather Leather Leather Leather Leather Leather Leather Leather Leather Leather Leather Leather

COLOR Black Black Black Brown Black Black Black Brown Black Black Black Brown Brown Brown Red

SIZE Small Medium Large Medium Small Medium Large Medium Small Medium Large Small Medium Large Medium

-- Advise # -- D752 Black Base Old English Pad, 5K32N24$ 34.99

Pachmayr Recoil Pads Continue

On The Next Page

F250 WHITE LINE FIELD

Field shape in a lightweight design. Finely checkered surfaces for fast gun handling without slipping away from shoulder. ab SPECS: Small, 1.75" (4.5cm) x 5.10" (13cm). Medium, 1.80" (4.6cm) x 5.35" (13.6cm).

STOCK # THICK FACE COLOR #690-051-157AT .85" Lined Checkrd Black #690-051-158AT .85" Lined Checkrd Black #690-051-168AT .85" Lined Checkrd Brown

SIZE Small Medium Medium

-- Advise # -- F250 White Line Field Pad, 5K22F06 $ 24.99

752B

DECELERATOR YOUTH

Smaller Size Looks Correct On Petite Rifles

Decelerator? pad that's smaller in all dimensions to look and fit right on youth or smaller rifles and shotguns. Tighter hole spacing makes installation easier with less chance of stock damage. ab SPECS: 1.68" (4.3cm) wide, 5.30" (13.5cm) high, 1" (2.5cm) thick, 2.50" (6.35cm) c-to-c hole spacing. #690-110-752AT 752B Decelerator Youth Pad,

5K31E60 $34.99

TRAPT550WHITE LINE

Trap shooting requires a different shape in a recoil pad for accurate, repeated, shoulder positioning and maximum recoil reduction. First choice of Trap Champions everywhere. ab SPECS: Medium, 1.95" (4.9cm) x 5.35" (13.6cm) x 1.1" thick. Black, with leather face.

#690-211-258AT T550 Trap Pad, 5K27M74 $30.99

PRE-FIT

Decelerator? Pads, Pre-Contoured For Popular Stocks

Unscrew a factory buttplate or pad and screw on Pachmayr's premier model - with no gunsmithing! The hole spacing usually matches and, where needed, rifle models include an adapter/spacer to make mounting easier. The exterior shape is ground and finished to within .050" of the stock. All have solid sides and a black base. Rifle pads feature a basketweave face so the gun stays on your shoulder. Shotgun pads are Old Englishstyle with a leather grained face for quick shouldering. ab SPECS: Black Decelerator rubber, black base. Designed to fit current production models that were fitted at the factory with an O.E.M. recoil pad. 1" (2.5cm) thick.

STK#

Fits

#690-000-017AT Marlin 336 wood stock

#690-000-004AT Marlin 1895 Guide Gun, 444P, 1894 Ported

#690-601-712AT Rem. 700 ADL/BDL wood stock, curved

-- Advise # -- Pre-Fit Recoil Pad, 5K33G53 $ 36.99

buttplates & grip caps

PAGE404

SATISFACTION GUARANTEED

SINCE 1939

Office/Tech: 641-623-5401

DELUXE

PACHMAYR RECOIL PADS CONTINUED

OLD ENGLISH

MAGNUM

KICK-EEZ

RECOIL PAD

Soft, Genuine Sorbothane?

STOCK WORK

recoil pads

F325

DELUXE WHITE LINE FIELD

A favorite design for fast action shooting. Shape, construction and hardness make this pad ideal for shotguns or large caliber rifles. ab SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm). Medium, 1.90" (4.8cm) x 5.40" (13.7cm). 1" = 2.54cm, 1.1" = 2.79cm.

STOCK # #690-111-157AT #690-112-158AT #690-111-167AT #690-112-168AT

THICK 1" 1.1" 1" 1.1"

FACE Stipple Stipple Stipple Stipple

COLOR Black Black Brown Brown

SIZE Small Medium Small Medium

-- Advise # -- F325 White Line Fld Pad, 5K24E42 $ 26.99

F325B

DELUXE BLACK BASE FIELD

A favorite design for fast shooting. Shape, construction and hardness make it ideal for shotguns or large caliber rifles. ab SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm). Medium, 1.90" (4.8cm) x 5.40" (13.7cm). Large, 2.05" (5.2cm) x 5.70" (14.5cm). 1" = 2.54cm, 1.1" (2.79cm), 1.15" (2.92cm).

STOCK #

THICK

FACE

COLOR

SIZE

#690-121-157AT

1"

Stipple

Black

Small

#690-121-158AT 1.1"

Stipple

Black

Medium

#690-121-159AT 1.15"

Stipple

Black

Large

#690-121-167AT

1"

Stipple

Brown Small

#690-121-168AT 1.1"

Stipple

Brown Medium

#690-121-169AT 1.15"

Stipple

Brown Large

-- Advise # -- F325B Blk Face Field Pad, 5K24A42 $ 26.99

S325

DELUXE WHITE LINE SKEET

This design is based on exhaustive testing by top skeet shooters and professionals. A medium-sized page with a superior shape that has the right "feel" so necessary for both shooter comfort and fast gun handling. ab SPECS: Medium, 1.90" (4.8cm) x 5.40" (13.7cm) x 1" thick. Black, with ribbed face.

#690-132-158AT S325 White Line Skeet Pad, 5K24F42 $26.99

Go to the learn tab at to view videos and

read articles on your gun.

752B

BLACK BASE

Extremely elegant pads for fine guns. Same internal configuration as Presentation pad. Smooth sides, rounded edges. Solid black base, no white line. ab SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Medium, 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .6" = 15.2mm, .8" = 20.3mm, 1" = 2.54cm.

STOCK # #690-311-157AT #690-311-158AT #690-312-158AT #690-312-168AT #690-313-157AT #690-313-158AT #690-313-159AT #690-313-168AT

THICK .6" .6" .8" .8" 1" 1" 1" 1"

FACE Leather Leather Leather Leather Leather Leather Leather Leather

COLOR Black Black Black Brown Black Black Black Brown

SIZE Small Medium Medium Medium Small Medium Large Medium

-- Advise # -- 752B Black Base Pad, 5K24F42$ 26.99

F990

WHITE LINE FIELD

Extra thick, extra soft, "Triple Magnum" design. Recoil is distributed over entire pad. Tapered ribbing, layered core, with non-bending inserts that prevent unwanted downward movement. Field-style for easier shouldering. ab SPECS: Small, 1.80" (4.6cm) x 5.15" (13.1cm); Med, 1.90" (4.8cm) x 5.40" 13.7cm); Large, 2.05" (5.2cm) x 5.70" (14.5cm). 1.50" = 3.8cm.

STOCK # #690-371-257AT #690-371-258AT

THICK 1.50" 1.50"

FACE Leather Leather

COLOR Black Black

SIZE Small Med

-- Advise # -- F990 White Line Field, 5K63F11$ 69.99

WANT MORE NEW STUFF? Visit our website for daily updates!

RIFLE

RP200 BLACK BASE

500B BLACK BASE

Stippled face grips clothing, prevents rifle movement during recoil. Solid color base preferred by many. ab SPECS: Med, 1.85" (4.7cm) x 5.40" (13.7cm). .5" = 12.7mm.

STOCK # #690-032-158AT #690-032-168AT

THICK .5" .5"

FACE Stipple Stipple

COLOR SIZE Black Med Brown Med

-- Advise # -- RP200 Black Base Pad, 5K19P71 $ 21.99

RP250 BLACK BASE

Flat face with "downward slanting" horizontal grooves comes to shoulder easily without drag. ab SPECS: Medium, 1.90" (4.8cm) x 5.55" (14.1cm). .5" = 12.7mm.

STOCK # THICK FACE COLOR SIZE #690-091-158AT .5" Grooved Black Medium

-- Advise # -- RP250 Black Base Pad, 5K19D71 $ 21.99

Basketweave rifle pad for the finest custom jobs. Solid color base preferred by many. ab SPECS: Small, 1.68" (4.3cm) x 5.30" (13.5cm); Medium, 1.80" (4.6cm) x 5.50" (14cm); Large, 1.92" (4.9cm) x 5.75" (14.6cm). .4" = 10.2mm.

STOCK # THICK FACE COLOR SIZE #690-191-157AT .4" Basketweave Black Small #690-191-158AT .4" Basketweave Black Medium #690-191-159AT .4" Basketweave Black Large #690-191-168AT .4" Basketweave Brown Medium -- Advise # -- 500B Black Base Pad, 5K19D71 $ 21.99

RP200 WHITE LINE

Stippled face grips clothing, prevents rifle movement during recoil. Contrasting white line. ab SPECS: Medium, 1.85" (4.7cm) x 5.40" (13.7cm). x .5" (12.7mm) thick. Black, stippled face. #690-031-168AT RP200 White Line Pad,

5K19K71$21.99

PACHMAYR XLT MAGNUM ULTRA-SOFT TRAP PAD

Super Soft Pads For Longer Shooting Sessions

50% softer than the DeceleratorTM pad with smooth grinding and fitting characteristics that make this pad easy to install while giving your favorite trap gun classy good looks and providing you with superior comfort. Leather-style face provides a grippy surface to keep the gun firmly seated on your shoulder. Won't go "flat" after years of shooting and vertical storage. Available in Medium and Large. ab SPECS: Black, rubber. Med., 1.95" (4.9cm) x 5.35 (13.6cm). 1.1" (2.8cm) thick. Large, 2.05" (5.2cm) x 5.70" (14.5cm). 1.2" (3.1cm) thick.

#690-000-020AT XLT Trap Pad, Medium, 5K40H61 $44.99 #690-000-021AT XLT Trap Pad, Large, 5K37G99 37.99

300 Series

400 Series

200 Series Dual Action

300 Series Dual Action

500 Series

These pads don't just slow recoil down, they actually cut the kick dramatically by absorbing it! Made from soft, springy, Sorbothane, they end next-day-hurt, tame large caliber flinch and allow recoilsensitive shooters to shoot in comfort. Won't ever bottom out. Grind and shape like regular pads, just don't allow heat to build up. 200 Series Dual Action Sporting Clays pad has two layers of Sorbothane for extra protection. The first layer reacts quickly to absorb initial recoil, while the second layer dissipates the remaining energy to maximize absorption. Heel is canted approximately 45? for easy shouldering from the "low gun" position. 300 Series All Purpose has a slightly concave face designed for all shooting applications. 300 Series Dual Action All Purpose pad combines the two-layer absorption properties of the 200 Series Dual Action pads with a flat back and downward-canted ends for easy shouldering in a wide variety shooting applications. 400 Series Trap has a more pronounced concave face than 300 Series for fixed-position trapshooting. 500 Series Magnum is designed for heavy recoiling guns and has a flat face and downward canted ends for easy shouldering. All pads feature solid sides, a black base, and leather-grain textured face. ab SPECS: Sorbothane? visco-elastic polymer. Large - 2.03" (5.1cm) x 5.65" (14.3cm). Medium - 1.93" (4.9cm) x 5.33" (13.5cm). DA = Dual Action. Dimensions shown in chart are nominal and can vary due to ambient temperature and humidity conditions present at the time of manufacture.

STOCK # #440-000-050AT #440-000-051AT #440-000-052AT #440-000-053AT #440-000-025AT #440-301-106AT #440-301-108AT #440-301-110AT #440-000-054AT #440-000-055AT #440-302-106AT #440-302-108AT #440-302-110AT #440-000-056AT #440-000-057AT #440-401-106AT #440-401-108AT #440-401-110AT #440-402-106AT #440-402-108AT #440-402-110AT #440-000-044AT #440-000-045AT #440-501-112AT #440-502-112AT

MODEL DA-201-8-L-B DA-201-10-L-B DA-202-8-M-B DA-202-10-M-B 301-5-L-B 301-6-L-B 301-8-L-B 301-10-L-B DA-301-8-L-B DA-301-10-L-B 302-6-M-B 302-8-M-B 302-10-M-B DA-302-8-M-B DA-302-10-M-B 401-6-L-B 401-8-L-B 401-10-L-B 402-6-M-B 402-8-M-B 402-10-M-B 403-6-L-B 403-8-L-B 501-125-L-B 502-125-M-B

SIZE Large Large Med. Med. Large Large Large Large Large Large Med. Med. Med. Med. Med. Large Large Large Med. Med. Med. Large Large Large Med.

THICK 15/16" (2.4cm) 11/8" (2.9cm) 15/16" (2.4cm) 11/8" (2.9cm) 1/2" (1.3cm) 3/4" (1.9cm) 15/16" (2.4cm) 11/8" (2.9cm) 15/16" (2.4cm) 11/8" (2.9cm) 3/4" (1.9cm) 15/16" (2.4cm) 11/8" (2.9cm) 15/16" (2.4cm) 11/8" (2.9cm) 3/4" (1.9cm) 15/16" (2.4cm) 11/8" (2.9cm) 3/4" (1.9cm) 15/16" (2.4cm) 11/8" (2.9cm) 3/4" (1.9cm) 15/16" (2.4cm) 13/8" (3.5cm) 13/8" (3.5cm)

COLOR Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black

-- Advise # -- 200/300 Kick-Eez Recoil Pad, 4D31D26 $ 34.99

-- Advise # -- 400 Kick-Eez Recoil Pad, 4D31J00 34.99 -- Advise # -- 500 Kick-Eez Recoil Pad, 4D31M00 34.99

Orders/Tech: 800-741-0015

order on the web



PAGE405

STOCK WORK

recoil pads

KICK-EEZ PRE-FIT RECOIL PADS

Recoil-Absorbing Pads; Easy Drop-In Installation

Drop-in replacement buttpad with outstanding recoil absorption properties reduces felt recoil by, and minimizes flinch for fast, accurate follow up shots and no "day after" shoulder pain. These pads are preshaped to fit the factory stock contours and screw spacing, so there's no grinding, fitting, or drilling. Just remove the current buttpad and replace with a KickEez. Made of Sorbothane?, a unique visco-elastic polymer that disperses recoil energy outward, away from the shooter's shoulder, without distorting or bottoming out. Retains its 100% memory even after thousands of shots. ab SPECS: Sorbothane synthetic rubber, black. Approximately 13/16" (3cm) thick. Includes (2) mounting screws and installation instructions.* Buttpad height measured from heel to toe.

STOCK # #440-000-030AT

#440-000-029AT

FITS GUN/STOCK TYPE Beretta, all 53/8"* wood/synthetic; Baikal, wood; Stoeger, wood (some models) Marlin 336/444/450/512; Mossberg 500 AG Turkey/9200/9300, wood; Rem 870 Wingmaster (non-Express)/870 Police/11-87 SP (1992 only), wood; Weatherby Vanguard; Winchester 70 Carbine (.30-06)/Mod 100, wood

-- Advise # -- Pre-Fit Recoil Pad, 4D29C87 $ 34.99

KICK-EEZ ROCKER RECOIL PAD

Comes Quickly To Your Shoulder With Consistent Comfort & Fit

Shock-absorbing Sorbothane? really soaks up recoil. Features a tapered toe for a snug fit that does not dig into your shoulder. The heel features a round contour that lets you bring the gun up fast and easy, without grabbing your clothes. Provides repeatable, consistent gun mounting for greater comfort and accuracy. Attractive, leather face. ab SPECS: Includes screws. 2" (5cm) x 55/8" (14.3cm). Thick 1.2" (3cm); Thin - .940" (2.4cm) maximum thickness. #440-000-023AT Thick Rocker Recoil Pad, 4D30M19 $34.99

#440-000-024AT Thin Rocker Recoil Pad, 4D30Q19 34.99

KICK-EEZ

SPORTING CLAYS RECOIL PAD

Sorbothane? Absorbs Recoil, Plus Altered Design Is Easier To Shoulder

Functional, diagonal cut at the heel won't catch on clothing so it's easier and faster to shoulder when you're shooting your favorite sporting clays course. Made from exclusive Sorbothane material that's soft and springy to soak up recoil force and prevent sore, next-day shoulder. Can be ground and fit just like conventional rubber pads. ab SPECS: Leather face. Includes screws. Large - 2.03" (5.1cm) x 5.75" (14.6cm). All dimensions are nominal. Medium -1.93" (4.9cm) x 5.33" (13.5cm).

STOCK # #440-201-110AT #440-201-108AT #440-201-106AT #440-202-110AT #440-202-108AT #440-202-106AT

MODEL 201-10-L-B 201-8-L-B 201-6-L-B 202-10-M-B 202-8-M-B 202-6-M-B

SIZE Large Large Large Med. Med. Med.

THICK 1.1" (3cm) 1.0" (2.5cm) .8" (20.3mm) 1.1" (3cm) 1.0" (2.5cm) .8" (20.3mm)

COLOR Black Black Black Black Black Black

-- Advise # -- Kick-Eez Sprtng Clay Pad, 4D30L19 $ 34.99

HOGUE

EZGTM GRIND-TO-FIT RECOIL PADS

Neoprene Elastomer Cushions Painful Recoil Grinds Cleanly

Ultra-soft, space-age, polymerized, synthetic rubber pad cushions painful recoil and saves your shoulder. Customizable - these pads grind cleanly; oversized for the perfect fit on your rifle or shotgun. Polymer base plate flexes slightly to resist cracking and to fit less-than-perfect stocks. SPECS: Small - 5.3" (13.46cm) tall, 1.68" (4.27cm) wide, 1" (2.54cm) thick. Medium - 5.5" (14cm) tall, 1.8" (4.6 cm) wide, 1" (2.54 cm) thick. Large - 5.7" (14.79cm) tall, 2" (5.08cm) wide, 1" 2.54 cm) thick. Includes (2) screws. Gunsmith fitting required.

STK# BLACK #408-000-047AT #408-000-048AT #408-000-049AT

STK# BROWN NA

#408-000-051AT NA

Size Small Medium Large

-- Advise # -- EZG Grind Recoil Pads, 8K22L99$ 22.99

KICK-EEZ

SPECIAL PURPOSE RECOIL PAD

Soft Sorbothane? For Difficult-To-Fit Stocks

Solid pad with adjustable hole spacing for easier fitting to those "hollow" stocks on Browning Gold, Beretta 390 and Benelli shotguns. Soft, Sorbothane dramatically absorbs recoil energy. ab SPECS: Sorbothane. Black. Flat leather face. 21/4" (5.7cm) W, 6" (15cm) long, 15/16" (24mm) thick. Includes screws. #440-801-001AT Special Purpose Pad, 4D31P00 $34.99

REMINGTON 700/870

SUPERCELLTM RECOIL PAD

Get 54% Less Felt Recoil For All Day Shooting Comfort

Manufactured by Remington, the advanced Supercell pad provides an amazing 54% reduction in felt recoil over the standard factory pad. Helps prevent flinching for quick, accurate follow up shots, and ensures all-day shooting comfort. Lightweight, advanced polymer construction won't change the balance of your Model 700 ADL/BDL rifle or 870 shotgun. Easy, drop-in installation. Models to fit synthetic and wood stocked guns. ab SPECS: Advanced polymer, black. Synthetic - Fits factory synthetic stock. 15/16" (2.7cm) thick. Wood - Fits factory wood stock. 11/16" (2.7cm) thick. 700 - Fits Model 700 ADL/BDL rifles. Includes mounting screws. 870 Fits Remington 870 shotguns, 20/12 gauge. Requires original mounting screws. #768-194-840AT Rem 700 Supercell Recoil Pad,

Synthetic, 8F18E21 $19.99

#768-194-830AT Rem 700 Supercell Recoil Pad, Wood, 8F18P21 19.99

#767-000-918AT Rem 870 Supercell Recoil Pad, Synthetic, 7F25K46 26.99

#767-000-919AT Rem 870 Supercell Recoil Pad, Wood, 7F25N71 27.99

MASEN SEMI-AUTO RIFLE

RUBBER RECOIL PAD

Extra-Length Plus No-Slip Surface

Increases stock length to better fit shooters with long arms. Provides a cushioned, recoil absorbing, non-slip surface. Replaces original pad with no permanent alterations. AR-15/M16 model fits A1 and A2 trap door buttstocks; adds 3/4" length. CAR-15 model fits M4-style collapsible stock; adds 3/4". M14/M1A adds 7/8". M1 Garand model adds 7/8". Ruger? model fits 10/22? , Mini-14? with serial number beginning "580-" and higher, Mini-Thirty?, and Model 96TM; adds 11/8". ab SPECS: Polyethylene rubber, black. Serrated face. #560-153-700AT AR-15/M16 Recoil Pad, 6E12D95$13.99 #560-153-800AT CAR-15 Recoil Pad, 6E12I00 12.99 #560-153-808AT M14/M1A Recoil Pad, 6E14M45 14.99 #560-153-807AT Ruger Recoil Pad, 6E15B33 15.99

SIMS VIBRATION LABORATORY

LIMBSAVER? GRIND-TO-FIT PADS

Advanced Technology Displaces Recoil; Gives You A Custom-Fit Recoil Pad

Space-age, NAVCOMTM polymer, grind-to-fit recoil pad reduces bruising and recoil pain on your shoulder. Grinds easily using a coarse belt for a perfectfitting recoil pad. Advanced Simms technology spreads recoil throughout the entire pad for even recoil displacement. Available in Small, Medium, and Large. ab SPECS: Navcom polymer, black. 1" (2.54cm) thick. Small 413/16 " (12.2cm) long, 127/32" (4.7cm) wide; grindable to 37/8" (10cm) long, 111/32" (3.4cm) wide. Medium - 53/32" (13cm) long, 113/16" (4.6cm) wide; grindable to 41/4" (11cm) long, 15/16" (3.3cm) wide. Large - 59/16" (14cm) long, 21/16" (5.2cm) wide; grindable to 47/16" (11.3cm) long, 119/32" (4cm) wide.

#902-000-072AT Limbsaver Grind-To-Fit, Small, 7K36F19 $37.99

#902-000-073AT Limbsaver Grind-To-Fit, Medium, 7K36B19 37.99

#902-000-074AT Limbsaver Grind-To-Fit, Large, 7K36N19 37.99

SIMS VIBRATION LABORATORY

LIMBSAVER? SLIP-ON RECOIL PAD

Quick, Easy Solution To Painful Recoil

Slip-on recoil pad installs with ease to displace painful shock and recoil. Transfers easily from gun to gun and requires absolutely no fitting. Made with proprietary NAVCOMTM material for a soft feel and recoil absorbance. ab SPECS: NAVCOM synthetic material, black. Available in small, medium, and large. Small - Approximately 45/8" (11.7cm) up to 5" (13cm) high, 11/2" (3.8cm) wide. Small/ Medium - approximately 45/8" (11.7cm) up to 51/8" (13cm) high, 13/4" (4.5cm) wide. Medium - 5" (13cm) up to 51/4" (13.3cm) high, 15/8" (4.1cm) wide. Large - 51/4" up to 51/2" (14cm) high, 13/4" (4.4cm) wide. #902-000-079AT Small Slip-On Recoil Pad, 7K29C63 $34.99 #100-002-653AT Small/Medium Slip-On Recoil Pad,

7K21M65 24.99 #902-000-080AT Medium Slip-On Recoil Pad,

7K29I63 34.99 #902-000-081AT Large Slip-On Recoil Pad, 7K29G63 34.99

SIMS VIBRATION LABORATORY

LIMBSAVER? GRIND-TO-FIT SPEED

MOUNT RECOIL PAD

Cushions Felt Recoil, Reduces Muzzle Jump; No-Snag Design For Fast Shouldering

Recoil-absorbing pad of NAVCOMTM synthetic material combines the proven effectiveness of the original Limbsaver with improved shouldering speed and AntiMuzzle Jump Technology for fast, accurate follow up shots. Beveled heel eliminates the prominent edge that can catch on clothing and slow down shouldering your shotgun. Wear-resistant Easy Glide surface coating further reduces friction between pad and clothing. As the firearm discharges, the redesigned two-chamber system inside the pad engages, with the lower chamber compressing first to direct the recoil force downward. Two, internal impact pillars engage to distribute the force and further control the angle of collapse, reducing muzzle jump by as much as 50%. Grind-to-fit for custom installations. ab SPECS: NAVCOMTM synthetic material, black, with black plastic base. 5.085" x 1.815, grinds to approximately 41/4" x 15/16 . 3.125" center-to-center hole spacing.

#902-000-098AT Grind-To-Fit Speed Mount Pad, 7K32L07 $37.99

SIMS VIBRATION LABORATORY

LIMBSAVER? RECOIL PAD

Pre-Fit Pads That Take The Hurt Out Of Rifle & Shotgun Shooting

Energy absorbing, NAVCOMTM material combined with dual, airtight chambers and elastic motion to reduce recoil-induced shock up to 50% over factory pads. Gives greater protection for the shooter; allows more shooting, without soreness and discomfort at the end of a long shooting day. Plus, proprietary Anti-Muzzle Jump Technology helps distribute shock to reduce muzzle rise for faster, more accurate follow up shots. Pre-fit pads; check price line to see if pad fits wood or synthetic stock. ab SPECS: NAVCOM synthetic material. Black with black base. Ribbed face. Screw-on replacement requires no fitting for guns with factory recoil pad. Benelli fits 12 gauge, including wood and synthetic stocked M1, Sport, and Super Black Eagle, and synthetic stocked Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger fits recessed Ruger synthetic stocks, plus Sako 75 and Tikka T-3 Lite synthetic stocks. Browning Gold also fits Ruger 77 and #1. Mossberg 500/835 fits post-1999 manufactured guns.

STOCK # #902-000-021AT #902-000-075AT #902-000-076AT #902-000-064AT #902-000-022AT #902-000-060AT #902-000-062AT #902-000-063AT #902-000-097AT

#100-002-236AT

#902-000-077AT

FITS Benelli Beretta 53/8" stocks, all Beretta 5" stocks, all Brn. Gold Auto, wood Moss. 835/500, synthetic Rem. 870, wood Rem. 700 BDL, wood Rem. 700 ADL, wood Rem. 700/870/1100/12 ga. 11-87, synthetic Ruger (recessed stock)/Sako 75/Tikka T-3 Lite, synthetic Savage 110, Wood

PRICE 7K32A08 $37.99 7K32G08 $37.99 7K32E08 $37.99 7K32H08 $37.99 7K32J08 $37.99 7K32C08 $37.99 7K32M08 $37.99 7K32N08 $37.99 7K32F08 $37.99

7K32H08 $37.99

7K32B08 $37.99

Selection ? Service ? Satisfaction

PAGE406

SATISFACTION GUARANTEED

SINCE 1939

Office/Tech: 641-623-5401

STOCK WORK

recoil pads

PACHMAYR

DECELERATOR? SPEED-MOUNT SLIP-ON RECOIL PAD

Fits Many Different Guns For Inexpensive Recoil Protection

Slip-on recoil pad with rounded heel section of slick polymer helps limit friction so rifle or shotgun slides smoothly to your shoulder. Heel section is specially contoured to avoid clothing snag and allow quick shouldering. Decelerator pad face provides great recoil cushioning and stretchable side material flexes to allow easy installation, while providing plenty of grip to hold pad firmly on stock. Adds 15/16" to length of pull. SPECS: Decelerator rubber, black or brown. Small - 47/8" (12.4cm) long x 15/8" (4.1cm) wide. Medium - 5" (12.7cm) long x 13/4" (4.4cm) wide. #692-000-015AT Small Speed-Mount Slip-On Pad,

Brown, 5K23G86 $25.99 #692-000-012AT Small Speed-Mount Slip-On Pad,

Black, 5K23H62 24.99 #692-000-016AT Medium Speed-Mount Slip-On Pad,

Brown, 5K23J62 24.99

TAPCOCAR-15/M4

T6/M4 RECOIL PAD

Increase Shooting Comfort & Length-Of-Pull

No permanent alterations necessary to your M4 or Tapco T6 collapsible stock to add increased shooting comfort, lower felt recoil, plus an additional 1/2" to the length-of-pull. Rubber pad slips easily over the plastic buttplate; held in position by rubber tabs and a friction collar. Won't shoot loose, stays put until it's removed. Great accessory for competitive shooters; raised, non-slip surface helps keep your rifle or shotgun onshoulder during long shooting strings or moving courses of fire. ab SPECS: Rubber, black. Adds 1/2" (12.7mm) to length-of-pull. Fits current M4 collapsible stock designs and Tapco T6 stocks. #100-002-500AT Tapco M4/T6 Recoil Pad, 5A10B49$10.99

THE STOCK SHOP SINGLE POINT

ADJUSTABLE BUTTPLATE

Convenient, Easy To Adjust For Exact Stock Fit

Adjustable buttplate system has an eccentric cam that lets you control the position of the buttpad to produce a precise, customized stock fit. Improves shooter comfort and control for more accurate shooting and higher scores. Components come as flat, uncut aluminum plates, so you can custom-cut for an exact fit to thestock. Accepts all popular aftermarket recoil pads. Thin model has a single hex head adjustment screw for setting buttpad vertical and horizontal position,plus Thin rotation angle. Adds 1/4" to length of pull. Adjustable LOP model adds two stainless steel extension rods that provide 23/4" length of pull adjustment and plus/minus 15? of pitch. Field-tested with over 20,000 shells in trap without a glitch. ab SPECS: 6061 aluminum, natural finish. 6" (15.2cm) long, 2" (5cm) wide. 3" (7.6cm) c-to-c hole spacing. Includes installation hardware and instructions. Thin ? Adjustment range: 2" vertical, 1/4" lateral, 360? rotation. Adjustable LOP ? Rods ? stainless steel, polished finish, 3" (7.6cm) long, 3/8" (9.5mm) dia. Adjustment range: 23/4" (7cm) length of pull, 2" vertical, 3/8" lateral, 360? rotation. #070-202-400AT Single Point Buttplate, Thin,

7K33N26 $37.50 #070-000-002AT Single Point Buttplate, Adj. LOP,

7K99K51 109.99

RECOIL-LESS ENGINEERING GUN NUT II

Customize Your Gun's Length

Unique, buttstock anchor lets you quickly adjust stock length by adding, removing, or switching spacers and recoil pads. Steelto-steel thread attachment keeps pad from coming loose. Requires drilling 1/4" x 11/4" holes in the buttstock for the screw anchor. Spacers and recoil pads not included. ab SPECS: (2) Steel anchors, in-the-white. Approximately 1" (2.54cm) long. (2) steel, panhead screws. Approximately 1" (2.54cm) long. #763-000-001AT Gun Nut II, 3F15M77 $17.99

GRACO

ADJUSTABLE BUTT PLATE

Adjusts For Length, Drop and Rotation

Three-way adjustments for perfect gun fit, higher scores and improved shooting comfort. Base plate mounts to gun, your pad mounts to pad plate and the threaded tube provides a total of 11/8" in/out adjustment. Make full turns or stop the rotation anywhere in 360? and lock with the socket head set screws. Slotted top plate allows 11/2" vertical adjustment. Slide a Breako recoil reducer (listed elsewhere) into the tube for a neat, compact installation. Combine with Graco's Adjustable Comb Hardware (listed elsewhere) to make your own "Try Stock". ab SPECS: Matte finished aluminum. 513/16" (14.7cm) long x 2" (5cm) wide x 9/16" (14.3mm) thick (adjusted fully "in"). Base plate attaching holes are 31/4" (82.5mm) center-to-center. Standard Model for pumps, over/unders and side-by-sides has threaded tube centered between attaching holes. Auto Model for Remington 1100, 11-87, Beretta 302/303 etc., positions tube 1/2" (12.7mm) closer to top attaching hole to clear action spring tubes. Both require drilling 11/8" (28.6mm) hole in stock. #352-150-100AT Standard Adjustable Butt Plate,

2E54H53$59.99 #352-150-101AT Auto Adj. Butt Plate, 2E54K53 59.99

CSP PAD ADJUSTER

Fast, Easy, Three-Way Adjustment

Machined aluminum plates give a full 1" vertical and 1/2" horizontal left-right, plus 90? diagonal leftright adjustment. All adjustments are accomplished through a single hole in pad. b a SPECS: Aluminum, anodized, black. Total thickness: .290" (7.4mm). Length: 53/4" (14.6cm). Width: 2" (5cm). #365-000-001AT Pad Adjuster, 5F76J63$79.99

GRACO

ADJUSTABLE PAD PLATE

Complete Adjustment For The Perfect Fit

Two eccentric cams and multiple mounting hole provide a huge range of adjustments for height, cast and rotation. ab SPECS: Aluminum, matte finish. Stainless steel cams. 61/8" (15.5cm) high, 2" (5cm) wide. 11/2" (3.8cm) vertical, .72" (18.2mm) horizontal. Adds 3/8" (9.5mm) to stock length. Includes screws and hex wrenches. #352-000-002AT Adjustable Pad Plate, 2E44K38 $49.99

CSP

ADJUSTABLE STOCK HARDWARE

Makes Rifle & Shotgun Combs Fully Adjustable

Easy-to-install hardware, in two kit styles, makes any wood stock fully adjustable for comb height and cast. Locking set screws secure adjustments. Comb hardware is interchangeable between kits. Adjustable Disk Kit - features separate bases that are inlaid into the stock and comb. Adjustable Plate Kit - has a one-piece base that is inlet into the stock and the insert bases for the comb. Brass only. ab SPECS: Machined 360 brass or stainless steel. Gives .168" (4.28mm) cast and .50" (12.7mm) height adjustment. Includes bases, sleeves, set screws, Allen wrenches, comb pattern and instructions. Requires permanent alterations to the stock.

#365-102-000AT Brass Adjustable Disk Hardware Kit, 5F74B68 $77.99

#365-102-100AT SS Adjustable Disk Hardware Kit, 5F79B31 81.99

#365-104-000AT Brass Adjustable Plate Hardware Kit, 5F75C99 75.99

JONES

STOCK ADJUSTER

Fast, Hassle-Free Stock Adjustments To Match Any Shooting Style

Give greater versatility to your shotgun or rifle with up to 1" vertical drop, 22? left or right tilt, and 5/16" horizontal offset of the recoil pad or buttstock position. Ultra-thin, multi-position stock plates add only 1/4", yet provide fast, easy, vertical, horizontal, and diagonal adjustments of buttstock position to match changes in shooting style, clothing, or shooting conditions. Machined steel thread inserts give fast recoil pad changes. Completely pre-drilled, threaded, and made from easy-to-grind aluminum. Browning model is pre-shaped and contoured to fit the Browning Citori Plus and BT99. ab SPECS: Machined 6061T6 aluminum, anodized, black. Includes mounting hardware and Allen wrenches. Standard Jones Adjuster - 53/4" (14.6cm) long, 2" (5cm) wide, 1/4" (6.3mm) thick. Fits recoil pads with 31/8" c-to-c hole spacing. Browning Adjuster - 5.06" (12.85cm) long, 1.835" (4.66cm) wide, .295" (7.5mm) thick, with slotted lower screw hole for c-to-c spacing of 3.14" to 3.48" (7.97cm to 8.84cm) on the stock side and 3.12" (7.92cm) on the pad side. Fits Citori Plus and BT-99. Will not fit 525 Sporting Clays models.

#763-100-000AT Jones Stock Adjuster, 3F56K85 $64.99 #763-100-001AT Brwng Stock Adjuster, 3F59M55 67.99

THROUGH-THE-PAD STOCK ADJUSTER Unique coupling system between the plates allows you to make adjustments without removing the recoil pad from the adjuster and provides more precise horizontal, vertical, and diagonal adjustability than the standard model. Simply drill two small 5/16" to 3/8" diameter holes in the pad, so you can insert the included Allen wrench to loosen the two hex-head screws and reposition the adjuster. Allows 17/16" vertical adjustment, 5/16" horizontal offset, and up to 40? left or right tilt. ab SPECS: Machined 6061 aluminum, black, anodized finish. 511/16" (14.5cm) long, 2" (5cm) wide, 13/32" (10mm) thick. Fits recoil pads with 31/8" c-to-c hole spacing. Includes mounting hardware and Allen wrench. #763-000-002AT Through-The-Pad Adjuster,

3F67H30 $75.99

SPEEDLOCK

ADJUSTABLE BUTT PLATE

Designed & Used By National HighPower Champion, David Tubb

Gives full, four-way (length of pull, drop at heel, height at comb and angle of stock) adjustment to any rifle or shotgun with just a quick turn of the wrench. Fully-ground, beautifullyshaped fixture is ready to install and use. Includes black Pachmayr Presentation pad. ab SPECS: Aluminum plates, black, rubber, recoil pad. 2" (5cm) wide, 53/8" (13cm) long, 33/8" center-to-center hole spacing Adjustment Limits - + 13/4" (4.4cm) length of pull, - 3/4" (19mm) drop at heel, + 3" (7.6cm) height at comb. 180? rotation of angle of stock. 11/2 lb. (594 g) wt. Includes mounting screws.

#840-500-001AT Adjustable Butt Plate, 4H135J43 $150.99

MORGAN

ADJUSTABLE RECOIL PAD

Customized Fit For More Comfortable, More Accurate Shooting

Get increased shooting comfort

and increased accuracy with the

original, adjustable pad. Separate, ABS

plastic plate with movable, foam core

pad makes your buttstock quickly

and easily adjustable for stock pitch,

drop and degree of recoil absorp-

Curved

Straight tion, so your gun fits and feels the

way it should. Available with either a

smooth-face, curved, trap-style pad or a straight, checkered-face,

hunting-style pad. Installation requires only minor modifications.

May require plugging and redrilling of pad/buttplate screw holes. ab

SPECS: Base Plate; ABS plastic, black. 51/4" (13.3cm) long x 17/8" (4.8cm)

wide. Pad; Rubber, black. 5" (10cm) long x 11/4" (3.1cm) thick. Includes

instructions and mounting screws.

#557-100-005AT Morgan Straight Pad, complete, 7E37K23 $42.99

#557-100-004AT Morgan Curved Pad, complete, 7E37N23 42.99

#557-100-105AT Straight Shoulder Pad, only, 7E25I20 28.99

#557-100-106AT Curved Shoulder Pad, only, 7E25Q20 28.99

PREMIUM ADJUSTABLE RECOIL PAD - Premium version with the same adjustability and contours as the standard model, but with a CNC machined, aluminum base plate for added strength and rigidity. Available with Short or Long base plate for easy fitting to a variety of stock sizes. SPECS: Base Plate - Machined aluminum, natural, polished finish. Short - 51/8" (13cm) long x 17/8" (4.8cm) wide base plate. Long - 55/16" (13.5cm) long x 17/8" wide base plate. Pad - Rubber, black. 5" (10cm) long x 11/4" (3.1cm) thick. Includes mounting screws and instructions.

#557-000-001AT Short Curved Premium Pad, 7E63K00 $69.99

#557-000-002AT Long Curved Premium Pad, 7E63N00 69.99

#557-000-003AT Short Straight Premium Pad, 7E63P00 69.99

#557-000-004AT Long Straight Premium Pad, 7E63N00 69.99

stock adjusters

Orders/Tech: 800-741-0015

order on the web



PAGE407

STOCK WORK

GRACO

ADJUSTABLE COMB HARDWARE

The Proper Hardware To Make Adjustable Rifle

& Shotgun Combs

Lets the shooter infinitely adjust head placement to get best fit for any type of shooting: rifle position shooting, changing between scopes and iron sights or using a shotgun for both field and trap shooting. Allows comb to adjust four ways: up, down, plus left and right. Comb height is adjusted by sleeves inlet into the cut-off top of the comb, and locked with set screws through side of stock. Left and right adjustment is provided by posts sliding in milled slots in the base plate and locked with set screws. Requires cutting of stock and bedding of plates and sleeves into stock. Stock cannot be returned to original condition. 350D features easy-to-see graduation marks for exact, repeat setting of left and right adjustment. SPL #870 and SPL #1000 are individual sleeves attached to separate circular base plates that allow greater flexibility in left and right comb placement and angle. ab SPECS: Aluminum. #425 - 41/4" (10.8cm) long x 1" (2.5cm) wide x 1/4" (6.3mm) thick. #350 & 350D - 31/2" (8.9cm) long. Width/thickness same. SPL #870 - .870" (22.14mm) diameter base. SPL-#1000 - 1" (2.5cm) diameter base. SPL models include two each, base plates, posts and sleeves.

#352-100-425AT #425 Adjustable Comb Hardware, 2E34I74 $39.99

#352-100-350AT #350 Adjustable Comb Hardware, 2E34M74 39.99

#352-000-008AT #350D Adjustable Comb Hardware, 2E52E56 59.99

#352-100-870AT SPL #870 Adjustable Comb Hardware, 2E34G74 39.99

#352-000-005AT SPL #1000 Adjustable Comb Hardware, 2E34Q74 39.99

ADJUSTABLE COMB TRANSFER PLATE - Marks the precise location for the bushing holes in the comb piece quickly and easily. Before permanently anchoring the base plate in the pocket you've cut in the stock, insert the transfer plate with the points of the two, hardened steel punch screws facing up. Position the comb piece on the stock, then press down hard or rap it sharply with the heel of your hand to scribe the exact hole locations. Depth of the scribe marks can be adjusted by raising or lowering the punch screws with the included Allen wrench. Transfer plate has tapped hole to accept screw-in plastic knob, also included, for easy removal of plate. SPECS: Aluminum, anodized, red or blue, depending on model. 350TP 31/2" (8.9cm) long, 1" (2.5cm) wide, 1/4" (6.3mm) thick. 425TP - 41/4" (10.8cm) long, 1" wide, 1/4" thick. 870TP - Two, .870" (22.1mm) diameter base plates, 1/4" thick. 1000TP - Two, 1" diameter base plates, 1/4" thick. Each kit includes two adjustable punch screws, Allen wrench, and removal knob. #352-000-013AT 350TP Adjustable Comb Transfer

Plate, 2E15L41 $20.00 #352-000-014AT 425TP Adjustable Comb Transfer

Plate, 2E15G41 20.00 #352-000-015AT 870TP Adjustable Comb Transfer

Plate, 2E15L41 20.00 #352-000-016AT 1000TP Adjustable Comb Transfer

Plate, 2E15H41 20.00

100 STRAIGHT

DEAD MULE RECOIL REDUCER

Can't Kick

Mechanical piston reduces felt recoil without changing the point of impact. Fits in any buttstock with a 7/8" dia. x 41/2" deep stock bolt hole. ab SPECS: Steel body. 7/8" (22mm) diameter, 41/2" (11cm) long. #365-509-100AT Dead Mule Stock Model, 5F69G99 $69.99

DANUSER COUNTER COIL?

RECOIL REDUCER

Put A Hydraulic Shock Absorber Between Recoil & Your Shoulder

Easy-to-install, precision machined, hydraulic unit can improve the comfort of any rifle or shotgun without huge increases in weight or changes in gun's natural balance. Uses smooth, quiet, hydraulic shock absorber action to counteract and soften up to 52% of the actual recoil force. Helps improve accuracy because the shooter can maintain concentration on the target and not on painful recoil. Hydraulic dampening effect is quickly adjustable to match both the needs of the shooter and the recoil of the gun. ab SPECS: Aluminum plates, brass cylinder. Plates - 2" (5cm) wide, 6" (15.2cm) high. Cylinder - 31/8" (7.9cm) long, 1" (2.5cm) diameter 12 oz. (340 g) wt. Requires shortening of stock. Adds 1.25" (3.1cm) to length of pull. Kit includes installation hardware, complete instructions. #232-100-000AT Danuser Counter Coil, 2C199G99 $199.99

COUNTER COIL ADJUSTABLE - All the great features of the Counter Coil with the addition of two, rotating cams to provide a full range of adjustment. Lets you easily set vertical and horizontal plus, left and right cant to fit your needs. ab SPECS: Aluminum plates, brass cylinder. Plates - 2" (5cm) wide, 6" (15.2cm) high. Cylinder - 31/8" (7.9cm) long, 1" (2.5cm) diameter 12 oz. (340 g) wt. Requires shortening of stock. Adds 1.25" (3.1cm) to length of pull. Kit includes installation hardware, complete instructions.

#232-000-001AT Adj. Counter Coil, 2C269B99 $269.99

C&H RESEARCH

MERCURY RECOIL SUPPRESSOR

Uses Inertia To Absorb Painful Recoil

Helps counteract the

painful effects of recoil using mercury, one of the

Chamber Model

heaviest, densest, liquid elements. Compact, perma-

Stock Model

nently-sealed, steel case is

made from bar stock; the only moving part is the liquid mercury so

there's no wear, no chance of leaks. Mercury's viscosity varies only

1% from 0? F. to 90? F. which means the recoil-fighting performance

is consistent in almost all weather conditions. Stock Models fit in

rifle or shotgun stocks and are drilled and tapped 1/4"-28 tpi for easy

installation and removal. Magazine Tube fits into the 4-round mag-

azine tube of a pump or semi-auto shotgun. Replaces the migratory

bird plug. Includes nylon spring seat adapters for 12 gauge guns, also

fits 20 gauge shotguns with adapters removed. ab

SPECS: Machined, stainless steel tubes. Stock 4" A - .875" dia., 11 oz. (312

g) wt.Stock 4" B - 3/4" (19mm). Stock 4.25" - 11/16" (17mm) dia.. Stock - 5"

A - .750" (19mm) dia., 11 oz. wt. Stock 5" B - 7/8" (22mm) dia. Chamber -

5" long x .750" dia., 11 oz. wt. Magazine Tube - 5" (12.7cm) long x .750"

(19mm) dia., 11 oz. wt. T-Handle - Aluminum handle, stainless steel shaft.

1/4"-28 threads, 3.25" (8.2cm) x 6" (15.2cm).

#163-100-002AT Standard Stock 4" A Recoil Suppressor, 3F45D85 $49.99

#163-000-006AT Standard Stock 4" B Recoil Suppressor, 3F45H85 49.99

#163-000-005AT Standard Stock 4.25" Recoil Suppressor, 3F45K85 49.99

#163-000-004AT Standard Stock 5" A Recoil Suppressor, 3F45B85 49.99

#163-000-007AT Standard Stock 5" B Recoil Suppressor, 3F45Q85 49.99

#163-100-001AT Magazine Tube Recoil Suppressor, 3F58F69 64.99

GRACO

RECOIL REDUCTION SYSTEM

Mercury-Filled, Controls Recoil, Increases Comfort

Lessens the effects of felt recoil to improve your scores; lets you concentrate on your shooting, not on a bruised shoulder. Permanently sealed cylinders contain mercury that resists recoil to absorb shock. Provides even more "cushion" for medium to heavy shotgun loads and magnum rifles. Shorter skeet model for maximum recoil control when shooting skeet and sporting clays. Fits in the draw bolt hole. May require drilling one 7/8" diameter hole in some stocks. ab SPECS: 7/8" (22mm) diameter. Standard 4" (10.1cm) long. 13 oz. (369g). Skeet 3" (7.6cm) long. 9 oz. (255g) wt. #352-200-101AT Breako Std System, 2E51D20 $54.99 #352-200-102AT Breako Skeet System, 2E45Q92 52.99

RIFLE MERCURY SYSTEM - Smaller diameter, sealed, mercury-filled cylinder can be inletted into rifle forearms. Combine with Standard 4" unit in the buttstock to tame recoil on magnum rifles and help keep the rifle "balanced". ab SPECS: 5" (12.7mm) long, .574" (14.5mm) diameter. 8 oz. (227 g). Installation requires alteration to forearm. #352-205-000AT Rifle Mercury System, 2E45P92 $52.99

UNIVERSAL MERCURY SYSTEM - Fits a wide selection of rifles and shotguns. Compact size fits in buttstocks or magazine tubes. Special screw allows fitting to forearm caps on most shotguns. Requires drilling a 5/16" hole in cap. Nicely blued and polished to match the finish on most guns. ab SPECS: 3" (7.6cm) long, .840" (21mm) dia. 8 oz. (227 g) weight. #352-000-003AT Uni. Mercury System, 2E47E67$50.79

SPEEDBUMP STOCKWORKS

KEN RUCKER'S AUTO-BUSTERTM

RECOIL REDUCTION SYSTEM

Buttstock-Mounted System Tames Felt Recoil; Increases Shooter Comfort & Control

Adjustable, buttstock-mounted recoil absorption system transforms recoil from a sharp, painful slap to a slow, manageable push. Ideal for beginners, youth, and smaller-statured shooters, the AutoBuster prevents bad habits, like flinching or lifting your head to avoid recoil, from starting in the first place and helps experienced shooters overcome them. May be installed on a wide range of rifles and shotguns, including semi-auto competition shotguns, with minimal protrusion into the stock. Dual machined aluminum buttplates contain an exclusive spring system that allows the shooter to customize the amount of recoil reduction by selecting interchangeable Light, Medium, and Heavy tension springs (included). Rear plate is adjustable for drop at heel and 360? rotation simply by loosening and tightening a single Allen head bolt. Comes drilled and tapped to accept a wide variety of aftermarket recoil pads with 31/8" center-tocenter hole spacing. Gunsmith installation recommended; requires removal of existing buttpad or plate and shortening the stock. ab SPECS: Body - machined aluminum, natural silver finish. Guide/Spring System - stainless steel. 61/8" (15.5cm) tall, 2" (5cm) wide, 12 oz. (340g) weight. Includes light, medium, and heavy spring sets, mounting hardware, Allen wrenches, and installation instructions. #100-004-743AT Auto Buster Recoil Reduction

System, 9D286G49 $309.99

GRACO

GRACOIL RECOIL REDUCER

Fully Adjustable Spring System Cushions Your Shoulder

Stainless steel piston riding in a Teflon sleeve smoothly softens recoil. Improves comfort and concentration for more accurate shooting. Adjustable friction spring lets you fine tune the dampening effect for heavy and light loads. Buttplate has a wide range of vertical and horizontal adjustments. Pad plate is drilled and tapped for standard recoil pads. ab

GRACOIL STANDARD - Vertical and horizontal adjustments for drop and cast improve stock fit and increase shooting comfort. Thin, pad mounting plates prevent compression pinching and minimize amount of material to be removed for easier fitting. Rifle Recoil Reducer has a stronger compression rate to accomodate the punchier recoil of rifles, and guide pins and mounting screw holes are closer together to accomodate smaller rifle stocks. Also recommended for heavier recoiling 3" and 31/2" magnum shotguns. ab SPECS: Aluminum, natural matte finish. 61/8" (15.5cm) high, 2" (5cm) wide. Adjustments - 11/2" (3.8cm) vertical, 3/4 " (18.2mm) horizontal, 360 degree rotation. 5/16" (7.9mm) stroke. Adds 1" (2.5cm) to length of pull. May require shortening stock. #352-110-000AT GraCoil Std. Shotgun Recoil

Reducer, 2E171C57 $179.99 #352-000-010AT GraCoil Std. Rifle Recoil Reducer,

2E171P57 179.99

GRACOIL ADJUSTABLE LENGTH OF PULL Quickly gives up to 3/4" adjustment for length of pull plus drop and cast adjustments. Improves stock fit to accommodate different shooting styles. Provides correct fit when wearing heavy or light clothing. Allows two shooters to use the same gun with equal comfort. ab SPECS: Aluminum, matte finish. 61/8" (15.5cm) high, 2" (5cm) wide. Adjustments - 11/2" (3.8cm) vertical, .72" (18.2mm) horizontal, 360? rotation. 5/16" (7.9mm) stroke. Adds 1" (2.5cm) to length of pull. May require shortening stock. #352-000-001AT Adj. LOP Recoil Reducer,

2E269I99 $269.99

UNIVERSAL FITTING FIXTURE Firmly secures GraCoil, Graco Adjustable Butt Plates, recoil pads, or other butt plate hardware while cutting and grinding to proper size and contours. Unique design lets you remove most of the excess material quickly with a band saw, while preventing damage to the part caused by excessive heat buildup from prolonged grinding. Allows you to set the correct heel and toe angles of butt pads and hold them while grinding. Multiple screw holes in the mounting plates provide compatibility almost all types of hardware and recoil pads. ab SPECS: Aluminum, anodized, matte red. 4" (10.2cm) long, 11/2" (3.8cm) wide, 113/16" (4.6cm) high. Includes mounting hardware and Allen wrench. #352-000-012AT GraCoil Universal Fitting Fixture,

2E45N72 $55.99

QUESTIONS BEFORE YOU BUY?

Ask Our Full-Time Tech Staff

800-741-0015

STOCK ADJUSTERS

RECOIL REDUCERS

PAGE408

SATISFACTION GUARANTEED

SINCE 1939

Office/Tech: 641-623-5401

ST1O91C1KAWUTOORK

10f/2it2tPiEnRgFjOigRMs &ANgCaEuPgAeRsTS

EDWARDS RECOIL REDUCER

Absorbs & Redirects Recoil

Aluminum cylinder with springs and piston absorbs recoil to minimize barrel bounce. Fits drawbolt hole in shotgun buttstock or, drill a hole in rifle stocks. Adjustable model directs felt recoil away from your cheek. 3" model fits Krieghoff and others with adjustable pads and combs. ab SPECS: Aluminum, silver. 3" (7.62cm) long, 6 oz. wt., 31/2" (8.9cm) long, 6 oz. wt., 4" (10.2cm) long, 6 oz. wt. Non-adjustable - 7/8" (22.2mm) diameter. Adjustable - 1" (2.5cm) diameter.

STOCK # #100-000-311AT #100-000-312AT #100-000-314AT #100-000-315AT #100-000-316AT

ADJ. Adj. Non-Adj. Non-Adj. Adj. Non-Adj.

LENGTH 3" 3" 31/2" 4" 4"

PRICE 3K51F71 $61.99 3K47C35 $56.99 3K47Q35 $56.99 3K51B71 $61.99 3K47A35 $56.99

"THE MAX" RECOIL REDUCER Extra-length provides maximum recoil reduction for magnum rifles and shotguns. 7/8" diameter works in bored holes or drawbolt channels of wood stocks, easily glued into synthetics. ab SPECS: Aluminum, polished finish. 5" (12.7cm) long x 7/8" (2.2cm) diameter. 7.5 oz. (213g) wt.

#100-001-949AT The MAX Recoil Reducer, 3K61A85 $66.99

GRACO RECOIL REDUCER

DRILL FIXTURE

Inlets Buttstocks For Tubular Recoil Reducers

Everything you need to drill straight, correctly located and centered holes in buttstocks for installing 7/8" diameter, tubular recoil reducers. Steel fixture saves you hours of "eye-balling" and trial and error, so you can provide your customers a valuable service at a reasonable cost, while still earning a decent profit. Sturdy, blued steel locating plate attaches to buttstock using the gun's existing recoil pad screws and is slotted to adjust to any screw hole spacing. Nylon-lined guide bushing keeps the hardened tool steel 7/8" Forstner drill bit centered, and stop collar locks onto bit shank to prevent drilling too deep on the first pass. Once hole is started, remove the locating plate and use the drill bit and guide bushing to drill the rest of the way. ab SPECS: Steel, blue finish. Includes locating plate, drill guide bushing, 7/8" (2.2cm) diameter Forstner bit, stop collar with setscrews, Allen wrench, and complete instructions.

#352-000-009AT Recoil Reducer Drill Fixture, 2E69B65 $80.79

PACHMAYR

RECOIL PAD GRINDING TEMPLATES

Prevents Grinding Into Steel Reinforcement Plates

Brass templates lets you know where the steel reinforcement plates are in all closed-side Pachmayr recoil pads to keep you from cutting into them when shaping a recoil pad. Place the template behind the new pad and visibly check the amount of clearance left while shaping. Set of four templates work with small, medium, large, and large magnum recoil pads. ab SPECS: Brass templates. Set of four for small, medium, large and large magnum Pachmayr recoil pads.

#690-000-019AT Recoil Pad Grinding Templates, 5K17B14 $19.99

PULL & DROP GAUGE

Fast, Accurate Measurements For

Stock Fitting

Proper stock "Pull"

is one of those gun

functions that is vitally important to the own-

DROP AT HEEL

er's shooting proficien-

cy, yet few shooters

understand what it is, or

why a stock may either

fit right out of the box,

or have to be length-

LENGTH OF PULL

ened or shortened to fit

him personally. To find

the correct pull for a customer, you must measure

him! Our Pull & Drop Gauge, beautifully made of oil

finished solid cherry, is a professionally designed tool

to do two important jobs: 1) Accurately and quickly

measure the pull and drop of the shooter's forearm

and trigger-finger. 2) Add professionalism and authenticity to your

explanation of "Pull and Drop" to increase sales, and to generate

interest in correct pull and drop for more custom fitting jobs. ab

SPECS: Long "Leg" is 24" (61.0cm) long x 13/8" (3.5cm) wide x 3/8" (9.5mm)

thick. Short "Leg" is 6" (15.2cm) long x 13/16" (3.1cm) wide x 7/8" (22.2mm)

thick.

#080-033-000AT Pull & Drop Gauge, 8K34L07 $40.85

B&R RECOIL PAD

FITTING JIG

Lets You Do Fast, Professional,

No-Mar Pad Installation

One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock.

The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table.

Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit!

The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise making the job an easy and highly profitable one. ab SPECS: Steel support is 20?" (51.4cm) long. Steel triangle legs are approximately 11?" (29.2cm) long. Aluminum base plate is 3?" (9cm) long. Includes instructions. #080-000-868AT Recoil Pad Fitting Jig, 8K85C72 $99.99

ROBERT LOUIS CO.

SHOTGUN COMBO GAUGE

Gun and rest not included

Gives You Precise Measurements For A

Perfect Fit

Lightweight, aluminum gauge measures length of pull, drop at comb and heel, and angle of pitch to give a precise fit. Units of measurement are in bold, easy-to-read numbers in both inches and metric for world-wide use. Measures length of pull to 24" and has an overall length of 29.5". With a length of 28", you can accurately measure drop. Optional 23" Magnetic Extension "glues" the Shotgun Combo Gauge to the rib or barrel using a magnet for handsfree operation. Extension adds 20" to steady the tool for easy drop measurement. Plastic protractor measures 180 degrees of pitch. ab SPECS: Shotgun Combo Gauge - Aluminum. Overall length 28" (71cm) Magnetic Extension - Aluminum. Overall length 23" (58.5cm). #100-002-154AT Shotgun Combo Gauge,

9A139K31 $150.00 #100-002-155AT Magnetic Extension, 9A72Q87 79.00

JERRY FISHER

CUSTOM STOCK TEMPLATE

Full-Scale Dimensions For Duplicating Classic

Designs

Full-scale templates by master stock maker Jerry Fisher allow you to duplicate his classic stock designs. Features critical dimensions that are almost impossible to measure accurately from an actual stock for easy layout on your favorite blank or an existing stock. Great reference source and starting point for designing your own custom rifle stock. Mauser 98 is a lightweight sporter design for 22" barrels, measured from the bolt face, with .525" maximum muzzle O.D. Winchester M70 is a medium weight sporter stock for long actions with 22" to 24" barrels. ab SPECS: Heavy paper. 35" (89cm) long x 23" (58cm) wide. Mauser 98 - Stock dimensions: 131/2" (34.3cm) length-of-pull, 5/8" (16mm) drop-atcomb, 3/4" (19mm) drop-at-heel, 21/2" (6.3cm) pitch-down. Winchester M70 - Stock dimensions: 131/2" length-of-pull, 1/2" (13mm) drop-at-comb, 5/8" drop-at-heel, 21/2" pitch-down. #310-000-001AT Mauser 98 Template, 1C23G04$24.99 #310-000-002AT Winchester 70 Template, 1C23D04 24.99

PROJX

STOCKMAKER'S FIT BOARD

For Fitting Over/Under Shotguns

Innovative, easy-touse board take's the guesswork out of fitting shotguns to customers. Simply lay your shotgun on the board and read the length of pull, drop at comb, cast off/on and pitch for all over/under shotguns with barrels up to 30" in length. Bench sized template with large, easy-to-read numbers makes a tough job easy. Heavy-duty, laminated paper is resistant to most solvents. Rolls up for convenient storage. SPECS: Laminated template. 531/2" (136cm) long x 241/2" (62cm) wide. Fits over/under shotguns with barrels up to 30" long. #100-004-269AT Stockmaker's Fit Board, 5B53L39$59.99

CHECKERING TOOL FINGER REST

Delivers Added Comfort & Better Control

Polished, grooved

finger rest improves

comfort and control

of any checkering tool with a square shank 1/8"

Handle & Cutter not included

wide or smaller. An-

chors firmly in place

with two set screws, yet repositions easily. Great for bent needle

files, too. ab

SPECS: Aluminum. 1/2" (1.3cm) dia. x 5/16" (8mm) thick. Fits checkering tools

with 1/8" (3.2mm) wide or less square shank.

#084-000-236AT Finger Rest, 5-pak, 4H17P70$19.99

THE "JOINTER"

Saves The Day When A Line Starts Astray!

A tool that's not often used until it is needed - and then it's the most necessary checkering tool you can own! Its main purpose is to straighten out checkering lines which have gone astray, and to make layout and other lines really straight. There isn't a checkerer alive, pro or rank novice, who, at one time or another, hasn't had a line suddenly head for left field. Straightening out such a line - without a Jointer Tool - can easily drive you right up the wall! A "must-have" for the beginner or professional checkerer. ab SPECS: Tool Steel, the right hardness so you can resharpen with 60? 3-square file, 7/8" (22.2mm) cutting area, 90? only.

#080-556-000AT Jointer Tool, 8K39M64 $45.00

NO. 131

CHECKERING RIFFLER

Shapes The Diamonds Smoothly, Professionally

Checkering Rifflers are used by many professional checkerers and stockmakers instead of bent needle files for pointing-up checkering, cleaning up damaged or old checkering, and border work. The No. 131 we recommend and carry has a full 3-square shape, cutting a perfect 60? angle. File teeth meet exactly square on corners, will cut finest hairline cut at bottom of diamond grooves. Has approximately 35? up-bend at tip. Exceedingly nice to work with. SPECS: 6" (12.7cm) long. "V" is 60?. Approx. 1" (2.5cm) edge. #360-318-971AT No. 131 Checkering Riffler,

6C32P99$32.99

DEM-BART

CHECKERING GAUGE

Fast, Accurate Determination Of Checkering Size

Easy-to-use template identifies checkering spacings from 16 to 32 lines-per-inch. Place over pattern to be measured and match the lines on the proper scale. Oblique diamond shape helps provide accurate determination of layout lines. ab SPECS: 9" (22.9cm) x 23/4" (7cm). #241-000-001AT Checkering Gauge, 1D4K67 $6.99

10/C2H2EPCEKREFROIRNMGASNUCPEPLPIAERSTS

recoil reducers

Orders/Tech: 800-741-0015

order on the web



PAGE409

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download