Silver Peak Command Line Interface Reference Guide

[Pages:488]Silver Peak

Command Line Interface Reference Guide

8.8 2019 200063-001

Silver Peak Command Line Interface Reference Guide

Copyright and Trademarks

Silver Peak Command Line Interface Reference Reference Guide

Date: November 2019

Copyright ? 2019 Silver Peak Systems, Inc. All rights reserved. Information in this document is subject to change at any time. Use of this documentation is restricted as specified in the End User License Agreement. No part of this documentation can be reproduced, except as noted in the End User License Agreement, in whole or in part, without the written consent of Silver Peak Systems, Inc.

Trademark Notification

The following are trademarks of Silver Peak Systems, Inc.: Silver Peak SystemsTM, the Silver Peak logo, Network MemoryTM, Silver Peak NX-SeriesTM, Silver Peak VX-SeriesTM, Silver Peak VRX-SeriesTM, Silver Peak Unity EdgeConnectTM, and Silver Peak OrchestratorTM. All trademark rights reserved. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.

Warranties and Disclaimers

THIS DOCUMENTATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SILVER PEAK SYSTEMS, INC. ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS IN THIS DOCUMENTATION OR OTHER DOCUMENTS WHICH ARE REFERENCED BY OR LINKED TO THIS DOCUMENTATION. REFERENCES TO CORPORATIONS, THEIR SERVICES AND PRODUCTS, ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. IN NO EVENT SHALL SILVER PEAK SYSTEMS, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS DOCUMENTATION. THIS DOCUMENTATION MAY INCLUDE TECHNICAL OR OTHER INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THE DOCUMENTATION. SILVER PEAK SYSTEMS, INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENTATION AT ANY TIME.

Silver Peak Systems, Inc. 2860 De La Cruz Boulevard Santa Clara, CA 95050

1.877.210.7325 (toll-free in USA) +1.408.935.1850



Copyright ? 2019 by Silver Peak Systems, Inc. All rights reserved

2

Silver Peak Command Line Interface Reference Guide

Support

For product and technical support, contact Silver Peak Systems at either of the following:

1.877.210.7325 (toll-free in USA) +1.408.935.1850 support

We're dedicated to continually improving the usability of our products and documentation.

If you have suggestions or feedback for our documentation, send an e-mail to techpubs@silver-. If you have comments or feedback about the interface, send an e-mail to usability@.

Copyright ? 2019 by Silver Peak Systems, Inc. All rights reserved

3

Silver Peak Command Line Interface Reference Guide

Contents

Copyright and Trademarks Support

Using the Command Line Interface CLI Modes User EXEC Mode Privileged EXEC Mode Global Configuration Mode User Privilege Levels Monitor Administrator User Names Passwords Naming Objects Understanding the Command Syntax Syntax Helper Command History Conventions Used in this Manual Typographical Conventions Syntax Notation Using the Command Line-Editing Keys Configuring DB-9 Console Access to the Appliance

Administration Commands aaa authentication login default aaa authorization map arp boot system clear cli configuration email email send-test excess-flow file debug-dump file job upload file stats file tcpdump file upload cancel help image boot image install image upgrade job job execute license

Copyright ? 2019 by Silver Peak Systems, Inc. All rights reserved

2 3

11 12 12 13 14 15 15 15 16 17 18 19 19 19 20 20 20 21 22

23 24 26 28 29 30 32 35 39 41 42 43 45 46 47 48 49 51 52 53 54 56 57

4

Silver Peak Command Line Interface Reference Guide

radius-server reboot reload system disk system eclicense system firmware system passthru-to-sender system peer-list tacacs-server tca terminal username web write

Configuration Commands access-list IP Address and Netmasks Using Deny active-flows application application-group banner login banner motd bgp bridge cdp cifs signing delegation domain clock set clock timezone cluster configure terminal disable dns cache enable enable password exit flow-export flow-redirection hostname iflabel interface cdp interface dhcp interface inbound-max-bw interface ip address interface label interface lan-if interface mac address interface mtu interface outbound-max-bw

Copyright ? 2019 by Silver Peak Systems, Inc. All rights reserved

58 60 61 62 63 64 65 66 67 69 73 75 77 79

81 82 84 85 87 88 90 92 93 94 97 98 99 101 102 104 106 107 108 109 110 112 113 115 116 117 118 119 120 121 123 124 125 126 127

5

Silver Peak Command Line Interface Reference Guide

interface pass-through interface security-mode interface shutdown interface speed-duplex interface tunnel admin interface tunnel alias interface tunnel bind-tunnel interface tunnel control-packet interface tunnel create interface tunnel gre-protocol interface tunnel ipsec interface tunnel max-bandwidth interface tunnel min-bandwidth interface tunnel mode interface tunnel mtu interface tunnel nat-mode interface tunnel packet interface tunnel peer-name interface tunnel revert interface tunnel tag-name interface tunnel threshold interface tunnel traceroute interface tunnel udp-flow interface tunnel udp-port interface virtual interface vrrp interface wan-if ip datapath route ip default-gateway ip domain-list ip host ip mgmt-ip ip name-server ip route ip-tracking nat-map nat-map activate nat-map comment nat-map match nat-map modify-priority nat-map set no nat-map no opt-map no qos-map no route-map ntp ntpdate opt-map opt-map activate opt-map comment opt-map match

Copyright ? 2019 by Silver Peak Systems, Inc. All rights reserved

128 129 130 131 132 133 134 135 137 139 140 142 143 144 146 147 148 150 151 152 153 155 156 157 158 160 163 164 166 168 169 170 171 172 174 176 179 180 181 184 185 187 188 189 190 191 193 194 196 197 198

6

Silver Peak Command Line Interface Reference Guide

opt-map set overlay preposition ftp qos-map qos-map activate qos-map comment qos-map match qos-map modify-priority qos-map set route-map route-map activate route-map comment route-map match route-map modify-priority route-map set saas shaper inbound shaper outbound snmp-server snmp-server user v3 ssl auth-certificate ssl builtin-signing ssl cert-substitution ssl host-certificate ssl signing-certificate ssl subs-certificate subnet system arp-table-size system auto-ipid system auto-mac-configure system auto-policy-lookup system auto-subnet system auto-syn system auto-tunnel system auto-tunnel allow system bandwidth system bonding system bypass system contact system disk encryption system dpc system hostname system igmp-snooping system int-hairpin system location system mode system nat-all-inbound system nat-all-outbound system network-memory system registration system router

Copyright ? 2019 by Silver Peak Systems, Inc. All rights reserved

202 206 209 211 213 214 215 219 220 222 224 225 226 230 231 234 236 238 241 244 246 248 249 250 252 254 255 257 258 259 260 261 263 264 265 266 267 268 270 271 272 273 274 275 276 277 280 281 282 283 284

7

Silver Peak Command Line Interface Reference Guide

system routing system smb-signing system ssl-ipsec-override traffic-class wccp

Monitoring Commands monitor show aaa show access-list show alarms show application show application-builtin show application-group show arp show banner show bgp show bootvar show bridge show cdp show cifs signing delegation show cli show clock show cluster show configuration show email show excess-flow show files show flow-debug show flow-export show flow-redirection show hosts show iflabels show image show interfaces show interfaces cdp show interfaces pass-through show interfaces security show interfaces tunnel show interfaces virtual show interfaces vrrp show ip show ip-tracking show jobs show licenses show log show log audit show log-files show log-list matching show logging

Copyright ? 2019 by Silver Peak Systems, Inc. All rights reserved

286 288 289 290 291

295 296 297 298 300 302 305 306 308 309 310 311 312 314 316 317 319 320 321 323 325 326 328 329 330 331 332 334 336 338 340 343 344 347 348 349 351 353 354 355 358 360 362 363

8

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download