Manual SIRIUS 3RM1 Motor Starter - Siemens
Industrial Controls
Load Feeders and Motor Starters
SIRIUS 3RM1 Motor Starter
Manual
Edition
06/2016
SIRIUS 3RM1 motor starter
1
___________________
Introduction
Product-specific safety
2
___________________
information
Industrial Controls
Load feeders and motor starters
SIRIUS 3RM1 motor starter
Manual
3
___________________
Description
4
___________________
Configuration
5
___________________
Mounting
6
___________________
Connection
Operator control and
7
___________________
monitoring
8
___________________
Service and maintenance
9
___________________
Technical data
10
___________________
Dimension drawings
11
___________________
Circuit diagrams
A
___________________
Typical circuits
B
___________________
Directives
06/2016
A5E0345285095020A/RS-AE/005
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ? are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Division Digital Factory
Postfach 48 48
90026 N?RNBERG
GERMANY
3ZX1012-0RM10-2AC1
? 06/2016 Subject to change
Copyright ? Siemens AG 2012.
All rights reserved
Table of contents
1
2
3
Introduction ........................................................................................................................................... 11
1.1
Responsibility of the user for system configuration and functionality .....................................11
1.2
Required basic knowledge ......................................................................................................11
1.3
Scope ......................................................................................................................................12
1.4
Definition .................................................................................................................................12
1.5
Conformity ...............................................................................................................................12
1.6
Further documentation ............................................................................................................13
1.7
Siemens Industry Online Support ...........................................................................................14
1.8
DataMatrix code ......................................................................................................................16
1.9
Quick navigation .....................................................................................................................17
Product-specific safety information ........................................................................................................ 19
2.1
General safety notes ...............................................................................................................19
2.2
Safety information for hazardous areas ..................................................................................20
2.3
Safety instructions for safety-related applications ..................................................................21
2.4
Intended use ...........................................................................................................................23
2.5
Current information about operational safety .........................................................................23
2.6
Declaration of conformity ........................................................................................................24
Description ............................................................................................................................................ 25
3.1
Overview .................................................................................................................................25
3.2
Applications .............................................................................................................................26
3.3
Hybrid technology ...................................................................................................................27
3.4
Device versions .......................................................................................................................29
3.5
3.5.1
3.5.1.1
3.5.1.2
3.5.2
3.5.2.1
3.5.2.2
3.5.2.3
3.5.2.4
3.5.2.5
3.5.2.6
Functions ................................................................................................................................32
Switching the 3RM1 motor starter under normal operating conditions ...................................32
Direct-on-line starter ...............................................................................................................33
Reversing starter .....................................................................................................................34
Protective functions.................................................................................................................35
Overload protection.................................................................................................................35
Equipment protection ..............................................................................................................35
Phase failure protection ..........................................................................................................35
Asymmetry monitoring ............................................................................................................36
Thermal calculation method (motor memory module) ............................................................37
ATEX-certified motor overload protection in the case of 3RM11/3RM13 Failsafe .................38
SIRIUS 3RM1 motor starter
Manual, 06/2016, A5E0345285095020A/RS-AE/005
5
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- size 3 motor starter hp
- 3 phase motor starter contactor
- 3 phase motor starter sizing
- three phase motor starter understanding
- motor starter sizing calculator
- motor starter sizing chart
- electric motor starter sizing chart
- square d motor starter sizing
- nema motor starter sizes chart
- nema motor starter guide
- nema motor starter size
- motor starter sizes