Wiring Instructions for 60-0-60 Ammeter
[Pages:1]Wiring Instructions for 60-0-60 Ammeter
Please read these instructions carefully before installing. All instructions refer to viewing from the rear.
1. Disconnect battery ground cable. 2. Connect an 8 AWG (10.0 mm2) wire, minimum, with an insulation
temperature rating of 220? F (105? C), minimum, from the battery terminal of the alternator to the left terminal on the ammeter (see wiring diagram). 3. Connect an 8 AWG ((10.0 mm2) wire, minimum, with an insulation temperature rating of 220? F (105? C), minimum, from the battery "+" terminal on the starter solenoid to the right terminal on the ammeter (see wiring diagram). 4. Connect ammeter lamp (60-0-60-I only) to existing instrument panel lighting circuit. 5. Reconnect the battery ground cable. 6. If ammeter shows a positive charge when starter is engaged, reverse connections on back of ammeter.
00-02-0207 Revised 2016-02-26 Section 70
5311 S. 122nd East Ave., Tulsa OK 74146 918-317-4100 Fax 918-317-4266 Sales@
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- 1 wire alternator instructions tuff stuff performance
- nfpa 25 faqs
- kubota rtv 500 utility vehicle operators manual
- wiring instructions for 60 0 60 ammeter
- kohler command pro efi
- liquid propane portable generator operation manual
- inspection and testing of emergency generators
- batteries lead acid battery state of charge vs voltage
- installation instructions for 1 wire alternators
- safety data sheet