CEREC inLab 3D PC Requirements



inLab and inEos Computer Recommendations

The inLab and inEos software is a hardware intensive application. Compatibility as well as optimum performance will require specific hardware components. Because of the hardware performance and compatibility requirements, it is recommended that a Desk top PC be selected in lieu of laptops as the platform for running this application and Sirona hardware.

For optimum performance and compatibility, Patterson Dental Company offers PC’s specifically configured for inLab and inEos. It is highly recommended that this PC be purchased.

The purchase of another PC must conform to the one of the following PC hardware specifications listed below to help insure compatibility: (SEE IMPORTANT FOOTNOTES ON PAGE 2) To help insure compatibility, the video card should be used only with the specific motherboard it is listed with.

Athlon

|Operating System: |Microsoft Windows XP Professional (SP2) |

|Processor (CPU): |Athlon 64bit 4000+ with 1MB L2 Cache |

|Memory (RAM): |2 GB DDR 400 DIMM |

|Video Card: |NX7800 GT VT2D256E or NX7800 GTX |

| |VT2D256E 1 |

|Motherboard: |MSI K8N NEO4 Platinum |

|USB Ports: |2 x USB |

|Serial Ports: |1 – 2 x RS232, 9 pin serial ports 2 |

|Parallel Printer Port: |Compatible 25pin parallel printer port 3 |

|FireWire: |Belkin  MFG Part #: F5U503V      |

|CDROM Drive: |CD/DVD drive z.B. : LG 4163B |

|Hard Drive: |120GB, z.B. 250GB/7200RPM/8MB/SATA-150  |

|Monitor: |1280x1024 pixel resolution, 32 bit true color |

Intel

|Operating System: |Microsoft Windows XP Professional (SP2) |

|Processor (CPU): |Intel E6600 (Core2Duo; 2,4GHz) |

|Memory (RAM): |2 GB DDR2 800 DIMM (2 x 1GB) as recommended by mainboard supplier |

|Video Card: |MSI NX7950GT-T2D512E (GeForceNX7950 512MB) 1 |

| |or |

| |MSI NX8800GTS-T2D640E (GeForceNX8800 640MB) 1 |

|Motherboard: |MSI P965 Platinum w/ BIOS version A7238IMS V1.1 MSI |

| |(FSB 1066/800; Socket 775; Chipset intel P965) 4 |

|USB Ports: |2 x USB |

|Serial Ports: |1 – 2 x RS232, 9 pin serial ports 2 |

|Parallel Printer Port: |Compatible 25pin parallel printer port (on motherboard) 3 |

|FireWire: |Belkin  MFG Part #: F5U503V      |

|CDROM/DVD Drive: |SH-S182-D/SH-183-A TSST (Samsung) |

|Hard Drive: |WD RE WD2500YS (250GB Serial-ATA) Western Digital |

|Monitor: |1280x1024 pixel resolution, 32 bit true color |

Footnotes:

1. Computers with video cards other than the above recommendations may experience incompatibilities with the inEos or graphics anomalies within the 3D software.

2. Built in serial ports are required. Compatibility with USB to serial port converters cannot be guaranteed. The number of serial ports required depends on the configuration. You will need 1 RS232 com port for each inLab and inEOS connected to the PC. Each PC can support a maximum of 1 inEos and 2 inLabs.

3. A built in compatible 25pin ECP/ ECC parallel printer port is required. If the computer does not have this type of port, the computer cannot be used to control the CEREC inLab milling unit.

4. Bios version must be the same to insure compatibility

Updated March 2007 JKole FW

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download