MATERIAL SAFETY DATA SHEET - Sante Manufacturing



MATERIAL SAFETY DATA SHEET

Sante Manufacturing Inc. May be used to comply with OSHA's

2773 Thamesgate Dr. Hazard Communication Standard

Mississauga, Ontario L4T 1G5 29CFR 1910.1200. Standard

(715)804-4159 must be consulted for specific

(800) 424-9300 - Chemtrec requirements.

SECTION I IDENTIFICATION

Trade Name: Spa Cream Soap

Product Code: SM - HO009

U.S. D.O.T. Shipping Name: Non Regulated

Technical Name: Not Applicable

U.S. D.O.T. Primary Hazard Class: Non Regulated

U.S. D.O.T. Secondary Hazard Class: Not Applicable

Identification Number: Not Applicable

IATA (Airline) Non Regulated

Maritime Non Regulated

Packing Group: Not Applicable

SECTION II HAZARDOUS INGREDIENTS--IDENTITY INFORMATION

Components are considered to be non-hazardous as per OSHA 29 CFR 1910.1200.

SECTION III Typical PHYSICAL & CHEMICAL CHARACTERISTICS

Boiling Point: >100ºC

Flash Point: No Flash ASTM D-56 Tag Closed Cup

Vapor Density (Air=1): Greater than 1

Evaporation Rate (BA=1): Slower than Butyl Acetate

Solubility in Water: Complete

pH: 5.5 – 7.5

Appearance & Odor: Light cream colored pearl with floral fragrance

Viscosity: 1100 – 1700 cps

Note: Not all these tests are conducted routinely; it is recommended that you conduct your own.

SECTION IV FIRE & EXPLOSION HAZARD DATA

Extinguishing Media: Not combustible.

Special Fire Fighting Procedures: Always use Self Contained Breathing Apparatus.

Unusual Fire & Explosion Hazards: None known.

SECTION V REACTIVITY DATA

Stability: Stable.

Conditions to Avoid: Strong oxidizers, acids, and caustics.

Hazardous Decomposition Products: None known.

Hazardous Polymerization: Will not occur.

SECTION VI HEALTH HAZARD DATA

SIGNS AND SYMPTOMS OF EXPOSURE:

Eyes: Causes eye irritation on direct contact.

Dermal: May cause skin irritation on prolonged or repeated contact.

Inhalation: None known.

Ingestion: May be harmful if swallowed in large quantites.

EMERGENCY AND FIRST AID PROCEDURES:

Eyes: Flush with large amounts of water for 15 minutes.

Dermal: Flush with large amounts of water for 15 minutes.

Inhalation: Not applicable

Ingestion: Drink 1-2 glasses of water. Get medical attention. Do not give anything by mouth to unconscious person.

Acute Health Hazards: Irritation of eyes.

Chronic Health Hazards: None expected on industrial level.

SECTION VII SPILL OR LEAK PROCEDURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:

Absorb free liquid with earth, sand, clay, or absorbent pads. Wash area down with water. Rinse thoroughly. Can be slippery.

WASTE DISPOSAL METHOD:

In accordance with State and Local laws.

SECTION VIII SPECIAL PROTECTION INFORMATION

Respiratory Protection: None required.

Ventilation: Adequate to meet established minimums.

Protective Gloves: Vinyl or rubber.

Eye Protection: Safety glasses.

Other: As needed.

Hygienic Practices: Always wash face and hands before eating.

SECTION IX NOTES

The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. Vendor assumes no responsibility for injury to vendee or third person proximately caused by the material if reasonable safety procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety procedures are followed. Furthermore, vendee assumes the risk in the use of this material.

Revised date: Thursday, May 05, 2011

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download