STATISTICAL SAMPLING - United States Army
Performance Requirements Summary SERVICE PWS PARAGRAPH NUMBER STANDARD ACCEPTABLE QUALITY LEVEL SURVEILLANCE METHOD % of Service To Total Contract Price Acceptable surveillance methods include: 100 Percent Inspection: With this method, performance is inspected/evaluated at each occurrence. This method is often costly but can be necessary due to health, safety and other considerations. Random Sampling: Random sampling works best when the number of instances of the services being performed is very large and a statistically valid sample can be obtained. (web link to ANSI/ASQZ1.4LVLII) Periodic Inspection: This method, sometimes called “planned sampling,” consists planned sampling at specific dates or time intervals. It may be appropriate for tasks that occur infrequently, and where 100 percent inspection or random testing is not desired. Customer Input: Although usually not a primary method, this is a valuable supplement to more systematic methods. For example, in a case where random sampling indicates unsatisfactory service, customer complaints can be used as substantiating evidence. In certain situations where customers can be relied upon to complain consistently when the quality of performance is poor, e.g., dining facilities, building services, customer surveys and customer complaints may be a primary surveillance method, and customer satisfaction an appropriate performance standard. In all cases, complaints should be documented, preferably on a standard form. STATISTICAL SAMPLING Since the cancellation MIL-STD-105E, the availability of statistically sound, sampling tables to personnel performing in-process and end item product audits has been scarce. Most people performing these audits today are still using tables from this canceled document, or use Contractor's Sampling Tables. The table below is approved for use by DCMA QA personnel performing zerobased sampling. If no AQL is contractually specified, an AQL of 1.0% is suggested. ZERO-BASED ACCEPTANCE SAMPLING PLAN "A Indicates that the Entire Lot Must be Inspected" Acceptable Quality Level (AQL) LOT SIZE .010% .015% .025% .040% .065% .10% .15% .25% .40% .65% 1.0% 1.5% 2.5% 4.0% 6.5% 10.0% 1-8 A A A A A A A A A A A A 5 3 2 2 9-15 A A A A A A A A A A 13 8 5 3 2 2 16-25 A A A A A A A A A 20 13 8 5 3 3 2 26-50 A A A A A A A A 32 20 13 8 5 5 5 2 51-90 A A A A A A 80 50 32 20 13 8 7 6 5 4 91-150 A A A A A 125 80 50 32 20 13 12 11 7 6 5 151-280 A A A A 200 125 80 50 32 20 20 19 13 10 7 6 281-500 A A A 315 200 125 80 50 48 47 29 21 16 11 9 7 903986-13787501-1200 A 800 500 315 200 125 80 75 73 47 34 27 19 15 11 8 1201-3200 1250 800 500 315 200 125 120 116 73 53 42 35 23 18 13 9 3201-10,000 1250 800 500 315 200 192 189 116 86 68 50 38 29 22 15 9 10,001-35,000 1250 800 500 315 300 294 189 135 108 77 60 46 35 29 15 9 903986-1378735,001-150,000 1250 800 500 490 476 294 218 170 123 96 74 56 40 29 15 9 150,001-500,000 1250 800 750 715 476 345 270 200 156 119 90 64 40 29 15 9 500,001 & Over 1250 1200 1112 715 556 435 303 244 189 143 102 64 40 29 15 9 Other Available Sources - There are some documents that are currently available that can be used that contain certified statistically sound sampling tables. ZERO ACCEPTANCE NUMBER SAMPLING PLANS fith edition by Nicholas L. Squeglia. ( provides many useful tools for the Quality toolbox. Must be a member to enjoy the discounts.) This revised edition emphasizes the use of the updated military standard, MIL-STD-105E, as a guide in developing inspection strategies. A small lot sampling plan has also been added. These plans have found wide use in many industries where lot-by-lot attribute sampling exists, regardless of product.. This document is made available by ASQC, Quality Press, 611 East Wisconsin Avenue, Milwaukee, Wisconsin 53202. (About 44.00 for nonmembers, 26.00for Members) MIL-STD-1916, DoD PREFERRED SAMPLING PLANS FOR ACCEPTANCE OF PRODUCT This document contains a set of statistically sound sampling plans and procedures for planning and conducting the inspection of product to assess quality and provide information of conformance to contract requirements. This new military standard complies with the Department of Defense policy of eliminating acceptable quality levels (AQLs) and associated practices. The standard is currently available, however, the handbook addressing this standard and providing clarification is still being written. Also, some of these plan may be too stringent to use, based on contract requirements. 3. Electronic Industries Association (EIA) Standard, ZERO ACCEPTANCE NUMBER SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES BY A CONTINUOUS MANUFACTURING PROCESS Since conventional attribute sampling plans based on nonzero acceptance are no longer desirable, this industry standard places an emphasis on zero based sampling plans as they relate to Lot Tolerance Percent Defective (LTPD) value or the limiting quality protection of MIL-STD-105. The OC curves of this document are for the most part equal to or better than their associated MIL-STD-105 curves. Published by Electronic Industries Association, Engineering Department, 2001 Pennsylvania Ave. N.W., Washington, D.C. 20006. EIA Standard Sales Dept (202/457-4966). Remember, in order to use the Contractor's sampling plan, that plan shall afford the government equal or better protection that the requirements of the contract specifies. ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- california department of mental health
- a student s guide to interpreting spss output for
- 1600 9th street room 410 sacramento ca 95814
- a division of managed resources
- rat stats and sampling
- population and sampling specifications
- a simple chart review answer the question can help
- designing a statistically sound sampling plan
- mil
- statistical sampling united states army
Related searches
- united states army airborne requirements
- united states army airborne school
- statistical sampling calculator
- united states army airborne divisions
- statistical sampling plan calculator
- statistical sampling methods pdf
- examples of statistical sampling technique
- united states army ranks
- united states army aviation museum
- united states army sqi list
- united states army advanced airborne school
- united states army flag