Surf’s up - Riley Blake Designs

Surf's up

Surf's up

FINISHED QUILT SIZE 66" x 74" Measurements include ?" seam allowance. Sew with right sides together unless otherwise stated.

Please check our website for any revisions before starting this project. This pattern requires a basic knowledge of quilting technique and terminology. The quilt and block diagrams portrayed are virtual images. The layout and look of your project may differ when using actual fabric.

FABRIC REQUIREMENTS 3 yard (2.75 m) Clean White (C100-01) 1/2 yard (30cm) Hot Pink Wave (C415-70) 1/2 yard (30cm) Lime Wave (C415-32) 1/2 yard (30cm) Aqua Wave (C415-20) 1 1/4 yard (1.15 m) Aqua (C100-30) 1 yard (95 cm) Hot Pink (C100-85) 1/2 yard (30cm) Lime (C100-47) 1/3 yard (15cm) Daffodil (C100-64) Binding 5/8 yard (60 cm) Backing 3 3/4 yards (3.45 m)

CUTTING REQUIREMENTS Please read instructions first before cutting. Seam allowances vary so measure through the center of the quilt before cutting border pieces.

Clean White Cut 2 pieces 1 ? yards each.

Aqua, Hot Pink and Lime Wave Cut 1 rectangle 13" X 39".

Border 1 From the Daffodil. Cut 7 strips 1 ?" X WOF.

Border 2 From Hot Pink. Cut 7 strips 2 ?" X WOF.

Border 3 From the Aqua. Cut 7 strips 3 ?" X WOF.

QUILT ASSEMBLY Refer to the quilt photo for placement of fabrics.

Quilt Center Sew the 2 clean white solid rectangles together and trim to create the 54" X 62" center. Place the templates on each end of the Hot Pink Wave, Aqua Wave and the Lime Wave and trim to create the surfboards. Diagram 1.

Place the surfboards on top of the solid Aqua, Hot Pink and Lime solids and trim to 1" outside the surfboard. Stitch down.

Fold the Clean White piece in thirds and press these lines. Center the surfboards on these lines and stitch down using your favorite method of applique, and referring to the quilt photo for placement. Add the Surf's Up lettering and the flowers.

Borders Seam allowances vary so measure through the center of the quilt before cutting border pieces. Sew border strips together end to end if necessary to get the length needed. Sew side borders first.

Border 1 Top and bottom borders should be 54 ?". Side borders should be 64 ?".

Border 2 Top and bottom borders should be 56 ?". Side borders should be 68 ?".

Border 3 Top and bottom borders should be 60 ?". Side borders should be 74 ?"

Finish quilt by layering the quilt top, batting, and back. Bind with your favorite Riley Blake fabric from the Basics Collection. Have fun with your colors and enjoy the journey of making your quilt.

?2014 Riley Blake Designs

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download