Benefit Service Date Calculation and Reports
Overview
The State of Connecticut maintains employee Benefit Service Date to capture when an employee’s vacation leave accrual is increased for bargaining units. The calculation of Benefit Service is determined by the bargaining rules and is based on a number of factors, including union code, full-/part-time service, standard work hours versus hours employee actually worked, action/reason combinations in Job Data and time reporting codes used on the Timesheet. Benefit Service date will be captured in Core-CT on the Employment Data page of Job Data within the field entitled Benefit Service Date. Because this date is maintained on Job Data, agencies are able to maintain a separate unique Benefit Service Date for each job that an employee holds concurrently, if necessary.
Benefit Service Date Calculation Program
The Benefit Service Date Calculation program will process on a bi-weekly basis on each payroll-confirm day for the pay period. This process will re-calculate the Benefit Service Date for employees in specific bargaining units based on the criteria established in their bargaining unit contract, as well as on various events that have occurred during the pay period that may affect the date. These events include those actions occurring on the Job Data and Timesheet pages that affect the Benefit Service date. In Job Data, only the Action code of Leave of Absence – and its various Action Reason combinations – affects this date by deducting the period of applicable leave from the Benefit Service date. All other actions that affect the date are accounted for within the Timesheet page, where a number of Time Reporting Codes are configured to reduce the amount of benefit service time. Once the program determines that an employee has experienced any of these events, the Benefit Service Date field is updated by the system.
It is important to note that any adjustment to paid time (either on the Timesheet in previously processed pay periods, in Adjust Paid Time or in Additional Pay) WILL NOT affect this date, nor will the action appear on the Exception Report. Also, any retroactive leave of absence entries in Job Data entered after the processed time WILL NOT affect this date. Users must manually correct the Benefit Service Date whenever these adjustments occur.
Core-CT has been configured to handle most of the rules that are found within each bargaining unit for the purpose of calculating the Benefit Service Date. At the time of conversion, labor units 1, 2, 3, and 5 through 16 and 18 were configured. Agencies with other bargaining units were approached regarding the configuration of these rules, and while many of them were configured, still many more chose not to participate in the Benefit Service Date process. Those bargaining units that have been configured for Benefit Service Date calculation in Core-CT include the following:
Bargaining Units Configured in Core-CT for Benefit Service Date Calculation:
|BU | |
|CODE |DESCRIPTION |
| 01 |Exempt/Elected/Appointed |
| 02 |Managerial Exclusions |
| 03 |Confidential Exclusions |
| 05 |NP-1: State Police (Full time only) |
| 06 |NP-2: Maintenance and Service |
| 07 |NP-3: Administrative Clerical (Full Time only) |
| 08 |NP-4: Corrections |
| 09 |NP-5: Protective Services |
| 10 |NP-6: Paraprofessional Health Care |
| 11 |P-1: Professional Health Care |
| 12 |P-2: Social and Human Services |
| 13 |P-3A: Education Administrators |
| 14 |P-3B: Education Professions |
| 15 |P-4: Engineer,Scientific,Technical |
| 16 |P-5: Administrative & Residual |
| 18 |State Voc-Tech School Admin.(Full time only) |
| 24 |CT Housing and Finance Auth (Part time only) |
| 42 |Judicial Professional |
| 43 |Judicial Non-Professional |
| 53 |CJ Non-Mgmt Exempts (Full time only) |
| 54 |Conn Assoc Prosecutors (Full time only) |
| 56 |Conn Development Authority |
| 57 |Criminal Justice Residual (Full time only) |
| 62 |Connecticut Innovations Inc (Part time only) |
| 64 |Conn Lottery Exclusion |
| 67 |NP-8: Correctional Supervisors (Full time only) |
| 70 |CJ Managerial Exempt (Full time only) |
| 72 |DPDS Public Defenders (Full time only) |
| 73 |DPDS Chief Public Defenders |
| 74 |CJ Inspectors (Full time only) |
| 75 |DPDS Exempt |
| 76 |DPDS Executive PDs |
| 77 |Auditors of Public Accounts (Full time only) |
Benefit Service Date Exception Report
As a result of the bi-weekly Benefit Service Date Calculation process, two reports are generated to the “My Reports” section for all Agency HR Specialists. The first report – CTTLB363(2): Update Service Date Processed– is generated by Core-CT and reviewed for accuracy by agencies. This report lists all employees by departments who have had their Benefit Service Date updated as a result of the bi-weekly date calculation process. In addition, a second report – CTTLB363 (3): Update Service Date Exceptions – is generated by Core-CT and must be reviewed for action by agencies. This report lists all employees by department for whom the Benefit Service Date was not updated for a variety of reasons. Typically, the process did not have enough information to calculate the Benefit Service Date for a given pay period. For example, an employee who is Rehired into a union which counts the employee’s total state service for their length of seniority would appear on this exception report because all of an employee’s length of service may not be converted in Core-CT (employed prior to 10/17/2003). A total of 11 exception reasons alert agencies to the program’s inability to update an employee’s Benefit Service Date, requiring a manual review and update. All exception codes, which also appear on the report itself, are as follows:
Exception Codes Appearing on Benefit Service Exception Reports:
• Employee was rehired. New Service Date must be manually calculated.
• Employee has multiple jobs. New Service Date must be manually calculated.
• Employee was rehired from legacy system. Please evaluate Service Date.
• Employee is on unpaid leave of absence due to Temporary Service in a Higher Class during or as of pay end date. (*Removed June 2019)
• Employee temporarily serving or served in a position in a higher class as of pay end date.
• FT employee has LOA contributing to aggregate limit. No time deducted by program. Evaluate Service Date.
• FT employee has TRC contributing to aggregate limit. No time deducted by program. Evaluate Service Date.
• Employee switched from part time to full time or full time to part time between the pay begin dt and end dt.
• Employee has switched bargaining units. Please evaluate Service Date.
• Employees who have Retro Job data change ARE processed AND written to Exception report for manual review.
• PT employee on leave of absence will not be processed but written to exception report for manual processing.
• PT employee on workers comp will be processed but written to exception report for manual review.
Exceptions that Will Not Appear on Benefit Service Exception Report:
• War Service must be manually added to an employee’s Benefit Service Date, if applicable.
• All retroactive adjustments to Job Data or Timesheet.
• Entries on Adjust Paid Time or Additional Pay.
• Limited Scope Agency Employees.
• Bargaining Unit employees that do not have Benefit Service Rules configured.
These types of employee situations must be handled separately by the agencies. Agencies must be cautious when adjusting an employee’s Benefit Service Date that they are doing so according to the processing schedule below.
System Update Schedule of the Benefit Service Date
As indicated previously, the Benefit Service Date calculation program will run on a bi-weekly basis on each payroll-confirm day for the pay period. The Benefit Service field in Employment Data is updated according to the schedule provided in the HR Calendar located at:
For a calendar of the payroll confirm dates see the job aid for Leave Accrual Calendar located at:
System Update of the Benefit Service Date
This section is to assist users in understanding how the system reviews and processes the information for the Benefit Service Date. Please note the difference in the formula when using Job Data and Timesheet. Job Data uses action/action reasons from one calendar date to another and Timesheet uses Time Reporter Codes (TRCs) which counts the individual hours to deduct.
Full Time Employees:
For full time employees, the process assumes that they have worked for all of the given time period, minus any appropriate Leaves of Absence in Job Data and/or unpaid Time Reporting Codes on the Timesheet.
Scenario 1 – Job Data:
Full time employee. NO adjustments for the time period 08/18/2006 through 08/31/2006,
Union code = 15, Service Type = Total length of service, Original Benefit Service date = 12/3/1994, Standard weekly hours = 7.
New Benefit Service date = 12/3/1994 (NO change has occurred.)
Scenario 2 – Job Data:
Full time employee. Leave of Absence adjustment for the time period 08/18/2006 through 08/31/2006:
Effective Date Action/Action Reason Action Date
8/21/2006 LOA/SUS 8/22/2006
8/26/2006 RFL/RLV 8/28/2006
Union code = 11, Service Type = Continuous State Service, Original Benefit Service date = 04/11/2000, Standard weekly hours = 7, SUS = Suspension days are all deducted from Union Code 11 for Benefit Service Date.
Number of Days between 8/21/2006 and 8/26/2006 is 5 days.
Number of days to adjust Benefit Service date is 5 days.
New Benefit Service date = Original Benefit Service date + 5 days
New Benefit Service date = 04/11/2000 + 5 days = 04/16/2000
Scenario 3 - Timesheet:
Full time employee. Time Reporting Code deduction for the period 08/18/2006 through 08/31/2006: TRC = ULU, Union code = 10, Service Type = Continuous State Service, Original Benefit Service date =11/24/1987, Standard weekly hours = 7.
08/18/2006, 7.00 hours ULU
08/19/2006, 1.00 hour ULU
Converted Days = ULU hrs/ Standard hours
8 / 7 = 1.142857 Converted days
Adjustment Days = Converted days x 1.4
1.142857 x 1.4 = 1.6 Adjustment Days = 2 Days (round up for .5 and greater)
Number of days to adjust seniority date is 2 days.
New Benefit Service date = Original Benefit Service date + 2 days
New Benefit Service date = 11/24/1987 + 2 days = 11/26/1987
Part Time Employees:
For part time employees, the process assumes that they have NOT worked for all of the given time period, and determines the amount of time worked. The adjustment amount is the total number of days in the pay period minus the number of days worked.
Scenario 4 - Timesheet:
Part time employee. For the period 08/18/2006 through 08/31/2006:
Union code = 16, Service Type = Total State Service, Original Benefit Service date =05/10/2001
Standard working hours = 8.
Total part-time hours worked for the period 08/18/2006 through 08/31/2006
• Week 1 (08/18/2006-08/24/2006) ; Hours worked = 21 hrs
• Week 2 (08/25/2006-08/31/2006) ; Hours worked = 35 hrs
Total hours worked = 21 + 35 = 56 hrs worked
Total PT days = (total PT hours/Standard hrs) x 1.4
Total PT days worked = (56 / 8) x 1.4 = 9.8 part time days worked
Days in the pay period: 14 days
Days not counted for Benefit Service = (Days in the pay period) – (pt days worked)
Days not counted for Benefit Service = (14) – (9.8) = 4.2
Number of days to adjust Benefit Service date is 4 days. (4.2 rounded)
New Benefit Service date = Original Benefit Service date + 4 days
New Benefit Service date = 05/10/2001+ 4 days = 05/14/2001
Manual Update of the Benefit Service Date
Agencies must retrieve the CTTLB363-Update Service Date Exception report on a bi-weekly basis located in “My Reports” to determine any manual adjustments which need to occur in order for the date to accurately reflect an employee’s benefit service date. Careful attention should be paid to determine whether time should be added or deducted from this date as a result of any events occurring that the system could not automatically process. For instance, if an employee has been rehired in a given pay period, the system will not calculate a benefit service date since it does not know how much – if any – previous time served with the state should apply. The employee’s name will appear on the Exception Report with an exception reason of "Employee was Rehired. New Service Date must be manually calculated” and the agency must perform an off-line calculation of the amount of benefit service time that the employee has attained as of the end of that pay period. Once the correct amount of benefit service time has been determined, the agency must then convert that time into a date (see calculation rules below).
Attention should also be paid to the timing of when an agency updates the date. For this rehired example, the employee appears on the Exception report for the pay period end date of October 12, 2006 (report would be viewable on October 20, 2006). However, an agency is not able to make the adjustments until November 06, 2006. At this point in time, the system had not processed the employee adjustment for the pay period ending October 12, 2006, but no exceptions existed for the pay period ending October 26, 2006 and the system did process that pay period, using the original date as its starting point. The time would not be accurate because the agency would need to review the employee’s record for both the pay period ending October 12, 2006 and October 26, 2006 adjustments (see System Update Schedule of the Benefit Service Date above).
Benefit Service Date Calculation
See DAS Administrative Memorandum 06-007 – Calculating Seniority – Re-issuance of Personnel Administrative Memorandum 91-4 for information relating to seniority calculation. (Seniority Date Calculation is the same formula used for the Benefit Service Date Calculation.)
Once the appropriate amount of benefit service (Years, Months and Days) is determined, a calculation is performed to arrive at a retroactive date that represents the total amount of service for the given as-of date. The amount of service is deducted from the as-of date, and it is this retroactive date that gets entered into the Benefit Service Date field on the Employment Data page. (In this example, employee was rehired on 09/29/2006 and had a previous total of creditable time for 4 years, 3 months and 29 days which needs to be adjusted into the Benefit Service Date field.)
As-of Date: 2006 09 29 or 09/29/2006
Credited Svc: - 04 03 28
Benefit Service Date: 2002 06 01 or 06/01/2002
The date of June 01, 2002 now represents the Benefit Service date for which the employee will get credit. The system will put the employee on the Exception report for pay period end date of October 12, 2006 because of Exception reason of "Employee was Rehired. New Service Date must be manually calculated” and an agency will need to manually review for the pay period ending October 12, 2006 to verify if the employee should receive credit for the period of time. If the employee worked the remaining period of time then the date should stay as June 01, 2002 and is entered into the Benefit Service Date field.
Viewing Years, Months and Days Display on Employment Data page
When reviewing the Benefit Service Date field in Employment Data be aware that even though the field is updated every pay period by the system, the years, months, and days displayed is based on real-time (as of close of business the previous day), with the assumption there has been no deduction from the last system update to present.
Updating the Benefit Service Date
Once the Update Benefit Exception Report is reviewed and agencies have identified a need to manually update employees’ Benefit Service Date, the following action should be taken in order to update the field:
• Log in as Agency HR Specialist.
• Navigate to Core-CT HRMS >Workforce Administration>Job Information>Job Data
1. Search for the Employee ID in the Empl ID field
2. Tab to the employee’s Employment Data page – DO NOT ADD A ROW
3. In the Instance Record table, check the Benefits Service Date Override check box (if not already checked)
4. Populate the Benefit Service Date field with the correct date
5. [pic]the record
There is no need to add a row to Job Data in order to update this field because Employment Data does not have effective-dated rows. However, if you wish to capture how the calculation was derived, enter the information into General Comments by navigating to: Core-CT HRMS >Workforce Administration>Personal Information>Biographical>General Comments
Benefit Service Date Report
There is not a delivered process to manually run a Benefit Service Date report (as is delivered for the Layoff Seniority Date field – CT Seniority Report). In order to get a listing of this information, it must be retrieved from EPM.
-----------------------
[pic]
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- erb tutorial
- m21 4 chapter 2
- adjusting department of veterans affairs va benefits
- chapter 7 recertification
- benefit service date calculation and reports
- exercise 8 1 x accumulate test score data using an array
- pso 6650 sentence calculation justice
- north dakota state university
- lesson plan study island
- longevity date calculation and reports
Related searches
- service manager responsibilities and duties
- service manager roles and responsibilities
- ratio formula calculation and answer
- service manager roles and responsibility
- adjusted service date calculator
- defined benefit plan calculation formula
- service desk kpi and metrics
- employee benefit service center
- employee benefit service inc
- us news and reports college
- employee benefit service provider portal
- free civil service test questions and answers