Denver Rope - Recovery / Tow Line Worksheet



For customer service and inquiries please call John 303-809-7274 or email john@. Please email the completed worksheet back to John of Denver Rope or can fax to 305-635-0530 attention Cari Valdes ? Denver Rope.

Denver Rope - Recovery / Tow Line Worksheet

? Working Load: For Commercial Recovery / Towing Applications the W.L. is chosen to be equal to the fully loaded weight of the towed vehicle as a minimum. For light duty applications the W.L. is often chosen to be 1/3 ? 1/2 the fully loaded weight of the towed vehicle.

? Denver Rope is always concerned as not to exceed a customer's budget. However, the Owner is legally responsible for the safety of his passengers and equipment; therefore, it is always better to error on the conservative side when specifying a Recovery / Tow Line.

? Please fill out this worksheet the best you can and return to Denver Rope. Thank you.

Please describe below your towing vehicle and the towed vehicle. Include weight, location, etc. ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________

Please describe below what you are specifying on this worksheet; Recovery Line / Tow Line, other. ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________

B1. Bitter End

A. Rope

B2. Select A Spliced Working End Connection From Below

B2.1 Hard Eye B2.2 Soft Eye/Loop B2.3 Hook Options B2.4 Shackle

C1. Bitter End

C2. Select A Spliced Working End Connection From Below

C2.1 Hard Eye C2.2 Soft Eye/Loop C2.3 Hook Options C2.4 Shackle

A. Specify Rope Material

1. Choose from below

____________ (customer specified from list below)

a. Double Braid Nylon

____________ (y/n ? standard)

b. 3-Strand Twisted Nylon ____________ (y/n ? standard)

c. 12-Strand Dyneema

____________ (y/n ? inquire)

d. other material

____________ (y/n ? specify below and inquire)

__________________________________________________________________

2. Specify Length

____________ (50ft is typical ? customer specified)

3. Specify Diameter

____________ (*Denver Rope Strength Guide*)

4. Specify Color

____________ (white is standard, for other colors inquire)

*DR will assist the customer in selecting the diameter of rope and hardware that matches the

W.L. of the line.

B1. Bitter End 1. Bitter End 2. Finishing Options

a. Taped & Cut b. Melted / Sealed c. Heat Shrink d. Whipping

(Specify a Bitter End) ____________ (y/n ? standard) ____________ (y/n ? customer specified below) ____________ (y/n ? standard) ____________ (y/n ? end cut fibers are melted and sealed) ____________ (y/n ? black heat shrink covers the end cut) ____________ (y/n ? bitter end is whipped and sewn)

B2. Working End Connection 1. Heavy Duty Stainless Hard Eye

a. Wire Rope Thimble b. Tube Thimble 2. Soft Eye / Loop a. Eye Splice Size b. Chafe Guard 3. Hook a. Spliced Permanent b. Shipped Loose c. Hook Options 1. One 2. Two 3. Three 4. Four

(choose between 1 or 2 below) ____________ (y/n - standard) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified below) ____________ (6", 8", 10", 12", 18", 24" are typical) ____________ (y/n - covered eyes are recommended) ____________ (y/n - customer specified below) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified) ____________ (y/n ? choose from list below) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified)

4. Shackle (shipped loose) a. Galvanized b. Stainless

____________ (y/n ? customer specified below) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified)

C1. Bitter End 1. Bitter End 2. Finishing Options

a. Taped & Cut b. Melted / Sealed c. Heat Shrink

(Specify a Bitter End) ____________ (y/n ? standard) ____________ (y/n ? customer specified below) ____________ (y/n ? standard) ____________ (y/n ? end cut fibers are melted and sealed) ____________ (y/n ? black heat shrink covers the end cut)

 d. Whipping ____________ (y/n ? bitter end is whipped and sewn)

C2. Working End Connection 1. Heavy Duty Stainless Hard Eye

a. Wire Rope Thimble b. Tube Thimble

(choose between 1 or 2 below) ____________ (y/n - standard) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified)

2. Soft Eye / Loop a. Eye Splice Size b. Chafe Guard

3. Hook a. Spliced Permanent b. Shipped Loose c. Hook Options

1. One 2. Two 3. Three 4. Four

____________ (y/n ? customer specified below) ____________ (6", 8", 10", 12", 18", 24" are typical) ____________ (y/n - covered eyes are recommended) ____________ (y/n - customer specified below) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified) ____________ (y/n ? choose from list below) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified)

4. Shackle (shipped loose) a. Galvanized b. Stainless

____________ (y/n ? customer specified below) ____________ (y/n ? customer specified) ____________ (y/n ? customer specified)



For customer service and inquiries please call John 303-809-7274 or email john@. Please email the completed worksheet back to John of Denver Rope or can fax to 305-635-0530 attention Cari Valdes ? Denver Rope.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download