Camtasia Recorder User Document - TechSmith



Camtasia Recorder User Document

NOTE: This document has been derived from the Camtasia Recorder Online Help System. Therefore, sections and organization of information may not seem appropriate for a typical User Guide. This document is provided strictly in “As-Is” condition for user convenience and is not intended to represent a professionally-developed user guide.

Copyright ( 2001, 2001 TechSmith Corporation

Contents

Contents 3

Getting Started 7

Welcome to Camtasia Recorder Help 7

Getting Started 7

Installing Camtasia 7

System Requirements 8

Camtasia Performance 8

Performance Factors during Recording 8

Performance Results Tables 9

Performance Results Graphs 10

Performance Notes 11

Camtasia Player 13

Camtasia Recorder Overview 15

Video Capture Overview 15

Introduction 15

Uses of Camtasia Video 15

How Windows Video Works 15

Video Quality Tips 16

Quality Audio Recordings 17

Using Camtasia Recorder 19

Recording Video 19

Capture Options 19

Set Capture Input Options 19

Define a Fixed Region 20

Capture Menu > Record Options 20

Start a Recording 21

Pause a Recording 21

Stop a Recording 22

Delete a Recording 22

Capture Menu > Input Options 22

Capture Menu > Output Options 22

Capture Single Frames 23

Capture Menu > Quick Capture 23

Capture Automation 24

View Options 24

Program View Options 24

Toolbar View Options 25

View Menu > ScreenPad 25

Setting and Applying Effects 25

Overview 25

Annotation Effects 26

Effects > Settings > Annotation 26

Caption Options Dialog 27

Audio Effects 28

Effects > Settings > Audio 28

Cursor Effects 29

Effects > Settings > Cursor 29

Watermark Effects 30

Effects > Settings > Watermark 30

Zoom and Pan Effects 31

Effects > Settings > Zoom 31

Using ScreenDraw 33

Camtasia Recorder Toolbars 34

Annotation Toolbar 34

Audio Toolbar 34

Cursor Toolbar 34

Zoom Toolbar 35

Camtasia Recorder Menus 36

Options > Preferences > AVI 36

Options > Preferences > File 36

Audio Format Dialog 37

Time-lapse Capture Setup Dialog 38

Options > Preferences > Hotkeys 38

Advanced Hotkeys 39

Options > Preferences > Live 39

Live Output Feature Description 40

Options > Preferences > Program 40

ScreenPad Annotations 42

Using ScreenPad Annotations 42

Creating New Annotations in ScreenPad 42

Importing Background Images into ScreenPad 43

Editing Annotation Images 44

Editing Annotation Text 44

Image Editor Drawing Tools 45

Using ScreenPad Layouts 47

Creating and Saving Layouts 48

ScreenPad Layout Hotkeys 48

Distributing Movies 50

Distributing Your Movie 50

TechSmith Screen Capture Codec (TSCC) 50

Getting Help 52

Help Menu 52

Camtasia Capture Recovery Tool 52

Support (Help) 53

Camtasia Support 54

Legal and Miscellaneous 55

Software License Agreement 55

Acknowledgments 55

About TechSmith Corporation and Our Products 56

About DubIt 57

Panning the Video Capture Area 58

Interleave Audio and Video 58

Effects > Highlight and AutoHighlight 58

To Use the Highlight Feature 59

To Use the AutoHighlight Feature 59

Glossary 60

Index 65

Getting Started

Welcome to Camtasia Recorder Help

|[pic] |Camtasia™ is a screen camcorder and video production tool. Use Camtasia to |

| |record screen activity as videos, edit and narrate the clips, and publish the|

| |finished presentation in standard formats. |

Develop videos that introduce new software, train new users of existing software, or create any kind of active documentation. Distribute the videos as standard AVI files or as streaming presentations from a website.

Camtasia includes all the tools you need to record and produce your videos. Camtasia Recorder is a desktop camcorder that captures screen activity and applies real-time effects. You can also add annotations and watermarks to recordings. Recorder can also act as a software camera feed to live productions (for example, broadcasting the computer desktop in a live "webcast" using a streaming media encoder).

Camtasia Producer is a non-linear editor producing standard AVI files or streaming formats. See also Camtasia Producer Help for instructions on that program.

Use this tool to record and present program action to be used in many creative ways: training videos, multimedia projects, demonstrations of all types, and recording abnormal events for support and testing purposes. The standard Windows Media Player, RealNetworks RealPlayer, or any AVI player (such as TechSmith’s Camtasia Player) can be used to view the captured files.

• If you have not installed Camtasia yet, go to Installing Camtasia.

• If you want to start right away, go directly to Getting Started.

• If you are unfamiliar with video capturing on computers, you can get background information in the Video Capture Overview.

Getting Started

RecordYou can start recording with Camtasia Recorder very easily: Just set the input type using the Capture > Input menu options, click the red record button, select the area you want to record.

Note: Alternatives to using the record button: press the Record/Pause hotkey F9 (which can be changed using the Options > Preferences > Hotkeys tab). You can also make the menu selection Capture > Record.

When you are ready to stop recording, click the square black stop button, name and save the file. The player starts automatically.

See also: Recording Video.

Installing Camtasia

CD-ROM SETUP.EXE Installing Camtasia Insert Insert:Camtasia CD-ROM Camtasia SetupThe installation program SETUP.EXE installs both Camtasia Recorder and Camtasia Producer, two related programs you will be using together. See System Requirements before installing Camtasia.

1 Start Windows, if you haven't already done so.

2 Insert the Camtasia CD-ROM into the CD-ROM drive. Camtasia Setup should start automatically when you close the drive.

3 If the setup program does not automatically start, or if you have Camtasia on a diskette, perform the remaining steps.

4 Find the program named setup.exe, either on the CD or diskette. Double-click it. Camtasia Setup starts.

5 Follow the instructions given by the setup wizard for correct installation of the product.

System Requirements

To run Camtasia Recorder, your system must meet these specifications:

• Microsoft Windows 95 OSR2, 98, Me, NT 4.0, 2000 or later version.

• 90 MHz processor (400 MHz recommended).

• 16 MB RAM (64 MB recommended).

• Windows-compatible sound card and microphone (recommended).

• 12 MB of hard-disk space for program installation.

Performance Notes

Camtasia Performance

Performance Factors during Recording

800x600:capturing Camtasia Recorder 800x600Camtasia Recorder program performance is directly dependent on the speed of your computer. To help give you some guidelines and influence your choices of capture size, color depth, and codec, we performed some basic speed calculations using Camtasia Recorder on a standard Windows PC:

• Pentium III 500MHz

• Diamond Riva 128 Graphics Card

• Microsoft Windows 98 (version 4.10.2222 A)

Some graphics cards and/or drivers have better 2D performance than others. Also, some graphics cards perform better at 32-bit color than at 16-bit color. So, you need to experiment with capturing at 16 vs. 24 vs. 32-bit color on your particular system. The following capture frame rates were measured on a Dell PIII 500MHz system capturing a 800x600 screen area with different graphics cards at different desktop color settings:

3dfx Voodoo 3 (color depth: frames/second)

• 8-bit: 21 fps

• 16-bit: 10 fps

• 24-bit: 7 fps

• 32-bit: 6 fps

S3 Savage 4

• 8-bit: 17 fps

• 16-bit: 7 fps

• 24-bit: N/A

• 32-bit: 4 fps

Diamond Viper V770 (uses the NVidia TNT2 chipset)

• 8-bit: 20 fps

• 16-bit: 6 fps

• 24-bit: N/A

• 32-bit: 22 fps

STB nVidia ZX 8MB (uses the NVidia Riva 128 chipset)

• 8-bit: 44 fps

• 16-bit: 30 fps

• 24-bit: N/A

• 32-bit: 20 fps

For results in tabular format for 3 capture sizes, 3 color depths, and 4 codecs, see also: Performance Results Tables.

For results in graphic format for 3 capture sizes, 3 color depths, and 4 codecs, see also: Performance Results Graphs.

Performance Results Tables

[pic]

[pic]

[pic]

Performance Results Graphs

[pic]

[pic]

[pic]

Performance Notes

Configuring Performance Improvement TIPS Configuring:Camtasia Recorder TSCCYour computer’s speed and capacity have an impact on the performance you can expect from Camtasia Recorder. A slow CPU may mean that the recorder appears to lag behind the actions you are trying to record.

IMPORTANT Note for Windows 2000 Users: See the first bullet under "Some Performance Improvement TIPS" below for information about improving possible slow performance when using Windows 2000.

The following factors may slow performance:

• Recording a movie that covers a large portion of your screen and encompasses a large number of pixels.

• Recording high color content.

• Recording a movie with a high frame rate.

• Running other applications during recording sessions.

Note: Apart from the program you are recording, you should shut down as many other Windows applications as possible to increase the available CPU capacity for Camtasia Recorder.

• Recording a movie with zoom effects.

Note: It is better to use the zoom as a "transition" effect rather than setting zoom IN or OUT for entire long clips.

For additional information, see also: Performance Factors during Recording.

How to Correct It

The remedy is to either reduce these elements in your movie to ease CPU demand or use a faster computer.

You can increase Recorder performance most dramatically by reducing the size of the area and reducing capture frame rates.

Configuring Camtasia Recorder

All video recorder preferences are set with the menus Options > Preferences and the AVI tab. Experiment with different settings to improve quality or performance of the video capture. For most captures, leaving the default selection under AVI Preferences (Auto Configure) will most likely achieve the best results. For more information, see also: Distributing Your Movie.

Some Performance Improvement TIPS

• Disable display acceleration during capture. This option, available on the Options > Preferences > Program tab is important for Windows 2000 users. The default setting is OFF. Disabling hardware display acceleration on Windows 2000 or later can dramatically increase frame rates and/or reduce system load during recording.

Note: When display acceleration is disabled, your screen will momentarily blank at the start and end of recording. This is normal.

• Use the TSCC video codec during capture. The only exception is at 256 colors, for which you might try the MS-RLE codec which may be just slightly faster. By default, Camtasia Recorder has the Auto Configure option enabled in Options > Preferences > AVI. Auto Configure tries to determine automatically the highest frame rate that can be captured given the desktop color depth and movie dimensions that will use 75-95% of the CPU. First, try disabling Auto Configure and manually raise the capture frame rate. Try frame rates between 8 and 15 frames per second (fps).

• To get the best capture performance, disable Auto Configure as described above. Then, click the [Configure] button to configure the TSCC codec. Move the Compression Control slider all the way to the left (Faster Compression). This setting will hold whether you use Auto Configure or not. It tells the TSCC codec to compress as fast as possible rather than make as small an AVI file as possible.

• Use the Quick Capture feature to reduce the system load and improve the smoothness of mouse movements. For more information, see Capture Menu > Quick Capture.

• Desktop color depth. Lower color depths result in improved performance. Of course, some applications require at least 16-bit color. Note that some graphics cards perform better at 32-bit color than at 16-bit color (see the chart below). So, you may need to experiment capturing at various color depths on any particular system.

• Size of the capture area. The smaller the capture area, the better Recorder’s performance will be.

• CPU speed. The faster the computer, the better Recorder’s performance will be. This is the most important factor in capture performance when all of the other parameters are fixed.

• Graphics card. Some graphics cards and/or drivers have better performance than others. For information on graphic card performance, see also: Performance Factors during Recording.

• Hard disk speed. Always use the fastest local hard drive available for the Temporary File Folder set in Options > Preferences >Program.

• Reduce the system load during capture. Don't run any applications that you don't have to during capture.

• If you have tried every option and still have problems with capture performance, we suggest you contact technical support. See also: Camtasia Support.

Camtasia Player

Movies Selecting:Play Restart Full Screen Selecting Play AVI Restart:movie Player Movie viewingCamtasia Player comes bundled with the Camtasia product and is installed as the default AVI viewer for Recorder and Producer. You can easily include the player using Camtasia Producer’s Pack and Show feature. For more information, see also: Pack and Show Your Movie.

There are several benefits to using Camtasia Player:

• Provides reliable playback that you can control (for example, you can set it to exit after playing, or play full screen).

• Always plays back movies at 100 percent of their original size for best readability. This is important because scaling a movie view window distorts the image and makes it difficult to distinguish details.

• Camtasia Player is small and self-contained. It works on any 32-bit Windows platform, even Windows 95. There are no extraneous DLLs or DirectX components required.

Camtasia Player supports many command line options that allow complete control over the player when it is run from CD-ROMs, multimedia authoring tools, help files, and scripting languages or batch files. For more information, see the text file CamPlay.txt in the Camtasia installation folder.

Note: If you want to use your default Windows movie player instead, in Options > Preferences > Program, remove the checkmark for Play AVI files with Camtasia Player.

Camtasia Player is easy to use:

• Camtasia Player opens automatically whenever you play a movie in Recorder or Producer.

• You can open other AVI files using menu option File > Open.

• Camtasia Player is freely re-distributable for playing Camtasia-created content (see the text file CamPlayLicense.txt in the Camtasia installation folder for details about the software license agreement).

• Movie viewing is controlled both with the Play menu options and the VCR-like player controls on the toolbar. Using these controls, you can:

|Menu/Shortcut |Icon |Description |

|Play |[pic] |Plays the movie in the Player. (If you are playing a movie, the |

| | |Pause Icon is in view; if a movie is not currently playing, the |

| | |Play Icon is in view.) |

|Pause |[pic] |Pauses the movie in the Player. (If you are playing a movie, the |

| | |Pause Icon is in view; if a movie is not currently playing, the |

| | |Play Icon is in view.) Restart the movie by selecting Play. |

|Stop |[pic] |Stops the movie and re-cues to the beginning. |

| | | |

|Beginning |[pic] |Goes to the first frame of the movie in pause mode. |

| | | |

|Rewind |[pic] |Rewinds the movie a few frames at a time. Press the key |

| | |continuously to fast rewind. |

|Forward |[pic] |Moves the movie forward a few frames at a time. Press the key continuously to fast forward. |

|End |[pic] |Goes to the last frame of the movie in pause mode. |

| | | |

|Full Screen |None |Presents the movies in full-screen view. Since Player always shows |

| | |the movie at 100% size, a border surrounds the play window. |

|None |[pic] |Move the Slider Control to any position in the movie from beginning|

| | |to end. |

Camtasia Recorder Overview

Video Capture Overview

Introduction

There are many ways moving images impact our lives today. Anyone who has used a video camcorder knows the value of moving images compared to snapshots. And if you have gone to the movies lately, you can see the results of computer-enhanced moving images in animation and special effects. Imagine using some of this power on your own computer. We’re not promising to make you a movie mogul, but using Camtasia can dramatically change the way you interact with your computer.

Camtasia can capture the moving action on your computer screen and save it as a computer movie file. If you type text, move the cursor, click buttons, or select menus, Camtasia records an image of it that you can save and play back later. There are many creative ways you can use this capability.

Click [ >> ] above to continue reading the Overview.

Uses of Camtasia Video

World Wide Web Camtasia VideoHere are some of the ways people are making use of Camtasia videos:

• You can create Windows program demonstrations that show the movement of the cursor, selection of menus, program interactions (such as entering text or commands), and results. These demonstrations, when shown to users or potential users, can show the high points of program features and usage in a few seconds.

• Use Camtasia video to add motion to online help files. Complex procedures can be shown quickly using captured program operation sequences.

• Add audio to your videos through a microphone while capturing video from the screen. Or, you can dub the audio in later using the companion program, DubIt.

• You can create videos for use on the World Wide Web to enliven web sites. This can change a static web site to a more dynamic, dramatic one by including elements of multimedia. Any movement you can produce on your computer screen can be captured with Camtasia. This includes animated graphics from any program that runs on Windows. This is especially useful if the program you are using does not export to .AVI format.

• Output live desktop activity using Camtasia as your software "camera." This allows you to include desktop action in live "web cam" productions.

• Record program actions and reactions for any number of reasons. For example, you could record a sequence of actions to remind yourself later how to perform a certain task (or to show colleagues).

How Windows Video Works

Codec Windows Media Format McGowanThe Basics

When you make a video using Camtasia, you are actually saving a series of bitmap graphics, that, when shown rapidly in sequence, shows movement. The more frames per second (fps) you record, the smoother the motion. These captures are stored as AVI files. To learn more about computer-based motion video, see the following article on the World Wide Web:

AVI Overview, by John F. McGowan, Ph.D. at .

Video files can be placed in most any Windows program, including all Microsoft Office applications. The resulting file will show the video viewer where you pasted the AVI file. The viewer will be stopped on the first frame of the captured video. The user can view, pause, stop, replay, and exit the video by clicking the controls on the viewer. See the help file or documentation for the video viewer on your system for details on using the viewer.

Note: Virtually all Windows systems are shipped with a video viewer. When an AVI file is activated, this is the viewer that will show it if you have not installed another.

File Size

AVI file size tends to be quite large for long, detailed videos. AVIs over one megabyte are not uncommon. You can limit the size by:

• Using Camtasia Producer to select a streaming format for the video. A streaming codec such as Windows Media Format (WMV) reduces the size of the video file while maintaining most of the quality.

• Limiting the size of the application window being captured. Don’t bother including extraneous information in your video. HINT: You can use Camtasia’s Region Input selection to select a smaller area to capture and then "pan" across the screen while capturing, thereby making a much smaller video file. See also: Panning the Video Capture Area.

• Limiting the speed at which video frames are captured.

• Limiting the length of the video capture sequence. Camtasia captures video sequences in real-time seconds and minutes. The shorter your sequence, the smaller the resulting AVI file will be.

• Changing the compression technique. See also: Options > Preferences > AVI. By default, Camtasia chooses the best compression technique to use for your capture and system, but you may try experimenting with these settings.

Video Quality Tips

Codec General Suggestions TechSmith Screen CaptureGeneral Suggestions

• Use the appropriate Camtasia tool: make multiple short clips using Camtasia Recorder. Use Camtasia Producer to join those short clips together into a longer video production.

• You may find that you need to rehearse video capture sequences to get the best results.

• To practice, you can perform several "takes," replaying them after production to see ways of improving the video.

• For lengthy or involved sequences of action, you may want to write a script before recording. Think through the actions, in detail, you want to capture, then write them down in sequential steps.

• Record clips using high quality codec settings (for example, use the TechSmith Screen Capture Codec for lossless video compression, and use uncompressed PCM audio). Then use Camtasia Producer to produce a finished video with whatever final compression you need from the high quality lossless source clips recorded with Camtasia Recorder.

• If you are including voice-over audio, write your comments exactly as you want them and print the script in large type, to make it easy to read while recording. To eliminate the sound of paper shuffling, you can tape script pages together and hang them near the monitor so they are easy to read.

• Normal mouse and cursor movement can be jerky, hesitant, or too fast for the capture to pick up. The cursor appears to jump and the program reacts before the viewer can see where the mouse is. To eliminate some of these problems, practice the sequence slowly, then build up speed as you go.

Note: You can also improve cursor behavior using the "Quick Capture" feature. For more information, see Capture Menu > Quick Capture.

• When showing cursor movement, pause a fraction of a second over the element, then click. This will allow cursor position to be established in the video before the next action takes place.

• By viewing glitches and correcting them in succeeding takes, you will eventually come up with a professional-looking video sequence that you can save.

Quality Audio Recordings

Record Audio Quality Audio Recordings Noisy Recordings Audio Recording Failure Set Record Level Microsoft Windows Sound Recorder Silent RecordingsThis topic contains some hints to make better quality audio recordings.

1. Silent Recordings

First, make sure Camtasia is ready for audio. Click the microphone icon to turn it on. You can also enable audio recording with Effects > Record Audio.

If the audio you record from the microphone is silent, check that your microphone is plugged into the sound card in your computer. Make sure the connection is good. You can check to see if the microphone is working using either the standard Microsoft Windows Sound Recorder or another audio application.

2. Set Record Level

If the audio recordings are too low in volume, there may be a number of causes. Some of the most common:

a Recording level is too low. Check your computer and sound card’s recording level using Options > Preferences > AVI. Click the [Volume] button to view the Record Control dialog where you can set input volume.

b You are too far from the microphone. Try several recordings from different distances to determine the right one. You should probably be about six inches from the microphone: close enough to record full tones but not so close that plosives, sibilants, and other noises interfere.

c Speak distinctly. Remember, you are making a recording and need to enunciate sounds so that it sounds clearer on replay.

3. Noisy Recordings

Noisy recordings are usually caused by environmental elements. Sounds you may not have noticed in the past suddenly show up on your recordings. You can eliminate most problems by moving your recording "studio" to a quieter location.

Also, don’t forget that most computers make noise. The disk drives and fan are potential sources for low level hum in your recordings.

4. Low Quality, "Tinny" Sounding Recordings

Most consumer-quality recording equipment shipped with computers is fairly low quality (unless you have purchased higher-quality accessories). Don’t expect to be able to make studio-quality recordings on cheap equipment. To improve the quality of recordings, you can upgrade the components responsible for audio on your computer: microphone, sound card, and speakers.

The audio format you specify determines the quality of the movie audio track and also affects movie file size. Higher quality audio results in a larger movie file size.

5. Audio Recording Failure and Error Message

If there is an error message relating to audio recording, it might be due to another application using the sound card to play and/or record audio. Only one application can record audio at a time on your computer. Some computers with "Full Duplex" sound cards allow one application (for example, Camtasia) to record from the microphone, while another application plays sound. In this case, you can even hold the microphone up to your computer speakers and record what another application is playing. However, many computers do not have this capability and only allow recording when no other application is playing sound.

Using Camtasia Recorder

Recording Video

Camtasia Recorder Record video captures HotkeyThis procedure shows how to record video captures of computer screen activities once input options and output options have been set.

Note: The video capture process is started by clicking the red record button. Stop capturing by clicking the black stop button. There are menu and hotkey alternatives.

Follow these general steps:

1 Start Camtasia. If Camtasia is reduced to an icon in the system tray, double-click it to make it full-sized.

Note: You can position Camtasia Recorder to the side, away from the area of the screen you intend to record. You can also hide parts of the recorder screen using view options to show only the toolbar. Recorder also works while closed, but active in the System Tray. Place Camtasia in the System Tray by clicking the [pic] in the upper-right corner.

2 Set Capture > Input to the type of recording you want to make: Screen, Window, Region, Fixed Region. See also: Capture Menu > Input Options.

3 Click the red record button to start the process. At this point, Camtasia starts in paused mode. If you chose Fixed Region without a starting point, a rectangle appears for you to place the recording area on screen. Also, the status area shows statistics about the video you are about to record.

4 Click the red record button again to begin recording. A flashing outline shows the area being captured on video. (When paused, the outline does not flash.)

5 Step your way through the screen movements to be captured on video. (It is best to work from a script.)

6 Click the pause button on the toolbar to pause the video capture. If you want to restart, click the red record button again.

7 Click the black stop button to end the video capture session. The Save Movie File As Dialog appears and prompts you for a file name. Then the video viewer appears and shows the captured video.

Make as many takes and clips as needed for your project. When you are done recording, you can use Camtasia Producer to trim them, add audio, and export to the movie file type you want (AVI, WMV, or RM).

Capture Options

Set Capture Input Options

Set Capture Input OptionsYou should set Capture Input Options before recording. These options allow you to define the area and type of video capture.

1 First, click Capture > Input.

2 From the submenu, select your video capture input type (explained below).

|Screen |The entire computer screen is captured. You will not be able to select an area|

| |or region and the file size will be maximum. |

|Window |Before recording, you can select a window (or any portion of a window) to be |

|[pic] |captured. Camtasia allows you to indicate which one. The cursor changes to a |

| |finger-pointer and when you pass it over areas that can be selected and |

| |captured, they are highlighted. |

|Region |Before recording, you can define an arbitrary rectangular region with the |

|[pic] |mouse. The cursor turns to cross-hairs, which you use to draw a rectangular |

| |region on your screen. This will be the area captured. |

|Fixed Region… |You can capture a fixed-size rectangular region. Before recording, a dialog |

| |allows you to define the size of the region in pixels. You can add a fixed |

| |starting point as well. Define a Fixed Region. |

3 Set other options or perform the recording.

Define a Fixed Region

Fixed Region1 Click Capture > Input and select Fixed Region….

2 The Fixed Region dialog appears.

Note: If you use [Select] to set starting point and dimensions, the numbers are automatically placed in the appropriate boxes.

3 To set a starting point manually, click a checkmark in the Fixed starting point box.

4 Type the coordinates (in screen pixels) in the Start X and Start Y box.

Alternative: Click the [Select] button to define them with the cursor.

5 To set the Width and Height, type the pixel dimensions in the boxes provided.

Alternative: Click the [Select] button to define them with the cursor.

6 Click [OK] to accept the Fixed Region.

When you proceed with the capture process, you will see the area to be captured framed by green brackets.

Capture Menu > Record Options

The Camtasia Capture Menu has four recording options:

|Record |Begins the recording sequence. Same as pressing F9 on the keyboard or clicking the|

|[pic] |record button. |

| |Start a Recording. |

|Pause |Pauses the recording. Same as pressing F9 during recording or clicking the pause |

|[pic] |button. You can press F9 or the record button to resume. |

| |Pause a Recording. |

|Stop |Stops the recording so you can save the file. Same as pressing F10 or clicking the|

|[pic] |stop button. |

| |Stop a Recording. |

|Delete |Deletes the recording you just made. |

|[pic] |Delete a Recording. |

Start a Recording

Record Record/Pause hotkey Start:Recording Start1 There are three ways to start recording:

a Click the red record button [pic] on the standard toolbar.

b Select menu options Capture > Record.

c Press the default Record/Pause hotkey, F9 (if you change hotkeys using Options > Preferences > Hotkeys, use those).

2 Camtasia’s status area shows statistics about the recording you are about to make. Take a second to review them.

Note: To cancel recording, click the red "X" on the standard toolbar or select Capture > Delete.

3 Use any one of the record start options a second time to start actually recording. You’ll know you are recording because the green brackets in the corners showing the recording area begin to flash slowly (all inputs except Screen).

4 Perform the actions you want to record.

To stop recording and save the file, click the stop button [pic] on the standard toolbar, press the default Stop hotkey F10, or select Capture > Stop.

Pause a Recording

Record/Pause hotkey Recording Recording:Pause1 There are three ways to pause recording:

a Click the pause button [pic] on the standard toolbar.

b Select menu options Capture > Pause.

c Press the default Record/Pause hotkey, F9 (if you change hotkeys using Options > Preferences > Hotkeys, use those).

2 Camtasia’s status area shows statistics about the recording you are currently making. Take a second to review them.

Note: To cancel recording, click the red "X" on the standard toolbar or select Capture > Delete.

3 You can begin recording again by pressing the Record/Pause hotkey.

4 You can stop recording and save the video.

To stop recording, click the stop button [pic] on the standard toolbar, press the default Stop hotkey F10, or select Capture > Stop.

Stop a Recording

Recording:StopThis finishes and saves the current capture.

1 There are three ways to stop recording:

a Click the stop button [pic] on the standard toolbar.

b Press the default Stop hotkey F10.

c Select menu options Capture > Stop.

2 The Save Movie File As dialog opens for you to specify a filename (unless you specified automatic file naming using Options > Preferences > File Name).

The Media Player on your computer starts with the movie file loaded and may start automatically.

Delete a Recording

Recording:Delete RecordingThis cancels and discards the current capture.

1 During any recording, you can delete or cancel the process these ways:

a Click the red "X" on the standard toolbar.

b Select menu options Capture > Delete.

2 The capture pauses and you get a message asking if you are sure you want to delete the current video capture. If you answer Yes, the recording stops and any captured frames are discarded.

Capture Menu > Input Options

Region ScreenSet the input option you need for the recording you are going to make:

• If you choose Screen, the entire computer screen will be captured.

• If you choose Window, the cursor changes to a finger for the user to point to the parts of the window to be captured. Click over the window title bar to capture the whole window.

• If you choose Region, the cursor changes to a crosshair pointer for you to define the region of your computer screen to be captured in the video. This region is shown within green angles at each corner.

• If you choose Fixed Region, a dialog asks you to define the region in pixels. See also: Define a Fixed Region.

Capture Menu > Output Options

Live OutputThere are two possible output options:

• If you choose File, the captured video will be stored in an AVI (video) file. The name and location of the saved video file can be set under Options > Preferences, then choose the File tab. See also: Options > Preferences > File

• If you choose Live, the captured video will be made available to any live encoding process you have running on your computer. See also: Live Output Feature Description and Options > Preferences > Live.

Note: When Live Output is ON, all input options are disabled, since video frame size is determined by the application that is using Camtasia Recorder as a video source (for example, Windows Media Encoder or NetMeeting).

Capture Single Frames

Time-lapse Single Frames:Capture Time-lapse:settingThis is a capture option that makes Camtasia capture only one frame at a time. With this option selected, Camtasia is always in a paused state. Use the record button like a camera shutter button to capture one or more stills that can be saved as an AVI file.

1 Select menu options Capture > Single Frame. This is a toggle that you click ON by selecting the menu option once and OFF by selecting it again. When the option is ON, a check mark appears next to the menu option.

2 Set any other capture options, including Input, Effects, and Preferences.

3 To capture a frame, use any start recording method: red record button [pic], Record/Pause hotkey, or Capture > Record.

4 Repeat the capture as many times as needed. You can change the contents of the capture region between captures to achieve whatever motion effect you want.

HINT: Single Frame capture can be used to create a slide show or "stop frame animation" style movies. This option works well with the Time-lapse capture mode available under Options > Preferences > AVI > Time-lapse Capture Setup Dialog. For example, by setting the Time-lapse playback frame rate to 1 frame per 10 seconds, you can use Single Frame capture to add slides, each of which is displayed for 10 seconds.

For another useful periodic frame capture option, see also: Time-lapse Capture Setup Dialog.

Capture Menu > Quick Capture

Quick CaptureQuick Capture mode captures the screen as efficiently as possible, at frame rates from 2 to 7 times faster than normal. This option gives you two advantages:

• Given your system resources, you can obtain a higher capture rate for smoother, higher quality recordings.

• At any given frame rate you need to maintain, Quick Capture uses less system resources, possibly enabling you to capture scenes that you would otherwise not be able to with the computer and graphics capabilities you have.

This is particularly useful for capture sequences that feature a lot of cursor movement and not much other visual change. This allows better recording of cursor movement by not capturing static areas repeatedly. It may result in better, smoother cursor movement.

To Use Quick Capture:

1 Turn Quick Capture ON by clicking the menu option once. A checkmark is placed next to the menu option, indicating Quick Capture mode is ON.

2 Turn Quick Capture OFF by clicking the menu option again to remove the checkmark.

Note: The default setting is OFF.

Caution: Screen changes that are not user-initiated (like animations) may not be fully captured when using this option.

Capture Automation

Command Option CamRec.exe Starts/resumes Run Hidden Hides Hide/unhide Hides:RecorderThe following Camtasia Recorder command line options allow you to automate and/or control Recorder from other applications or a batch file.

|Command Option |Function |Description |

|/r |Start/ |Starts/resumes recording using the current Recorder |

| |Resume |settings. This option fails if Recorder is already |

| | |recording. |

|/p |Pause |Pause recording. This option fails if Recorder is not |

| | |running, or if Recorder is not recording. |

|/s |Stop |Stop recording. This option fails if Recorder is not |

| | |running, or if Recorder is not recording or paused. |

|/h |Run Hidden |Hides the Recorder screen and disables the hide/unhide tray |

| | |icon hotkey. This option always succeeds. |

|/x |Exit |Causes the running instance of Recorder to exit. This option|

| | |fails if Recorder is not running. If a recording session is |

| | |active, the /x option aborts the capture and discards any |

| | |video file. Note: You can safely perform a /s to stop |

| | |recording followed by a /x to cause Recorder to exit. |

| | |(Example: CamRec.exe /s/x). |

Note: When the command line options are used, Recorder exits with a exit code of 0 on success and 1 on any failure. The exit code is reflected as the "errorlevel" in DOS batch files.

View Options

Program View Options

View MenuThe Camtasia Recorder View Menu allows you to set the view of the program window you prefer and toolbar options. You can also customize how much screen "real estate" is used by Recorder so that it does not interfere with what you are recording.

Note: Each View Menu option is a toggle to either turn ON the view of the selected item or turn it OFF. When the view of the item is ON, there is a checkmark next to it on the menu.

• Click View > Standard to see the default Recorder view (menu bar at top, toolbar with program command buttons, and the view window.

• Click View > Compact to remove the view window (leaving only the menu bar and toolbar).

• Click View > Minimal to remove all except the toolbar.

|[pic] |Note: You can use the view icon on the toolbar to |

| |either restore the Standard view or to toggle among|

| |the three views. |

Toolbar View Options

Note: The following four view options can be selected individually; you may select none, one, two, three, or all four. A checkmark appears next to selected items.

• Click View > Annotation Toolbar to reveal or hide the Annotation Toolbar.

• Click View > Audio Toolbar to reveal or hide the Audio Toolbar.

• Click View > Cursor Toolbar to reveal or hide the Cursor Toolbar.

• Click View > Zoom Toolbar to reveal or hide the Zoom Toolbar.

View Menu > ScreenPad

ScreenPadClick View > ScreenPad to reveal or hide the ScreenPad. This feature allows you to use ScreenPad annotations in your captured video. For more information on using this feature, see also: Using ScreenPad Annotations.

Setting and Applying Effects

Overview

EffectsYou can set up or customize movie effects using the options under Effects > Settings on the Effects tabbed dialogs. Then, you can apply the effects using the Camtasia Recorder Effects menu.

For more information about setting movie effects, see also:

Effects > Settings > Annotation

Effects > Settings > Audio

Effects > Settings > Cursor

Effects > Settings > Watermark

Effects > Settings > Zoom

For more information about applying movie effects, see also:

Annotation Effects

Audio Effects

Cursor Effects

Zoom and Pan Effects

Annotation Effects

Effects AnnotationUsing Annotation Effects, you can include the time and date for a predefined period of time. You can also create a text option, such as a title, and customize its appearance and position on screen.

You can choose the following Annotation Effects:

Add Time/Date

Add Caption

Add Watermark

Highlight

AutoHighlight

For more information on Annotation Effects, see also:

Effects > Settings > Annotation

For a different method of applying annotations, see also:

Using ScreenPad Annotations

Effects > Settings > Annotation

Show Time/Date Annotation SettingsUse this tab to set options for video annotations. You can include the time and date for a predefined period of time. You can also create a text option, such as a title, and customize its appearance and position on screen.

Time/Date Section

• Show Time/Date for __ seconds - If selected, the time and date stamp will only be rendered for the specified time from the start of the capture. It automatically turns off after the time has elapsed.

• Click [Options…] to set up the appearance and position of the time and date annotation on the Caption Options Dialog.

Caption Section

Caption Textbox - You can specify a text string to be rendered into the movie. Either type a new one in the box or select a previously-used one from the drop-down list. The text can be a title for the overall movie, or, you can change the text during each of several takes to provide text details or captions for the activities being shown.

• Click [Options…] to set up the appearance and position of the text annotation on the Caption Options Dialog.

• Place a check mark in the Prompt before capture box if you would like to enter the text annotation for each capture just before recording.

Note: For a different method of applying annotations, see also: Using ScreenPad Annotations.

Highlight Section

These settings apply to the highlight effect options selected under Effects > Highlight and Effects > AutoHighlight.

• Width __ pixels - Type the number of pixels of width for the highlight box.

• Click [Color…] to select a color for the highlight box.

For more detail on using the Highlight and AutoHighlight options, see also: Effects > Highlight and AutoHighlight.

ScreenDraw Section

These settings apply to the screen drawing effect options selected under Effects > ScreenDraw.

• Tool drop-down list - Select the tool from the available options: Frame, Highlight, Ellipse, Pen, Line, and Arrow. The Sample on the left side of this section shows what the effect will look like.

• Color drop-down list - Select one of the eight primary Windows colors for the ScreenDraw tool.

• Width spinner - Set the width of lines used by the ScreenDraw tool, from 1 (thinnest) to 8 (thickest).

• Translucent checkbox - If the box is checked, the ScreenDraw effect is see-through. If unchecked, the effect is solid color.

For more detail on using the Highlight and AutoHighlight options, see also: Using ScreenDraw.

Caption Options Dialog

Drop Shadow Background Color Text Color Transparent Background Font StyleThis dialog allows you to set caption appearance and placement options. The options are pretty much self-explanatory since the preview on the dialog shows the effect as you change options.

Style - Sets the text style of the caption.

• Normal: plain text

• Drop Shadow: text is raised and a drop shadow is added

• Outlined Shadow: text is outlined with a heavy drop shadow

Transparent Background - Text is rendered on the movie with a transparent background, that is, the movie will show through where the text is rendered. Otherwise, text is written on a solid background color (that is, a colored box appears around the text).

Word Wrap - Text can only be wrapped if Transparent Background is selected. Otherwise, text is written on a single line and is truncated when the length exceeds the available space in the movie capture area.

Position - You can select one of nine positions for the caption to appear in the capture area. Position is shown in the preview area below.

Font - Select the font from those installed on your computer. You can also select Font Style and Size.

Text Color, Background Color, Shadow Color, and Outline Color. You can select individual colors for each of these elements of the caption. The chip and preview area shows your selections.

Audio Effects

Keyboard Sounds Audio Effects Effects MenuEffects Menu > Audio > Record Audio

Click the Record Audio icon the Audio Toolbar, or select it from the Effects menu, to capture audio in "real time" while also capturing video.

Note: You must have a sound card with a microphone attached. An audio "level meter" appears in the Recorder status area to show the relative recording volume level.

To enable the capture of audio along with the video:

1 First, set audio properties using Options > Preferences > AVI tab [Audio Setup…] button.

2 Click [Record Audio] button on the Audio Toolbar, or select Effects > Audio > Record Audio. A check mark appears next to the menu option and the Audio Toolbar shows the option has been selected.

3 Record your video as directed in the topic: Video Capture Overview.

4 While recording screen movements (video), speak into the attached microphone to add audio in time with screen actions.

Effects Menu > Audio > Cursor Sounds

Click the Cursor Sounds icon on Audio Toolbar, or select it from the Effects menu, to add the sound of a mouse clicking whenever you perform a mouse click during video capture. See also: Effects > Settings > Audio.

Effects Menu > Audio > Keyboard Sounds

Click the Keyboard Sounds icon on Audio Toolbar, or select it from the Effects menu, to add the sound of keyboard keys whenever you type during video capture. See also: Effects > Settings > Audio.

Effects > Settings > Audio

Audio Keyboard Sound Effects Mouse Sound EffectsUse this tab to set up audio sound effects for mouse and keyboard clicks.

Mouse Sound Effects

• Specify in the appropriate box the WAV file to be played to signify mouse button down and mouse button up. (We provide two sample files, ClickDown.wav and ClickUp.wav.)

• Use the […] button to search for WAV files if you want to change from the samples.

• Use the speaker button to preview the sounds.

• Use the Volume slider to adjust the relative volume of the effect in the rendered movie.

Keyboard Sound Effects

• Specify in the appropriate box the WAV file to be played to signify key down. (We provide a sample file, KeyDown.wav.)

• Use the […] button to search for WAV files if you want to change from the sample.

• Use the speaker button to preview the sounds.

• Use the Volume slider to adjust the relative volume of the effect in the rendered movie.

Cursor Effects

Effects Setting Cursor EffectsCursor effects can help illustrate the action you are recording by drawing attention to the area where the action happens. When these effects are used in conjunction with mouse click sound effects, viewers of your video can quickly understand the actions taking place.

The following cursor effects can be selected:

Hide Cursor

Show Cursor

Highlight Clicks

Highlight Cursor

Highlight Cursor & Clicks

For more information on Setting Cursor Effects, see also:

Effects > Settings > Cursor

Effects > Settings > Cursor

Cursor Setup Cursor Cursor Effects SettingsUse this tab to set cursor and mouse click options to be used during capture. These effects can help illustrate the action you are recording by drawing attention to the area where the action happens. When these effects are used in conjunction with mouse click sound effects, viewers of your video can quickly understand the actions taking place.

1 First, turn on the mouse and cursor effects with menu choices Effects > Cursor > (select the cursor effect option you want to turn ON).

2 Select Effects > Settings to open the Effects tabbed dialog.

3 Click the Cursor tab to set cursor effects.

4 Click [Cursor Setup…] to change the appearance of the cursor pointer on screen. The Cursor Setup Dialog appears.

5 Select the cursor you would like to use for your video. Click each radio button to see the options available. (The standard Windows cursor is the default.)

6 Click [OK].

7 Under Highlight Cursor, select a cursor highlight shape from the drop-down list. You can also set the color (using the [Color…] button), the Size of the highlight area (using the slider), and select whether the highlight is to be Translucent, Semi-translucent, or Opaque. The preview area shows the appearance of each of these selections.

8 Under Highlight Mouse Clicks, you can select a ring or circle pattern to be used for both right and left mouse button clicks. You can also select the color and size of the effect.

9 Click [OK] to set the cursor effects for the videos you record. Camtasia saves your settings.

Watermark Effects

EffectsWatermarks can help you stamp ownership on the videos you record using Camtasia. This effect places a small image into the recording area and allows you to set options for its appearance. You can make it look like the "bugs" that are placed in the lower right-hand corner of network TV shows.

The following selections can be made on the Effects > Settings > Watermark tab to create just the right effect:

Image Path

Overlay Watermark

Underlay Watermark

Emboss

Emboss Depth

Emboss Direction

Positioning Cluster

Image Scale Slider

Horizontal Offset

Vertical Offset

Keep aspect ratio when scaling

Use smooth interpolated scaling

In addition an image Preview Button and Screen help you visualize what the effect will look like when the recording is complete.

Effects > Settings > Watermark

Watermark Effects SettingsYou can add a watermark, or in TV lingo, a "bug" in any fixed position in the movie window. This is helpful to stamp ownership on the intellectual property the movie represents. As such, a unique mark such as a company logo is appropriate. However, you can use this feature to position any other information you would like into the production, such as titles, banner ads, etc. As input, you can use graphic files in .BMP, .GIF, or .JPG format.

Note: Watermarks can also be added in the final movie production using Camtasia Producer.

To place a watermark in a movie recording:

1 Select Effects > Settings…. The Effects Tabbed Dialog appears.

2 Select the Watermark tab. Watermark options are available and the Watermark Preview appears to show how the watermark will look.

3 In the Image Path box, either type the path and filename for the image you are using as the source of the watermark or click the open folder button to find it.

4 The [Preview] button acts as a toggle to either show or hide the preview window, which shows a model of how the watermark will look in the finished movie.

5 In the Display Effects area, choose if you would like an Overlay or Underlay watermark. Depending on the option you select, the appropriate sub-options become available.

6 If you selected Overlay, also place a checkmark in Use Transparent Color if you would like to use this effect. Use the [Change] button to select the Transparent Color to be used.

7 If you selected Underlay, also place a checkmark in Emboss if you would like to use this effect. You also need to specify the Direction and Depth of the embossed image.

Note: You may have to experiment with overlay and underlay effects. Use the [Preview] button to view changes you make on a Preview screen before recording.

8 In the Image Positioning area, choose the relative position on-screen where you would like the watermark using the nine-button Positioning Cluster.

9 Using the Image Scale Slider, set the size of the watermark. The percentage figure represents percentage of the finished movie dimensions.

10 Set the Horizontal Offset and Vertical Offset.

11 Place a checkmark in the Keep aspect ratio when scaling box to use this option.

12 Place a checkmark in the Use smooth interpolated scaling to use this option.

13 Click [OK]. Watermark settings are saved.

Zoom and Pan Effects

Zoom Panning Effects Zoom Effects Zoom and Pan EffectsYou can set up zooming and panning options for your videos. These options can help follow the action on screen or zoom in or out during recording to show more detail on screen or cover more area.

Note: Zoom is a processor-intensive operation and depending on the capture area and configured frame rate, you may not have a fast enough system to zoom properly. The result is that the effective capture frame rate (that is, the rate shown in the "Statistics" part of the Camtasia status area) can drop below the configured capture frame rate (that is, the rate shown in the "Properties" part of the Camtasia status area) when zoom effects are applied. Video frames are "dropped." However, the results are sometimes acceptable even when the effective frame rate drops.

The following zoom and pan effects can be selected:

AutoPan

AutoZoom

Zoom Out

Zoom In

Zoom To

Zoom Undo

For more information on Zooming and Panning, see also:

Effects > Settings > Zoom

Panning the Video Capture Area

Effects > Settings > Zoom

AutoPan Zoom Hotkeys AutoZoom Zoom EffectsThis tab configures the zoom effects. You can set up zooming and panning options for your videos. These options can help follow the action on screen or zoom in or out during recording to show more detail on screen or cover more area.

AutoZoom speed - This controls the speed of the rendered zooming effect (that is, the speed of the image scaling).

AutoPan speed - This controls the speed at which the capture area follows the mouse. Use this when you want to capture a smaller area of a screen where the action is and ignore the inactive areas. This can help limit file size and help to focus attention.

Zoom level at start of capture - This configures a preset zoom level when the capture begins. The default value is 100%. Values less than 100% makes Camtasia start zoomed out. Values greater than 100% makes Camtasia start zoomed in.

Center zoom effect - If selected, when the zoom effect is rendered, Camtasia always centers the new capture area over the old area. In the final movie, the visual effect is that Camtasia automatically pans the image so it stays centered over the previous area. The default setting is OFF.

Use smooth interpolated scaling - If selected, Camtasia uses a smooth scaling algorithm that makes images more readable when zoomed out. The default setting is ON.

Note: Enabling this option may degrade the movie frame rate since smooth interpolated scaling requires much more computer processing to render the effect.

Smooth scale during AutoZoom - If selected, Camtasia uses the smooth scaling algorithm while rendering the AutoZoom effect. This makes the zooming effect look nicer, but again the movie frame rate may degrade. This option is OFF by default.

Note: You can zoom in or out on the action during recording by using the Zoom Hotkeys. For more information, see Advanced Hotkeys.

Using ScreenDraw

ScreenDraw Hotkey PressYou can draw various shapes on screen while recording to highlight and draw focus to a particular area. This feature is activated using a hotkey (select your hotkeys using Options > Preferences > Hotkeys).

1 Select menu option Effects > Settings. On the Annotation tab, set ScreenDraw tool options. For more information, see also: Effects > Settings > Annotation.

Note: You can also set tool options during recording or when Recorder is paused. See step 4.

2 Start recording.

3 Start ScreenDraw by clicking the toolbar icon or pressing the ScreenDraw hotkey. The cursor changes on screen and indicates the drawing tool selected.

4 If you want to set or change options now, you can pause recording to do so. Right-click over the capture area. Select one of the drawing tool options listed by clicking on a tool name or pressing the accelerator key listed next to the tool names. The drawing tools are:

• Frame: Draws a rectangular shape.

• Highlight: Produces a Highlighter pen effect.

• Ellipse: Draws circles and oval shapes.

• Pen: Allows freehand drawing, similar to sportcaster drawings on TV.

• Line: Creates straight lines.

• Arrow: Draws single-headed arrows to point to elements.

5 If you need to set line Width and Color, you may do so on the Options menu.

6 To stop drawing, press or the stop hotkey ( is the default). When you stop, the effect disappears from the screen.

Note: You can change drawing tools during capture by pressing the accelerator key associated with the tool you want to select.

Camtasia Recorder Toolbars

Annotation Toolbar

| Watermark |Add Time/Date: Select this icon to add an annotation with the current time and date to |

|AutoHighlig|your movies. |

|ht | |

|Toolbar:Ann| |

|otation | |

|Highlight[p| |

|ic] | |

|[pic] |Add Caption: Select this icon to add a text annotation to your movies. The caption text |

| |can be entered in the Effects > Settings > Annotation dialog before starting a capture, or|

| |while a capture is paused. |

|[pic] |Add Watermark: Select this icon to add a watermark to your movies. The watermark options |

| |are set up in the Effects > Settings > Watermark dialog. |

|[pic] |AutoHighlight: Select this icon to add a highlight border to areas of the capture |

| |(typically a window, dialog, or box) as the cursor passes over them during capture. An |

| |outline area is added during capture. The width and color of the highlight line are set in|

| |the Effects > Settings > Annotation. Note: You can use Capture > Pause/Resume to control |

| |exactly when and where the AutoHighlight effect appears. |

|[pic] |Highlight: Select this icon to add a fixed highlight border to a selected area of the |

| |capture (typically a window, dialog, or box). An outline area is added during capture. The|

| |width and color of the highlight line are set in the Effects > Settings > Annotation. |

| |Note: Select Effects > Highlight or the Highlight icon again to disable (hide) the |

| |highlight effect. |

|[pic] |ScreenDraw: Select this icon to add a drawing effect over the screen. You can draw various|

| |shapes, such as Frame, Highlight, Ellipse, Pen, Line, or Arrow. The appearance of |

| |ScreenDraw objects is controlled using Effects > Settings > Annotation. For more |

| |information, see also: Using ScreenDraw. |

Audio Toolbar

| |Select this icon to turn on the recording audio with your movie. |

|Toolbar:Aud| |

|io[pic] | |

|[pic] |Select this icon to add sounds for cursor clicks with the audio of your movie. |

|[pic] |Select this icon to add sounds for key clicks with the audio of your movie. |

Cursor Toolbar

| |Select this icon to hide the cursor during recording of your movies. |

|Toolbar:Cur| |

|sor[pic] | |

|[pic] |Select this icon to show the cursor during recording of your movies. |

|[pic] |Select this icon to highlight visually the clicking of the cursor during the |

| |recording of your movies. |

|[pic] |Select this icon to highlight the cursor with a translucent outline during the |

| |recording of your movies. |

|[pic] |Select this icon to turn on highlighting of both cursor clicks (with a visual |

| |hint) and movement (with a translucent outline). |

Zoom Toolbar

Toolbar:Zoom ToolbarNote: The Zoom Toolbar is only available during capture. You can use these buttons to set zoom options while recording is paused (before you press record the second time).

|[pic] |Select this icon to AutoPan the area you are recording. This option follows the|

| |cursor while you are recording with a floating area that shows where the action|

| |happens. |

|[pic] |Select this icon to AutoZoom during recording. This option sets up an automatic|

| |zoom in or zoom out on the action. Set the zoom direction and amount using |

| |Effects > Settings > Zoom. |

|[pic] |Select this icon to zoom out on the area you are recording. This allows you to |

| |reduce a portion of the screen or application area (and therefore capture a |

| |larger area). The percentage of zoom is indicated on the status display. |

|[pic] |Select this icon to zoom in on the area you are recording. This allows you to |

| |enlarge a portion of the screen or application area (and therefore capture a |

| |smaller area). The percentage of zoom is indicated on the status display. |

|[pic] |Select this icon to set the zoom back to 100 percent. Click the arrow to the |

| |right of the icon to zoom to a specific size, which you can select from the |

| |menu that drops down. |

|[pic] |Select this icon to undo the zoom setting and return to the previous one |

| |selected. |

Camtasia Recorder Menus

Options > Preferences > AVI

Interleave Time-lapse Capture Video Options Selecting:AVI Selecting:Audio Capture Device TechSmith Screen Capture Codec PreferencesUse this tab to set preferences for movies recorded using Camtasia. While you can only record files as AVI in Camtasia Recorder, you can convert them to other output formats, including .WMV and RealVideo, using Camtasia Producer.

1 Click Options > Preferences… and select the AVI tab.

Video Options

2 Place a check mark in the Auto Configure box if you want to use Camtasia defaults. The program automatically determines the best frame rate and compression to use (Recommended).

3 Clear the check mark in the Auto Configure box if you want to set your own and experiment. For more information, see also: Distributing Your Movie.

4 Click [Video Setup…] to set up video compression. The Video Compression Dialog appears. You can select the Codec and quality levels that suit your recording. For best performance from the TechSmith Screen Capture Codec, see also: Distributing Your Movie and Performance Notes.

5 You can enter the frame rate in frames/sec. While more frames per second usually produces smoother videos, your resulting movie file will be proportionally larger and more system resources will be required to record the video.

6 Place a check mark in the Time-lapse Capture box if you want very slow capture rates. For more information, see also: Time-lapse Capture Setup Dialog.

Note: If Time-lapse capture is ON, audio recording is disabled.

Audio Options

7 If you are recording audio with your video, you should click [Audio Setup…]. For more details, see also: Audio Format Dialog.

8 Leave the check mark in the Interleave audio every __ box unless you want to change this default value. For more details, see also: Interleave Audio and Video.

9 Select the Audio Capture Device from the drop-down list. You should select the best performing device you have on your computer.

10 Click the [Volume] button to reveal a Record Control, where you can set recording volume levels for the input device selected.

Description:

11 The Description box shows details about the selections you have made on this tab for the audio and video options of the AVI files you are recording.

Options > Preferences > File

File Name File:select File Name:Ask FileUse this tab to set file naming options for Camtasia Recorder. You can choose to have the program prompt you for a file name or set the name to be assigned automatically. Also, you can specify elements of file names and folder for them to be stored.

1 Click Options > Preferences… and select the File tab.

Note: The file name extension will always be .AVI. This cannot be changed.

2 Click the radio button ON next to one of the file name options:

• Ask for File Name. Select this if you want to name each file separately as it is recorded.

• Fixed File Name. Select this if you want to set a single file name that will be overwritten with each recording. Also type the name of the file in the text box.

• Automatic File Name. Select this if you want automatically created and incremented filenames for your recordings. Also type the name of a destination Output Folder in the text box provided. This folder must already exist. Alternatively, you can select an existing folder by clicking on to folder open icon to locate one. Files will be saved with the prefix you supply and a number, such as Video-001.avi, Video-002.avi, and so on.

3 Click [OK] to save the options.

4 Click [Cancel] only if you want to loose the changes you have made and start over.

Audio Format Dialog

Save Preferences Save:Audio FormatThe [Audio Setup…] button on the Preferences AVI Tab and the Audio Format dialog allow you to set the audio format for movies that you capture while recording audio. To use this feature, you must have a sound card with a microphone attached.

1 Click Options > Preferences…. The Preferences tabbed dialog appears.

2 Select the AVI tab and click the [Audio Setup...] button. The Audio Format dialog appears.

3 If you have a named format you want to use, select if from the Name: drop-down box. You can skip to step 6 unless you want to make changes to the named format.

4 Select an audio file format from the Format: box. Refer to the file type provider for information about the individual selections.

5 Select the audio Attributes: from the list. The higher the KB/s number, the larger your files will be.

6 Click [OK] to save the Audio Format or [Cancel] to abandon any changes you made on the dialog.

Note: If you want to save your file format settings to a named format for future use, click [Save As…] to preserve them. You are prompted for a format name, which will appear in the Name: list on future use.

Audio Format Note

Note: We recommend recording in PCM format (the default selection) for best sound quality. If you need to change it, you can also do so in Camtasia Producer when creating the final produced video.

Note: The audio format you specify determines the quality of the movie audio track and also affects movie file size. Higher quality audio results in a larger movie file size. By default, Camtasia Recorder uses the PCM (uncompressed audio) format. This is recommended for the highest quality recording and also for joining clips later in Camtasia Producer or any other video editor. If you need to produce a movie with compressed audio, it is best to do this after editing in Camtasia Producer. Recording your original narrative in uncompressed PCM format allows you to choose many audio compression/quality options later, during production.

Time-lapse Capture Setup Dialog

Options Time-lapse Time-lapse Capture AVI Playback Rate:Set PreferencesIf you configure AVI Options manually, you have the option of setting timing to slow or very slow frame rates. This may be useful for setting up a "watching" application, for example, or capturing program activities that take a long time (programs that require lengthy processing times).

Set up the option as follows:

1 On the Options > Preferences > AVI tab, click OFF the check mark in Auto Configure.

2 Click ON a check mark next to Time-lapse Capture.

Note: If Time-lapse capture is ON, audio recording is disabled.

3 Click [Time-lapse Setup…]. The Time-lapse Capture Setup dialog appears.

4 Set the AVI Capture Rate on the top portion of the dialog. This controls the timing of Camtasia "snapshots" of individual frames to be included in the video.

5 Set the AVI Playback Rate on the bottom portion of the dialog. This controls how the AVI will play back. The playback rate is kept the same as the capture rate by default, but you can use a faster playback rate to compress the timing, length, and file size of the video.

6 Click [OK] to accept the changes on the Setup dialog. Click [Cancel] to abandon your changes. Click [Default] to set the frame rate to Camtasia default setting, 5 fps.

For another useful periodic frame capture option, see also: Capture Single Frames.

Options > Preferences > Hotkeys

F10 Record/Pause hotkey Options F9 Hotkeys ScreenDraw Standard hotkeys Stop Hotkey ScreenDraw Hotkey Change Start Change:Hotkey CombinationThere are three standard Camtasia Recorder hotkeys and four advanced ones. A hotkey or combination of hotkeys allows you to activate some action quickly, without the need to select menus or click on-screen buttons. The Standard hotkeys and their defaults are:

|Record/Pause Hotkey |Starts recording if Recorder is stopped; pauses |F9 |

| |recording if Recorder is running. | |

|Stop Hotkey |Stops Recorder. |F10 |

|ScreenDraw Hotkey |Start the ScreenDraw feature. Press hotkey 2nd time|Not enabled |

| |to stop. | |

There are additional Advanced hotkeys. See also: Advanced Hotkeys.

You may have to change the hotkeys if the default ones interfere with some other program operation.

To Change the Hotkey Combination

1 Click Options > Preferences.

2 Select the Hotkeys tab.

3 To change the hotkeys for any available option, place a checkmark in one or more boxes below CTRL, SHIFT, or ALT if you want to include them in your hotkey combination for the selected action.

4 Select another keyboard key from the drop-down box on the right. You can choose most keyboard keys here.

Example: If you want to use the key combination + + to record or pause a recording, you would check the CTRL and ALT boxes, and select the letter C from the drop-down list. Then, to activate or pause recording, you would hold down the and keys while you press C.

Advanced Hotkeys

Options Hotkeys Hide/unhide Preferences HotkeyThe advanced hotkeys are accessed from the Options > Preferences > Hotkeys tab. The hotkeys are set up the same way standard hotkeys are. See also: Options > Preferences > Hotkeys.

The advanced hotkeys and their defaults are:

|AutoPan Hotkey |Turns on the AutoPan feature during recording. |Not enabled |

| |Press hotkey 2nd time to turn off. | |

|Hide Hotkey |Hides the Recorder screen and disables the |Not enabled |

| |hide/unhide tray icon hotkey. | |

|Zoom In Hotkey |Zooms in on the recorded area. Press hotkey |Not enabled |

| |additional times to zoom farther. | |

|Zoom Out Hotkey |Zooms out from the recorded area. Press hotkey |Not enabled |

| |additional times to zoom farther. | |

Options > Preferences > Live

Selecting Live Output Selecting:Live Adobe Premiere CaptureThe Live Output option available is turned ON with menus Capture > Output > Live. The frame rate is set using Options > Preferences > Live. This feature allows you to feed live desktop video to other applications as a video source. For more information, see also: Live Output Feature Description.

To Use Live Output

1 Turn the Live Output feature ON by selecting menu choices Capture > Output > Live. A checkmark is placed next to the menu option, indicating Live Output mode is ON.

2 Select menu Options > Preferences. The Preferences tabbed dialog appears.

3 Select the Live tab.

4 Set the Live capture rate in frames per second.

Note: The Live capture rate determines how frequently Camtasia updates video frames during live output. This can be used to control the system resources (CPU, for example) used by Camtasia.

5 Start the application you are sending live video to.

Note: This may be a streaming media encoder, such as Windows Media Encoder or RealProducer, or it may be a video capture application such as Adobe Premiere, or it may be a live web cam application.

6 In the application you are sending video to, select the Camtasia Video Capture Device as the live source.

7 Use Camtasia Recorder just as you would for output to a movie file. See also: Recording Video.

Live Output Feature Description

Live OutputThe Live Output feature allows Camtasia Recorder to appear as a standard video capture device that can be used as a video source by applications such as: streaming media encoders, video conferencing applications, video editors, and web cam applications. The live output option essentially makes Camtasia Recorder a "plug in" that provides a unique source of content and enhances these applications. These applications normally use real hardware video cameras as their video source.

The live output feature makes Camtasia Recorder appear as another video camera on the system. However, Camtasia Recorder's live output is a software camera that records from the desktop. With the live output option ON, Camtasia Recorder feeds its video frames to applications like a streaming media encoder instead of saving them to a movie file. The same VCR-style record/pause/resume/stop controls are used during a live output session as when recording to a movie file. All of Camtasia Recorder's video effects (cursor highlights, pan, zoom, and all annotation effects) apply for live output. Input options are disabled since you are sending your entire screen into the feed.

Note: Some live encoding applications (for example, the free version of RealProducer) only allow you to choose a single default video capture device. If you have more than one video capture device on your system, such as a video capture card, then the Camtasia video capture device may not be available in the encoding application. In this case, disable the non-Camtasia capture device using the Control Panel Multimedia applet. In the Multimedia applet, go to the Devices tab, expand the Video Capture Devices list, select the device to disable, click the [Properties…] button, and choose Do not use this video capture device.

For information on using this feature, see also:

Capture Menu > Output Options

Options > Preferences > Live

Effects > Settings > Watermark

Options > Preferences > Program

Options Program Temporary File Folder TSCCUse this tab to set Camtasia Recorder Program Capture Options. Place a checkmark in the box next to each option you want to turn ON.

Capture Options

• Minimize before starting capture - default is OFF. Set to ON if you want the recorder program window to reduce to the system tray while capturing video.

• Pause before starting capture - default is OFF. Pausing before capture allows you to arrange and position windows and the capture rectangle before beginning the capture.

• Boost priority during capture - default is OFF. This gives Camtasia a higher processor priority which can mean better performance (that is, better or faster frame rate captures).

• Hide capture rectangle - default is OFF. If you place a checkmark in the box, the capture rectangle will no long appear before and during captures.

• Solid capture rectangle - default is OFF. The default capture rectangle comprises short angles at each corner of the rectangle. Place a checkmark in the box to turn it into a solid rectangle.

• Play movie after saving file - default is ON. If you don’t need to preview the movie after capturing it, remove the checkmark.

• Play AVI files with Camtasia Player – default is ON. If you do not want to use Camtasia Player, remove the checkmark. Your selected Windows movie player will be used instead.

• Report dropped frames - default is OFF. This causes Camtasia to report dropped frames in the status display. This is helpful to see and understand what the maximum frame rate Camtasia can achieve.

• Always on top - default is OFF. This puts Camtasia at the top of any layered applications on your computer desktop.

• Round frame size to a 4 pixel boundary - default is ON. When it is ON, the horizontal and vertical pixel dimensions of the movie you are creating are forced to a multiple of 4. This eliminates errors occurring when viewing movies created with certain codecs (such as Microsoft Video 1) which requires frames that are multiples of 4 pixels.

Note: The TSCC video codec does not have this limitation—movies are encoded and decoded with any pixel dimensions.

• Disable display acceleration during capture - default is OFF. Disabling hardware display acceleration on Windows 2000 or later can dramatically increase frame rates and/or reduce system load during recording.

Note: When display acceleration is disabled, your screen will momentarily blank at the start and end of recording. This is normal.

• Capture layered windows - default is OFF. Put a check mark in the box to allow the capture of translucent or irregularly shaped layered windows. An example of a layered window is the Office Assistant in Microsoft Office 2000.

Note: This feature only works when capturing on Windows 2000, XP, or later.

Temporary File Folder

Specify a drive and folder where files will be stored temporarily during capture and before you save them to another location. The default C:\WINDOWS\TEMP is fine if you have room on your C: drive. Use the fastest local hard drive on your system that has the most free space. If you need to change the location, click […] to search for a new one.

ScreenPad Annotations

Using ScreenPad Annotations

ScreenPad AnnotationYou can add ScreenPad annotations to your captured video. These can be captions, callouts, logos, stamps, sticky notes, or any fixed visual you want to include in the scene during recording. The annotations are actually graphics files that can be existing .BMP, .GIF, or JPG images, or you can use the included graphic editor to create them. You can also use another graphic program to create your annotations, such as SnagIt Studio or any graphic program that can save files as images.

Note: Don’t forget you can accumulate annotations into Layouts in the Layout Library, then "playback" a sequence of layouts using ScreenPad Hotkets. For more information, see Using ScreenPad Layouts.

1 Select menu options View > ScreenPad or click the ScreenPad icon on the toolbar [pic]. The ScreenPad appears.

2 Choose an Object Library from ScreenPad [pic].

3 Choose an annotation from the ScreenPad and drag it into the scene to be captured. Drop it where you want it to appear in the scene.

4 To resize the annotation: right-click over the annotation and select Resize….

5 To type text over the object and set text format: right-click over the annotation and select Edit Text….

6 Start recorder as usual. The ScreenPad annotation will be included in the recording in the position you placed it.

7 To remove an annotation from the recording scene: right-click over the annotation and select Close or Close All Objects (closes all annotations that are currently open).

Note: You can use as many annotations as you want, but be careful not to create a cluttered look in your movie.

You can create your own libraries of annotation shapes and save them as ScreenPad layouts. These saved layouts can be restored on the desktop in their original positions. For more information, see also:

Creating New Annotations in ScreenPad

Importing Background Images into ScreenPad

Creating and Saving Layouts

Using ScreenPad Layouts

Editing Annotation Images

Editing Annotation Text

Creating New Annotations in ScreenPad

New Object Annotations New Annotation:Create Creating Creating:New ScreenPad Selecting:Object Library AnnotationAnnotation objects (bitmap images) are managed in the ScreenPad. The ScreenPad allows you to import new images (.BMP, .GIF, or JPG) for storage there or to create new images using the included Image Editor. You can also add text to the graphic background while you create annotations, either by importing images or using the Image Editor. After creating and storing these images in the ScreenPad, you can drag-and-drop them into scenes you are capturing with Camtasia Recorder or include them in Layouts that can be shown and sequenced during recording.

To Create a New Annotation:

1 Select menu options View > ScreenPad or click the ScreenPad icon on the toolbar [pic]. The ScreenPad appears.

2 Select the Object Library [pic] in which you want to create a new annotation. Example: The default "My shapes" is an Object Library.

Note: To create a new Object Library in ScreenPad, right-click over the ScreenPad and select New.

3 Right-click over ScreenPad (with the library you want open) and select New Object…. The New Object dialog appears.

4 Enter the Name of the Annotation in the Name: box.

5 To create a new image with a blank background, select the Blank radio button and set the Image dimensions (in pixels).

6 To create an image from an existing image file, select the Image file radio button and select the file to import.

7 If you would like to add a text caption over the image, type it in the text box. You can set text position and format later. See also: Editing Annotation Text.

8 Click [OK]. The new object is created in ScreenPad.

For more information on the drawing tools in the Image Editor, see also: Image Editor Drawing Tools.

For more information on including your annotations in the Layout Library and controlling their appearance and sequence during capture, see also: Creating and Saving Layouts.

Importing Background Images into ScreenPad

Background Image ScreenPad Annotation Image EditorAnnotation objects (bitmap images) are managed in the ScreenPad. The ScreenPad allows you to import new images (.BMP, .GIF, or JPG) as the background of the annotation object. You can also add text over the background image in the New Object Dialog. Once an image has been imported as an annotation object, you can edit the image using ScreenPad’s image editor (to choose a transparent color, for example). After creating and storing these images in the ScreenPad, you can drag-and-drop them into scenes you are capturing with Camtasia Recorder. And any time you need to change the text over the image background, you can do so on the New Object Dialog.

To Import Background Images into the ScreenPad:

1 Select menu options View > ScreenPad or click the ScreenPad icon on the toolbar [pic]. The ScreenPad appears.

2 Select the Object Library [pic] in which you want to import an image. Example: The default "My shapes" is an Object Library.

Note: To create a new Object Library in ScreenPad, right-click over the ScreenPad and select New Object….

3 Right-click over ScreenPad (with the library you want open) and select New Object…. The New Object dialog appears.

4 Enter the Name of the Annotation in the Name: box.

5 To create an image from an existing image file, select the Image file radio button and select the file to import.

6 If you would like to add a text caption over the image, type it in the text box. You can set text position and format later. See also: Editing Annotation Text.

7 Click [OK]. The new object is created in ScreenPad.

See also:

Editing Annotation Images

Editing Annotation Text

Image Editor Drawing Tools

Creating and Saving Layouts

Editing Annotation Images

Images Object Library:Select Selecting:Object Library Annotation Image Editor Edit Image Annotation:EditYou can edit any image in the ScreenPad using the Image Editor.

To Edit an Annotation:

1 Select menu options View > ScreenPad or click the ScreenPad icon [pic] on the toolbar. The ScreenPad appears.

2 Select the Object Library [pic] in which the annotation you want to edit exists.

3 Right-click over the image you want to edit and select Edit Image…. The Image Editor appears.

4 Edit the annotation using the drawing tools.

5 Click [OK] to save the edited image in the Object Library.

Note: You can use the Image Editor to set a transparent color for the annotation. This creates a transparent effect where the background over which an irregularly shaped annotation is placed shows through in the irregular areas. If you edit an imported transparent GIF file, the transparent color specified in the file will be used. Otherwise, transparency is OFF by default.

TIP: Use a simple, low color image file (one of the 16 colors, for example) whenever possible. Larger, high color images use lots of memory and can slow Recorder performance.

For more information, see also:

Image Editor Drawing Tools

Editing Annotation Text

Editing Annotation Text

Object Library:Select Selecting:Object Library Text Image Editor Edit TextYou can add text to any image in the ScreenPad, set the font, format, and position of the text, and edit it later if you need to make changes.

To Add Text to an Annotation:

1 Select menu options View > ScreenPad or click the ScreenPad icon [pic] on the toolbar. The ScreenPad appears.

2 Select the Object Library [pic] that contains the image to which you would like to add text.

3 Right-click over the image you want to add text to and select Edit Text…. The Text Viewer Window and Text Tool appear.

4 Type the text you want to add in the box provided on the Text Tool. Set text font, color, alignment, and format using the toolbar at the top of the Text Tool.

5 In the Text Viewer Window, the text you have added is contained in the rectangular dashed outline box over the image. Position the text by clicking over the selection handles around the perimeter of the image, or anywhere inside the dashed rectangle, and drag until the text is properly positioned.

Note: You can scale the background image using the Scale Image slider controls. These scale factors can be independent or equal. If you want to scale horizontal and vertical sizes equally, place a check mark in the Keep Aspect Ratio box.

6 Click [OK] to save the image and text annotation in the Object Library.

Note: You can only save changes when editing an annotation from the Object Library. Changes made to floating annotations are not saved unless they are added to a Layout. The changes to the individual annotation are not saved.

For more information, see also:

Image Editor Drawing Tools

Editing Annotation Images

Image Editor Drawing Tools

Transparency Color Tools

|Icon |Name |Description |

|[pic] |Zoom Slider |Adjust the view zoom level to any magnification. |

|[pic] |Cut |Cut or delete the selected area from the drawing. |

|[pic] |Copy |Copy the selected area to the clipboard for pasting. |

|[pic] |Paste |Paste the contents of the clipboard to the drawing. |

|[pic] |Clear |Clear the drawing area. |

|[pic] |Undo |Undo the most recent change to the drawing. |

|[pic] |Redo |Redo a change that has been undone. |

|[pic] |Magnify |Magnify the selected area. |

|[pic] |Size to fit Window |Change the view size of the drawing to fit the Image Editor |

| | |window size. |

|[pic] |Resize |Resize the drawing to specific pixel dimensions. Also, change |

| | |the color depth of the drawing. |

|[pic] |Select Area |Select a rectangular area of the drawing for editing or |

| | |manipulation using the other tools. |

|[pic] |Select Color |Click the eyedropper, then left-click over an area of the |

| | |drawing to select the foreground color. Right-click over an area|

| | |to select the transparency color. |

|[pic] |Flood Fill |Click the paint can, then click an area of the drawing to pour |

| | |the color into. Color: Eyedropper or Color Selector. |

|[pic] |Add Text |Add text over the drawing. You can select formatting |

| | |characteristics from the Text Tool dialog that appears. Color: |

| | |Eyedropper or Color Selector. |

|[pic] |Air Brush |Spray the color in random patterns to partially color or fill an|

| | |area. Color: Eyedropper or Color Selector. |

|[pic] |Freehand Erase |Erase an area of the drawing. Width: Eraser Width. |

|[pic] |Freehand Draw |Draw a line freehand in the drawing area. Line width is set with|

| | |the Pen Width button. Color: Eyedropper or Color Selector. |

|[pic] |Line |Draw a straight line in the drawing area. Line width is set with|

| | |the Pen Width button. Color: Eyedropper or Color Selector. |

|[pic] |Eraser Width |Use this button to set the size of the Freehand Eraser tool. |

|[pic] |Pen Width |Use this button to set the pixel width of freehand lines, |

| | |straight lines, and shapes. |

|[pic] |Rectangle |Draw a rectangle shape in the drawing area. Color: Eyedropper or|

| | |Color Selector. Width: Pen Width. |

|[pic] |Rounded Rectangle |Draw a rounded rectangle shape in the drawing area. Border width|

| | |is set with the Pen Width button. Color: Eyedropper or Color |

| | |Selector. Width: Pen Width. |

|[pic] |Ellipse |Draw an ellipse (circle or oval) in the drawing area. Border |

| | |width is set with the Pen Width button. Color: Eyedropper or |

| | |Color Selector. Width: Pen Width. |

|[pic] |Filled Rectangle |Draw a filled rectangle shape in the drawing area using the |

| | |foreground color. Color: Eyedropper or Color Selector. |

|[pic] |Filled Rounded |Draw a filled rounded rectangle shape in the drawing area. |

| |Rectangle |Color: Eyedropper or Color Selector. |

|[pic] |Filled Ellipse |Draw a filled ellipse (circle or oval) in the drawing area. |

| | |Color: Eyedropper or Color Selector. |

|[pic] |Foreground Color |Click the down arrow to select the color, or use the eyedropper |

| | |and left-click over the image to select the foreground color to |

| | |be used with any drawing tool. |

|[pic] |Transparency Color |Click the down arrow to select the color, or use the eyedropper |

| | |and right-click over the image to select the color that will be |

| | |used as transparent. |

Using ScreenPad Layouts

ScreenPad Layouts:Using Hotkeys:ScreenPad Hotkeys LayoutsAfter you have saved a layout in the ScreenPad Layout Library, you can open it and use it any time you like. Objects remain in the positions and sizes in which they were saved in the layout.

You can "playback" a sequence of layouts during recording using ScreenPad Hotkeys, sequencing through layouts to present the information you want, at the right time, and in the right order. Right-click on the layout library to set hotkey properties. You can also change the sequence of layout appearance by simply dragging them to new locations in the Layout Library.

1 If ScreenPad is not open, select menu options View > ScreenPad or click the ScreenPad icon on the toolbar [pic]. The ScreenPad appears.

2 Click the Layout Library to open it [pic].

3 Double-click a layout to open it on your desktop. Alternatively, drag-and-drop it anywhere on the desktop. The layout opens, with all objects in proper placement.

Note: You cannot make changes to a layout and save it with the changes. However, you can make changes to a layout and save it as another layout.

4 The appearance and sequence of layouts during recording can be controlled using ScreenPad Hotkeys. This allows you to control how objects (such as titles or callouts) appear during the movie. For more information see ScreenPad Layout Hotkeys.

5 To change the sequence of layout appearance while sequencing through them with the hotkeys, simply drag individual layouts to new locations in the Layout Library. Layout’s position in the library controls the sequence in which they appear.

See also:

Creating and Saving Layouts

ScreenPad Layout Hotkeys

Creating and Saving Layouts

LayoutsYou can place one or more annotation objects on your desktop, then save their position and size as a Layout. The saved objects and layouts include any annotation text you have added. This is very handy for doing more than one "take" to get a scene right. After saving a layout, you can always call it up again from the ScreenPad Layout Library. And, you can use the ScreenPad hotkeys to "playback" a sequence of layouts during recording.

1 Place ScreenPad annotations where you want them for the scene. See also: Using ScreenPad Annotations.

2 When you have the position and size of objects exactly as you want them, click the Layout Library in ScreenPad [pic].

3 Right-click anywhere over an object or ScreenPad and select Save Layout.

4 A new layout is placed in the Layout Library.

5 You can rename the layout by clicking over the name and typing a new one.

6 You can change layout characteristics by changing the layout, then saving it as a new one.

See also:

Using ScreenPad Layouts

ScreenPad Layout Hotkeys

ScreenPad Layout Hotkeys

Show/Hide Layout Hotkey Hotkeys Select hotkey ScreenPad LayoutsYou can navigate easily between ScreenPad layouts using hotkeys. None of these hotkeys are defined by default, so if you want to use them, you must define them. Select hotkey sequences that will not interfere with other programs you may have operating and are unique in Camtasia (not the same ones used to operate Recorder).

This feature can be very valuable if you want to change layouts during a recording session. For example, you can start recording with no annotation layouts visible. Then, at a predetermined point during recording, use the Show/Hide Layout Hotkey to show the first layout. Then, using the Next or Previous Layout Hotkeys, you can cycle through a set of layouts that illustrate the action on screen in real time. Use the Show/Hide Layout Hotkey again to make them disappear.

To Select ScreenPad Hotkeys:

1 In ScreenPad, select a Layout Library.

2 Right-click over the Layout Library. The Layout menu appears.

3 Select ScreenPad Hotkeys…. The ScreenPad Hotkeys Dialog appears.

4 To change the hotkeys for any available option, place a checkmark in one or more boxes below CTRL, SHIFT, or ALT if you want to include them in your hotkey combination for the selected action.

5 Select another keyboard key from the drop-down box on the right. You can choose most keyboard keys here.

Note: Select hotkey sequences that will not interfere with other programs you may have operating and are unique in Camtasia (not the same ones used to operate Recorder).

The ScreenPad Layout Hotkeys are:

• Next Layout Hotkey. Use this hotkey to cycle forward through multiple layouts in the Layout Library individually until you have the one you want to use. Layouts appear ready-to-record on screen.

• Previous Layout Hotkey. Use this hotkey to cycle backward through multiple layouts in the Layout Library individually until you have the one you want to use. Layouts appear ready-to-record on screen.

• Show/Hide Layout Hotkey. Use this hotkey to toggle between showing and hiding the selected layout on screen.

Distributing Movies

Distributing Your Movie

Production Camtasia Producer Movie TSCCTo create a finished production for distribution, you will probably want to touch up your video captures in Camtasia Producer. Before you do, there are some things you should know about distribution methods, recorded movie quality and codecs, and distribution quality and codecs.

During Recording:

To get the best quality recording, use the TechSmith Screen Capture Codec (TSCC) as the recording codec and use uncompressed PCM audio. These are the default options for Camtasia, however, if they have been changed, you can change them back using menu choices Options > Preferences and selecting the AVI tab. See also: Options > Preferences > AVI for more details on setting configuration options.

During Production:

When you import all of the captured movies into Camtasia Producer, you can choose to leave the movie codec as TSCC (which means you will likely be required to distribute the codec with the movie) or you can change it to another codec or format as required by your users.

For more information on shipping the TSCC codec with your movie, see also: TechSmith Screen Capture Codec (TSCC).

TechSmith Screen Capture Codec (TSCC)

Windows codecs Codec TSCC-encoded movies TSCCTSCC stands for TechSmith Screen Capture Codec. It is a video encoder-decoder that takes advantage of the unique characteristics of desktop video and produces a superior quality movie at reasonable compression rates. It is the default method of encoding in Camtasia Recorder, which can easily be changed to any of the standard Windows codecs when recording. But we recommend TSCC as a high quality, lossless video codec that is especially well suited for desktop videos.

However, when using TSCC to encode a final production for distribution, you must also distribute the free codec to any users who will view the movie. There are no charges, royalties, or licensing requirements involved in distributing movies encoded with TSCC or with distributing the codec to others for viewing.

If you do not want to distribute your movie encoded with TSCC, we recommend you still use TSCC during capture with Camtasia Recorder. Also, select the uncompressed PCM audio format. Then, when the movie is produced in Camtasia Producer, select another codec and audio format for distribution (such as a standard Windows video codec, compressed audio, or a streaming file format). This approach trims the final file size while maintaining some of the quality of the original.

To make distribution of TSCC-encoded movies easier, we have created a codec installer and have included it on the Camtasia CD-ROM. It is also always available at our web site, . Look for the file named TSCC.EXE.

Copy TSCC.EXE onto the same media where your movie distribution resides and either have your installer run it at installation time or instruct the user to do so.

Note: You can also ship TSCC by "packaging" your video with it when you produce the movie in Camtasia Producer. For more information, see also: Pack and Show Your Movie.

Getting Help

Help Menu

Quick Help Evaluation Version Sales Information Register Camtasia Camtasia Support TechSmith WebUnder the Camtasia Help menu, you have the following options:

Quick Help... - Displays a simple dialog outlining the basic steps to make a Camtasia Recording.

Contents and Index - Opens Camtasia's Help table of contents.

Using Help - Opens the standard How to Use Windows Help system for the operating system you are using.

Tip of the Day - This selection displays the Tip of the Day. Remove the check mark in Show tips at startup to turn them OFF. Put a check mark there to show them each time Recorder is started.

Support… - Opens the Camtasia Diagnostics dialog, which will help you assemble the information needed by Camtasia Support Personnel. This will produce a file for you to send via e-mail to Camtasia Support. See also: Support (Help).

Check for Update - Launches your Internet Browser and goes to the update page on the TechSmith web site. This page allows you to download program updates.

Frequently Asked Questions - Launches your Internet Browser and goes to the Frequently Asked Questions page on the TechSmith web site. This page gives you information about SnagIt in FAQ format.

TechSmith Products - Launches your Internet Browser and goes to one of two selected product description pages on the TechSmith web site: SnagIt and DubIt.

TechSmith on the Web - Launches your standard Internet Browser and displays . From there, you can obtain support information or information of other TechSmith products.

About Camtasia… - Presents program version information. If you are using an Evaluation Version, this menu choice displays registration and information about the evaluation period.

Register Camtasia… - (Evaluation version only) Opens a 3-step dialog the allows you to purchase and register Camtasia.

Sales Information… - (Evaluation version only) Opens the Camtasia help file to additional information on how to contact TechSmith and buy our products, including information about international distributors.

Camtasia Capture Recovery Tool

AVI file WAV file Windows Explorer Recovery AVI RecoveryAudio and video streams are saved in temporary files and folders during a capture.

• The video stream is saved in a temporary AVI file with a name like _captureb42e35.avi.

• The audio stream (if any) is saved in a temporary WAV file with a name like _captureb42e35.wav.

After a successful capture, these files are converted to the .AVI file name you have chosen.

If the capture is interrupted by system failure (the disk becomes full, for example), then the temporary files remain on your system. You can recover these files using the Camtasia Capture Recovery Tool. The program, Recovery.exe, is located in you Camtasia installation directory and must be started from there to recover files.

To recover interrupted Camtasia Recorder sessions:

1 Find the temporary capture files. They are located in the folder specified in Options > Preferences > Program.

Note: If you cannot locate these files, use Windows Explorer to search for *_capture*.avi. You can find audio files by searching for *_capture*.wav.

2 Record an AVI recovery reference file to recover the capture video stream. See Record Reference File for details.

3 Go to the Camtasia installation directory and find the file named recovery.exe. Double-click this file to start the Camtasia Capture Recovery Tool.

4 Under Select AVI recovery reference file, click [AVI File…] and select the reference file created in step 2.

5 Under Select temporary capture files to recover, click [AVI File…] and select the temporary AVI file you found in step 1. If you are recovering an audio track as well, click [WAV File…] and select the temporary WAV file you found in step 1.

Note: If you want to just recover the audio stream, you only need to specify the temporary capture WAV file.

6 Click [Recover…]. The Save As dialog asks you to select a name and folder for the recovered files.

7 Program messages are shown in the Status box. It should eventually show "File Recovery Successful!"

Note: When you have verified you have useful files that can be reassembled in DubIt, you can delete the temporary files to save disk space.

Note: The Recovery tool does not modify either the temporary capture files or the recovery reference file.

Support (Help)

Support Support@ CamtasiaClicking Support from the Help menu displays detailed setup and diagnostic information about Camtasia and your system. This information can help you and the Camtasia support staff troubleshoot problems you might have.

You may be asked to send or fax a copy of the diagnostics when you report a problem that is not fixed quickly and easily. If you are asked for diagnostics, perform the following:

1 Click Help > Support on the Camtasia main screen.

2 Click [Copy to Clipboard].

3 If you want to send an e-mail report of the problem to Camtasia support, compose a message with the following information:

• Your name, e-mail address, fax and phone numbers

• A description of the problem and what you were trying to do

• Paste the text from the Camtasia Diagnostic Information box on the Support window.

When complete, send the message to support@.

4 Alternatively, click [Save to File…] to save the diagnostic information in a separate text file. Then, attach the file to your e-mail and send it to support@ or print the information and fax it to Camtasia support, along with the other information requested in step 3.

5 Click [OK] to close the Camtasia Support window.

Camtasia Support

Support TechSmith Corporation Technical Support Camtasia Support HelpYou can contact our Technical Support department in one of the following ways:

|E-mail: |support@ |

|Fax: |(517) 333-1888 |

|Phone: |(517) 333-2100 |

|Mail: |TechSmith Corporation |

| |Attn.: Camtasia Support |

| |PO Box 4758 |

| |East Lansing, MI 48826-4758 |

If you are reporting a problem with Camtasia, please provide the following information:

• The product name and version number (Camtasia Recorder, version 3.0).

• Your name, e-mail address, fax number and phone number.

• A Diagnostic Information printout (using Help > Support…).

• A description of the problem, and what you were trying to do when the problem occurred.

Legal and Miscellaneous

Software License Agreement

License Software License AgreementSee the file license.txt in the Camtasia install folder for the Software License Agreement.

Acknowledgments

Agreement TechSmith Corporation Shareware Professionals Association ASP OmbudsmanTechSmith Corporation provides this manual "as is", makes no representations or warranties with respect to its contents or use, and specifically disclaims any expressed or implied warranties of merchantability or fitness for any particular purpose. TechSmith Corporation reserves the right to make changes to the content of this manual, at any time, without obligation to notify any person or entity of such changes.

The software described in this document is furnished under a license agreement. The software may be used or copied only in accordance with the terms of the agreement. It is against the law to copy the software on any medium except as specifically allowed in the license agreement.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, without the express written permission of TechSmith Corporation.

Copyright © 2000, 2001 TechSmith Corporation.

All Rights Reserved. Printed in the United States of America.

Trademarks:

TechSmith is a registered trademark and SnagIt is a registered trademark of TechSmith Corporation.

Camtasia and DubIt are trademarks of TechSmith Corporation.

Microsoft, MS, Windows, Word and MS-DOS are registered trademarks and Windows NT is a trademark of Microsoft Corporation.

All other brands and product names referred to in this manual are the trademarks or registered trademarks of their respective holders.

Association of Shareware Professionals

TechSmith Corporation is an Approved Vendor and a member of the Association of Shareware Professionals (ASP). ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a shareware-related problem with an ASP member by contacting the member directly, ASP may be able to help. The ASP Ombudsman can help you resolve a dispute or problem with an ASP member, but does not provide technical support for members’ products. Contact the ASP Ombudsman at:

Ombudsman, Michael Marshall

Association of Shareware Professionals

157-F Love Avenue

Greenwood, IN 46142

E-mail: omb@asp-

About TechSmith Corporation and Our Products

Other TechSmith Products Contact Information William Hamilton DubIt Company Overview SnagIt Registered Trademarks Registered Trademarks:TechSmith CorporationCompany Overview

For the latest information, see .

TechSmith Corporation develops practical screen capture software and video screen recording & production tools to capture and manipulate images, video and voice. Applications for our products range from technical documentation and software demonstrations to developing streaming content for web sites and broadcasting desktop activity over the Internet.

SnagIt, our popular advanced screen capture software introduced in 1990 has a large and loyal following. It has become "The Screen Capture Standard" in the Windows world.

Camtasia, our multimedia video screen capture and production tool was unveiled at Fall Comdex, 1999. It has quickly established itself as a must have tool for people who want to capture the action from the Windows desktop and save it in industry standard video formats.

Free trial versions of all of our products are available from our web site as well as from hundreds of other sites around the globe.

Established in 1987 and located in East Lansing, Michigan, USA, TechSmith initially provided custom Windows software development and LAN remote access consulting and solutions. The shift to product development was completed in the early 1990s.

TechSmith is a privately held Michigan corporation rated 3A1 by Dun & Bradstreet. Our Duns Number is 60-672-4680. TechSmith holds several registered trademarks and domain names, including , , and . TechSmith's co-founder and president is William Hamilton.

Contact Information

U. S. Postal Service Address

TechSmith Corporation

P.O. Box 4758

East Lansing, MI USA 48826-4758

UPS / FedEx Address

TechSmith Corporation

1780 E. Grand River Ave.

East Lansing, MI USA 48823

Telephone

Voice:+1 517 333-2100

Fax:+1 517 333-1888

E-mail

Sales: sales@

Marketing: marketing@

Technical support: support@

Personnel / Job Queries: personnel@

Website, FTP or connectivity issues: webmaster@

Other TechSmith Products

1. SnagIt®

SnagIt is the screen capture, print and file program for Microsoft Windows. Users can capture an entire screen, a portion of the screen or a single window. SnagIt sends the captured area to the Windows Clipboard, printer or a file for later use in other applications, such as word processors. SnagIt is a fully functional Windows DDE server so it may be incorporated into custom or commercial applications for printing.

An evaluation version is available at

Send email requests for additional information to snagit@.

2. DubIt™

DubIt is a multimedia tool which lets you easily add audio to movie clips and images. Unlike video editors and presentation authoring products, DubIt adds audio in real-time as you watch the movie or image.

With DubIt, it is easy to narrate a video clip and synchronize your voice with the video. DubIt is the perfect tool to quickly add voice annotation and sound effects to a movie or image.

DubIt uses a familiar VCR-style "Media Player" interface that anyone can use. There is no complicated setup or long learning curve with DubIt. Simply open a movie or image and hit the record button. Just because DubIt is small and simple does not mean it is not powerful.

An evaluation version is available at .

Send email requests for additional information to dubit@.

TechSmith and SnagIt are Registered Trademarks of TechSmith Corporation. Camtasia and DubIt are trademarks of TechSmith Corporation.

About DubIt

DubItDubIt™ is a multimedia tool which lets you easily add audio to movie clips and images. Unlike video editors and presentation authoring products, DubIt adds audio in real-time as you watch the movie or image.

With DubIt, it is easy to narrate a video clip and synchronize your voice with the video. DubIt is the perfect tool to quickly add voice annotation and sound effects to a movie or image.

DubIt uses a familiar VCR-style "Media Player" interface that anyone can use. There is no complicated setup or long learning curve with DubIt. Simply open a movie or image and hit the record button. Just because DubIt is small and simple does not mean it is not powerful.

An evaluation version is available at .

Send email requests for additional information to dubit@.

Panning the Video Capture Area

Video Capture AreaThis feature is available for any video Capture input setting, but it is most useful if you select Capture > Input > Region for your video capture. You can use this feature to "pan" the video capture area across the screen while recording or during pause. Follow these general steps:

1 Select Capture > Input > Region. This sets Camtasia to expect a capture region of the screen to be defined.

2 Select Effects > AutoPan.

3 Click the red record button to start Camtasia in pause mode. The cursor changes to a crosshair pointer for you to define the region of your computer screen to be captured in the video. This defined area becomes a highlighted rectangular border that can be "panned" across the screen before, during, and after video capture. The rectangle flashes during capture but not while paused.

4 Click the record button again to start recording.

5 Begin the screen actions you want to capture.

Note: Use the Pause button to pause the movie and move to a new region for capture. Click the record button again to resume recording.

6 Click the stop button to end the new capture sequence. The Save Movie File As Dialog appears to save the file.

Interleave Audio and Video

Interleave Interleave Audio and VideoInterleaving the audio and video data allows it to playback smoothly when the movie file is played from a slower device (such as a floppy disk, or CD-ROM). The only reason to disable interleaving would be to speed up movie file "Rendering" time.

The box for Interleave audio every X video frames specifies how much to interleave audio and video data. The lower the number specified for "X," the smoother the playback will be.

Note: Interleaving every 1 video frame is full interleaving which always results in the smoothest playback. Interleaving with higher numbers of video frames results in progressively less interleaving and potentially less smooth playback. However, the movie file may be smaller with less interleaving. This can be an important consideration for long movies with large pixel dimensions and detail.

Effects > Highlight and AutoHighlight

AutoHighlight HighlightYou can create an outline effect around object being captured with Camtasia Recorder to call attention to that object. There are two methods available:

Highlight: Allows you to select a static area of a window or the whole window to have a highlight rectangle around it. As you record the movie and move the cursor on screen, the highlight area does not change.

AutoHighlight: You can turn this feature ON before capturing, then while recording, the highlight is applied to areas of windows or whole windows over which the cursor passes. The highlight area changes dynamically with the cursor position.

To Use the Highlight Feature

1 Select menu options Effects > Settings and then select the Annotation tab.

2 In the Highlight section, adjust the line width (in pixels) and color. Click [OK] to apply the options.

3 Select menu options Effects > Highlight to apply a static highlight area. The cursor becomes a finger-pointer and allows you to select the desktop element you want to apply the highlight to.

4 When the highlight is applied to the area you want highlighted, click once. The area is selected and the highlight is applied.

5 Record your video. The highlight area is included in the movie.

6 Select Effects > Highlight or the Highlight icon again to disable (hide) the highlight effect.

To Use the AutoHighlight Feature

Note: You can use Capture > Pause/Resume to control exactly when and where the AutoHighlight effect appears.

1 Set highlight options as shown in steps 1 and 2 above.

2 Select menu options Effects > AutoHighlight to apply a dynamic highlight area.

3 Begin recording as always. Notice that when you move the cursor about in the area being captured, the highlight area is dynamically applied to different desktop elements. These highlighted elements are included in the movie.

Glossary

Add Caption

This option turns ON the Caption Effect. A checkmark appears next to the menu item when the option is ON. This allows you to type a caption to be affixed to the video being captured. Set options for this effect in Effects > Settings > Annotation.

Add Time/Date

This option turns ON the Time and Date Annotation Effect. A checkmark appears next to the menu item when the option is ON. The time and date are affixed to the video being captured. Set options for this effect in Effects > Settings > Annotation.

Add Watermark

This option turns ON the Watermark Effect. A checkmark appears next to the menu item when the option is ON. This allows you specify an image to be used as a watermark in the video being captured. Set options for this effect in Effects > Settings > Watermark.

Audio Attributes

This box lists the audio format attributes. The attributes are (from left to right):

• Sample Rate in kHz - Number of audio samples per second, or the fidelity of the audio recording.

• Sample Size in Bits - How much data to record for each audio sample.

Note: An 8 Bit sample size may be fine for voice recording. Since using a 16 Bit sample size doubles the size of the audio data you record, you should only use it if you must have the highest quality recording.

• Mono or Stereo - The number of audio channels to record. Mono means record one audio channel, Stereo means record two audio channels (right and left).

Note: Stereo is only useful if you are recording with a stereo microphone. Since using a Stereo audio format doubles the size of the audio data you record, you should only use Stereo if you know you are recording with a stereo microphone.

• Data Rate - The data throughput of the audio stream in kilobytes per second (kbps).

Note: For most of the attributes, the higher the number, the higher the quality of the recording will be and the larger the movie file will be.

Audio Format: Format

This box lists the audio format type. Choose from one of the many audio formats listed on the drop-down list.

Audio Format: Name

This box lists the name, if there is one, of the Audio Format you select or save. This allows you to choose an audio format using a simple understandable name. There are usually several names already assigned. For example, on most computers you can select Telephone Quality in the Name list box, instead of the more cryptic 11.025kHz, 8 Bit, Mono in the Attributes list. Note that the two are the same because they have the same audio format and attributes.

You can add an audio format name using the [Save As…] button and remove an existing audio format name using the [Remove] button.

Audio-Video Interleave (AVI)

AVIThis is a computer video specification by Microsoft Corporation for use on PCs. AVI is one of several motion-oriented file formats for computing and is the one most often associated with PCs and Microsoft Windows.

.AVI is actually a rapidly moving series of captured bitmaps that shows movement of screen elements. The size of video captures depends on the size of the window being captured, the speed at which the "frames" of video are captured, and the duration of the video capture. To limit file size, try lowering the frame rate, eliminating extraneous elements on the captured window, and keeping the length of the capture short.

AutoHighlight

This option turns ON the Caption Effect. A checkmark appears next to the menu item when the option is ON. This allows you to add a highlight border to areas of the capture (typically a window, dialog, or box) as the cursor passes over them during capture. An outline area is added during capture. The width and color of the highlight line are set in the Effects > Settings > Annotation.

AutoPan

AutoPan allows the capture area to follow the mouse position on screen during capture. Use this when you want to capture a smaller area of a screen where the action is and ignore the inactive areas. This can help limit file size and help to focus attention.

AutoZoom

Select this effect to AutoZoom during recording. This option sets up an automatic zoom in or zoom out on the action. Set the zoom direction and amount using Effects > Settings > Zoom.

Emboss

Use this option to create an embossed underlay watermark. This can be used to create a watermark effect similar to those used by commercial television stations, where the "bug" appears translucent and slightly raised.

Emboss Direction

Choose the embossing "direction." The direction refers to a shadow effect on the embossed image and a rough indication of the direction of a light source. Use the [Preview] button to see how the direction changes the embossing effect.

Emboss Depth

Changes how pronounced the embossing effect appears.

Hide Cursor

The cursor is hidden during video capture. This selection toggles with Show Cursor.

Highlight

This option turns ON the Highlight Effect. A checkmark appears next to the menu item when the option is ON. This allows you add a fixed highlight border to a selected area of the capture (typically a window, dialog, or box). An outline area is added during capture. The width and color of the highlight line are set in the Effects > Settings > Annotation.

Highlight Clicks

When this option is ON during video capture, mouse clicks result in a circle effect being applied to the area the click occurred. This helps call attention to the action of clicking and can be supplemented with the audio click effect.

Highlight Cursor

When this option is ON during video capture, the cursor has a highlight area applied around it. This helps call attention to the movement of the cursor.

Highlight Cursor & Clicks

When this option is ON during video capture, two effects are applied to the mouse cursor: a highlight area is applied around the cursor and whenever the mouse is clicked, a circle effect appears in the area of the click. This helps call attention to the movement of the cursor and the action of clicking.

Horizontal Offset

Changes the horizontal offset of the watermark image from the edge of the movie frame. You can use this option to refine watermark positioning. Use the [Preview] button to see the offset effect.

Image Path

This must be the complete Windows path and file name for the watermark image file. The watermark image file can be one of the following file formats: .BMP, .GIF, or .JPG.

Image Scale Slider

Changes how big the watermark image appears relative to the movie frame size. 100% means the watermark image completely covers the movie frame.

Keep aspect ratio when scaling

Use this option to maintain horizontal and vertical size aspect ratio when scaling the watermark image. When selected, the watermark appears normal, not stretched or distorted. Default setting is ON.

Layout Library

Layout libraries contain collections of annotation objects that you have placed on screen and saved as a layout, using the right-mouse button menu choice Save Layout. These libraries are shown in ScreenPad under the [pic] icon.

The Layout Library is always the first library listed in the ScreenPad window. There can only be one layout library open at any time; however, multiple layouts may be placed on the desktop at one time. You can create new Layout Libraries as needed by using the right-click menu Layout Library > New.

Object Library

Object libraries contain individual annotation objects that you have added to the library by import or by drawing. These libraries are shown in ScreenPad under the [pic] icon.

Overlay Watermark

Use this option if you want your watermark to be an opaque overlay on the produced movie. This produces a solid image that blocks out the view of any action occurring underneath.

Positioning Cluster

The nine-button image cluster allows you to position (or anchor) the watermark image in a region of the movie frame.

Preview Button and Screen

Click the [Preview] button to see a live preview of the watermark feature. Note that you can change the watermark options and watch the effect immediately in the preview window.

Prompt Before Capture

Place a check mark in the box if you want Camtasia Recorder to prompt you for the caption before recording. You can either accept the one previously entered or type a new one.

RealVideo File

For details on RealNetwork’s RealVideo (RM) file Streaming Format, refer to the Web Site .

Record Reference File

An AVI recovery reference file is used to tell Camtasia Capture Recovery Tool the video format to use when recovering the video stream, since that information is not in the temporary capture AVI file. The reference file is a short AVI file that uses exactly the same settings that were used during the failed capture. The video codec, screen color depth, and frame rate must be exactly the same as during the failed capture. If necessary, the AVI recovery reference file width and height can be larger than during the failed capture (if you cannot remember the exact dimensions, for example).

Note: The recovery reference file does not need to contain an audio stream.

Show Cursor

The cursor is shown during video capture (the default selection). This selection toggles with Hide Cursor.

System Tray

An area in the lower right corner of the taskbar in Windows 95/98, Windows 2000, and Windows NT 4.0 or later. Applications displayed in the system tray are usually background tasks that are activated by the system clock or application specific hotkeys.

Transparent Color

The transparent color you select must match exactly the areas you want to be transparent in the watermark image. Use the [Preview] button to verify that the transparent effect works. (The preview will not show it as transparent until the right color is selected.)

Underlay Watermark

Use this option if you want to show the watermark as a translucent underlay under the movie. This option allows any action that occurs under the watermark to show through.

Use smooth interpolated scaling

This option applies a smooth scaling algorithm to the watermark image for less jaggedness. Default setting is ON. Turn this option OFF if it interferes with the transparency of your watermark.

Use Transparent Color

Use this option to make part of the watermark image transparent. When selected, the areas of the watermark image that match the transparent color are hidden so that the movie shows through the watermark. You can use a transparent color to create watermark images that have any arbitrary non-rectangular shape (for example, a circle or an arrow).

Vertical Offset

Changes the vertical offset of the watermark image from the edge of the movie frame. Use the [Preview] button to see the offset effect.

Zoom In

Select this option to zoom in on the area you are recording. This allows you to enlarge a portion of the screen or application area (and therefore capture a smaller area). The percentage of zoom is indicated on the status display.

Zoom Out

Select this option to zoom out on the area you are recording. This allows you to reduce a portion of the screen or application area (and therefore capture a larger area). The percentage of zoom is indicated on the status display.

Zoom To

Select this option to set the zoom back to 100 percent. Click the arrow to the right of the icon to zoom to a specific size, which you can select from the menu that drops down.

Zoom Undo

Select this option to undo the zoom setting and return to the previous one selected.

Index

800x600 8

capturing 8

About DubIt 57

About TechSmith Corporation 56

About TechSmith Corporation and Our Products 56

Acknowledgments 55

Add Caption 34

Add Time/Date 34

Adobe Premiere 40

Advanced Hotkeys 39

Agreement 55

Annotation 26, 33, 42, 43, 44

Edit 44

Annotation Catalog 42

Annotation Effects 26

Annotation Text 44

Annotation Toolbar 25, 34

Annotations 42, 43, 44

Applying Effects 25

ASP Ombudsman 55

Association 55, 56

Shareware Professionals 55

Audio 28

Audio Capture Device 36

Audio Effects 28

Audio Format Dialog 37

Audio Recording Failure 18

Audio Setup 28, 37

Audio Toolbar 25, 34

Audio-Video Interleave 61

AutoHighlight 26, 34, 59

Automation 24

AutoPan 32, 35

AutoPan Hotkey 39

AutoZoom 31, 32, 35

AVI 61

AVI Capture Rate 38

Set 38

AVI file 52, 53

AVI Playback Rate 38

Set 38

AVI Player 13

AVI Preferences 36

AVI Recovery 53

Background Color 27

Background Image 43

Bitmap images 43

CamRec.exe 24

Camtasia 53, 54

Support 53

Camtasia Capture Recovery Tool 52

Camtasia CD-ROM 7

Camtasia Player 13

Camtasia Producer 50

Camtasia Recorder 7, 8, 19, 36

Camtasia Recorder Effects menu 25

Camtasia Recorder hotkeys 38

Camtasia Recorder View Menu 24

Camtasia Recovery Tool 52

Camtasia Region Input 15

Camtasia Setup 8

Camtasia Support 52, 54

Camtasia Video 15

Uses 15

Camtasia Video Capture Device 39

Caption Options Dialog 27

Capture 39, 40

Capture Automation 24

Capture Input Options 19

Capture Menu 20, 22

Capture Menu > Input 19, 22

Capture Menu > Input Options 22

Capture Menu > Output Options 22

Capture Menu > Quick Capture 23

Capture Menu > Record Options 20

Capture Options 40

Capture Single Frames 23

CD-ROM 8, 58

Center zoom effect 31

Change 38

Hotkey Combination 38, 39

Codec 16, 50

Command Option 24

Company Overview 56

Configuring 12

Camtasia Recorder 12

Contact 55

ASP Ombudsman 55

Contact Information 56

Control Panel 17

Creating 42, 43

New 42, 43

New Annotation 42

Creating and Saving Layouts 48

Creating New Annotations in the ScreenPad 42

Cursor 29

Cursor Effects 29

Cursor Setup 29

Cursor Setup Dialog 29

Cursor Toolbar 25, 34

Define a Fixed Region 20

Delete a Recording 22

Distributing Your Movie 50

Drawing Tools 45

Drop Shadow 27

DubIt 56, 57

Edit 44

Annotation 44

Edit Image 44

Edit Text 45

Editing Annotation Images 44

Editing Annotation Text 44

Editing Annotations 44

Effects 25, 26, 28, 29, 30, 31

Effects > Highlight and AutoHighlight 58

Effects > Settings > Annotation 26

Effects > Settings > Audio 28

Effects > Settings > Cursor 29

Effects > Settings > Watermark 30

Effects > Settings > Zoom 31

Effects Menu 28

Effects Tabbed Dialog 30

Evaluation Version 52

F10 38

F9 21, 38

Faster Compression 11

File 36, 37

select 36, 37

File Name 36, 37

Ask 37

File Preferences 36

Fixed File Name 36

Fixed Region 20, 22

Font Style 27

Frames/second 8

Full Duplex 17

Full Screen 14

General Suggestions 16

Getting 7

Started 7

Getting Help Menu 52

Getting Started 7

Help 54

Help Menu 52

Hide Hotkey 39

Hide/unhide 24, 39

Hides 24

Recorder 24

Highlight 34, 58, 59

Hotkey 19, 39

Hotkey Combination 38

Change 38

Hotkey Preferences 38

Hotkeys 31, 38, 39, 47, 48, 49

ScreenPad 47

How Windows Video Works 15

Image Editor 43, 44, 45

Image Editor Drawing Tools 45

Images 44

Import Image dialog 43

Import Images 43

Importing Images into the ScreenPad 43

Input Options 19, 22

Setting 19

Insert 8

Camtasia CD-ROM 8

Installing Camtasia 8

Interleave 36, 58

Interleave Audio and Video 58

Keyboard Sound Effects 28

Keyboard Sounds 28

Layout Library 48

Layouts 47, 48, 49

License 55

License.txt 55

Live 39

Live Output 22, 23, 39, 40

Live Output Feature Description 40

McGowan 16

Media Player 57

Microsoft Windows Sound Recorder 17

Mouse Sound Effects 28

Movie 50

Movie viewing 13

Movies 13, 14, 19

Restart 13

NetMeeting 22

New Annotation 42

Create 42, 43

New Object 43

New Object dialog 42

Noisy Recordings 17

Object Library 42, 44

Select 44, 45

Opaque 29

Options 38, 39, 40

Options > Preferences > AVI 36

Options > Preferences > File 36

Options > Preferences > Hotkeys 38

Options > Preferences > Live 39

Options > Preferences > Program 40

Other TechSmith Products 57

Output Folder 36

Output Options 22

Overview 15, 16

Pan Effect 31

Pan Effects 31

Panning 31

Panning the Video Capture Area 58

Pause 21

Recording 21

Pause a Recording 21

Pause Icon 13

Performance Factors during Recording 8

Performance Improvement TIPS 12

Performance Notes 11

Performance Results Graphs 10

Performance Results Tables 9

Play AVI 13

Play Icon 13

Player 13, 14, 57

Preferences 36, 37, 38, 39, 40

Preferences AVI Tab 37

Press 33

ScreenDraw hotkey 33

Production 50

Program 40

Program Preferences 40

Program View Options 24

Quality Audio Recordings 17

Quick Capture 16, 23

Quick Help 52

RealVideo File 63

Record 7, 21

Start 21

Record Audio 18, 28

Record Options 20

Record video captures 19

Record/Pause hotkey 21, 38

Record/Pause hotkey F9 7

Recorder 24

Hides 24

Recording 21, 22

Delete 22

Pause 21

Stop 22

Recording Video 19

Recording Volume 17

Recovery 53

Region 22

Register Camtasia 52

Registered Trademarks 56, 57

TechSmith Corporation 56, 57

Restart 13

movie 13, 14

Run Hidden 24

Sales Information 52

Save 37

Audio Format 37

Save As 37

Save Movie File As Dialog 19, 58

Saving Layouts 48

Screen 22

ScreenDraw 38

ScreenDraw Annotation 33

ScreenDraw Hotkey 33, 38

ScreenPad 25, 42, 43, 44, 48, 49

ScreenPad Hotkeys 47

ScreenPad Layout Hotkeys 48

ScreenPad Layouts 47

Using 47

Select hotkey 48

Selecting 13, 36, 39, 42, 44

Audio Capture Device 36

AVI 36

Camtasia Video Capture Device 39

Live 39, 40

Object Library 43, 44, 45

Play 13

Semi-translucent 29

Set 38

AVI Capture Rate 38

AVI Playback Rate 38

Set Capture Input Options 19

Set Record Level 17

Setting and Applying Effects 25

Setting Capture Input 19

Setting Cursor Effects 29

Setting Effects 25

Settings 26, 27, 28, 29, 30, 31

SETUP.EXE 7, 8

Shadow Color 27

Shareware Professionals 55, 56

Association 55

Show Time/Date 26

Show/Hide Layout Hotkey 49

Silent Recordings 17

Single Frame capture 23

Single Frames 23

Capture 23

Slider Control 13

SnagIt 56, 57

Software License Agreement 55

Standard hotkeys 38

Start 21, 38

Recording 21

ScreenDraw 38

Start a Recording 21

Start Camtasia 19

Starts/resumes 24

Stop 22

Recording 22

Stop a Recording 22

Stop Hotkey 38

Stop hotkey F10 22

Support 53, 54

Camtasia 53

Support (Help) 53

Support@ 54

System Requirements 8

Technical Support 54

TechSmith 52

Web 52

TechSmith Corporation 54, 55, 56

Registered Trademarks 56

TechSmith Screen Capture 16

TechSmith Screen Capture Codec 36, 50

TechSmith Screen Capture Codec (TSCC) 50

56

Temporary File Folder 11, 41

Text 44, 45

Text Color 27

Time-lapse 23, 38

setting 23

Time-lapse Capture 36, 38

Time-lapse Capture Setup Dialog 38

Time-lapse Setup 38

Tinny Sounding Recordings 17

Toolbar 25, 34, 35

Annotation 34

Audio 34

Cursor 34, 35

Zoom 35

Toolbar View Options 25

Tools 46

Translucent 29

Transparency Color 46, 47

Transparent Background 27

TSCC 12, 41, 50, 51

TSCC.EXE 50

TSCC-encoded movies 50

Uses 15, 16

Camtasia Video 15

TechSmith Screen Capture 16

Uses of Camtasia Video 15

Using Camtasia Producer 15

Using Live Output 39

Using ScreenDraw 33

Using ScreenPad Annotations 42

Using ScreenPad Layouts 47

Using the Annotation Catalog 42

VCR-like player 13

Video Capture Area 58

Panning 58

Video Capture Overview 15

Video Options 36

Video Quality Tips 16

Video Setup 36

View Menu 24

View Menu > ScreenPad 25

Watermark 30, 31, 34

Watermark Effects 30

WAV file 52, 53

Web 52

TechSmith 52

Welcome 7

Welcome to Camtasia Recorder Help 7

William Hamilton 56

Windows codecs 50

Windows Explorer 53

Windows Media Format 16

Word Wrap 27

World Wide Web 15

Zoom 31, 35

Zoom and Pan Effects 31

Zoom Effects 31

Zoom Effects Setting 31

Zoom Hotkeys 32

Zoom In Hotkey 39

Zoom Out Hotkey 39

Zoom Toolbar 25, 35

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download