Platform: DBALL/DBALL2 Firmware: TL1 Rev.: 20150430
Platform: DBALL/DBALL2 Firmware: TL1
Rev.: 20150430
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
Door lock and transponder override firmware for specific Toyota, Lexus, Scion and Pontiac vehicles. It is compatible with models that use the RX/TX immobilizer lines at key switch and with select PTS models.
WARNING - No takeover feature is available for Push-to-Start vehicles. - If there is no immobilizer, the module will not work (that also includes door lock controls).
Index
Vehicle Application Guide................................................................................................................................................ 02
OEM Remote Starter Detection....................................................................................................................................... 04
Installation Type 1.............................................................................................................................................................................. 05 Wiring Reference Chart - Type 1..................................................................................................................................... 06 Type 2.............................................................................................................................................................................. 07 Type 2 with T-Harness TLTH1......................................................................................................................................... 08 Wiring Reference Chart - Type 2..................................................................................................................................... 09 Type 3.............................................................................................................................................................................. 10 Type 3 with T-Harness TLTH1......................................................................................................................................... 11 Wiring Reference Chart - Type 3..................................................................................................................................... 12 Type 4.............................................................................................................................................................................. 13 Wiring Reference Chart - Type 4..................................................................................................................................... 14 Type 5.............................................................................................................................................................................. 16 Wiring Reference Chart - Type 5..................................................................................................................................... 17 Type 6.............................................................................................................................................................................. 18 Wiring Reference Chart - Type 6..................................................................................................................................... 19
Programming Module Programming
Type 1 (Key-type vehicles)................................................................................................................................. 20 Types 2 & 3 (PTS-type vehicles)........................................................................................................................ 21 Type 4 (Key-type vehicles without CAN)............................................................................................................ 21 Type 5 (PTS-type vehicles without CAN)........................................................................................................... 22 Type 6 (PTS-type Toyota Prius).......................................................................................................................... 22 Module Reset................................................................................................................................................................... 23 Hard Reset....................................................................................................................................................................... 23 Feature & Option List....................................................................................................................................................... 24 Feature Programming...................................................................................................................................................... 24
LED Diagnostics & Troubleshooting................................................................................................................................. 25 Limited One-Year Consumer Warranty............................................................................................................................ 26
Quick Reference Guide................................................................................................................................................... 27
? Toyota and Lexus are registered trademarks and property of their respective companies.
? 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: TL1
Vehicle Application Guide
Rev.: 20150430 Page 2
The following table lists the vehicles and features which are compatible with this product. The number assigned to each year allows you to determine which installation type should be used for your vehicle.
2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 PK-Immobilizer Bypass-Data No Key Req'd DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Hatch Glass Release DL-Trunk / Hatch Release EIPS RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Driver Door Pin SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin SS-Factory Alarm Trigger Monitoring ST-Brake Status (foot brake) ST-Hand Brake Status ST-Ignition Status
Vehicles
Lexus ES 330 ES 350 (Smart Key) GS 300 (Smart Key) GS 350 (Smart Key) GS 430 (Smart Key) GS 450h (Smart Key) GS 460 (Smart Key) GX 470 IS 250 (Smart Key) IS 350 (Smart Key) IS F (Smart Key) LS 430 LS 460 (Smart Key) LS 600h (Smart Key) LX 470 RX 330 RX 350 RX 400h Pontiac Vibe Vibe Scion tC xB xD
Legend: D: Data-to-Data (D2D) only ?: D2D & Wire-to-Wire (W2W)
444
?
333333
? ?????
5
?
55
?
55
?
55
?
5
?
4444444 ?
555
?
555
?
5
?
444
?
55
?
5
?
44444 ?
444
?
444
?
444
?
11 4
? ????? ?
444444 111 111
AV: Horn & Lights Controls DL: OE Door Lock & Alarm Controls EIPS: Engine Idle Protection System PK: Transponder & Immobilizer Override RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status
? ? ????? ? ?????
? ? ? ? ? ? ?D? ? ?
? ? ? ? ?D? ? ? ? ? ? ? ?D? ? ? ? ? ? ? ?D? ? ?
Note: Keyless and Smart-Key will remain functional during remote start. - No takeover feature is available on Push-to-Start vehicles. - If equipped, the OE remote starter must be removed before installation. See page 4 for more information.
Go to the next page to see the Toyota Vehicle Application Guide.
? 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: TL1
Vehicle Application Guide
Rev.: 20150430 Page 3
2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 PK-Immobilizer Bypass-Data No Key Req'd DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Hatch Glass Release DL-Trunk / Hatch Release EIPS RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Driver Door Pin SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin SS-Factory Alarm Trigger Monitoring ST-Brake Status (foot brake) ST-Hand Brake Status ST-Ignition Status
Vehicles
Toyota
4Runner
44444444 ?
Avalon
44444
?
Avalon (Smart Key)
5555
?
Camry
11111
? ?????
?
D? ? ? ? ?D? ?
Camry
4444 ?
Camry (Smart Key)
33333
? ?????
? ?D? ? ? ? ?D? ?
Camry Hybrid
33333
? ?????
? ?D? ? ? ? ?D? ?
Corolla
11
? ?????
?
D? ? ? ? ?D? ?
Corolla
4444
?
Corolla (Smart Key)
22222
? ?????
? ?D? ? ? ? ?D? ?
FJ Cruiser
444
?
Highlander
111
? ??????
D? ? ? ? ?D? ?
Highlander
4444
?
Highlander (Smart Key) 3 3 3 3 3 3
? ??????
?D? ? ? ? ?D? ?
Highlander Hybrid
333333
? ??????
?D? ? ? ? ?D? ?
Highlander Hybrid
44
?
Land Cruiser
44444 ?
Land Cruiser (Smart Key)
555
?
Matrix
11
? ?????
D? ? ? ? ?D? ?
Matrix
4444
?
Prius (Smart Key)
666666
?
RAV4
11111
? ?????
D? ? ? ? ?D? ?
RAV4
44
?
RAV4 (Smart Key)
2222
? ?????
?D? ? ? ? ?D? ?
Sequoia
444
?
Sienna
4444444
?
Solara
444444
?
Tacoma
444444
?
Tundra
4444
? ?????
D? ? ? ?
D? ?
Venza
4
?
Yaris
444444
?
Note: Keyless and Smart-Key will remain functional during remote start.
- No takeover feature is available on Push-to-Start vehicles. - If equipped, the OE remote starter must be removed before installation. See page 4 for more information.
Key Type
Some Toyota 2010+ models have different encryption types. Please look at your key blade and identify the markings. A dot "." means the vehicle is compatible with TL1 firmware. "G" or "H" indicates the vehicle is not compatible with this firmware.
Standard Key
G-stamped keys
For vehicles with G-stamped key, see TL4, TL5 or TL7 firmware. TL1 works only with standard key.
H-stamped keys
For vehicles with H-stamped key, no solution is available at this time. TL1 works only with standard key.
H
? 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: TL1
OEM Remote Starter Detection
Rev.: 20150430 Page 4
How to Know if the Vehicle is Equipped with an OEM Remote Starter
1- An "ENGINE STARTER" sticker should be on the remote.
2- Remote start the OEM remote starter: Press the remote control's lock button twice within 2 seconds, then press and hold the lock button for 3 seconds.
The parking lights flash after 3 seconds. The engine starts and the parking lights flash repeatedly for 20 seconds.
Press & Hold
x2 &
for 3 seconds
ENGINE
STARTER
If the Vehicle is Equipped with an OEM Remote Starter
If the vehicle is equipped with an OEM remote starter, the DBALL LED will start flashing orange to indicate its detection. To skip bypass and use convenience only, press the programming button 5 times.* The reason for this is to allow aftermarket security to be installed while keeping the factory remote starter active. If you wish to use DBALL to control the remote start sequence, the factory remote starter must be disconnected before programming the DBALL as both modules cannot coexist.
* The DBALL LED turns ON solid orange for 3 seconds after programming or power up to indicate the bypass is not active. Refer to LED Diagnostics & Troubleshooting section for more information.
Locating the OEM Remote Starter
Vehicle Toyota Camry (key) 2007-2010 Toyota Corolla (key) 2009-2010 Toyota Highlander (key) 2007-2010 Toyota Matrix (key) 2009-2010 Pontiac Vibe (key) 2009-2010 Scion xB (key) 2008-2010 Scion xD (key) 2008-2010 Toyota Rav4 (key) 2006-2010 Toyota Sequoia (key) 2008-2010 Toyota Tundra (key) 2007-2010 Toyota Yaris (key) 2006-2010 Toyota Corolla (Smart Key) 2009-2013 Toyota Rav4 (Smart Key) 2009-2012 Toyota Camry (Smart Key) 2007-2011 Toyota Camry Hybrid (Smart Key) 2007-2011 Toyota Highlander (Smart Key) 2008-2013 Toyota Highlander Hybrid (Smart Key) 2008-2013
OEM Remote Starter & Connector Location Behind Glove Box & Passenger kick panel Behind Glove Box & Passenger kick panel & Junction Box & Steering column Behind Glove Box & Steering column Junction Box & Behind Glove Box & Passenger kick panel Behind Glove Box & Junction Box & Passenger kick panel Behind Glove Box & Passenger kick panel & Junction Box & Steering column Behind Glove Box & Passenger kick panel & Junction Box & Steering column Behind Glove Box & Passenger kick panel & Junction Box & Steering column Behind Glove Box & Passenger kick panel & Steering column Behind GloveBox & Passenger kick panel & Steering column Behind Glove Box & Junction Box & Steering column Behind Glove Box & Passenger kick panel & Junction Box & Steering column Behind Glove Box & Junction Box Behind Glove Box & Passenger kick panel Behind Glove Box & Passenger kick panel Behind Glove Box & Passenger kick panel Behind Glove Box & Passenger kick panel
? 2015 Directed. All rights reserved.
Platform: DBALL/DBALL2 Firmware: TL1
Installation Type 1
Rev.: 20150430 Page 5
See page 6 for help on locating key components in the vehicle and wiring reference chart.
White Connector At headlight switch
Scion XD and Toyota Yaris headlight switch
12
34
OR
5 6 7 8 9 10 11 12 13
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
Autolight: pin 19
See page 6 to determine the right connector for your vehicle.
Diagnostic Connector at OBDII (connector side view)
(-) Parking Lights
(-) Hood Status Input
(+) Brake Input
[1] (AC) Tach Input
(-) Trunk Status Input
(-) Door Status Input
(-) E-Brake Status Input
(+) 12V
(-) Ground
(-) Ground
HS CAN High: pin 6
1
8
9
16
HS CAN Low: pin 14
HS CAN High: Tan/Black: 3
HS CAN Low: Tan: 4
Autolight Shutdown: Orange/Red: 10
Autolight Shutdown: Yellow/Red: 11
(+) 12V
(+) 12V: Red: 13
(-) Ground (-) Ground: Black: 14
(-) E-Brake Status Output: Black/White: 1 (-) Door Status Output: Green/White: 3 (-) Trunk Status Output: Red/Black: 4 [1] (AC) Tach Output: Violet/White: 5 (+) Brake Output: Gray: 6 TX: Yellow/Black: 10 RX: Orange/Black: 11 (-) Hood Status Output: Blue/Red: 12
RX: pin 4
TX: pin 5
2
12
14
RF Prog. Button LED
Remote Starter
Connect to Ignition Connector
Visit our website for more information.
(+) Accessory (some vehicles require 2 accessories) (+) Start (some vehicles require 2 start) (+) Ignition (some vehicles require 2 ignition) (-) Lock Output (-) Unlock Output (-) Trunk Output (-) GWR (Status)
DBALL/ DBALL2
4
10
10: Blue/White: (-) GWR (Status) Input
9: Pink: (+) Ignition Input
3: Red/White: (-) Trunk Input
2: Blue: (-) Unlock Input
1: Green: (-) Lock Input
(+)12V
RX
(-) Ground
TX
P#: XKD2D65
7 65432 1
Black Connector at immobilizer
Not required in D2D mode. [1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
? 2015 Directed. All rights reserved.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- transmissions usa ws atf level adjustment for u660e f
- affiliated vehicles safety base report 2015 jul dec
- air resources board toyota motor corporation and medium
- platform dball dball2 firmware tl1 rev 20150430
- t 58 0078 14 august 8 2015 highlander highlander hv pre
- 2015 national highway traffic safety administration
- 1 report no 3 recipient s catalog no fhwa tx 15 0 6828
- vehicle histor y repor t net framework
- hvac servo motor noise
- fy2015 first quarter financial results