Biology – The Search for Better Health



Biology – The Search for Better Health

Section 3: During the second half of the nineteenth century, the work of Pasteur and Koch and other scientists stimulated the search for microbes as causes of disease.

• Describe the contribution of Pasteur and Koch to our understanding of infectious diseases.

Louis Pasteur was a French chemist whose discovery of the different forms of tartaric acid led to an interest in wine making. Fermentation was considered to be a totally chemical process at that time. Pasteur however, used a microscope to compare extracts of fermenting wine with those of souring wine. In fermenting wine he found small spheres. He also observed that these small spheres could sprout small buds – they were growing and must be alive. These spheres were yeast. In sour wine, Pasteur found no yeast but did find rod-shaped structures that also grew. Fermentation was a biological process.

In 1862 Pasteur conclusively disproved the theory of spontaneous generation, and supported the view that new cells are produced by existing cells. He showed that heating to 55 degrees celcius for thirty minutes could kill the organisms responsible for souring wine. Pasteur later applied the technique to milk, and that became known as pasteurisation and is still currently used as the standard treatment for milk.

The link between germs (micro-organisms) and disease was finally established when Pasteur determined that diseased silkworms contained a parasite and that farmers could eliminate the disease using only healthy, disease free worms. Pasteur then announced his germ theory of infection, and he carried out his famous swan necked flask experiment to support his theory.

These experiments involved using flasks that had long-drawn-out necks (like those of swans) that were not sealed. Meat broth was boiled in the flasks and as they cooled the air was drawn in from outside. Any microorganisms present in the air did not reach the broth as they were trapped in the narrow neck and the curve of the glass. No bacterial or fungal growth was observed in these flasks. Bacterial growth occurred if the curve of the flask was broken off and the contents of the flask exposed to the air. Furthermore, the tipping of a flask to allow the solution in it to reach the curve where the micro-organisms were trapped resulted in bacterial growth occurring. This added further evidence to discredit the theory of spontaneous generation. It proved that the organisms that contaminated the broth and caused it to decay must be carried in the air and not be spontaneously generated.

Pasteur used the results of Koch for further experimentation, first with the microorganism causing anthrax in sheep and later with cholera in chickens. During these experiments, Pasteur discovered that chickens which suffered as mild attack of cholera survived an injection of a highly virulent strain. Chickens without a prior infection died. The mild strain had given chickens immunity to cholera. Pasteur had discovered a principle called vaccination. He went on to develop vaccines for a number of other diseases such as rabies where he used the vaccine on humans for the first time. Pasteur had established the principle of immunity and provided an effective way to prevent infectious disease.

Robert Koch investigated Anthrax, which was a fatal disease prevalent in sheep and cattle. He examined the blood of sheep that had died from anthrax and identified rod-shaped bacteria that he isolated and grew in cultures. These cultured bacteria were then injected into healthy sheep that subsequently developed anthrax.

Koch also developed a technique for growing and observing pure cultures of the anthrax bacterium. He placed some drops of water fluid from the eye of a freshly killed ox on a cover slip. To this he added a tiny piece of spleen from a mouse killed from anthrax. He inverted the cover slip and sealed it with Vaseline. Then he used a microscope to view the culture. He observed that small rods were growing, hence proving that they were alive.

He repeatedly showed that the anthrax spores he had obtained from the pure cultures he had grown could cause the disease in other animals and kill them. These experiments added further weight to the germ theory of disease as they showed that a microorganism grown outside the body caused a disease.

Koch determined that each disease is caused by a specific microorganism. The principles he used to identify the specific micro-organism that was responsible for a disease came to be known as Koch’s postulates and are still in use today to identify the specific micro-organism that causes a particular disease. One of Koch’s subsequent big breakthroughs was the discovery of the bacterium responsible for tuberculosis, Mycobacterium tuberculosis.

Koch’s postulates

1. The same microorganism must be present in every diseased host.

2. The microorganism must be isolated and cultured in the laboratory and accurately described and recorded.

3. When a sample of the pure culture is inoculated into a healthy host, this host must develop the same symptoms as the original host.

4. The microorganism must be able to be isolated from the second host and cultured and identified as the same as the original species.

Pastuer

- linked the process of fermentation to a biological process

- Disproved the theory of spontaneous generation – all existing microbes must come from previous microbes - this is IMPORTANT

- Identified the causes of disease to many microbes (such as Cholera)

- Proposed the Germ theory of disease

- Created vaccines – showed that infectious diseases could be countered.

Koch

- Identified the cause of anthrax

- Was able to conclusively show that micro-organisms were the cause

- Produced a method to identify the cause of a disease (Koch’s postulates)

- Demonstrated the link between a particular organsism and a particular disease.

• Distinguish between prions, viruses, bacteria, protozoans, fungi, micro-parasites and name one example of a disease caused by each type of pathogen.

Prions:

A prion or “proteinaceous infectious particle” is a protein that is capable of causing disease. Unlike other types of pathogens, prions do not contain any genetic material (DNA or RNA). They are smaller than all other pathogens. Normal prion proteins are coded for by genes in an organisms DNA. It is unclear what the functions of these prion proteins are, but they are present mainly in the nerve cells of the brain. Normal prion proteins do not cause disease and can be destroyed by heat.

A mutation to the gene that codes for these normal proteins causes the production of a different form of this prion protein. This form has a different structure and is the disease-causing prion. This prion is also resistant to most normal methods used to break down proteins and cannot be destroyed by heating or treating with chemicals.

Infectious prions are capable of multiplying and are thought to do this when they come into contact with the normal prion proteins, altering their structure and changing them into infectious prion proteins. Because of their unique shape, infectious prion proteins tend to stick to each other and form long fibres that are toxic to nerve cells in the brain and kill them. This leads to the characteristic holes that are found in the brain of an organism suffering from a prion disease.

There are a number of ways an organism can contract prion disease including:

- By eating tissue containing infectious prions.

- As a result of surgery where contaminated implements were used.

- Through contaminated growth hormone injections or contaminated corneal transplants from dead donors.

- By inheriting the mutated gene that codes for the infectious prions

- By the spontaneous formation of infectious prions.

Diseases caused by prions are called spongiform diseases because the brain tissue of individuals that are infected by these diseases is full of holes, like that of a sponge. All of these diseases are fatal.

An example such a disease is kuru, a disease that was found in tribes in the Fore highlands of Papua New Guinea. The symptoms include uncontrollable shaking, continuous trembling, and grimacing of the face which led to the name ‘laughing death’. It was transmitted by eating, during funeral ceremonies, the infected brain tissue of dead relatives. Only women and children contracted the disease, as the men did not take part in the burial ritual. The transmission of disease stopped when the cannibalism practices of the tribe stopped. Another disease is BSE (Bovine Spongiform Encephalopathy – Mad Cow Disease)

Viruses:

Viruses are non-cellular pathogens that have both living and non-living characteristics. They contain genetic material and are able to pass on hereditary information (a characteristic of living organisms), are not composed of cells and can be crystallised (characteristics of non-living things). They are the smallest known reproducing ‘things.’

Viruses are larger than prions and many times smaller than bacteria. A virus is made up of a protective protein coat that encloses the genetic material, which may be either DNA or RNA. Viruses that contain RNA are known as retroviruses. Viruses are unable to reproduce on their own and can replicate only inside host cells. The viral protein coat contains chemicals that allow the virus to attach itself to the surface of the host cell. Once the virus attaches itself to the cell, it enters and takes of the cells reproductive mechanisms to make copies of itself. The cell becomes so full of copies that it dies and bursts, releasing the new viruses so they can repeat the process with other host cells.

Bacteriophages (viruses that invade bacterial cells) reproduce in the same way, but instead of entering the cell they simply inject their genetic material into the host cell. The treatment of viral diseases is very difficult as any attempt to kill the virus will also affect the host cells. Many diseases are caused by viruses, including influenza, measles, AIDS (caused by the human immunodeficiency virus) and herpes.

Bacteria:

Bacteria are single-celled prokaryotic organisms – they have a cell wall but no membrane bound nucleus or organelles. Their genetic material is a single large chromosome – a circular thread of DNA double helix.

Most bacteria have a capsule outside their cell wall. This is made of slimy gelatinous material and important in determining the virulence of the bacterium. The virulence of a bacterium with a capsule can readily cause disease because the slimy nature of the capsule makes it more difficult for the body’s defence cells to capture and ingest the problem. When the capsule is removed, the bacterial cell can be more readily captured by the defence mechanisms.

They are larger than viruses but smaller than protozoans and vary is size from 0.5 to 100 micrometres. Bacteria are classified on the bases of their shape – they can be a spherical shape (coccus), a rod shape (bacillus), a spiral shape (spirillum), a comma shape (vibrio) or an oval shape (rickettsiae). Bacteria reproduce by asexual reproduction using the process of binary fission (dividing in two). The time it takes for the number of bacteria to double is known as the generation time. This varies for different species and is between 10 minutes and 24 hours. This means that many bacteria can be produced in short space of time.

Some bacteria are beneficial whereas others are not. Those that aren’t release toxins or chemicals that are harmful to the host’s body (these are known as exotoxins). These toxins can either inhibit protein synthesis, damage cell membranes, disrupt transport of material across cell membranes, or interfere with normal nerve function. Some examples of diseases that are caused by bacteria include tetanus, meningococcal disease and food poisoning.

Protozoans:

Protozoans are single-celled eucaryotic organisms. They have a cell membrane, have no cell wall and possess a membrane-bound nucleus / organelles held together by a series of fine filaments. Only some of the many types are pathogenic. They usually reproduce by the process of asexual binary fission and range from 1-300 micrometers (smallest bacterium). They are motile. They are heterotrophs that absorb nutrients from their hosts.

Some protozoa possess a long whip-like tail called a flagellum to enable them to move about. These protozoans are known as flagellates. Ciliates have many hair-like projections called cilia surrounding the cell. These beat rapidly to propel them along. Protozoans such as Amoeba possess projections of the cytoplasm, called pseudopods, to move them around. Sporozoa are protozoans such as Plasmodium that do not have structures for motion and reproduce by spores. Diseases caused by protozoans include malaria, giardiasis and trypanosomiasis.

Fungi:

Fungi are eucaryotic organisms that possess a cell wall, but its composition is different to that of plant cell walls. In addition, fungi do not contain chlorophyll and are not capable of producing their own food - heterotrophs. They can be unicellular, such as yeasts, or multi-cellular, for example mushrooms. Most are composed of a system of microscopic tubular filaments or threads known as hyphae, which branch and spread to form a structure known as mycelium. Fungi range in size (micro to macroscopic), and also in reproductive methods (asexual, sexual or even both). Most fungi are saprophytic (live on dead organisms) and hence act importantly as decomposers. Pathogenic fungi are dermatophytes (live in skin, nails and hair), and number cause diseases such as candidiasis (thrush) and tinea.

Micro-parasites:

Micro-parasites are parasites that are visible to the naked eye and are larger than other pathogens. They are multicellular eucaryotic organisms that vary in size from the tiniest louse to very long tapeworms. Some macro-parasites cause disease directly, whereas others will act as vectors in the transmission of a disease. Macro-parasites can be divided into two groups:

1. Endoparasites live inside the host’s body and include flatworms (tapeworms) and roundworms. They cause diseases such as taeniasis (tapeworm disease), and elephantiasis (caused by a filarial worm).

2. Ectoparasites are parasites that live outside the body, usually sucking blood. Examples include mosquitoes and lice. Some of these parasites inject toxins while feeding; these can cause inflammation, allergic reactions and sometimes partial paralysis. Ectoparasites can also act as vectors for the transmission of other pathogens. The flea is vector for the bacterium Yersinia pestis, which causes bubonic plague.

Note: They sexually reproduce, and may lay eggs – may be hermaphrodites

• Identify the role of antibiotics in the management of infectious disease

Antibiotics play an extremely important role in the management infectious disease that is caused by bacteria. They are chemicals that are capable of destroying or inhibiting the growth of the bacteria that cause disease. Antibiotics are chemicals that target the bacteria without destroying the host and are not effective against viruses. 2 types – Broad Spectrum Antibiotics and Narrow Range Antibiotics.

The antibiotics act on the bacteria to destroy them in a number of different ways:

- Some antibiotics accumulate in the cells of the bacteria and prevent them from forming a new cell wall when they are dividing, for example, penicillin.

- Some antibiotics destroy the cell membrane, thus effectively destroying the bacteria, for example amphotericin.

- Some antibiotics interfere with protein synthesis so the bacteria are unable to make essential compounds, resulting in the death of the cell. Erythromycin is an example of an antibiotic that acts in this way.

• Gather and process information to trace the historical development of our understanding of the cause and prevention of malaria.

Malaria is one of the most prevalent infectious diseases in the world today, with more than 300 million cases reported and 1.5-3 million deaths, mostly of African children under 5 years old, each year. Malaria starts suddenly and is characterised by intermittent violent chills and intense fevers, severe headaches, convulsions and delirium. Anaemia is also a common symptom, as well as an enlarged spleen. Death will result when the tissue dies from a lack of oxygen or serious brain/kidney infections.

Understanding the Cause:

Step 1: Recognising the symptoms and hypothesising the cause

The symptoms of malaria have been reported since the beginnings of recorded history. In Chinese methodology for example, three demons are pictured: One with a hammer, one with cold water, and one with a stove. These demons were held responsible for the headache, chill and fever suffered with malaria. The Greeks, however realised that those who live in swampy areas had a higher chance of developing the disease. Hence they believed that it may have been due to the drinking of the swamp water, or the inhalation of the dirty air that resulted in the disease.

Step 2: Discovering the micro-organism.

Pasteur’s and Koch’s work ignited the search for the cause of malaria. In 1880 Charles Laveran discovered the pathogen that causes malaria while looking at the blood of malaria patients. This organism was a protozoan that he classified as Plasmodium.

In 1885, Golgi, an Italian neurophysiologist, established that there were at least two forms of the disease: one that causes a fever third day. In 1886, he observed that each of these forms produced differing amounts of new parasites (merozoites) and that the peak of the fever coincided with the release of the merozoites into blood.

Later, other scientists found that there was in fact two more malaria parasites and the initial pathogen’s name was changed form Plasmodium to P. falciparum.

Step 3: Determining life cycle of the parasite and the mode of transmission.

In 1897, Ronald Ross, demonstrated that the malaria parasite could be transmitted from infected patients to mosquitoes. He tested this hypothesis in birds and was successful in showing that the mosquitoes were able to pass the malaria parasite from bird to bird. He determined the main steps in the cycle of transmission of the malaria parasite and identified that only a certain strain of mosquito transmitted the malaria parasite.

Life Cycle of Malaria:

The mosquito ingests infected red blood cells, the cells are digested and the malarial parasite is released in the intestine of the mosquito. The parasites migrate from the intestine to the salivary glands where they remain ready to enter another host when the mosquito next feeds.

Prevention of Malaria

Although drugs are available for the treatment of malaria, a complete cure is difficult. This is because the parasite can remain dormant for many years in the liver before becoming active again. Different drugs are used against the different stages of the malarial parasite. Malaria is still one of the most serious infections in the world and is particularly common in some tropical and sub-tropical areas. The Anopheles mosquito, the main carrier of malaria is common in these areas.

Control of the disease is also becoming more difficult as mosquitoes become increasingly resistant to chemicals such as DDT, that have been effective against them in the past. Eradication of the vector for the malarial parasite is proving to be virtually impossible. People who need to travel to malarial infested regions must take all precautions to reduce their chance of coming into contact with mosquitoes.

History of Prevention:

The ancient Chinese used the anti-fever properties of the Qinghao plant in order to treat malaria. In order to prevent it, however, the ancient Greeks and Romans decided to build drains to remove stagnant water. After they had done this, the incidence of these fevers fell.

In the mid-1600s the first drug to treat malaria was produced. This was known as quinine. It was extracted from the bark of the Peruvian cinchona tree. After it was shown that the mosquito was responsible for the transmission of malaria, procedures were followed to reduce the chance of being bitten by a mosquito. Many areas where the mosquitoes were bred were drained, bodies of water were sprayed with oil to prevent breeding and protective clothing was worn to reduce the risk of being bitten.

Following this, a range of drugs were developed, each of which had a positive immediate effect such as Aterbrin, but over time, the virus evolved and became resistant, hence reduces the drugs effectiveness. Additionally, the use of DDT was employed to eradicate large numbers of mosquitoes. This also resulted in the same consequence where initially large populations were wiped out, but over time, the species evolved and became resistant to the pesticide.

Overall, the best method of prevention is those that reduce the risk of being bitten.

• Describe an infectious disease in terms of its cause, transmission, host response, major symptoms, treatment, prevention and control.

Disease: Malaria

Cause: Protozoan parasites: Plasmodium falciparum. It is an exclusive protozoan that only affects humans. It is transmitted by the female Anopheles mosquito.

Transmission: The female Anopheles mosquito feeding on the blood of humans. When the mosquito bites a human she injects an anticoagulant from her salivary glands which contains sporozoites (one stage of the protozoan’s lifetime) before feeding. The sporozoites circulate in the blood, enter the liver, enter the liver cells and then multiply. This is often after a dormant stage between two weeks to several months. The liver cells then rupture, releasing the young parasites which then enter the red blood cells. The parasite then further multiplies in the RBC’s which causes the RBC’s to rupture – hence releasing more parasites to infect a greater no of RBC’s.

Host Response: The immune system would produce killer T-cells (a special type of white blood cell) which could release chemicals to kill the parasite. Phagocytes, a specialised WBC, would then surround and enclose the parasite, thereby effectively destroying it with its internal enzymes. A fever (body temperatures of 41) - destroy enzymes within the parasite.

Major Symptoms: Shaking, chills, fever (result of Red blood cells rupturing and releasing parasites) and wastes. These symptoms will subside until Red Blood Cells rupture again (maybe in a day). Sometimes an enlarged liver and spleen can occur, which may lead to death in severe cases. Diarrhoea, nausea and vomiting

Treatment: Is a cocktail of anti-malarial drugs including artemisinin, which is very successful. The treatment however depends on the individual and the strain of plasmodium causes the malaria. P falciparum is the most virulent, with other strains being unlikely to cause death. These may be treated with oral supplements of weaker medications such as chloroquine. The other symptoms will also need to be treated – for example, water loss through vomiting and diarrhoea will lead to dehydration – hence high intake of fluids and dextrose is essential to maintain health, strength and hydration.

Prevention: Malaria cannot be prevented. There is no cure that makes one immune to it. Although research is being conducted for vaccines, all results to date have not been largely effective. Therefore the only two ways to ensure that malaria is prevented is to prevent being bitten by mosquitoes (this may be done through mosquito proof blankets and insect sprays). Also, by spraying mosquitoes with DDT, and DET, they will not be able to infect others, thereby preventing the spread of disease. Also, by taking anti-malarial drugs at the first sign of symptoms, adverse effects can be minimised as the protozoan has not reached maximum virulence.

Control: In order to control the spread of malaria, those infected with malaria should not be allowed to share items with others. Especially those that are put into the mouth such as toothbrushes – this a common cause of transmission of not only malaria but AIDS as well. Mosquito populations should be kept away from populated areas through the use of sprays. Blankets and preventive measures can control the spread of disease. Isolation of infected individuals until completion of treatment also prevents contact with others, hence preventing spread.

• Process information from secondary sources to discuss problems relating to antibiotic resistance.

How resistance evolves:

When penicillin was first discovered, and then many other antibiotics produced, the threat posed by infectious diseases was greatly reduced and there was a dramatic drop in the number of deaths from diseases that were previously untreatable. With the widespread use of antibiotics, a problem that threatens the successful treatment of these diseases has developed. Bacteria, during the normal process of natural selection have evolved strains that are resistant to many if not all of the antibiotics that are used to treat infectious disease in the world today.

The way in which bacteria develop a resistance to the antibiotic can be explained by Darwin’s theory of evolution by natural selection. The theory states that in any population there is variation. In a particular environment, the organisms that have the variation that is best suited to that environment survive and reproduce. This produces a population in which most organisms are adapted to survival in that particular environment. When antibiotics are administered to treat a bacterial infection, some of the bacteria present may possess a natural resistance to that particular antibiotic, and so they survive. They then reproduce and can quickly build up a population that is resistant to the antibiotic. In conjunction with this, the bacteria are also capable of passing this resistance on to other bacteria they encounter, further building up the population of resistant bacteria.

A number of common practices is further accelerating antibiotic resistance. These include:

- The overuse of antibiotics for treatment of many diseases - not just bacterial. Examples are the prescribing of antibiotics for the treatment of coughs, colds and the flu. These diseases are caused by viruses, which are not affected by antibiotics. This practice just gives the bacteria more chances to build up populations of resistant strains.

- A very common practice is to only take the antibiotics provided until all the symptoms disappear and not finish the whole course. This is also a dangerous practice as not all the bacteria present may be killed before the end of the course tablets. This allows yet another chance for the bacteria to survive, and reproduce more resistive strains.

- Food-producing animals such as chickens and pigs are fed antibiotics as part of their diet to promote growth. This widespread use of antibiotics further promotes the formation of antibiotic resistant populations of bacteria.

- The same process occurs when we use cleaning products that contain anti-bacterial ingredients.

Problems relating to antibiotic resistance:

The development of antibiotic resistance has been happening ever since the discovery of penicillin and many antibiotics that were originally hailed as ‘miracle cures’ are no longer effective.

Micro-organisms that cause diseases once easily cured, such as tuberculosis, have developed resistant strains that are not responding to the cheaper ‘first-line’ antibiotics. As a result of this, the effects of these diseases are now more severe and, because they take much longer to cure, the infectious period is longer, meaning that there us a greater chance of passing on the resistant strain of the micro-organisms to other members of the community.

When ‘second-line’ or ‘third-line’ antibiotics have to be used they are usually more expensive and more toxic. The drugs needed to treat multi-resistant tuberculosis are 100 times more expensive than those used to treat the non-resistant forms, and in countries where this is too expensive to use, the disease is untreatable and therefore spreads.

The result now it that a number of bacteria are resistant to almost all known antibiotics. Vancomycin is an antibiotic that is used only when all other treatments have failed, but even its effectiveness is reduced due to the emergence of vancomycin-resistant enterococci (VRE) infections. These are extremely difficult to treat and eradicate, and usually experimental drugs are used as a last resort.

As a result, antibiotic resistance is a major problem for the treatment of some diseases, as the current trend indicates that in the near future some diseases will have no treatment, unless there is a significant breakthrough in producing drugs that are more effective.

Some strategies to slow resistance:

- Antibiotics should only be prescribed for bacterial infections

- The antibiotic should target the pathogen and not be broad spectrum

- Normal hygiene practices and antibiotics should be taken for whole course.

- Do not use cleaning products that contain anti-microbial ingredients.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download