Golf Car Troubleshooting Guide
Golf Car Troubleshooting Guide 08-09 Alltrax/Wolf Controller
Problem: Car not running
Steps to diagnose car
1. Turn key to on position
2. Check if indicator lights are on
3. Turn forward-reverse switch to neutral, then reverse, then back to forward
4. Check if horn works 5. Check if turn signals work 6. Check if the headlights work 7. Check if brake lights work
8. Turn key to on position 9. Check the red wire opposite the on/off solenoid. This
should read 45 to 52 volts 10. Set volt meter to 200 volts DC
11. Attach negative lead to B negative (B-) on speed control
12. Touch front terminal to on/off solenoid. Voltage should read 45 to 52 volts
13. Move hot lead to forward-reverse solenoid on blue wire. Should read 45 to 52 volts
14. Check motor 15. Set volt meter to diode meter
16. Disconnect s1 wire for motor
17. Check continuity of 4 motor terminals, s1 ? s2 should have continuity.
18. A1 and A2 should have continuity
19. Set volt meter to 200 volts DC 20. With the negative lead still on B negative, check
the brown cable on the speed controller box, it should read 48 volts
21. Set volt meter to 200 k ohms
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- consumer reports car buying guide 2019
- free troubleshooting car problems
- troubleshooting car problems
- car troubleshooting questions
- new car prices guide 2019
- troubleshooting car alarm problems
- consumer reports used car buying guide 2019
- car troubleshooting guide
- ac motor troubleshooting guide pdf
- troubleshooting guide format
- troubleshooting guide template
- troubleshooting guide examples