DATE: August 25, 1995
State of Washington
Current Contract Information
Effective Date: December 13, 2012
|Contract number: |09006 |Commodity code: |8406 |
|Contract title: |Washington State Ferries Uniform, DOT |
|Purpose: |To update agency information from GA to DES |
|Term: |See Section 3. Terms and Conditions |
|For use by: |Restricted use: Washington State Ferries (WSDOT) |
| | |
|Contract type: |This contract is designated as convenience use (effective 7/13/2009). |
|Scope of contract |This contract is awarded to one contractor. |
|Contractor : |Washington State Department of Corrections |
| |Correctional Industries |
|Address: |Customer Service Dept., |Customer Service |
| |Washington Correction Center |Phone: (800) 628-4738 |
| |2321 Dayton Airport Road |FAX: (888) 535-0627 |
| |Bldg. “G” |Fed. I.D. No.: 91-0902133 |
| |Shelton, WA 98584 |Supplier No.: 8708 |
|Web Site | |
|Products available: |See Product listing and Prices |
|Ordering procedures: |See Page 2 |
This page contains key contract features. Find detailed information on succeeding pages. For more information on this contract, or if you have any questions, please contact your agency Purchasing Office or you may contact the contract manager at the number listed below
|Primary Contact: |Sarah Harris |Contract Assistance: |Customer Service |
|Phone Number: |(360) 407-9414 |Phone Number: |(360) 902-7400 |
|Fax Number: |(360) 586-2426 |Fax Number: |(360) 586-2426 |
|Email: |sarah.harris@des. |Email: |csmail@des. |
| | | | |
| | |
| | |
| | |
| | |
| | |
|Visit our Internet site: |des. |
| | |
|Payment address: |DOC-Correctional Industries Attn: CI Accounting |
| |P.O. Box 41116, Olympia, WA 98504-1116 |
| | |
|Order placement address: |DOC-Correctional Industries |
| |Customer Service Dept., |
| |Washington Correction Center |
| |2321 Dayton Airport Road, Bldg. “G” |
| |Shelton, WA 98584 |
| |Tel: (800) 628-4738 |
| |Fax: (888) 535-0627 |
|Minimum orders: |None. |
|Delivery time: |Thirty (30) Days ARO (After receipt of Order), |
|Payment terms: |1% - 30 Days |
|Shipping destination: |Customer’s delivery location anywhere in Washington State |
|Freight: |Prepaid (FOB destination) and added to Invoice (Customer pays freight) |
|Contract pricing: |See Contract Prices |
|Term Worth: |$773,670.00/2 years |
|Current Participation: |$0.00 MBE |$0.00 WBE |$0.00 OTHER |$773,670.00 EXEMPT |
| |MBE 0% |WBE 0% |OTHER 00% |Exempt 100% |
Notes:
I. Ordering: Submit Order directly to Contractor for processing.
II. Authorized Purchasers: Washington State Ferries (WSDOT)
Special Conditions/Contract Updates:+
12/13/2012 -Update agency information from GA to DES
12/30/2009 -
1. To allow price decreases (*) effective December 30, 2009 per CI request
2. To modify or add terms and conditions as required by WSDOT Ferries and approved by CI
3. To clarify delivery time as 30 calendar days ARO
4. To update CI contact and order location and contact information
5. To add prompt pay discount per CI (1% - 30 days)
6. To add items 44 and 45, Rain jacket zipper replacement service
8/17/2009 -
1. To allow price increases effective July 1, 2009 per CI request
2. To change contract type to “convenience” per term of contract (pg 9)
(Reference 2009 legislation ESSB 5352, effective 5/13/2009)
9/4/2007 – Added Break a way vests to contract
7/9/2007 - Added additional sizes and pricing. Specifically, pricing of sizes 4X and 5X has been added on Item # 14, 15, 16, 17, 19, and 21. These sizes will be “special order only” and non-returnable (except for warranty issues).
|SUPPLIER'S REPRESENTATIVES |
| |
|Ordering of standard products, order status information, general information, or to arrange an appointment with an Account Executive, contact: |
|Contact |Phone |Fax |Email |
|Customer Service Hotline |800-628-4738 |(888) 535-0627 |cicustsrvc@doc1. |
| |
|Contract Administration |
|Contact |Phone |Fax |Email |
|Contract Administrator – GA/OSP |(360) 902-7418 |(360) 586-2426 |dsoper@ga. |
|Dan Soper, Contracts Specialist | | | |
|Contract Administrator – CI |(360) 725-9136 |(360) 753-0219 |jdkirk@doc1. |
|John Kirk, Brands Manager | | | |
| |
|Accounting Inquiries |
|Contact |Phone |Fax |Email |
|Sherra Syrovy |(360) 725-9115 |(360) 664-9329 |Sherralee.syrovy@doc. |
| |
|Sales Department |
|Contact the customer service hotline (800-628-4738) for your assigned sales representative. |
Showrooms and Fitting Rooms
CI shall maintain a showroom in current showroom location identified below:
• 1918 Minor Avenue Seattle, WA. 98101 (Kroesen’s Inc.) Hours: Mon.-Fri. 8am-5pm minimum
*Please contact the showroom at (800) 878-1065 (contact person - Norm) for directions, showroom hours and to set up an appointment.
Products Available
SPECIFICATIONS
1. Trouser, Men’s & Women's (Terminal, Deck, and Unlicensed Engine)
• 65% polyester, 35% cotton, twill 7.7oz. sq. yd. Post cured durable finish.
• Color: Navy Blue
• Plain front, two (2) quarter top front pockets, and two (2) hip pockets.
• Pocketing material 70% polyester, 30% cotton, 2.9 oz. Per square yard, durable press finish for added strength and longevity. Pocketing shall be black.
• Two (2) front pockets have a minimum opening of 6” and a minimum depth of 5-3/4” from the bottom of the pocket opening. Pocket to be double tipped at bottom.
• Two (2) hip pockets have a minimum opening of 5-1/2” and a minimum depth of 5-3/4” measured from the bottom of the pocket opening. Left hip pocket has a button and buttonhole.
• Hip pocket uses double welt method construction with topstitching. Waistband incorporates curtain Snug Tex to help shirts remain tucked. Closure at waist has crush-proof reinforced hook and eye. French fly tab and button closure.
• Waistband (1-3/4” wide when finished) uses “closed method” permitting waist and seat alterations. Bottom of waistband topstitched 1/16” below seam for added strength and secure curtain.
• Curtain, 2-1/2” wide, contains ¾” Ban Rol to prevent waistband rollover at front.
• Brass (metal) memory lock zipper fly for added durability and longevity.
• Seven (7) interlined belt loops, ¾” in width of double thickness. Top of loops (except center back) shall be caught into the waistband curtain seam with a Rocap machine. The bottom of the loops to be dropped with bottom of loop securely sewn to the trouser.
• All stress areas bar tacked with firm straight bar tacks (no triangular bar tacks as found in non-professional trouser).
• Men’s stock sizes 28 to 54 (even only over 38) in regular rise, 28 to 40 (even only) in short rise, and 32 to 42 (even only) on long rise.
• Women’s stocked to size 24.
Sizes:
Men's: Waist 28 through 60, Custom hemmed to exact length -- Women's: Size 4 through 28, Custom hemmed to exact length
Material:
Men's & Women's - 65% Polyester - 35% Blend Cotton, Twill 7.7 oz. /sq.yd. per specifications as noted above.
Product # Description
F-2687 Men’s - Flying Cross by Fechheimer Item #: UD4954
F-2688 Women’s - Flying Cross by Fechheimer Item #: UD4964
Material:
Men's & Women's – 100% cotton
Product # Description
F-2580 Men’s - Fechheimer Item #: 74200
F-2581 Women’s - Fechheimer Item #: 74250
2. Pant, Jean Cut, Men’s (Terminal, Deck, and Unlicensed Engine personnel)
Seven bar tacked reinforced belt loops, bar tack reinforced hip and front pocket openings, jean style yoke double-needle flat felled, fly top-stitched, side seams double-needle reinforced from waistband to hem, waistband internally reinforced and lined, deep front pockets turned and top-stitched with 2” double layer reinforced, heavy duty locking metal zipper, custom hemmed to exact length. Button waist closure.
Color: Navy
Sizes Required:
Men's: Waist 28 through 50, Custom hemmed to exact length -- Women's: Waist 4 through 28, Custom hemmed to exact length
Material:
Men's & Women's --65% Polyester - 35% Blend Combined Cotton (F-2689) per specifications as noted above.
F-2689 Men’s
3. Shirt, Short Sleeve, Men’s & Women’s (Deck Personnel)
• Top center placket front, convertible collar, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket to have inside pencil pocket and hidden opening at flap.
• Edges of pocket have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement.
• Back has topstitched double yoke of shirting material.
• Collars, shoulder straps, and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – Button placket front.
• Five stitched-in military creases. Front creases, centered vertically, through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Fronts joined at yoke to eliminate raw edges on shoulder seam.
• Woven #250 Dacron interlining in collar, top center front and pocket flaps.
• Buttons – 19 ligne pearlescent to match shirt.
• Thread color fast polyester wrap matches shirt material.
• Nametag Application
Color: Marine Blue
Sizes: Men's: Stocked in neck sizes 14 through to 22
Women’s: Stocked in bust sizes 28 to 52
Material: Men's & Women's - 65% Dacron Polyester/35% combined cotton 4 to 4.25 oz. /square yard
F-2553 Men’s: Flying Cross by Fechheimer Item: 85R5435
F-2554 Women’s: Flying Cross by Fechheimer Item: 176R5435
F-3120 Nametag
F-3121 Nametag Application
Material: 100% Cotton, 6.0 oz. /square yard
F-2571 Flying Cross by Fechheimer Item: 7002
4. Shirt, Long Sleeve, Men’s & Women’s (Deck Personnel)
• Top center placket front, banded collar, long sleeves with barrel cuffs, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket to have inside pocket and hidden opening at flap.
• Edges of pocket have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement.
• Back has topstitched double yoke of shirting material.
• Collars, shoulder straps, and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – Button placket front.
• Five stitched-in military creases. Front creases, centered vertically, are through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Fronts joined at yoke to eliminate raw edges on shoulder seam.
• Woven #250 Dacron interlining in collar, top center front, and pocket flaps.
• Buttons – 19 ligne pearlescent match shirt.
• Thread color fast polyester wrap matches shirt material.
• Nametag Application
Color: Marine Blue
Sizes Men's: Stocked in neck sizes 14 through 22 in coordinated sleeve lengths
Women’s: Stocked in bust sizes 28 to 52 in coordinated sleeve lengths
Material: Men's & Women's - 65% Dacron Polyester/35% combined cotton 4 to 4.25 oz./square yard.
F-2555 Men’s: Flying Cross by Fechheimer Item: 35W5435
F-2556 Women’s: Flying Cross by Fechheimer Item: 126R5435
F-3120 Nametag
F-3121 Nametag Application
Material: Men’s100% Cotton, 6.0 oz. /square yard
F-2578 Flying Cross by Fechheimer Item: 7022
5. Shirt, Short Sleeve, Men’s & Women's (Unlicensed Engine personnel)
• Top enter placket front, convertible collar, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket to have inside pencil pocket and hidden opening at flap.
• Edges of pocket have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement.
• Back has topstitched double yoke of shirting material.
• Collars, shoulder straps, and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – Button placket front.
• Five stitched-in military creases. Front creases, centered vertically, are through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Front joined at yoke to eliminate raw edge on shoulder seam.
• Woven #250 Dacron interlining in collar, top enter front, and pocket flaps.
• Buttons – 19 ligne pearlescent to match shirt.
• Thread color fast polyester wrap matches shirt material.
• Nametag
• Nametag Application
Color: Navy Blue
Sizes: Men's: Stocked in neck sizes 14 to 22
Women’s: Stocked in bust sizes 28 to 52
Material: Men's & Women's - 65% Dacron Polyester/35% combined cotton 4 to 4.25 oz. /square yard per
specifications as noted above.
F-2557 Men’s: Flying Cross by Fechheimer Item: 85R5456
F-2558 Women’s: Flying Cross by Fechheimer Item: 176R5456
Material: 100% Cotton, 6.0 oz. /square yard
Sizes: Stocked in alpha sizes to 4 XL
Material: 100% Cotton, 6.0 oz. /square yard
F-2569 Flying Cross by Fechheimer Item: 7000
F-3120 Nametag
F-3121 Nametag Application
6. Shirt, Long Sleeve, Men's & Women’s (Unlicensed Engine personnel)
• Top center placket front, banded collar, long sleeves with barrel cuffs, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket have inside pencil pocket and hidden opening at flap.
• Edges of pocket have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement.
• Back has topstitched double yoke of shirting material.
• Collar, shoulder straps, and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – button placket front.
• Five stitched-in military creases. Front creases, centered vertically, are through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Fronts joined at yoke to eliminate raw edges on shoulder seam.
• Woven #250 Dacron interlining in collar, top enter front, and pocket flaps.
• Buttons – 19 ligne pearlescent match shirt.
• Thread color fast polyester wrap matches shirt material.
• Nametag
• Nametag application
Color: Navy Blue
Sizes: Men's: Stocked in neck sizes 14 to 22 in coordinated sleeve lengths.
Women’s: Stocked in bust sizes 28 to 52 in coordinated sleeve lengths.
Material: Men's & Women's – 65% Dacron Polyester/35% combined cotton 4 to 4.25 oz. /square yard.
F-2559 Men’s: Flying Cross by Fechheimer Item: 35W5456
F-2560 Women’s: Flying Cross by Fechheimer Item: 126R5456
F-3120 Nametag
F-3121 Nametag Application
Material: 100% Cotton, 6.0 oz. /square yard
Color: Navy Blue
F-2570 Navy Blue - Flying Cross by Fechheimer Item: 7020
7. Shirt, Short Sleeve, Men’s & Women's (Terminal Personnel)
• Top center placket front, convertible collar, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket to have inside pencil pocket and hidden opening at flap.
• Edges of pocket to have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement.
• Back to have topstitched double yoke of shirting material.
• Collars, shoulder straps, and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – button placker front
• Five stitched-in military creases. Front creases, centered vertically, shall be through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Fronts joined at yoke to eliminate raw edges on shoulder seam.
• Woven #250 Dacron interlining in collar, top center front, and pocket flaps.
• Buttons – 19 ligne pearlescent to match shirt.
• Thread color fast polyester wrap to match shirt material.
• Nametag
• Nametag application
Sizes: Men’s stocked in neck sizes 14 to 22
Women’s stocked in bust sizes 28 to 52
Color: White
Material:
Men's & Women's - 65% Dacron Polyester/35 % Combined Cotton 4 to 4.25 oz. /square yard per specifications as noted above.
F-2561 Men’s: Flying Cross by Fechheimer 85R5400
F-2562 Women’s: Flying Cross by Fechheimer 176R5400
Material: Men’s100% Cotton, 6.0 oz. /square yard
F-2579 Fechheimer Item: 7001
F-3120 Nametag
F-3121 Nametag Application
8. Shirt, Long Sleeve, Men’s & Women's (Terminal Personnel)
• Top center placket front, banded collar, long sleeves with barrel cuffs, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket to have inside pencil pocket and hidden opening at flap.
• Edges of pocket to have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement
• Back to have topstitched double yoke of shirting material.
• Collars, shoulder straps, and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – button placket front.
• Five stitched-in military creases. Front creases, centered vertically, shall be through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Fronts joined at yoke to eliminate raw edges on shoulder seam.
• Woven #250 Dacron interlining in collar, top center front, and pocket flaps.
• Buttons - 19 ligne pearlescent to match shirt.
• Thread color fast polyester wrap Nametag application to match shirt material.
• Nametag
• Nametag application
Color: White
Sizes:
Men's: Stocked in neck sizes 14 to 22 in coordinated sleeve lengths
Women’s: Stocked in bust sizes 28 to 52 in coordinated sleeve lengths
Material:
Men's & Women's -- 65% Dacron Polyester/35% combined cotton 4 to 4.25 oz. /square yard per specifications as noted above.
F-2563 Men’s: Flying Cross by Fechheimer Item: 35W5400
F-2564 Women’s: Flying Cross by Fechheimer Item: 126R5400
Material: 100% Cotton, 6.0 oz./square yard
F-2573 Flying Cross by Fechheimer Item: 7021
F-3120 Nametag
F-3121 Nametag Application
9. Shirt, Short Sleeve, Men’s and Women’s
• Top center placket front, convertible collar, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket to have inside pencil pocket and hidden opening at flap.
• Edges of pocket have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement.
• Back has topstitched double yoke of shirting material.
• Collars, shoulder straps and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – button placket front.
• Five stitched-in military creases. Front creases, centered vertically, are through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Fronts joined at yoke to eliminate raw edges on shoulder of seam.
• Woven #250 Dacron interlining in collar, top center front, and pocket flaps.
• Buttons – 19 ligne pearlescent to match shirt.
• Thread color fast polyester wrap matches shirt material.
• Nametag
• Nametag application
Color: Tan
Sizes:
Men's: Stocked in neck sizes 14 to 22
Women’s: Stocked in bust sizes 28 to 52
Material:
Men's & Women's - 65% Dacron Polyester/35% combined cotton
F-2574 Men’s: Flying Cross by Fechheimer Item: 85R5414
F-2575 Women’s: Flying Cross by Fechheimer Item: 176R5414
Material:
Men's Only – 100% Cotton
F-2582 Men’s: Flying Cross by Fechheimer Item: 85R5414
F-3120 Nametag
F-3121 Nametag Application
10. Shirt, Long Sleeve, Men’s and Women’s
• Top center placket front, banded collar, long sleeves with barrel cuffs, cross-stitched shoulder straps, shirt tail bottom.
• Two mitered bottom pleated breast pockets (5-5/8” wide by 6” deep) with scalloped flaps; left pocket has inside pencil pocket and hidden opening at flap.
• Edges of pocket have Velcro sewn through pocket and shirt for added reinforcement to correspond with Velcro on pocket flaps.
• Full badge reinforcement.
• Back has topstitched double yoke of shirting material.
• Collars, shoulder straps and flaps are double stitched. Top and bottom ply and interlining are first stitched together, turned right side out, and topstitched.
• 7 – button placket front.
• Five stitched-in military creases. Front creases, centered vertically, are through pockets and flaps. Spacing 3 back military creases proportionate to size of shirt.
• Fronts joined at yoke to eliminate raw edges on shoulder of seam.
• Woven #250 Dacron interlining in collar, top center front, and pocket flaps.
• Buttons – 19 ligne pearlescent to match shirt.
• Thread color fast polyester wrap matches shirt material.
• Nametag
• Nametag application
Color: Tan
Sizes:
Men's: Stocked in neck sizes 14 to 22 in coordinated sleeve lengths
Women’s: Stocked in bust sizes 28 to 52 in coordinated sleeve lengths
Material:
Men's & Women's - 65% Dacron Polyester/35%4 to 4.25 oz. /square yard
Product # Description
F-2576 Men’s: Flying Cross by Fechheimer Item: 35W5414
F-2577 Women’s: Flying Cross by Fechheimer Item: 126R5414
Material:
Men's only – 100% Cotton
Product #
F-2583
F-3120 Nametag
F-3121 Nametag Application
11. Trouser, Suntan (Licensed Engine personnel)
• Super service twill, 65% polyester 35% combed cotton. Post cured durable finish.
• Front pockets – side pocket styling.
• Hip pocket – 5-1/2” wide, 6” deep, topstitched welt. Left hip pocket with tab and button secure closure.
• Waistband 1-1/2” wide with ¾” Ban Rol all around.
• Waistband curtain, all pocketing, to be tan. Snugtex to help keep shirts tucked.
• Seven (7) belt loops (interlined) 3/8” wide dropped ¼” below waistband seam and sewn into bottom of band.
• Grown-on French fly and reinforced hook and eye closure. Brass zipper at fly with contrasting tan tape.
• Crotch lining at front, folded, of pocketing material.
• All thread and buttons to match basic trouser fabric.
Color: Suntan
Sizes: Stocked in size 28 to 46 in shorts, regulars and longs. Custom hemmed to exact length.
Material:
Men's 65% Polyester/35% Cotton per specifications as noted above.
F-2691 Men’s: Fechheimer Item #: 20P5703
Material:
Men's only – 100% Cotton
Product #
F-2584
12. Coveralls - Deck, Terminal & Oiler Personnel
Fabric of 100% cotton. Concealed stainless steel button front closure. Collar being one piece and topstitched. Pockets are two set-in front pockets, two patch hip pockets, two breast pockets and a rule pocket. Side vent openings. Felled inseams with safety stitched out seams. Sized to be worn over clothes. Custom hemmed to exact length.
• Nametag
• Patch
• Nametag application
• Patch application
Color: Navy Blue, White, Fisher Stripe
Sizes:
28 through 60,
Material: 100% cotton:
F-2748 Cotton - Navy (Red Kap CC16NV)
F-2597 Cotton – White (Red Kap CC16NV)
F-2598 Cotton - Fisher (Red Kap CC16HB)
F-3120 Nametag
F-3121 Nametag Application
F-2605 Patch
F-3122 Patch Application
13. Coveralls – Assistant and Chief Engineers
Self-collar, two brass zippered chest pockets with side openings, bi-swing action back, two reinforced hip pockets with brass zipper. Elastic inserts at waist, snap take-up leg cuffs and sleeves, hammer loop left leg. Metal buttons. Custom hemmed to exact length
• Nametag
• Patch
• Nametag application
• Patch application
Color: Navy Blue, White, Fisher Stripe
Sizes Required:
28 through 60
Material:
100% cotton:
F-2749-Cotton - Navy (Red Kap CC14NV)
F-2599 -Cotton - White (Red Kap CC14WH)
F-2600 -Cotton - Fisher (Red Kap CC14HB)
F-3120 Nametag
F-3121 Nametag Application
F-2605 Patch
F-3122 Patch Application
14. Winter Jacket, Waist length (Agent, Deck, Info, Terminal)
Waist length jacket with double front plackets over a two-way zipper. Telescopic collar, lower patch pockets with inverted pleats and with side muff openings. Athletic cut sleeves. Permanent epaulets, zippered side vents. Adjustable sleeve cuffs. Removable thermal liner. Reference product is Gerber’s identification number 70M1.
Outer shell: Nylon 70 Denier Taslan Supplex Nylon 70. Color: Navy. Denier filling plain weave, treated with durable fluorocarbon water and stain release agents and a waterproof breathable solvent based urethane coating. Is seam-sealable. Weight Fabric (uncoated) 153g/sq.m. Weight Coating 1.0 ounces per square yard. Manufacturer shows proof of the following minimum test results (from an independent testing laboratory): Mullens Hydrostatic 35 lbs M.V.T. 1700gram/sq.m 24hours Color fastness to light good 20/40 hours.
Lining: Type: 100% polyester 50 denier in the warp and 150 denier in the filling, plain weave. Thread Count: 107 in the warp and 66 in the filling Weight: 70 grams per square meter Good color fastness and crocking. Color: Black
Removable thermal Liner: Type: Removable insulated thermal liner. Face and back fabric: 100% polyester 50 denier in the warp and 70 denier in the filling, plain weave. Thermal insulation batting: 100% polyester ThermaGuard, weight of 150 grams per square meter. Stitch Pattern: Six (6) inch diamond stitching pattern. Color: Black.
Fleece Pocketing: Black, fleece.
Knitting: 100% stretch knit, continuous filament yarn 400 denier, with a minimum of 16 wales and 32 courses, rating to light, perspiration and wet/dry cleaning to be a minimum of 4. Wristlet to be 8x3 flare. Black.
Interling: White,pellon.
Fasteners: All fasteners are as follows or equivalent:
Zippers: The Front zipper is a #8 size, delrin, two sliders. The Liner zipper is a #5 size, aluminum, one slider. The Side zipper shall be a #5 or #6 size, coil, one slider.
Snaps: The snaps are universal prong snaps that have been oxidized to prevent rusting.
Thread: All thread is polyester thread with a wrap with 36 strength in a 50 size or better.
Seam Tape: Composite seam sealing tape that is compatible to the composite fabric, 7/8” wide.
Elastic: Natural color, 2" Waistband. Natural color, 1" Cuff.
Binding: Black, 1-3/4" wide, nylon bias.
Velcro: Black, 1” wide, hook & loop.
Metal Buttons: Silver “S”, 24 ligne, for deputy, Gold “S” for officers.
Button Rings: Silver.
Front: There is a two-way Delrin zipper under double storm plackets. Over the front zipper there are two front storm plackets to form a waterproof cover. There are 5 hidden oxidized snaps evenly spaced on the front plackets. The top placket measures 3" wide, and shall be interlined. The under placket measures 2-1/4" wide and is interlined. The bottom of the plackets is aligned evenly with the waistband. There is a badge emblem set on the upper left chest.
Badge Holder: There is a self-material badge holder placed on the left breast. The top grommet is set as high as possible. The lower grommet is set one inch below the upper grommet.
Pockets: There are two double compartment inverted pleat pockets placed 2" above the waistband. Pockets measures 7" wide by 7-3/4" long, pleat measures approximately 1-1/4". The side opening of the pockets is formed under each pocket with the opening to the sleeve side which will measure 6". The back lining of these pockets is a soft fleece fabric. Pockets close with flaps with beveled corners with small snaps at each flap and pocket corner for closure. The pocket flaps measure 7-3/8” wide by 3” long, the flaps are interlined. There is a buttonhole set at the center of the pocket flap for a metal button. There is a metal button ring to hold the button in place.
Collar: The collar measures 4-1/4" at the ends and 4-1/2" at the center. The collar is cut straight and with no stand so that it is seam sealed at the neck seam. The collar assembly is sewn together without zigzag stitching. The collar is interlined. There is a knit collar set on the top collar and a self-material jacket hanger centered in the center of the knit collar.
Back: There is a full cut back with a separate cut waistband that measures 2-1/2" and will be shirred with a 2" elastic. The back waistband is shirred from side to side. The front waistbands are interlined.
Sleeves: The sleeves are a two piece athletic cut style for freedom of movement. There is one-piece design cuffs made of outer fabric that are adjustable and measure 1-5/8" wide. Half of the cuffs are heavy-duty elastic stretched and sewn with a double needle. The other half of the cuffs are plain and interlined. There are cuff tabs that measure 3” long, 1-1/4" at the widest and tapers to 3/4" at the end. The cuff tab has a Velcro hook which attaches to the Velcro loop set on the cuff for adjustments. The Velcro hook on the cuff tab is 1” wide x 1-1/2” long, the Velcro loop is 1” wide x 3-1/2” long.
Epaulets: The epaulets are sewn into the top sleeve seam in the shoulder area and have a buttonhole for a metal button closure at the collar end. The button is held in place with a silver metal ring. The epaulets measure 2-1/2" wide at the shoulder points and gradually taper to a width approximately 2" wide near the collar where it comes to a point. The epaulets are set with a cross-stitching at the shoulder end and are held by a button through a buttonhole.
Side Vents: There is black nylon coil zippers sewn into each side seam to allow access to the weapon and equipment. The zipper is set to both the shell and the permanent lining. The zippers are approximately ten (10”) inches in length to allow for exposure of the entire weapon. There are zipper tabs with snaps for closing the bottom of the side vents. The tabs measure approximately 3" in length and 1" in width, with a gypsy snap fastener at the point so that the tab can be secured back for storage or snapped for use. There is one snap on the front portion of the waistband and one snap on the back portion of the waistband.
Waistband: There is a separately cut waistband that measures approximately two and half (2-1/2”) inches wide and elasticized in the back with a two (2”) inch heavy-duty elastic. The back portion of the band is shirred. The front band pieces are interlined.
Lining: The jacket is fully lined with taffeta lining. All lining stitching is done with a 5 thread safety stitch with a seam serge machine. There shall be two patch pockets made out of the lining fabric that shall measure 5-1/2” wide by 5-3/4” long. The lining sleeves are a three piece design to allow emblems and embroidery applied without affecting the waterproof ness and contamination (see emblem attachment).
Emblem: There is an emblem on each upper sleeve, sewn and seam sealed.
Emblem Attachment: There is an access for sealing the stitching for attaching emblems that are applied after manufacture. The Gerber garment uses its patented sleeve access, which is a three-piece design. The lining two-piece top sleeve opens 10" from the shoulder seam and closes with a snap or Velcro. Patent #5,090,058.
Facings: Outer shell fabric facings is set on the black lining with a concealed zipper track to accommodate a zip-out insulated liner. Facings measure approximately 3" at the bottom increasing to 4-1/2" at the gorge and continue until it ends at the shoulder seam. The back facing runs from shoulder seam to shoulder seam, which measures 1-1/2".
Removable Liner: The removable thermal liner is constructed of 100% black nylon taffeta and the inner side is 100% nylon tricot, both color black. The thermal batting is 7.5 ounce polyester fiber. The stitch pattern is a 6" diamond. The liner is attached to the jacket with #5 aluminum zippers, 48” long, set on the front facings. There are knit wristlets and large metal snaps at the cuff area for attachment. There are 5-3/4" vents at the bottom of the side seams. The quilt parts are bound with 1-3/4" black nylon bias binding. There is a slash opening on the left side that shall be bound.
Seam Sealing: All external seams and sewing are seam sealed with 7/8" seam sealing tape that is set with a hot air seam sealing machine. Seams are randomly tested with a Suter tester at 3 psi for 3 minutes. A log is maintained to record the testing results.
Labels: Each garment has a Gerber brand label, permanent size labels, a care instruction label and an ID label. Each liner has a brand label, a care instruction label, permanent size labels.
Hangtag: Gerber hangtag.
• Nametag
• Nametag Application
Size: XS – 5XL
Color: Navy
F-2774
F-3120 Nametag
F-3121 Nametag Application
15. Winter Jacket, Waist Length. (Licensed Engine)
Waist length jacket with double storm front, Telescopic collar, two-way inverted pleat patch
pockets with side muff openings. Two-piece sleeves, adjustable cuffs, bi-swing back, removable
epaulets, and permanent badge holder. Removable THINSULATE thermal body and sleeve liner.
Reference product is Gerber’s identification number 30J_ ZED BARRIER JACKET
Outer shell: Nylon 70 Denier (warp) and 3 ply Taslanized Supplex Nylon 70 Denier filling plain weave, treated with durable fluorocarbon water and stain release agents and a waterproof breathable solvent based urethane coating. Must be seam-sealable. Weight Fabric (uncoated) 3.8 to 3.9 ounces/sq. yd. Weight Coating 1.0 ounces/sq.yd. Manufacturer shows proof of the following minimum test results (from an independent testing laboratory): Mullens Hydrostatic 35 lbs M.V.T. 450 gram/sq. m 24hours Color fastness to light good 20/40 hours.
Lining Fabric: Black nylon taffeta lining. Plain weave, 70-denier nylon type 66 continuous filament yarns with 34 filament, melting point 455 degree Fahrenheit. The fabric shall have a minimum weight of 1.80 ounces/sq. yard with a thread count of 104 in the warp and 86 in the filling (+-2%). The fabric has good color fastness and crocking. Breaking Strength: Warp 125 lbs., Filling 85 lbs (+-5%) Tear Strength: Warp 3.5 lbs., Filling 2.1 lbs (+-5%) Shrinkage: Warp 2%, Filling 2%.
Removable thermal Liner: 2 Face THINSULATE diamond quilt. Color Black. Face Type: 86 pic taffeta, per lining fabric specification. Insulation: 200 gram weight for all body parts of the liner. THINSULATE. 100 gram weight for all sleeve parts of the liner. THINSULATE. Backing Type: 100% nylon tricot, black. Thread Count: Wales 32, Courses 28. Stitch Pattern: 6" diamond stitch.
Knitting: 100% nylon stretch knit, continuous filament yarn 400 denier, with a minimum of 16 wales and 32 courses, rating to light, perspiration and wet/dry cleaning is a minimum of 4. Wristlet is 8x3 flare.
Fleece Pocketing: Black, Fleece.
Interlining: White Pellon.
Fasteners: All fasteners are as follows or equivalent:
Zippers: Front zipper, #8, Delrin with 2 sliders. Liner zipper, #5, Aluminum with 1 slider. Pocket zipper, #2, coil with 1 slider. Side zipper, #6, 10", Coil, with 1 slider.
Snaps: The snaps are universal prong snaps that have been oxidized to prevent rusting.
Thread: All thread is polyester thread with a wrap with 36 strength in a 50 size or better.
Seam Tape: Composite seam sealing tape that is compatible to the composite fabric, 7/8” wide.
Plastic Hanger: Black, delrin D-ring.
Elastic: Natural color, 1-1/2" Bi-swing. Natural color, 2" Waistband. Natural color, 1" Cuff.
Binding: Black, 1-3/4" wide, nylon bias.
Eyelets: Black, metal, small.
Velcro: Black, 1” wide, hook & loop.
Shoulder pads: In-house.
Metal button rings: Silver, button rings.
Metal Buttons: 24 ligne.
Front: There is a two-way Delrin zipper under the double front plackets. The plackets close with five hidden (on navy color only) snaps and extend to the top of the collar. The top placket measures 2-1/2” wide and the under placket measures 1-3/4’ wide, both plackets shall be interlined. On the upper left chest there is a badge holder with small metal eyelets that are 1-1/8”apart center to center. The badge holder measures 1” wide by 2-1/4” in length.
Pockets: There are two double compartment inverted pleat pockets placed 2" above the waistband. Pockets measure 7" wide by 8" deep, pleat to measure 1-1/4". Side opening pockets are formed under each pocket with a 6” opening on the side. The back lining of these pockets is a fleece fabric. Pockets close with flaps that are interlined and measure approximately 7-1/4’ wide by 3” long. The pocket flaps have beveled corners with matching Velcro hook fasteners measuring 1" wide x 2" long and small snaps at each flap corner which anchor to the pocket Velcro loop and snaps.
Collar: The telescopic collar measures 4-1/4" at the ends and 4-1/2" at the center. The collar is cut straight and with no stand so that it is seam sealed at the neck seam. The collar assembly is sewn together without a zigzag stitching. The collar is interlined.
There are three snaps, male portions, set onto the under collar for an optional hood. There is a knit collar set on the neck seam of the top collar. There is a jacket hanger made out of the self-material that will hold a black Delrin “D” ring, set at the center neck seam of the top collar.
Back: The back is a bi-swing design with a separately cut elasticized waistband. There are bi-swing gussets for freedom of movement. The gussets are held in place with 1-1/2" elastic, in natural color.
Sleeves: The sleeves are a two-piece coat sleeve design with underarm gussets for freedom of movement. There are shoulder pads sewn into the shoulder and sleeve seam.
Cuffs: The adjustable cuffs are a one-piece design made of outer fabric that measures 1-5/8" wide. Half of the cuffs are heavy-duty elastic stretched and sewn with a double needle. There are cuff tabs that measure 1-1/4" wide and taper to 3/4" wide, and measure 3" long and with a female portion of a snap. The top half of the cuffs is interlined and has two snaps (male portions) for cuff adjustments.
Epaulets: The epaulets are removable and finish at the collar seam. The epaulets are interlined and measure approximately 2-1/4" at the shoulders and taper to 1-3/4”. These epaulets are detachable by passing an under-strap through small loops (two each side) that are placed on the shoulders of the jacket. There is a Velcro loop that measures 1" by 1" set to the top of the shoulder seam at the collar point and anchors to a Velcro hook (1" by 1") that is set to the under side of the epaulet. The epaulets have a buttonhole for a button at the pointed end.
Side Vents: There are black nylon coil zippers sewn into each side seam to allow access to the weapon and equipment. The zipper is set to both the shell and the permanent lining. The zippers are approximately ten (10”) inches in length to allow for exposure of the entire weapon. The side vents shall have protective zipper plackets that are set behind each zipper.
The zipper side vent plackets measure approximately 2” wide by 10’ long. There are side tabs with snaps for closing the bottom of the side vents. The tabs measure approximately 3" in length and 1" in width, with a gypsy snap fastener at the point so that the tab can be secured back for storage or snapped for use. There is one snap on the front portion of the waistband and one snap on the back portion of the waistband.
Waistband: The waistband is separately cut and finished approximately 2-1/2" wide. The back portion of the band is shirred over heavy -duty elastic 2" wide. The front band pieces are plain and are interlined.
Seam Sealing: All external seams and sewing are seam sealed with a 7/8" wide seam sealing tape that is set with a hot air seam sealing machine. Seams are randomly tested with a Sutor Tester 3 psi for 3 minutes. A log is maintained to record the testing results.
Lining: The jacket is fully lined with 86 pic nylon taffeta. There is a patch pocket made out of shell material and is placed on the left front. The pocket measures 7"x 10". The opening of the pocket is zippered with a 6" nylon coil zipper. The lining sleeves are a three piece design to allow emblems and embroidery applied without affecting waterproof ness and contamination. There are two snaps set on each sleeve for the attachment of the liner.
Emblem Attachment: There is an access for sealing the stitching for attaching emblems that are applied after manufacture. The Gerber garment uses its patented sleeve access which is a two piece lining top sleeve that opens 10" below the armholes and closes with a snap or Velcro. Patent #5,090,058.
Facings: The facings are made out of shell material and measure at least 4" at the
zipper. The facings are set so that the liner zipper can be set. The facings are interlined.
Removable Liner: The removable thermal liner of THINSULATE has a 200 gram
weight in the body portion and 100 gram weight in the sleeves. There are black stretch nylon wristlets set at the cuffs. The cuffs are held in the jacket with two large metal snaps that are set on the sleeve seams. The liner is held in place with a #5 size, 48" aluminum zipper with one slider. The liner is bound with black nylon binding. There is a bound slit-opening in the left front of the liner that aligns up to the zipper opening of the inside pocket on the lining. There are knit gussets set into the back of the liner and on the sleeve armholes there are bound to opening for freedom of movement.
Labels: Each garment has a brand label, care instructions label, permanent size labels and an ID label. On the removable liner there shall be a Manufacturer label, permanent size labels, care instruction label, a THINSUATE label and an ID label.
Hangtag: Each garment has a hangtag a Factory Warranty hangtag and a THINSULATE hangtag.
• Nametag
• Nametag Application
Sizes: XS – 5XL
Color: Brown.
F-2775
F-3120 Nametag
F-3121 Nametag Application
16. Reversible Jacket, Men’s and Women’s (Agent, Deck, Info, Terminal, and Unlicensed Engine) Reversible jacket, waist length, waterproof, and breathable. ANSI 107 Class III compliant for superior visibility. 3M Scotchlite trim on the high visibility lime yellow lining. Removable ThermaGuard quilted liner.
• ANSI 107 Viz Tech lining fabric.
• Waterproof/breathable outer shell construction with sealed seams.
• 3M Scotchilte reflective trim.
• Removable ThermaGuard quilt liner.
• Lower patch pleat pockets with scalloped flaps.
• Stand up collar.
• Nametag
• Nametag Application
Sizes: XS - 5XL, Regular and Long
F-2772 Reversible Windbreaker (Gerber “Thriller X” Reversible)
F-3120 Nametag
F-3121 Nametag Application
17. Winter Jacket, Hip-length
Hip length waterproof breathable EMS jacket made of Stedair EMS outer shell. Thinsulate removable liner. Four-pocket front, double storm placket and telescopic collar. Athletic cut sleeve and 2” Silver Scotchlite Reflective package. NFPA 1999, 2003 edition certified.
• Stedair EMS fabric, waterproof/breathable.
• Outer shell tri-laminate barrier construction.
• NFPA 1999, 2003 edition certified to stop blood borne pathogens.
• Tested and Classified by Underwriters Laboratories.
• Removable Thinsulate quilted liner.
• Large, two-way cargo pockets with tool holders and flap closures.
• Patch pockets on both chests with flap closures.
• Microphone tabs on both shoulders.
• Athletic cut sleeves for greater comfort and mobility.
• Adjustable Velcro cuffs.
• Scotchlite reflective material package.
• Nametag
• Nametag Application
Sizes: XS - 5XL, Regular and Long
F-2778 Hip Length Jacket (Gerber Chicago 2000)
F-3120 Nametag
F-3121 Nametag Application
Color: Navy
Sizes Required:
XS – 5XL, Regular to X-Long
18. Raingear Pants (Deck, Info and Terminal Personnell)
Waterproof breathable rain pants made with Stedair EMS outer shell. Elasticized waistband with drawstring cord and barrel clip adjusters. Cargo pockets on both thighs, Scotchilte reflective material below each knee, and zippered cuffs. NFPA 1999, 2003 edition certified.
• Stedair EMS fabric, waterproof/breathable.
• Outer shell tri-laminated barrier construction.
• NFPA 1999, 2004 edition certified to stop blood borne pathogens.
• Tested and Classified by Underwriters Laboratories.
• Elasticized waistband with drawstring and barrel clip adjusters.
• Large cargo pockets on both thighs with flap closures.
• 2” Scotchlite reflective material below each knee Silver or Lime/Silver
• Zippered cuff for easy on and off.
Color: Midnight Blue
Sizes:
XS – 3XL Regular and Long
F-2930 Raingear – Pants (Gerber 911 Rain pants)
19. Winter Jacket, Hip-length (Assistant & Chief Engineers)
• Shell Fabric/Design:
o 100% Nylon Tactel two-ply.
o Waterproof repellent finish.
• Permanent Body Lining:
o 100% Nylon Taffeta.
o 70 Denier warp and fill.
o Color: Black.
o Waterproof/breathable WeatherTech ® coating.
o All lining joining seams shall be safety stitched and then sealed with 1” heat sealed tape to prevent leakage.
o The tape shall be applied by hot air method.
o All stitching through the shell lining shall be sealed with waterproof tape.
o The lining material shall extend through the top collar of the shell garment to form a waterproof barrier.
o There shall be two compression snaps at the seam joining point and opposite, approximately 2-?” from the sleeve bottom, to attach the S327 Public Safety Fleece Jacket as a liner.
o The shell jacket lining shall be 100% 210T nylon taffeta.
o There shall be inside zippers sewn on top of front zipper tape, on both sides to accommodate the zip in liner style S327 fleece.
o The inside facing zippers shall be #5 Delrin reversible measuring approximately 26” long.
o There shall be an 8” nylon coil zipper on a facing of shell material for access to the outer shell for embroidery or customization to the left front without sewing through the lining.
• Front:
o There shall be a 2-way zip to the neck YKK zipper with a double storm fly that secures with six snaps (size Large/Regular).
• Pockets:
o There shall be two zippered pockets one on each side under the double covered wind fly.
o Each pocket shall measure 9” long.
o There shall be two, 2-way front pockets on the outside front of the jacket shell which shall be lined with fleece and snap close.
o Next to each front pocket, closest to the zipper, there shall be two Val covered, zippered storage pockets.
o Each pocket shall measure 8” long.
o Inside the jacket there shall be two welt covered, zippered storage pockets made of shell fabric on the outside and lining fabric on the inside of each pocket.
o The pockets shall measure 9-?” long by 6-ψ” wide.
• Epaulets:
o There shall be two crossed stitched epaulets that attach to the shoulders of the garment with a snap.
o The epaulets shall measure 7” long by 2” wide and forming a point at the end closest to the neckline (size Large/Regular).
• Bottom Band:
o There shall be an elasticized back bottom band with a full front bottom band.
o There shall be zippered side vents that have a double snap adjustment on each side.
o The side vent zippers shall measure approximately 10” long.
• Sleeves:
o The sleeves shall be two-piece, semi-modified dolman construction for complete freedom of movement.
o There shall be a black enameled eyelet located approximately ψ” up from each cuff to allow for drainage.
o The shoulder seams shall have an inside facing on the sleeve side, 1-ψ” wide, of WeatherTech ® waterproof/breathable material and taped with sealing tape to prevent leakage.
o The reinforcement patch shall be 5 sided.
o The under sleeves shall feature ventilating pit-zips with #5 Delrin zipper that measure approximately 12” long.
o The pit-zips shall be covered with a welt of shell material 12” long by ψ” wide.
• Cuffs:
o There shall be a cuff formed of two pieces of shell material approximately 1-?” wide at the bottom.
o Half of the cuff shall be heavy-duty elastic stretched and sewn with two threads.
o There shall be a cuff tab adjustment approximately 1-?” wide tapering to approximately ?” wide by 3” long with a female compression snap.
o The top half of the cuff shall be interlined and shall have three male snaps for cuff adjustment.
• Hood:
o There shall be a Val covered zipper opening for the three-piece, drop in, waterproof hood.
o The self-fabric Val cover shall measure 8-?” long.
o The hood shall be constructed of shell material and lined with a WeatherTech ® waterproof/breathable lining that shall drop in between the shell and lining at the collar.
o The hood shall be attached to the bottom of the zipper opening on the under collar.
o The under collar opening shall be approximately 1” from the neckline and 2-ψ” from end of the collar and close with a 7” nylon coil zipper.
o All hood lining joining seams shall be taped with 1” waterproof tape applied by the hot air method to prevent leakage.
o There shall be a tunneled draw cord made of nylon covered, ?” wide, black in color, threading through a channel at the perimeter of the hood.
o The draw cord shall have #3, double hole flat cord stops for hood adjustment.
• Badge Tab:
o The badge tab shall be placed in front pocket, attached with a swift tab, and shall be 3-?” in length and 1” in width unfinished for optional sewn on.
o The eyelets shall be 1-?” from the center of one oxidized metal eyelet to the center of the other oxidized metal eyelet.
• Collar:
o The collar shall be made of two-ply of the shell material with an interlining sewn to the top collar for stability and measure 3-?” high.
o The collar points shall be well shaped and symmetrical.
o There shall be a 7” nylon coil zipper opening on the under collar centered approximately 1” up from the neckline and 2-ψ” from the top of the collar edge for the drop in hood.
o There shall be 4” triangle covers on both edges of the collar to secure the optional S327 fleece liner collars when inserted into the shell parka.
• Snaps:
o All snaps shall be spring loaded, high compression snaps.
• Fleece Liner:
o Design:
▪ The garment shall be full cut, waist length intermediate weight fleece jacket with performance features designed for public safety use and shall have a full zip front to top of the collar, adjustable sleeves, wind-toggle system, waist draw cord, zippered hand warmer pockets and shall be constructed to allow for customization.
▪ All dimensions and lengths are based on men’s size large.
▪ Dimensions and lengths for all other sizes must be graded approximately.
▪ All seams shall be double needle stitched unless otherwise noted.
o Fabric:
▪ The basic fabric shall be a 100% polyester micro-filament circular knit terry, brushed, two-sided anti-pill; and shall undergo an additional vacuum or blow-out step in production (in line or off line) for maximum anti-pill performance.
▪ The jacket shall have 100% Tactel® nylon fabric reinforcements sewn on the shoulders and lower arms to add body and protection.
▪ Tactel® yarn size shall be N/F 70 D/FD x N/ATY 240 D/FD, Density shall be 156x52, weight shall be 168 g/yd, and the back coating shall be PU coated w/p 600mm.
o Body Detail:
▪ The front zipper shall be a 24” YKK Vislon zipper capable of zipping into style S3616 outer shell.
▪ There shall be an inside storm flap made of Tactel® nylon and backed with Tricot.
▪ The hand-warmer pockets shall have a 7” YKK nylon coil zipper.
▪ The hand warmer pockets shall be lined with nylon and tricot.
▪ The front yoke shall be Tactel® nylon and shall be sewn on top of the micro-fleece body.
▪ All seams shall be double needle except the sleeves, which shall be single needle.
▪ Shoulders feature mic-tabs/epaulets permanently affixed and made from same Tactel® shell fabric, inner lined with V-Max Pellon.
▪ The body of the jacket shall be tapered to allow the garment to be tucked.
▪ The sleeves shall have Tactel® nylon sewn on top of the micro-fleece beginning approximately 8-ψ” down from the shoulder seam and go all the way down to the end of the cuff.
▪ The Tactel® nylon shall only be sewn into the sleeve seam and extend approximately 13” around the circumference of the sleeve at the elbow tapering down approximately 10” at the cuff.
▪ The cuff shall be gathered and sewn with elastic and a closure tab using YKK Power hook and loop.
▪ Standard hook will not be allowed.
▪ The elbow reinforcements shall be double needle stitched except where it is sewn into the sleeve seam and shall have articulated seams as is appropriate for proper sleeve function.
▪ The inside of the sleeves shall be fully lined with smooth Tricot mesh, for wearer comfort, and ease of use.
▪ The back yoke shall be approximately 8-ψ” down from the shoulder seam and extend all the way across the back of the garment.
▪ The collar shall be made of Tactel® nylon and micro-fleece with the micro-fleece on the inside of the garment.
o Inside Detail/Pockets:
▪ Tactel ® Nylon shall be used for reinforcement on inside of garment from armholes/yoke to the base of the garment.
▪ Two inside secure pockets are to be in the garment.
▪ The left facing pocket shall be a patch pocket approximately 7” by 6” and shall be secured with a 7” YKK coil zipper sewn vertically in the front of the pocket.
▪ The right facing pocket shall be a top opening bag pocket approximately 8” wide and 10” deep.
▪ The pocket opening shall be secured using a 1-ψ” piece of YKK Power hook and loop sewn at the center of the pocket opening.
▪ There shall be a tunneled draw cord at the bottom sweep on the jacket.
▪ The tunnel shall be created by folding under the Tactel®/Fleece at base of garment.
▪ The draw cord shall be elasticized and the ends sewn down inside the tunnel at both ends and shall exit the tunnel at either side of the garment using a finished button hole.
▪ At the exits the draw cord shall have a bead and barrel lock to allow the cord to be tightened.
▪ There shall be a snap tab on each side seam on the inside of the garment approximately 3” up from the bottom to secure the elasticized shock cord when tightened.
▪ The snaps on the tabs shall be spring loaded compression snaps.
Sex: Unisex
Color: Brown
Company: Spiewak
Part Number: S3616 with S327 liner
Size Range:
Regular: S, M, L, XL, XXL, XXXL, XXXXL, XXXXXL
Long: M, L, XL, XXL, XXXL, XXXXL, XXXXXL
F-2603 Winter Jacket Hip Length
F-3120 Nametag
F-3121 Nametag Application
20. Sweater, Command
• Constructed of 70% non-pilling Acrylic and 30% long staple wool, Jersey knit.
• “V” neck styling.
• 65% polyester and 35% cotton gabardine weave forearm and elbow patches to match sweater.
• Permanent shoulder straps (Velcro closure) also made of polyester and cotton gabardine to match sweater.
• Generous-cut pattern.
• Nametag
• Nametag Application
Color: Police Navy
Sizes: Sizes stocked to 3XL
F-2503 Sweater V Neck Styling Jersey Knit (Fechheimer #00720)
F-3120 Nametag
F-3121 Nametag Application
21. Raingear Jacket
Hip-length waterproof/breathable garment which is compliant to the Class III ANSI 107:1999 standard for superior visibility. 3M Scotchlite trim, removable quilted liner, and a concealable hood.
• Viz Tech ANSI 107:1999 compliant fabric.
• Waterproof/breathable construction with sealed seams.
• Removable ThermaGuard quilt liner.
• Large lower cargo pockets.
• Radio pocket on right chest.
• Storable hood.
• Mic tabs on both shoulders.
• 3M Scotchlite silver reflective trim package.
Color: Yellow
Sizes Required: XS – 5XL
F-2719 – Raingear Jacket (Gerber Viz Tech Parka)
22. Cap, Baseball (Deck, Terminal, Unlicensed Engine Personnel)
US made, polyester knit, Texon waterproof inner visor eight rows of stitching on visor eight rows of stitching on visor, fine horsehair buckram stiffener lining inner crown from panel, black sweat band taping, finished edges in seams & around open back, plastic snap adjustable size tab.
• Patch
• Patch Application
Size: One size fits all
Color: Navy Blue (Northstar No. 200)
F-2840 Cap – Baseball (Northstar No. 200)
F-2605 Patch
F-3122 Patch Application
23. Cap Baseball, Mesh Back (Deck, Terminal, Unlicensed Engine Personnel)
US made, polyester knit, Texon waterproof inner visor eight rows of stitching on visor eight rows of stitching on visor, fine horsehair buckram stiffener lining inner crown from panel, black sweat band taping, finished edges in seams & around open back, plastic snap adjustable size tab.
• Patch
• Patch Application
Size: One size fits all
Color: Navy Blue (Northstar No. 201)
F-2841 - Cap – Baseball (Northstar No. 201)
F-2605 Patch
F-3122 Patch Application
24. Slacks, Dress, Men’s & Women's (Information and Agent Personnel)
Flat or pleated front, French fly, fully lined with button waist closure, with grass zipper, extended fly lining, tapered seat seams with lined crotch, two front and two back pockets – top and bottom and left to right bar tacked for extra strength, minimum of seven belt loops, sewn onto waist band, all seams surged and finished, permanent care and size label affixed to inside of waistband.
Color: Black, Navy, and Tan
Sizes:
Men's: Waist 28 through 50, Custom hemmed to exact length -- Women's: Size 4 through 28, Custom hemmed to exact length
Material:
Men's & Women's --65% Polyester - 35% Blend Combined Cotton
F-2585 (Men’s Black), Regular F-2591 (Women’s Black), Regular
F-2585-O/S (Men’s Black), Oversize F-2591-O/S (Women’s Black), Oversize
F-2586 (Men’s Navy) , Regular F-2592 (Women’s Navy), Regular
F-2586-O/S (Men’s Navy), Oversize F-2592-O/S (Women’s Navy), Oversize
F-2587 (Men’s Tan), Regular F-2593(Women’s Tan), Regular
F-2587-O/S (Men’s Tan), Oversize F-2593-O/S (Women’s Tan), Oversize
Material:
Men's & Women's -100%Cotton
F-2588 (Men’s Black), Regular F-2594 (Women’s Black), Regular
F-2588-O/S (Men’s Black), Oversize F-2594-O/S (Women’s Black), Oversize
F-2589 (Men’s Navy) , Regular F-2595 (Women’s Navy), Regular
F-2589-O/S (Men’s Navy), Oversize F-2595-O/S (Women’s Navy), Oversize
F-2590 (Men’s Tan), Regular F-2596(Women’s Tan), Regular
F-2590-O/S (Men’s Tan), Oversize F-2596-O/S (Women’s Tan), Oversize
25. Tie, Men’s Career Wear (Information and Terminal Agent Personnel)
Blue/Green Striped tie
Size: One size
F-3100 – Tie (Edwards # REOO-04)
26. Caps, Watch (Deck, Terminal, and Oiler Personnel)
100% wool cap, Washington State Ferries will supply patch to be sewn on front.
Patch
Patch Application
Color: Navy Blue / Bancroft Watch Cap
F-2814 - Cap, Watch
F-2605 Patch
F-3122 Patch Application
27. Cap Frame, Steamboat (Deck , Terminal, & Engine Department)
Navy Petty Officer (CPO) genuine green under, pak cap construction, black band with black vinyl visor, standard width black chin strap with gold anchor button grommet wire 5/16” white wire fill out inside of the cover, braid with CPO mount.
Sizes: 6, 6-1/4, 6-1/2, 6-3/4, 7, 7-1/4, 7-1/2, 7-3/4, & 8
F-2842- Cap, Frame Steamboat
28. Cap Cover, Steamboat (Deck, Terminal, & Engine Department)
F-2844 - Cap Cover Steamboat Bancroft 20W (White)
29. Cap Cover, Steamboat (Chief Engineer Personnel)
Size: One size fits all
F-2845 - Bancroft No. 20K Khaki collar cloth
30. Belt - Belt Works (Assistant and Chief Engineers)
Gemsco Kahki Web - Cotton, military style, webbed, slide lock solid brass buckle.
Required sizes: 44” & 60”
F-3102 Belt – Belt Works - Assist. & Chief Eng.
31. Belt - Belt Works (Deck, Terminal, Oiler, Info, and Agent Personnel)
Gemsco Navy Web - Cotton, military style, webbed, slide lock solid brass buckle. Model T-47
Required sizes: 44” & 60”
F-3103 - Belt – Belt Works - Navy Deck, Term., Oiler, Info, & Agent Personnel
32. Nametag, Military Style
Dacron/cotton broadcloth, machine washable, colorfast, dark navy blue background, rectangular shape, white embroidered block style lettering, 1/8” merrowed border, single line personalized with 45% of an inch as standard letter width, average nametag length to be 6”, letter width will reduce to accommodate longer names, ½” letter height, all thread to be light green rayon. For shirt, coverall, jacket/coat, sweater and fleece vest.
F-3120 Nametag
33. Application of Nametag – Garments
Charge to sew nametag onto garments.
• Shirts:
o One nametag ?" above right chest pocket.
• Coveralls:
o One nametag ?" above right chest pocket.
• Windbreaker:
o One nametag center right chest area.
• Winter Jacket, Waist Length:
o One nametag center right chest area.
• Winter Jacket, Hip Length, Brown:
o One nametag: outer shell, ?" above right chest pocket.
o One nametag: fleece liner, ?" above material separation on the right chest area.
• Winter Jacket, Hip Length, Navy:
o One nametag: outer shell, ?" above right chest pocket.
o One nametag: fleece liner, ?" above reflective stripe on the right chest area.
• Sweater:
o One nametag center right chest area.
• Fleece Vest:
One nametag center right chest area
F-3121 Application of Name Tag
34. Application of Emblem (Ferry Patch)– Caps, Coveralls, Fleece Vest
Charge to sew patch onto garments.
• Coveralls:
o One patch ?" above nametag.
• Winter Jacket, Hip Length, Navy:
o One patch: fleece liner, ?" above nametag.
• Winter Jacket, Hip Length, Brown:
o One patch: fleece liner, ?" above nametag.
• Fleece Vest:
o One patch ?" above nametag.
• Wool Watch Cap:
o One patch centered on front of cap.
• Baseball Caps:
o One patch centered on front of cap.
• Wide Brimmed Hat:
o One patch centered on front of cap.
F-2605 Patch
F-3122 Application of Emblem (Patch) - Garments
35. Shoulder Boards
Black shoulder boards with gold striping.
F-3123 - Shoulder Boards – Three gold stripes
F-2601 - Shoulder Boards – Four gold stripes
36. Shoulder Boards – Orange, Green, and Light Blue Stripes
Navy shoulder boards with tri-color stripes. Stripe colors are; orange, green or light blue.
F-3124 Shoulder Boards – Orange. Green, and Light Blue Stripes
37. Floatation Jacket – Stearns
Floatation jacket meets type III – USCG requirements for floatation device and ANSI recommended specification for ANSI/Department of Transportation traffic handling safety vests, original bomber style waist cut floatation jacket, insulation and floatation material unicell Soft “Suisse Aire” foam, fully coated nylon fabric shell, waterproof construction, rib knit waistband and wrist bands, full enclosed internal adjustable waist belt, international orange color fabric to meet ANSI brightness and measurement amount requirements, Hi-Vis reflective to meet ANSI specification for amount and color, 2 nylon zippered waist pockets, 2 chest pockets with Velcro flap closures, left chest pocket has removable flap for embroidery of user’s name and assigned department, 1 interior right side Velcro covered oversized pocket, full length front heavy duty nylon zipper with wide weather flap covering Velcro fastened, right interior pocket with Velcro, full waist and sleeve interior fast draining system, fleece neck lining for comfort, centered on back of jacket silk screened letters “WSF”, 2-3/4” black lettering, attached cleaning instructions. Lower navy color fabric to minimize soiling.
Brand: Stearns #1077
Sizes Required: XS – 3XL
Nametag
Embroidery on provided Nametag
Lettering
Silkscreen Lettering
F-2779 Floatation Jacket – Stearns 1077 Size: Regular and Oversize
F-2779-O/S Floatation Jacket – Stearns 1077 – Oversize
F-2604 Application of Lettering
F-2602 Embroider Name and Department on provided Nametag
38. Floatation Coat – Stearns
Floatation coat meets type III – USCG requirements for floatation device and ANSI recommended specification for ANSI/Department of Transportation traffic handling safety vests, full cut mid-length design, insulation and floatation material unicell Soft “Suisse Aire” foam, fully coated nylon fabric shell, waterproof construction, concealed hood, rib knit wrist bands, fully enclosed external waist adjustable belt, international orange color fabric to meet ANSI brightness and measurement amount requirements, Hi-Vis reflective to meet ANSI specification for amount and color, 2 nylon lower external fast draining waist pockets with zippered hand warmer compartment and Velcro flap, 2 external fast draining chest pockets with Velcro flap closures, left chest pocket has removable flap for embroidery of user’s name and assigned department, 1 interior right side, Velcro covered oversize pocket, full length 2 way heavy duty nylon zipper with wide weather flap covering Velcro fastened, full waist and sleeve interior fast draining system, fleece neck lining for comfort, centered on back of jacket silk screened letters “WSF”, 2-3/4” black lettering, attached cleaning instructions. Lower navy color fabric to minimize soiling.
Brand: Stearns #1055
Sizes Required: XS – 3XL
Nametag
Nametag Application
Silkscreen Lettering
Application of Lettering
Product # Description
F-2780 Floatation Coat – Stearns 1055 Size: Regular and Oversize
F-2780-O/S Floatation Jacket – Stearns 1055 – Oversize
F-2604 Application of Lettering
F-2602 Embroidery on provided Nametag
39. Embroidery of Name and Department
Embroider Name and Department on provided Nametag for items 37 & 38
F-2602 Embroidery provided on Nametag
40. Fleece Vest
Hip length fleece vest. Anti Pill finish, 13 ounce light weight, 100% filament polyester R-TEC fleece. Twill taping inside the neck. Armholes and waistband trimmed in Lycra. Zip closed front and two (2) zip closed side pockets – (one (1) on each side).
Sizes: Regular and Oversize
Color: Navy
F-3125 Fleece Vest
F-3125 -O/S Fleece Vest – Oversize
F-3120 Nametag
F-3121 Application of Nametag
F-2605 Patch
F-3122 Application of Patch
41. Wide Brimmed Hat
100% cotton, 3 ounce light weight, 2" brim, and four (4) stitched eyelets. Three panel construction with a self fabric sweat band.
Sizes: S, M, L, and XL
Patch
Patch Application
Color: White
F-3126 Hat
F-2605 Patch
F-3122 Application of Patch
42. Silkscreen Lettering
43. Patch - emblem
F-2604 Application of Silkscreen Lettering
46. Washington State Ferries (WSF) Break Away Vest
8415 Break-away Vest
This vest, for use by Washington State Ferries, shall be constructed to be ANSI/ISEA 107-2004 certified Class 2 for sizes Medium and Larger and in the style of class 2 for size Small and Xsmall. This Vest has neither shoulder seams nor side seams for easy exit. Both shoulders are open and fastened by hook and loop fasteners. Both sides are open and fastened by hook and loop fasteners.
Vest Material:
Fluorescent green 100% polyester, 2.95 ounce per square yard, fabric finished with a DWR (Durable Water Repellency
Hook and Loop:
Hook and Loop is 1.5" width YKK SmartTouch. Color of Hook and Loop is to match the Vest material.
Reflective Material:
The reflective material shall be high intensity tape and be applied in the center of the exposed face of the Grosgrain (item #1 above). The Scotchlite or equal material shall be heat fused to the grosgrain.
4.5"(112mm) wide safety orange Grosgrain 100% polyester or equal.
2"(50mm) 3M Scotchlite Silver or equal.
Reflective Striping:
Horizontal Striping:
One (1) continuous 360° 2" (50mm) 3M Scotchlite silver reflective band (or equal) sewn horizontally, approximately 6” (150mm) up from the bottom edge of the vest.
Vertical Striping:
Two (2) continuous 2"(50mm) 3M Scotchlite silver reflective bands sewn vertically centered over the left and right breast. 1” (25mm) interrupt of vertical reflectivity to differentiate the gap between the top of the right pencil pocket and the top of the calculator/cell phone pocket.
Vest Pockets:
Exterior Pockets:
Two(2) each lower pockets
1. Approximately " 8 long by 6" (150mm) wide with hook and loop closure centered at top.
2. Base of this pocket to be aligned with bottom hem and side hook and loop. Top of pockets to be aligned at the bottom of the horizontal stripe.
3. Exterior of pocket should maintain line of vertical reflective band
Radio Pocket:
Exterior upper right breast, pocket to be located as follows:
1. Centered with vertical trim
2. Base of pocket to begin at top of horizontal trim
3. Antenna loop to be placed between reflective bands and 3/4" above the bottom layer of this two-layered pocket.
Pocket Dimensions and Construction:
Pencil Pockets:
1. The top layer consists of a pencil pockets approximately 6” by 7.75”, with three pencil sections evenly divided approximately 2” wide each.
2. The deeper pocket (just behind the pencil pocket) is approximately 6” by 8.75”, 1” higher than the top pencil pocket, and full depth to permit radios, cell phones, calculators.
3. Deep pockets shall have one hook and loop closure at the top. These hook and loop closures will be attached with box stitching and will be applied to the hook and loop, loop will be on the outside of the pocket and the hook on the inside, closest to the body
4. Antenna loop will be approximately 2" wide and 2.5" in length, made with the vest body fabric. This antenna loop will have matching 0.5" hoop and loop closure opening to the inside of the garment
Hook and Loop Closure Placement:
Interior of left front:
1. Loop on full length of shoulder
2. Loop on full length of side
3. Hook on center front, 3 each extending approximately 3"(75mm) from center of vest spaced equally beginning approximately 2"(50mm) from bottom of vest and 1"(25mm) from front neckline (bias).
Interior of right front:
Loop on full length of shoulder
Loop on full length of side
Exterior of right front:
Loop on center front, 3 each extending 3" from center of vest spaced equally beginning 2" from bottom of vest and 1" from front neckline
Exterior of back:
Exterior of back piece:
Hook on full length of both shoulders
Hook on full length of both sides.
CONTRACT ITEM PRICES
|PRODUCT |DEPARTMENT |WSF 2009 |PRICE |
| | |Line# | |
|1. Trouser |F-2687 (Men’s Poly Blend) |1 2 |$34.65 * |
| |F-2688 (Women’s Poly Blend) |3 4 |$34.65 * |
| |F-2580 (Men’s 100% Cotton) | |$46.20 * |
| |F-2581 (Women’s 100% Cotton) | |$46.20 * |
|2. Pant, Jean Cut |F-2689 (Men’s) |5 |$19.64 * |
|3. Shirt, Short Sleeve w/ Nametag |F-2553 (Men’s) (Tall sizes = $39.72) |19 22 |$30.56 * |
| |F-2554 (Women’s) |25 |$30.56 * |
| |F-2571 (Men’s 100% Cotton) | |$40.16 * |
|4. Shirt, Long Sleeve w/ Nametag |F-2555 (Men’s) (Tall sizes = $41.63) |29 32 |$32.03 * |
| |F-2556 (Women’s) |35 |$32.03 * |
| |F-2578 (Men’s 100% Cotton) | |$44.63 * |
|5. Shirt, Short Sleeve, Men’s & Women’s w/ Nametag |F-2557 (Poly Blend-Men’s) |20 |$30.56 * |
| |(Tall sizes = $39.72) |T 23 | |
| |F-2558 (Women) |26 |$30.56 * |
| |F-2569 (Men’s 100% Cotton) | |$40.16 * |
|6. Shirt, Long Sleeve, Men’s & Women’s (Poly Blend) w/ Nametag|F-2559 (Navy Blue-Men’s) |30 T |$32.81 * |
| |(Tall sizes = $42.66) |33 36 | |
| |F-2560 (Navy Blue-Women’s) | |$33.08 * |
| |F-2570 (Navy Blue100%Cotton) | |$44.63 * |
|7. Shirt, Short Sleeve, Men’s & Women w/ Nametag |F-2561 (Men’s) (Tall sizes = $39.72) |21 24 |$30.56 * |
|Men’s 100% Cotton w/ Nametag |F-2562 (Women’s) |27 |$30.56 * |
| |F-2579 | |$40.16 * |
|8. Shirt, Long Sleeve, Men’s & Women’s w/ Nametag |F-2563 (Men’s poly-blend) |31 T |$32.81 * |
|100% Cotton w/ Nametag |(Tall sizes = $42.66) |34 37 | |
| |F-2564 (Women’s poly-blend) | |$32.03 * |
| |F-2573 (100% Cotton) | |$44.63 * |
|9. Shirt, Short Sleeve, Men’s w/ Nametag |F-2574 (Men’s) |NA NA |$36.35 |
| |F-2575 (Women’s) |28 |$36.35 |
| |F-2582 (Men’s 100%) | |$18.38 * |
|10. Shirt, Long Sleeve, Men’s and Women’s w/ Nametag |F-2576(Men’s) |NA NA |$41.45 |
| |F-2577 (Women’s) |38 |$41.45 |
| |F-2583 (Men’s 100% Cotton) | |$19.85 * |
|11. Trouser, Suntan |F-2691 (Poly Blend) |NA 6 |$52.68 |
| |F-2584 (Men’s 100% Cotton) | |$23.63 * |
|12. Coveralls (Zipper) w/Nametag and Patch |F-2748 (Cotton)Navy |39 40 |$32.81 * |
| |F-2597 (Cotton)White |41 |$31.50 * |
| |F-2598 (Cotton)Fisher | |$32.34 * |
|13. Coveralls (Button) w/Nametag and Patch |F-2749 (Cotton) |42 43 |$33.08 * |
| |F-2599(Cotton) White |44 |$30.98 * |
| |F-2600(Cotton)Fisher | |$31.50 * |
| | | | |
|PRODUCT |DEPARTMENT |WSF 2009 |PRICE |
| | |Line# | |
|14. Winter Jacket, Waist length w/ Nametag (New spec |F-2774 (Gerber 70M1) |47 |$155.40 * |
|7/1/2009) | | | |
|Sizes 4XL & 5XL |F-2774 (Gerber 70M1) | |$186.48 * |
|15. Winter Jacket, Waist Length w/ Nametag |F-2775 (Gerber 30J) |49 |$161.70 * |
|Sizes 4XL & 5XL | | | |
| |F-2775 (Gerber 30J) | |$194.04 * |
|16. Reversible Jacket, Men’s and Women’s w/ Nametag |F-2772 (Gerber Thriller X) |46 |$127.58 * |
|Sizes 4XL & 5XL | | | |
| |F-2772 (Gerber Thriller X) | |$153.09 * |
|17. Winter Jacket, Hip Length, Men’s and women’s w/ Nametag |F-2778 |48 |$148.58 * |
|Sizes 4XL & 5XL | | | |
| |F-2778 | |$178.29 * |
|18.Raingear Pants |F-2930 |53 |$166.95 |
|19. Winter Jacket, Hip-length w/ Nametag |F-2603 (jacket S3616 @ $108.68 |50 |$207.28 * |
|Sizes 4XL & 5XL |and S327 liner @ $98.60) | | |
| |F-2603 (jacket S3616 @ $119.55 | |$228.01 * |
| |and S327 liner @ 108.46) | | |
|20. Sweater w/ Nametag |F-2503 |55 |$47.78 * |
|21. Raingear Jacket |F-2719 |54 |$131.25 |
|Sizes 4XL & 5XL |F-2719 | |$157.50 * |
|22. Cap Baseball w/ Patch |F-2840 |57 |$8.30 * |
|23. Cap Baseball, Mesh Back w/ Patch |F-2841 |58 |$8.93 * |
|24. Slacks, Dress, Men’s & Women's (Poly/Cotton Blend) | | | |
|↓ |F-2585 (Men’s Black) |7 |$27.20 * |
|↓ |F-2585-O/S (Men’s Black) | |$29.91 * |
|↓ |F-2586 (Men’s Navy) |8 |$27.20 * |
|↓ |F-2586-O/S (Men’s Navy) | |$29.91 * |
|↓ |F-2587 (Men’s Tan) |9 |$27.20 * |
|↓ |F-2587-O/S (Men’s Tan) | |$29.91 * |
|↓ |F-2591 (Women’s Black) |10 |$27.20 * |
|↓ |F-2591-O/S (Women’s Black) | |$29.91 * |
|↓ |F-2592 (Women’s Navy) |11 |$27.20 * |
|↓ |F-2592-O/S (Women’s Navy) | |$29.91 * |
|↓ |F-2593 (Women’s Tan) |12 |$27.20 * |
|(100% Cotton) |F-2593-O/S (Women’s Tan | |$29.91 * |
|↓ |F-2588 (Men’s Black) |13 |$27.83 * |
|↓ |F-2588-O/S (Men’s Black) | |$30.61 * |
|↓ |F-2589 (Men’s Navy) |14 |$27.83 * |
|↓ |F-2589-O/S (Men’s Navy) | |$30.61 * |
|↓ |F-2590 (Men’s Tan) |15 |$27.83 * |
|↓ |F-2590-O/S (Men’s Tan) | |$30.61 * |
|↓ |F-2594 (Women’s Black) |16 |$27.83 * |
|↓ |F-2594-O/S (Women’s Black) | |$30.61 * |
|↓ |F-2595 (Women’s Navy) |17 |$27.83 * |
|↓ |F-2595-O/S (Women’s Navy) | |$30.61 * |
|↓ |F-2596 (Men’s Tan) |18 |$27.83 * |
| |F-2596-O/S (Men’s Tan) | |$30.61 * |
|PRODUCT |DEPARTMENT |WSF 2009 |PRICE |
| | |Line# | |
|25. Tie, Men’s Career Wear |F-3100 |63 |$13.55 |
|26. Caps, Watch w/ Patch |F-2814 |59 |$9.35 * |
|27. Cap Frame, Steamboat |F-2842 |NA |$29.47 |
|28. Cap Cover, Steamboat |F-2844 (20W) |61 |$39.80 |
|29 Cap Cover, Steamboat |F-2845 |62 |$39.80 |
|30. Belt - Belt Works |F-3102 |65 |$4.41 * |
|31. Belt - Belt Works |F-3103 |64 |$4.41 * |
|32. Nametag, Military Style |F-3120 |66 |$4.73 * |
|33. Application of Nametag |F-3121 |67 |$1.05 * |
|34. Application of Emblem Patch |F-3122 |68 |$1.58 |
|35. Shoulder Boards |F-3123 (3 stripes) |NA NA |Call for Quote |
| |F-2601 (4 stripes) | |Call for Quote |
|36. Shoulder Boards |F-3124 |NA |Call for Quote |
|37. Flotation Jacket – Stearns w/Embroidery and Lettering |F-2779 |51 |$261.45 |
| |F-2779-O/S | |$282.45 |
|38. Flotation Coat- Stearns w/Embroidery and Lettering |F-2780 |52 |$225.75 * |
| |F-2780-O/S | |$246.75 * |
|39. Embroidery – Name & Dept. |F-2602 |69 |$9.98 * |
|40. Fleece Vest w/Nametag and Patch |F-3125 |56 |$27.20 * |
| |F-3125-O/S | |$31.40 * |
|41. Wide Brimmed Hat W/Patch |F-3126 |NA |$28.99 |
|42. Silkscreen Lettering |F-2604 |70 |$1.50 * |
|43. Emblem (Patch) |F-2605 |NA |$2.50 |
|44. Coveralls (Zipper) w/Nametag and Patch |F-2607 (Navy) NEW ITEM |45 |$34.50 |
|45. Wide Brimmed Hat – Outback Style W/Patch |F-2846 NEW ITEM |60 |$9.35 |
|46. Break Away Vest |8415- See Size/Price Table Below |
|Break Away Vest – (Prices include WSF Logo) |
|Commodity Code |Mfg. # |Size |1 to 5 |6 to 24 |24 to 50 |51+ |
|8415-183-054 | 996WSF/S |Small |$34.75 |$34.75 |$34.75 |$34.75 |
|8415-183-055 | 996WSF/M |Medium |$34.75 |$34.75 |$34.75 |$34.75 |
|8415-183-057 | 996WSF/L |Large |$34.75 |$34.75 |$34.75 |$34.75 |
|8415-183-059 | 996WSF/XL |XL |$34.75 |$34.75 |$34.75 |$34.75 |
|8415-183-062 |996WSF/2XL |2XL |$36.25 |$36.25 |$36.25 |$36.25 |
|8415-183-065 |996WSF/3XL |3XL |$37.75 |$37.75 |$37.75 |$37.75 |
|8415-183-068 |996WSF/4XL |4XL |$40.50 |$40.50 |$40.50 |$40.50 |
|1999-023-343 |996WSF/5XL |5XL |$42.50 |$42.50 |$42.50 |$42.50 |
Alteration Price List
|Coat - Jacket |Price Each Item |
|Shorten or Lengthen Sleeves Unlined |$7.88 * |
|Shorten or Lengthen Sleeves Lined |$16.28 |
|Replace Zipper Windbreaker |$13.13 * |
|Replace Zipper Winter Jacket |$17.33 * |
|Replace Zipper Raingear Jacket NEW |$16.28 |
|Replace Zipper Fleece Vest |$13.13 * |
|Pants |Price Each Item |
|Shorten or Lengthen |$7.88 |
|Take In or Let Out Waist |$8.93 |
|Take In or Let Out Seat |$8.93 |
|Replace Zipper |$9.98 * |
|Maternity Panel |$16.28 * |
|Shirts |Price Each Item |
|Shorten or Block Body |$4.73 * |
|Make Long Body / add tails |$12.50 |
|Make Maternity |$13.13 * |
|Coveralls |Price Each Item |
|Shorten Sleeves |$7.88 |
|Shorten Legs |$7.88 |
|Other |Price Each Item |
|Repairs or Shop Time on an Hourly Basis |$36.00 |
SPECIAL TERMS & CONDITIONS
SCOPE OF CONTRACT
This contract is for the purchase of Correctional Industries' (CI) products. This contract is a convenience use contract for Washington State Ferries (DOT). CI is the first source of supply for products.
Important Note
Pursuant to RCW 43.19.534, state agencies and departments shall purchase for their use any required goods and services that are produced or provided in whole or in part from class II inmate work programs operated by CI. Unless CI has granted an authorized exemption, any state agency or department who purchases from another source may be in direct violation of state law. In the event that state law has been violated, CI reserves the right to insist upon the strict performance of this contract and pursue any other remedies available by law.
This contract was established in accordance with Revised Code of Washington 43.19.534, which provides the basis for mandatory purchases under this contract. In accordance with statute, if a Washington State manufacturer exists and meets exemption criteria identified in the Exemption Form (refer to Attachment entitled Exemption Form), an exemption will be allowed by CI. Revised Code of Washington 43.19.190 is superseded by the statute, which is the foundation of this contract, therefore the Best Buy Provisions do not apply to this contract. However, in circumstances where CI cannot meet your required delivery timeframe (i.e. end of biennium requirements, etc.) or the contract delivery term, CI may grant a one-time exception, reviewed on a case by case basis, contact John Kirk at (360) 725-9136 for further information.
CUSTOMER: WASHINGTON STATE FERRIES (WSDOT)
TERM OF CONTRACT
Contract term shall be in accordance with RCW 43.19.534. This contract shall be effective 12/01/2006
The parties agree to meet, if necessary, every 18 months to negotiate any modifications of any terms or conditions that may be of concern to either party. If a concern over a term or condition arises prior to the regularly scheduled meeting, the parties will schedule a special meeting and negotiate in good faith over a modification of that term or condition.
If, during the course of the contract term, RCW 43.19.534 is amended to eliminate the mandatory element, this contract will automatically convert to a convenience use contract after 60 days, unless otherwise specifically stipulated by the legislature. Contract was converted to “Convenience” use effective 7/13/2009 (See page 1)
In the event this contract converts to convenience use, the following will also become part of the convenience use contract: In the event of on-going non-performance of contractual requirements, the OSP may do one or more of the following: terminate this contract, impose liquidated damages, or exercise any remedy provided by law.
CONTRACT EXTENSION
The Contracts and Legal Service and CI reserve the right to extend this contract for additional contract terms or portions thereof. Contract extensions shall be subject to mutual agreement between Contracts and Legal Services and CI. Contracts and Legal Services or CI shall respond within thirty (30) calendar days following receipt of a request for extension.
CONTRACTOR'S REPRESENTATION
Responsibility: CI’s Customer Service agents and sales representative(s) shall function as the primary point of contact, ensuring all supervision, coordination and corrective action be taken as necessary to meet contractual requirements.
Availability: CI’s Customer Service agents and sales representative(s) shall be readily available during normal business hours (8:00 AM- 3:45 PM Pacific Standard Time Monday through Friday) throughout the term of this contract. The representative(s) shall respond to a customer call within one business day from their initial call.
CI shall maintain sufficient sales representatives to ensure adequate coverage throughout the state. Sales representative will be responsible for providing correct order/product information. Sales staff shall be capable of assisting customers with product information, technical data, compatibility, order status information, etc.
CI shall maintain sufficient internal office staff to assist in price, availability, order processing, modifications, and to review orders for accuracy prior to order entry. The contract users will provide a toll free number.
PAYMENT TERMS
1% 30 days/Net 30 days. Payment should be made after receipt of product/service and the receipt of an acceptable invoice from CI. When there are damaged item(s) or there are other factors making replacement of item(s) necessary, payment should be made on all undamaged goods received and invoiced for without regard to the resolution of the item(s) in question. Payment for item(s) in question is to be processed upon satisfactory fulfillment of CI’s contractual obligations and receipt of invoice.
SHIPPING LOCATIONS
Authorized users of this convenience purchase contract have various locations where goods are to be shipped; therefore, CI will ship to any location throughout the state upon customer’s request at no additional cost. Most goods will be shipped to actual end-users (1200 employees) home address. As of December 2009 WSF has a few employees that live in Oregon and one in Texas.
CONTRACT SPECIFIC CATALOG
CI shall update and distribute a contract specific catalog (via mail or electronically) to each principal contract user, at CI's sole expense. The catalog shall include all items available on contract, contract pricing, all applicable literature, CI is solely responsible for catalog count, based on historical data. However, a distribution list will be provided to CI by Contracts and Legal Services. Original set and subsequent distributions are to be provided for Contracts and Legal Services approval prior to distribution with a minimum of thirty (30) day notice. Initial catalog must be kept current. Periodic distribution of subsequent catalog changes shall all be made in the same format.
PURCHASE ORDER ACKNOWLEDGMENT
CI will acknowledge orders in writing within five (5) business days after receipt of an accurate and complete order. An order is not considered received until all information provided by the customer for the product, billing, and shipping data is complete and accurate. Order acknowledgments will be sent to the customer's “Bill to” address, unless otherwise requested by the customer.
The acknowledgment shall include field/purchase order number, ship to address, items ordered, contract pricing, and ship date. CI shall send only one order acknowledgment per order (unless subsequent changes need to be acknowledged), which shall be a consistent form recognized by their customers, and checked for accuracy prior to mailing.
Written field orders mailed or faxed to CI are preferred. Due to the possibility of errors, CI may refuse to accept telephone orders.
Alternate or additional terms and conditions accompanied with a purchase order acknowledgment are unacceptable; the terms and conditions incorporated herein prevail.
FAX ORDERS
CI will accept fax orders, provided:
a) Customer must send their order with a cover sheet showing how many pages are included in the fax and verify fax transmission report reflects the correct number of pages sent via fax.
b) If a written confirming order is mailed to CI, it must be marked as a "confirming order" and specify the date that the fax order was previously transmitted to CI.
c) Customer is responsible for cancellation or return charges should a double order occur because the written order was not properly identified as a "confirming order".
ORDER CANCELLATION & CHANGE ORDERS
The customer may cancel or change orders for standard contract items without penalty within five (5) business days from postmark date of order acknowledgment. After this period, CI may impose a 25% penalty of the item(s) being canceled and/or changed. Delivery/installation is exempt from cancellation penalties.
If a customer cancels an order for custom items, CI may impose up to a 100% penalty of the item(s) being canceled.
PACKAGING
Specifications: Unless otherwise specified, goods are to be shipped in new and undamaged condition and packaged in accordance with shipping industry standards. Goods shipped in other than industry standard packaging, as requested by the customer, shall be at an additional cost and risk to the customer.
Labeling: Individual shipping cartons shall be labeled with the name of the ordering customer, order number, contractor and product number. Product will be identified with the date of manufacture and batch number. If requested by the customer, carton labels shall include tag or location numbers and floor/room numbers.
SHIPPING INSTRUCTIONS
All goods are to be shipped prepaid to Washington State Ferries in any amount to any delivery location within the state of Washington. All freight charges will be added to Invoice as a separate line item. Will Call Service is available.
Partial shipments: Partial shipments are acceptable unless the purchaser indicates otherwise on the order document.
DELIVERY
All goods delivered under this contract shall be delivered within 30 days after receipt of order (ARO)
CI PERFORMANCE AS A CONTRACTOR
A. General Requirements: The Contracts and Legal Services, in conjunction with contract users, monitors and maintains records of CI performance. Said performance shall be a factor in considering further extensions of this contract. Customers are provided with product/service performance report forms that are forwarded to CI and to the contract administrator.
B. Non-Performance: Nonperformance of contractual requirements or stipulations shall constitute cause for either party to seek any remedy provided for in this contract or allowed by law.
PRICING AND ADJUSTMENTS
A. Firm/Fixed: Pricing will be firm and fixed for the initial 180 days after the effective date of the contract, except as noted in paragraph below.
B. Adjustments:
1. Prices shall remain unchanged for at least 180 days after the effective date of the contract. Adjustments in contract pricing will be allowed on a pass-through basis only. CI shall provide adequate documentation to justify said increases. Approved price adjustments shall remain unchanged for at least 365 days thereafter. A minimum of sixty (60) days advance written notice to the Contracts and Legal Services is required for adjustments. If more than 20% of the product specific portion of the CI catalog is outdated, then a new catalog will be printed and distributed, at CI’s sole expense.
ESTIMATED USAGE
$750,000.00/2- year period. Estimated usage data as stated herein shall not bind the state (Contracts and Legal Services and the customers) to the purchase of said quantities. Usage estimates are based strictly upon past historical data and may not reflect future requirements.
USAGE REPORTS
A quarterly Sales and Subcontractor Report shall be submitted in the format provided by the Office of State Procurement. You can get the report electronically at . Total purchases for each State Agency, University, Community and Technical Colleges must be shown separately. Total purchases for all political subdivisions and non-profit organizations may be summarized as one customer. Additionally, all purchases by the State of Oregon or other purchasers must be reported as an aggregate total. Reports are due thirty (30) days after the end of the calendar quarter, i.e., April 30th, July 31st, October 31st and January 31st. CI shall submit reports of sales on this contract in the format provided (refer to Attachment entitled Usage Report). Such reports will be submitted on a quarterly basis. Contracts and Legal Services may require additional reports to support management of this contract.
RETENTION OF RECORDS
CI shall retain all records relating to this contract for a period of five (5) years following the date of final payment or completion of any required audit, whichever is earlier. Any authorized representative of the state or federal government (where federal funds are involved) shall have access to and the right to examine, audit, excerpt, and transcribe all said records within a reasonable time.
ORDER OF PRECEDENCE
In the event of any inconsistency in this agreement, unless otherwise provided herein, the inconsistency shall be resolved by giving precedence in the following order:
a) Applicable Federal and State Statues and Regulations;
b) Special terms and conditions; and
c) Standard terms and conditions.
ALTERATIONS AND AMENDMENTS
CI and Contracts and Legal Services may mutually amend this agreement. Such amendments shall not be binding unless they are in writing and signed by personnel authorized to bind CI and Contracts and Legal Services.
MATERIALS, WORKMANSHIP, AND QUALITY CONTROL
CI shall be required to furnish all materials, equipment and/or services necessary to perform contractual requirements. Materials and workmanship in the construction of equipment for this contract shall conform to all codes, regulations and requirements for such equipment, specifications contained herein, and the normal uses for which intended. Materials shall be manufactured in accordance with the best commercial practices and standards for this type of equipment.
It is the policy of Correctional Industries to provide its customers with products and services that conform to their specifications and quality requirements. CI’s goal is to achieve a constant high standard of quality while maintaining economical operations. Adherence to the precepts of this directive will ensure a level of quality consistent with management’s objectives and CI’s mission.
OSHA AND WISHA REQUIREMENTS/SAFETY STANDARDS
CI agrees to comply with conditions of the Federal Occupational Safety and Health Acts of 1970 (OSHA), as may be amended, and, if it has a workplace within the state of Washington, the Washington Industrial Safety and Health Act of 1973 (WISHA), as may be amended, and the standards and regulations issued thereunder and certifies that all items furnished and purchased under this order will conform to and comply with said standards and regulations. CI further agrees to indemnify and hold harmless customer from all damages assessed against customer as a result of CI's failure to comply with the acts and standards thereunder and for the failure of the items furnished under this order to so comply. All products shall meet ANSI standards and applicable federal and state laws.
TAXES:
WAC 458-20-189 governs state sales tax from state agencies or institutions. Office of Code Reviser
STANDARD TERMS & CONDITIONS
ENTIRE AGREEMENT
This document, including all addenda and subsequently issued change notices, comprises the entire agreement between the State of Washington and the Contractor and shall be governed by the laws of the State Of Washington incorporated herein by reference. The venue for legal action shall be the Superior Court for the State Of Washington, County of Thurston.
CONFLICT AND SEVERABILITY
Conflict. In the event of conflict between contract documents and applicable laws, codes, ordinances or regulations, the most stringent or legally binding requirement shall govern and be considered a part of this contract to afford the state maximum benefits.
Severability. Any provision of this document found to be prohibited by law shall be ineffective to the extent of such prohibition without invalidating the remainder of the document.
NONDISCRIMINATION AND AFFIRMATIVE ACTION
Acceptance of this contract binds the contractor to the terms and conditions of Section 601, Title VI, Civil Rights Act of 1964, as may be amended:
In that "No person in the United States shall, on the grounds of race, color, national origin, sex or age, be excluded from participation in, be denied the benefits of, or be subject to discrimination under any program or activity receiving Federal financial assistance." In addition, "No otherwise qualified handicapped individual in the United States shall, solely by reason of his handicap, be excluded from the participation in, be denied the benefits of, or be subjected to discrimination under any program or activity receiving Federal financial assistance."
Unless exempted by Presidential Executive Order #11246, as may be amended or replaced and applicable regulations thereunder, Contractor shall not discriminate against any employee or applicant for employment.
WORKERS RIGHT TO KNOW
WAC 296-62-054 requires that all manufacturers/distributors of hazardous substances, including any of the items listed on this bid/quote/contract bid and subsequent award, must include with each delivery completed Material Safety Data Sheets (MSDS) for each hazardous material. Additionally, each container of hazardous material must be appropriately labeled with:
-The identity of the hazardous material,
-Appropriate hazardous warnings, and
-Name and address of the chemical manufacturer, importer or other responsible party.
Appropriate fines may be levied by Labor and Industries against employers for noncompliance and agencies may withhold payment pending receipt of a legible copy of the MSDS. It should be noted that OSHA Form 20 is not acceptable in lieu of this requirement unless it is modified to include appropriate information relative to "carcinogenic ingredients" and "routes of entry" of the product(s) in question.
GIFTS AND GRATUITIES
In accordance with RCW 43.19.1937 and 1939, it is unlawful for any person to directly or indirectly offer, give or accept gifts, gratuities, loans, trips, favors, special discounts, services, or anything of economic value in conjunction with state business practices.
RIGHTS AND REMEDIES
In the event of any claim for default or breach of contract, no provision in this document or in the bidder's offer shall be construed, expressly or by implication, as a waiver by the state of any existing or future right and/or remedy available by law. Failure of the state to insist upon the strict performance of any term or condition of the contract or to exercise or delay the exercise of any right or remedy provided in the contract or by law, or the acceptance of (or payment for) materials, equipment or services, shall not release the Contractor from any responsibilities or obligations imposed by this contract or by law, and shall not be deemed a waiver of any right of the state to insist upon the strict performance of the contract.
SAVE HARMLESS
Contractor shall indemnify, defend and save harmless the Department of Enterprise Services and all other contract users from any and all claims, demands, suits, actions, proceedings, losses, costs and damages of every
kind and description, including any attorneys' fees and/or litigation expenses, which may be brought or made against or incurred by the Department of Enterprise Services on account of losses of or damage to any property or for injuries to or death of any person, caused by, arising out of, or contributed to, in whole or in part, by reasons of any act, omission, professional error, fault, mistake or negligence of Contractor, Contractor's employees, agents, representatives or subcontractors, their employees, agents, representatives, and inmates in connection with or incidental to the performance of this agreement
PERSONAL LIABILITY
It is agreed by and between the parties hereto that in no event shall any official, officer, employee or agent of the State of Washington be in any way personally liable or responsible for any covenant or agreement herein contained whether expressed or implied, nor for any statement or representation made herein or in any connection with this agreement.
ADVERTISING
Contractor shall not advertise or publish information concerning this contract in any form or media without prior written consent from the Contract Administrator.
TAXES, FEES AND LICENSES
A. Taxes. Contractor shall pay for and maintain in current status any and all taxes which are necessary for contract performance. Unless otherwise indicated, the purchaser agrees to pay all State of Washington sales or use taxes. No charge by Contractor shall be made for federal excise taxes and the purchaser agrees to furnish Contractor with an exemption certificate, where appropriate. Sales tax shall not be included in bid pricing submitted.
B. Fees/Licenses. Prior to bid opening the Contractor shall pay for and maintain in a current status, any license fees, assessments, permit charges, etc., which are necessary for contract performance. It is the contractor's sole responsibility to monitor and determine any changes or the enactment of any subsequent regulations for said fees, assessments or charges and to immediately comply with said changes or regulations during the entire term of this contract.
LIENS, CLAIMS AND ENCUMBRANCES
All materials, equipment or services shall be free of all liens, claims, or encumbrances of any kind and if the state requests, a formal release of same shall be delivered to the state.
TITLE AND RISK OF LOSS
Regardless of FOB point, Contractor agrees to bear all risks of loss, injury or destruction of goods and materials ordered herein which occur prior to delivery and acceptance. Such loss, injury or destruction shall not release Contractor from any obligation hereunder.
PERFORMANCE
Acceptance by the purchaser of unsatisfactory performance with or without objection or reservation shall not waive the right to claim damage for breach nor constitute a waiver of requirements for satisfactory performance of any obligation remaining to be performed by Contractor.
IDENTIFICATION
All invoices, packing lists, packages, instruction manuals, correspondence, shipping notices, shipping containers and other written documents affecting this contract shall be identified by the applicable purchase order or field order number. Packing lists shall be enclosed with each shipment, indicating the contents therein.
CHARGES FOR HANDLING
No charges will be allowed for handling which includes but is not limited to packing, wrapping, bags, containers or reels, unless otherwise stated herein.
INVOICING
Contractor shall provide an original and two (2) copies of invoices. Each invoice shall be submitted as required by the contract and shall reference the contract and field order or purchase order number. Invoices shall be properly annotated with applicable prompt payment discount(s).
Requirements for invoices:
1. WSF must receive two complete sets of invoices (one original and one copy).
2. All invoices must be sent in batches once a month.
3. All batches must include a spreadsheet as a cover sheet with all the orders grouped together.
4. All grouped orders must be in numerical order per department. The departments are distinguished by the Purchase Order number. WSF-D-###### is for the deck department, WSF-E-###### is for the engine department, WSF-S-###### is for the shops, and WSF-T-###### is for the terminal department.
5. All spreadsheets must include group totals for each department and a grand total for the entire batch.
6. All invoices must include a copy of the original order that was sent by WSF and a copy of the packing slip.
7. The spreadsheet must contain the following information:
a. A header with the Vendor's name and remit address.
b. The date the batch was created.
c. WSF Purchase Order number.
d. Invoice number.
e. Invoice date.
f. Invoice amount.
g. Page numbers if the spreadsheet is longer than one page.
h. The font of the spreadsheet needs to be legible. The font needs to be Times New Roman in font size 12.
8. All invoices and spreadsheets must be computer generated.
PAYMENT
Payment will be made by the purchasers indicated on ordering document. Any bid that requires payment in less than thirty (30) calendar days need not be considered. Prompt payment discount periods of thirty (30) calendar days or more will be considered in determining the apparent lowest responsible and responsive bid. Invoices will not be processed for payment nor will the period of cash discount commence until receipt of a properly completed invoice and until all invoiced items are received and satisfactory performance of Contractor has been attained. If an adjustment in payment is necessary due to damage or dispute, the cash discount period shall commence on the date final approval for payment is authorized. Under "Chapter 39.76 RCW", if purchaser fails to make timely payment(s), Contractor may invoice for 1% per month on the amount overdue or a minimum of $1.00. Payment will not be considered late if a check or warrant is mailed within the time specified. If no terms are specified, net 30 days will automatically apply. Payment(s) made in accordance with contract terms shall fully compensate the Contractor for all risk, loss, damages or expense of whatever nature and acceptance of payment shall constitute a waiver of all claims submitted by Contractor.
CHANGES
No alteration in any of the terms, conditions, or contractual requirements herein shall be effective without the written consent of the Contract Administrator as evidenced by issuance by the state of a current contract information.
ADDITIONS OR DELETIONS
The state reserves the right to add or delete items, authorized purchasers or locations as determined to be in the best interest of the state. Added items, agencies or locations will be related to those on contract and additions or deletions will not represent a significant increase or decrease in size or scope of the contract. Such additions or deletions will be by mutual agreement, will be at prices consistent with the original bid price margins, and will be evidenced by issuance of written current contract information from the Contract Administrator.
FORCE MAJEURE.
A. Definition: Except for payment of sums due, neither party shall be liable to the other or deemed in default under this contract if and to the extent that such party's performance of this contract is prevented by reason of force majeure. The term "force majeure" means an occurrence that is beyond the control of the party affected and could not have been avoided by exercising reasonable diligence. Force majeure shall include acts of God, war, riots, strikes, fire, floods, epidemics, or other similar occurrences.
B. Notification: If either party is delayed by force majeure, said party shall provide written notification within forty-eight (48) hours. The notification shall provide evidence of the force majeure to the satisfaction of the other party. Such delay shall cease as soon as practicable and written notification of same shall be provided. The time of completion shall be extended by contract modification for a period of time equal to the time that the results or effects of such delay prevented the delayed party from performing in accordance with this contract.
C. Rights Reserved: The state reserves the right to cancel the contract and/or purchase materials, equipment or services from the best available source during the time of force majeure, and Contractor shall have no recourse against the state.
D. Force Majeure shall include prison facility lock-downs or similar type of circumstances.
E. Exemption Application and Process from State Contract
Correctional Industries
(REFERENCE WAC 236-49-055)
Complete the following steps to request an exemption from Correctional Industries’ mandatory contract.
Step 1: Does a mandatory CI state contract for a like or similar product exist? Yes ____ No ____
If YES, continue with Step 2. If NO, the exemption form is not necessary, but please forward to CI.
Step 2: Is the product/service manufactured in Washington State (as defined below)? Yes ____ No ____
If YES, continue with Step 3. If NO, exemption request denied. Check with CI for standard or modified product available on contract.
Step 3: a) Does the CI product meet customer’s reasonable requirements (as defined below)?
Yes ____ No ____
b) Is CI product/service of equal quality (as defined below)?
Yes ____ No ____ (If NO, submit product technical specifications with this form).
c) Is CI's price the same or lower than the selected alternate product/service?
Yes ____ No ____
If YES to all criteria in step 3, exemption request denied and you must use the CI contract.
If NO to any one of the criteria in Step 3, complete Step 4 and submit exemption request form to CI for approval.
Step 4: Please complete the following prior to submitting the exemption request form to CI:
|CI Product Information: |Alternative Purchase Information: |
|NOTE: CI’s UNIT PRICE includes FOB Destination. | |
|Item/Service Description: |Item/Service Description: |
|Model #: |Mfg./Model #: |
|Price/Unit: |Price/Unit |
|Quantity: |Quantity |
|Freight Cost: FOB Destination |Freight cost: |
|Total Cost: |Total Cost: |
| |Supplier Name & Address |
| |Contact/Phone: |
If CI does not meet your reasonable requirements, please explain here (if more space is required, attach an additional sheet): ________________________________________________________________________________________________
Note: Please submit technical specifications with your exemption request form (these can be obtained from the alternate source), if exemption form will be evaluated by quality comparison (if answered "no" to Step 3b).
Upon receipt, Correctional Industries will review your request and respond within five (5) business days (unless a shorter or longer time frame has been mutually agreed to), provided the appropriate documents are submitted with exemption
request form. If faxing this form to CI, please call to confirm receipt by CI. If CI doesn’t respond within five (5) business days, you may exercise your alternative purchase, and inform CI by telephone, fax, or mail.
_______________________________________________________________________________________
Submitted by: Agency/Division: _____________________________________________________
Name/Title: _________________________________________________________
Phone No.: _______________________ FAX No.: __________________________
Date: ____________________________ Time: _____________________________
Submit to: Department of Corrections FAX: (360) 753-0219
Correctional Industries Telephone: (360) 725-9136
Attn: John Kirk
PO Box 41115
Olympia, Washington 98504-1115
Approved/Denied By: ___________________________________ _____________
Correctional Industries Date
Customers have the right to appeal exemption denials through the Department of Enterprise Services. Contact the Contract Administrator at (360) 902-7418 and notify CI with a copy of the appeal request. DES will notify CI of the appeal request and consider points of view from both parties before making a final determination. Appeals will be responded to within five (5) business days (unless a shorter or longer time frame has been mutually agreed to).
Definitions:
Exemption - Exemption from CI mandatory contract applies only when a product is manufactured within the State of Washington.
In-State Manufacturer- Products whose major components are assembled or fabricated by using machinery, hand tools or otherwise constructed and whose manufacturing facility is located within the geographical boundaries of the State of Washington, have a State of Washington business address, and have a current Washington State business license.
Reasonable requirements - Requirements determined by the customer to be necessary to their program and end user’s needs. These shall include, but not be limited to, delivery time, standard industry construction materials utilized, disability requirements, fit, function or special requirements.
Equal quality - Having the same/greater strength, capacity, size, power, etc. Meeting functional and performance requirements, as evaluated by Correctional Industries, based on the technical specifications.
Product/Service - A product or product line and services.
Term of Exemption - If approved, the exemption is for the specified product or product line for a one year period. All subsequent customers may receive exemption with proper application and CI’s response.
One Time Exception - In circumstances where CI cannot meet your required delivery timeframe (i.e. end of biennial requirements, etc.) or the contract delivery term, CI may grant a one-time exception, reviewed by CI on a case by case basis. Contact Mike Pracna with CI at 360-586-4046 for a one-time exception.
cc: __________________________, Contract Administrator, Department of Enterprise Services
|Original Contract Agreement Signed By: | |
|Contracts and Legal Service Division: |Department of Corrections/Correctional |
|Sarah Harris |Industries: |
|1500 Jefferson St SW |Tom Beierle Asst. Director/Eastern Operations |
|Olympia, WA 98504 |801 – 88th Avenue SE |
| |Tumwater, WA 98512 |
| | |
|Date: November 29, 2006 |Date: November 30, 2006 |
Contracts and Legal Services
PERFORMANCE REPORT
To Contracts and Legal Services Customers:
Please take a moment to let us know how our services have measured up to your expectations on this contract. Please copy this form locally as needed and forward to the Contracts and Legal Services Procurement Purchasing Manager. For any comments marked unacceptable, please explain in remarks block.
|Procurement services provided: |Excellent |Good |Acceptable |Unacceptable |
|Timeliness of contract actions | | | | |
|Professionalism and courtesy of staff | | | | |
|Services provided met customer needs | | | | |
|Knowledge of procurement rules and regulations | | | | |
|Responsiveness/problem resolution | | | | |
|Timely and effective communications | | | | |
Comments:
Agency: Prepared by:
Title:
Contract No.: Date:
Contract Title: Phone:
Send to:
Washington State Purchasing Agent
Contracts and Legal Services
PO Box 41017
Olympia, Washington 98504-1017
PRODUCT/SERVICE PERFORMANCE REPORT
Complete this form to report problems with suppliers or to report unsatisfactory product or services. You are also encouraged to report superior performance. Agency personnel should contact suppliers in an effort to resolve problems themselves prior to completion and submission of this report.
Contract number and title: 09006; Washington State Ferries Uniforms
Supplier’s name: Correctional Industries
Supplier’s representative:
|PRODUCT/SERVICE: |
| |Contract item quality higher than required | |Damaged goods delivered |
| |Contract item quality lower than required. | |Item delivered does not meet P.O./contract specifications |
| |Other: | | |
|SUPPLIER/CONTRACTOR PERFORMANCE: |
| |Late delivery | |Slow response to problems and problem resolution |
| |Incorrect invoice pricing. | |Superior performance |
| |Other: | | |
|CONTRACT PROVISIONS: |
| |Terms and conditions inadequate | |Additional items or services are required. |
| |Specifications need to be revised | |Minimum order too high. |
| |Other: | | |
Briefly describe situation:
|Agency Name: |Delivery Location: |
|Prepared By: |Phone Number: |Date: |Supervisor: |
| | | | |
Send To:
Sarah Harris
Contracts Specialist
Contracts and Legal Services
PO Box 41017
Olympia, WA 98504-1017
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- 1995 jaguar xj6 problems
- 1995 evaluation and management worksheet
- 1995 power rangers movie cast
- higher learning 1995 full movie
- historical events 1995 to present
- 1995 jaguar xjs for sale
- 1995 jaguar xjs coupe
- 1995 xjs coupe for sale
- 1995 xj6 for sale
- 1995 jaguar coupe
- 1995 jaguar for sale
- 1995 documentation guidelines e m