ARCAT | Free Building Product CAD Details, BIM, Specs and …

 SECTION 26 55 39HELIPAD LIGHTINGDisplay hidden notes to specifier. (Don't know how? Click Here) Copyright 2017 - 2022 ARCAT, Inc. - All rights reserved** NOTE TO SPECIFIER ** FEC Heliports; Helicopter landing platforms and equipment.This section is based on the products of FEC Heliports, which is located at:5228 River Rd.Cincinnati, OH 45233Toll Free Tel: 877-HELIPADTel: 513-621-5260Fax: 513-621-0524Email: request info (tom@)Web: [ Click Here ] for additional information.FEC Heliports is a division of the Federal Equipment Company. FEC was founded in 1982 and began as a small replacement parts supplier for material handling equipment in the US ARMY, US NAVY, US Coast Guard and shipyards throughout the world. Federal Equipment Company quickly grew into a complete engineering and manufacturing company and was recently awarded a 55-million-dollar contract with Huntington Ingalls Industries, formerly Northrop Grumman, to build and install the new FEC designed weapons elevators for the next generation of US Navy aircraft carriers. It was our extensive military experience that paved the way for us to expand into the commercial market in 1996 and open the doors for FEC Heliports.Experience counts when you're landing helicopters. Over the past 20 years, FEC Heliports has designed, manufactured and installed more rooftop and aluminum helipads than anyone else in the world. Unlike most of our competitors, FEC Heliports has an extensive in-house staff consisting of structural engineers, experienced heliport designers and consultants as well as a complete staff of installers and fabricators. We are staffed to handle multiple heliport projects and still give your project the first-class attention it deserves.FEC Heliports' engineering department has spent many years perfecting the HELISLAT (rooftop) design. With over 250 rooftop installations in the US and abroad, FEC Heliports' HELISLAT design has been consistently proven with installations in every climate and under every condition without fail. FEC Heliports has its own 70,000 square foot production facility. Why is this important? This facility allows us to design, build and inspect all our heliport equipment before it arrives at your facility. This includes not only the deck and safety netting, but also the lighting, fire suppression skids and snow-melting skids. We can also design and build our own structural steel for decks and walkways, and our facilities allow us to pre-assemble your helipad to ensure proper fitting once we get to the jobsite. These are just a few of the details that the FEC Heliports team goes through to ensure that your experience with our company is successful. Let us show you why FEC Heliports is the best choice for your project!

GENERAL

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for the project.

Perimeter Lights:

Pole mounted.

Pole mounted, NVG compatible.

Ground based.

Ground based, NVG compatible.

Inset perimeter light assembly.

Inset perimeter inset light assembly, NVG compatible.

Obstruction Lights:

Pole mounted dual red obstruction light.

L-810 ground-based red obstruction light.

L-810 pole mounted obstruction light.

Wind Cones:

Externally lit wind cones.

Internally lit wind cones.

Beacons.

Battery powered lights.

Flood lights.

Remote lighting controller.

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 13 34 16 - Grandstands and Bleachers.

Division 15 - Plumbing: Provisions for and connection to supplied equipment including controls and valves.

Fuel/water separator.

Hydronic snow melting system.

Division 16 - Electrical: Provisions for and connection to supplied equipment.

REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

Canadian Aviation Association (CAA).

Civil Aviation Authority (CAP):

CAP 437 - Standards for offshore helicopter landing areas.

Federal Aviation Association (FAA):

FAA AC 150/5390-2A - Heliport Design.

FAA AC 150/5390-2C - Heliport Design.

Federal Communications Commission (FCC).

Ingress Protection ratings defined in EN 60529 (IP).

International Civil Aviation Organization (ICAO):

ICAO Annex 14 - Aerodromes - Volume II Heliports.

International Standards (EN):

EN 60529 - Degrees of protection provided by enclosures.

International Organization for Standardization (ISO):

ISO 9000 - Quality Management Systems.

Intertek Group PLC, Independent Product Testing (ETL).

National Fire Protection Association:

NFPA 418: Standard for Heliports.

Restriction of Hazardous Substances Directive (RoHS).

Robust Header Compression, Data Compression Standardization (ROHC).

Underwriters Laboratories (UL):

UL 1598 - Luminaires.

UL 94 - Federal Communications Commission.

Underwriters Laboratories Canada (cUL).

Unites States Military specifications (MIL):

MIL-I-45208A - Inspection System Requirements.

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data: Manufacturer's data sheets on each product to be used, including:

Preparation instructions and recommendations.

Storage and handling requirements and recommendations.

Installation methods.

Shop Drawings:

Submit complete fabrication details, design calculations, and erection Drawings, bearing the registered structural engineer's stamp, to the Local Building Code Official.

Certification/Permits:

Manufacturer is responsible for FAA submittal process and will submit evidence of Airspace Certification from the FAA.

QUALITY ASSURANCE

Manufacturer Qualifications:

Manufacturer shall have an approved and documented quality control system equal to Mil-I-45208A or ISO 9000.

Installer Qualifications: Contractor shall be financially responsible for obtaining any permits as they apply to the system installation and operation.

DELIVERY, STORAGE, AND HANDLING

Store products in manufacturer's unopened packaging, out of extreme heat or direct sunlight, until ready for installation. Do not switch fixtures ON until protective peel is removed from reflectors and/or lenses.

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

WARRANTY

Warranty Period: Manufacturer warrants our manufactured products and installed systems for 12 months.

Product Warranty: Manufacturer will repair or replace any parts that Manufacturer determines are defective during the warranty period.

System Warranty: Manufacturer will repair or replace any parts or components of the system that Manufacturer determines are defective during the warranty period.

Customer's Obligations: The Customer shall notify Manufacturer of any defects or problems with a part or system within 30 days of the date that the defects or problems were discovered or should have been discovered; failure to notify Manufacturer within this 30-day period shall nullify the warranty regarding that defect or problem.

Maintenance: The Customer is responsible for preventive and routine maintenance.

Extension of Warranty: The warranty period shall not be extended.

Discrete Warranty Claim: When the system returns to normal operation for a 30-day period following action by Manufacturer and the Customer under this warranty, the defect or problem shall be considered resolved.

Other Warranty Provisions: Customer may not assign this Warranty to any other person or business entity, including a successor in interest to the Customer, without Manufacturer's written consent.

PRODUCTS

MANUFACTURERS

Acceptable Manufacturer: FEC Heliports, which is located at: 5228 River Rd.; Cincinnati, OH 45233; Toll Free Tel: 877-HELIPAD; Tel: 513-621-5260; Fax: 513-621-0524; Email: request info (tom@); Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Delete article if not required.

PERIMETER LIGHTS

** NOTE TO SPECIFIER ** Delete paragraphs not required.

Pole Mounted Perimeter Lights:

Standards Compliance:

CAP 437.

ICAO Annex 14.

FAA and CAA.

UL1598.

ETL.

Powder coated high-visibility yellow cast aluminum body. High tempered glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Operating LED Lifespan: Greater than 50,000 hours.

Light Source:

Omni-directional LED Lamp 3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Standard Colors:

True green (528 nm).

Blue (470 nm).

White 6000 K.

Yellow/amber (590 nm).

Physical Characteristics:

Degree of Protection: IP66.

Height: 5-3/4 in (146 mm).

Outside Diameter: 3-7/8 in (98 mm).

Materials:

Lens: Tempered Glass.

Casting: 356 T6 Aluminum Alloy.

Powder Coat: SW NL YELLOW PYS8-C8289.

Shipping Weight: 3 lbs (1.4 kg).

Pole Mounted Perimeter Lights, NVG Compatible:

Standards Compliance:

CAP 437.

ICAO Annex 14.

FAA and CAA.

UL1598.

ETL.

Powder coated high-visibility yellow cast aluminum body. High tempered glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Operating LED Lifespan: Greater than 50,000 hours.

Light Source:

Omni-directional LED Lamp 3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and UL 94 V-0 compliant.

Standard Colors:

True Green (528 nm).

Blue (470 nm).

White 6000 K.

Yellow/amber (590 nm).

NVG Compatible:

Three true green LEDs and two IR LEDs (IR LEDs 850nm).

** NOTE TO SPECIFIER ** NVG compatible lights will come with a clear lens. This allows IR LEDs to pass through the glass unobstructed. 5.5W power consumption (at 350mA).

Clear lens provided with IR LED lights.

NVG Characteristics:

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amps at 277 V.

Physical Characteristics:

Degree of Protection: IP66.

Height: 5-3/4 in (146 mm).

Outside Diameter: 3-7/8 in (98 mm).

Materials:

Lens: Tempered Glass.

Casting: 356 T6 Aluminum Alloy.

Powder Coat: SW NL YELLOW PYS8-C8289.

Shipping Weight: 3 lbs (1.4 kg).

Ground-Based Perimeter Light, NVG Compatible.

Standards Compliance:

CAP 437.

ICAO Annex 14.

FAA and CAA.

UL1598.

ETL.

Powder coated high-visibility yellow cast aluminum body. High tempered glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Operating LED Lifespan: Greater than 50,000 hours.

Light Source:

Omni-directional LED Lamp 3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Standard Colors:

True Green (528 nm).

Blue (470 nm).

White 6000 K.

Yellow/amber (590 nm).

NVG Compatible:

Three true green LEDs and two IR LEDs (IR LEDs 850 nm).

** NOTE TO SPECIFIER ** NVG compatible lights will come with a clear lens. This allows IR LEDs to pass through the glass unobstructed. 5.5W power consumption (at 350mA).

Clear lens provided with IR LED lights.

NVG Characteristics:

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amps at 277 V.

Physical Characteristics:

Degree of Protection: IP66.

Height 4-1/16 in (104 mm).

Outside Diameter 3-7/8 in (98 mm).

Materials:

Lens: Tempered Glass.

Casting: 356 T6 Aluminum Alloy.

Powder Coat: SW NL YELLOW PYS8-C8289.

Shipping Weight: 3 lbs (1.4 kg).

Inset Perimeter Light Assembly:

Standards Compliance:

CAP 437.

ICAO Annex 14.

FAA and CAA.

UL1598.

ETL.

Powder coated high-visibility yellow cast aluminum body. High tempered glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Operating LED Lifespan: Greater than 50,000 hours.

Light Source:

Omni-directional LED Lamp 3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Standard Colors:

True Green (528 nm).

Blue (470 nm).

White 6000 K.

Yellow/amber (590 nm).

Physical Characteristics:

Degree of Protection: IP66.

Height: 5 in (127 mm).

Outside Diameter: 10 in (254 mm).

Inside Diameter: 4 in (102 mm).

Materials:

Lens: Tempered glass.

Casting: 356 T6 aluminum alloy.

Powder Coat: SW NL YELLOW PYS8-C8289.

Shipping Weight: 4 lbs (1.8 kg).

Mounting Can:

Height: 6-5/8 in (168 mm).

Outside Diameter: 11 in (279 mm).

Inside Diameter: 8-1/2 in (216 mm).

Casting: 356 T6 aluminum alloy

Shipping Weight: 6 lbs (2.7 kg).

Inset Perimeter Light Assembly, NVG Compatible:

Standards Compliance:

CAP 437.

ICAO Annex 14.

FAA and CAA.

UL1598.

ETL.

Powder coated high-visibility yellow cast aluminum body. High tempered glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Operating LED Lifespan: Greater than 50,000 hours.

Light Source:

Omni-directional LED Lamp 3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Standard Colors:

True Green (528 nm).

Blue (470 nm).

White 6000 K.

Yellow/amber (590 nm).

NVG Compatible:

Three true green LEDs and two IR LEDs (IR LEDs 850nm).

** NOTE TO SPECIFIER ** NVG compatible lights will come with a clear lens. This allows IR LEDs to pass through the glass unobstructed. 5.5W power consumption (at 350mA).

Clear lens provided with IR LED lights.

NVG Characteristics:

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amps at 277 V.

Physical Characteristics:

Degree of Protection: IP66.

Height: 5 in (127 mm).

Outside Diameter: 10 in (254 mm).

Inside Diameter: 4 in (102 mm).

Materials:

Lens: Tempered glass.

Casting: 356 T6 aluminum alloy.

Powder Coat: SW NL YELLOW PYS8-C8289.

Shipping Weight: 4 lbs (1.8 kg).

Mounting Can:

Height: 6-5/8 in (168 mm).

Outside Diameter: 11 in (279 mm).

Inside Diameter: 8-1/2 in (216 mm).

Casting: 356 T6 aluminum alloy

Shipping Weight: 6 lbs (2.7 kg).

** NOTE TO SPECIFIER ** Delete article if not required.

OBSTRUCTION LIGHTS

** NOTE TO SPECIFIER ** Delete paragraphs not required.

Pole Mounted Dual Red Obstruction Light:

Standards/Certification:

CAP 437.

ICAO Annex 14.

FAA & CAA.

UL1598.

Powder coated high-visibility yellow cast aluminum body. Low profile glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Life Span: Greater than 50,000 hours.

Physical characteristics:

1 in NPT (25 DN) hub for pole mounting.

Shipping weight: 30 lbs (13.6 kg).

Degree of Protection: IP66.

L-810 Ground-Based Red Obstruction Light:

Standards/Certification:

CAP 437.

ICAO Annex 14.

FAA & CAA.

UL1598.

ETL.

Powder coated high-visibility yellow cast aluminum body. Low profile glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Life Span: Greater than 50,000 hours.

Light Source:

Omni-directional LED Lamp 3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Standard Color: Red (632 nm).

Physical Characteristics:

Height: 4-1/16 in (103 mm).

Height: 7-1/16 in (179 mm).

Outside Diameter: 3 7/8 (98 mm).

Bolt Circle for Mounting: 5-1/2 in (139.7 mm).

Materials:

Lens: Tempered glass.

Casting: 356 T6 aluminum alloy.

Powder Coat: SW NL YELLOW PYS8-C8289.

Degree of protection: IP66.

Shipping weight: 4lbs.

L-810 Pole Mounted Red Obstruction Light:

Standards/Certification:

CAP 437.

ICAO Annex 14.

FAA & CAA.

UL1598.

ETL.

Powder coated high-visibility yellow cast aluminum body. Low profile glass lens Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60 Hz.

Maximum Power: 6 watts, .2 amps at 120 V.

Consumption: 6 watts, .1 amp at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Life Span: Greater than 50,000 hours.

Light Source:

Omni-directional LED Lamp 3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Standard Color:

Red LEDs (632 nm).

Red with IR LEDs (632nm) for NVG compatibility.

Physical Characteristics:

Height: 5-3/4 inches tall (146 mm).

Hub for Pole Mounting: 1 in NPT (25 DN).

Outside Diameter: 3 7/8 (98 mm).

Bolt Circle for Mounting: 5-1/2 in (139.7 mm).

Materials:

Lens: Tempered glass.

Casting: 356 T6 aluminum alloy.

Powder Coat: SW NL YELLOW PYS8-C8289.

Degree of protection IP66.

Shipping weight: 4lbs.

** NOTE TO SPECIFIER ** Delete article if not required.

WIND CONES

** NOTE TO SPECIFIER ** Delete paragraph not required.

Externally Lit Wind Cones:

Powder coated high visibility international orange housings. High tempered glass lens. Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60Hz.

Maximum Power Consumption:

78 watts, 0.65 amps at 120 V.

78 watts, 0.28 amps at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Life Span: Greater than 50,000 hours.

Light Source:

Floodlights: Four LED par 38 spotlight, COB, 18 W, clear lens.

Obstruction Light:

One omni-directional LED lamp.

3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Physical Characteristics:

** NOTES TO SPECIFIER ** Custom heights available. Delete height not required.

Height: 10 ft (3.05 m) from base to top.

Height (ft / m): _____.

Base: Four 3/4 in (19 mm) holes on a 7 (178 mm) bolt circle.

Shipping weight: 50 lbs (22.7 kg).

** NOTE TO SPECIFIER ** Delete wind sock not required.

Windsock: 18 by 6 in (457 by 152 mm).

Windsock: 18 by 8 in (457 by 203 mm).

Internally Lit Wind Cones

Powder coated high visibility international orange housings. High tempered glass lens. Pre-wired for installation.

Electrical Characteristics:

Operating Voltage: 120 to 277 V, 50/60Hz.

Maximum Power Consumption:

42 watts, .65 amps at 120 V.

42 watts, .28 amps at 277 V.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Life Span: Greater than 50,000 hours.

Light Source:

Floodlights: Two LED par 38 spotlight, COB, 18 W, clear lens.

Obstruction Light:

One omni-directional LED lamp.

3x Osram OSLONTM SSL 150O LEDs.

Average Power Consumption: 3.5 W.

Constant Current Supply: 350 mA.

Aluminum Circuit Diameter: 2 in (50 mm).

RoHS and 94VO compliant.

Physical Characteristics:

** NOTES TO SPECIFIER ** Custom heights available. Delete height not required.

Height: 10 ft (3.05 m) from base to top.

Height (ft / m): _____.

Base: Four 3/4 in (19 mm) holes on a 7 (178 mm) bolt circle.

Shipping weight: 50 lbs (22.7 kg).

** NOTE TO SPECIFIER ** Delete wind sock not required.

Windsock: 18 by 6 in (457 by 152 mm).

Windsock: 18 by 8 in (457 by 203 mm).

** NOTE TO SPECIFIER ** Delete article if not required.

BEACONS

LED Programmable Locating Beacon:

Powder coated high-visibility yellow cast aluminum body suitable. Single or three color options. No moving parts. Pre-wired for installations. Excellent long range visibility. Programmable flash rate.

Standards Compliance:

CAP 437.

FAA.

ICAO.

Electrical Characteristics:

Operating Voltage: 100 to 230 V, 50/60 Hz.

Absolute Voltage Range: 40 to 55 VDC.

Average Power Consumption: Less than 20 watts.

Electrical Protection: On-board 4 A fuse (spare fuse on board) and polarity protection.

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

Life Span: Greater than 50,000 plus hours.

Relay contact output for alarm monitoring.

Standard LED Color Characteristics:

White: 6000 to 6500 degrees K ' Cool White.'

Green: 528 nm.

Yellow: 590 nm.

Optional LED Color Characteristics:

Red 625 nm.

Red-Orange 617 nm.

Hyper Red 656 nm.

Deep Blue 455 nm.

Physical Characteristics:

Height: 7-1/16 inches (178 mm).

Hub for Pole Mounting: 1 in NPT (25 DN).

Locating pin in base to enable precise orientation for quadrant management.

Operating temperature: Minus 13 to 122 degrees F (Minus 25 to 50 degrees C).

Storage temperature: Minus 13 to 176 degrees F (Minus 25 to 80 degrees C).

Long-life, quiet, low-power Internal cooling fan.

Shipping Weight: 18 lbs (8.1 kg).

Housing: Cast aluminum.

Powder Coat: SW NL YELLOW PYS8-C8289.

Degree of Protection: IP66.

Level Setting Switches:

Brightness Settings: 4 levels.

Level One: 100 percent (Factory set default).

Level Two: 60 percent.

Level Three: 30 percent.

Level Four: 10 percent

Operation Modes:

FAA L-802H Civil Helipad Beacon: 36 flashes per minute (FPM), 75ms pulse width.

US Army Helipad Pattern (as per TM 5-811-5): 36 FPM, 50ms pulses white (double Peak) - green - yellow.

FAA L-802M Military Helipad Beacon: 17.3 FPM, 100ms pulse width.

Location Beacon Modes:

Modified ICAO pattern: 30 FPM (short 2 ms and long 25 ms pulse)

UK CAA and Transport Canada Timing Compliant: 25 FPM

Morse Beacon Modes: 4 and 6 WPM (Words Per Minute): 1, 2 and 3 character code options.

Rotating (simulated) and flashing beacon modes.

Provision for an additional 8 custom patterns.

** NOTE TO SPECIFIER ** Delete article if not required.

BATTERY POWERED LIGHTS

HEMS-Star (Set of 8 Helipad Battery Lights):

Standards Compliance:

FCC certification for operation in the US, and CE certification for the European Union.

Portable Battery Powered LED Helipad Lighting System: Microprocessor controlled light system designed for rapid deployment in temporary and emergency situations to provide safe and effective marking on a variety of terrains.

Operational Capabilities:

NVG Compatible: Red, blue, green, white visible LED's and infra-red. Programmable to show steady-on, flash warning, location beacon or morse code with the option of automatic sunset switching.

UHF Transceiver: Each light or set of lights can be programmed, interrogated and controlled by wireless commands.

System Control: Remote lighting controller, personal computer, or tablet with Zulu "dongle" transceiver and USB connector provided with each case as standard. Set up, test and control groups of lights via UHF transceiver.

Weight: Less than 2.2 lbs (1 kg). A full case of eight lights weighs 23.4 lbs (10.6 kg).

Rechargeable: In case via mains at 100 to 240 VAC or 13.5 to 28 VDC input from vehicles, solar, or wind power.

Degree of Protection: IP65.

Base: Stainless steel, successfully tested at the Sikorsky Development Flight Centre for stability under the full rotor wash of a CH-147 (Chinook).

Run Time Steady: 18 hours.

Run Time Flashing: 108 hours.

Recharging Time: 3.5 hours fully exhausted to fully charged.

** NOTE TO SPECIFIER ** Delete article if not required.

FLOOD LIGHTS

** NOTE TO SPECIFIER ** Delete paragraph not required.

LED Hooded Deck Floodlight:

Standards Compliance: UL and cUL listed. RoHS compliant and waterproof.

Powder coated high visibility yellow cast aluminum housing. Pre-wired for installation.

Operating voltage: 120 to 277 V, 50/60 Hz.

Power: 36 watts, 0.3 amps at 120 V maximum.

Consumption: 36 watts, 0.13 amps at 277 V.

Operating Temperature: 14 to 113 degrees F (minus 10 to 45 degrees C).

Operating LED Lifespan: Greater than 40,000 hours.

Powder Coat: SW NL YELLOW PYS8-C8289.

Light Source:

Two LED PAR 38 Clear Spotlight.

Lumens: 1300 to 1500 per bulb.

Degree of Protection: IP 65 (indoor and outdoor use).

LED Mini-Floodlights (Walkway Lighting):

Powered coated white cast aluminum housing with Finned heat sink. Clear micro-prismatic tempered glass lens. White cast metal visor. Pre-wired for installation.

Head Position: Adjustable.

Reflector: Molded textured plastic with semi-diffuse finish.

One circuit board with 30 LEDs.

Lifespan: Greater than 100,000 hours.

Electrical Characteristics:

Operating Voltage 120 V at 0.10 A.

Power: 12 watts.

Lumens: 957.

Physical Characteristics:

Height: 4 1/2" (114 mm).

Depth: 4 3/4" (121 mm).

Attachment Hardware: 1/2 in threaded stud (12.7 mm).

** NOTE TO SPECIFIER ** Delete article if not required.

REMOTE LIGHTING CONTROLLERS

FEC Remote Lighting Controller:

Standards Compliance: ROHC Compliant

Features:

Simple frequency setting through front panel.

Number of Presses to Activate Circuits: 1, 2 or 3.

Remotely Activate Circuits: 1, 2 or 3 and have the status sent straight back to your mobile.

Programmable timeout with optional flashes to indicate end of on period.

VHF operation can be remotely enabled and disabled for extra security.

Secure PIN code protected SMS commands.

Secure SMS status reporting.

Local and remote test and diagnostics integrated into the unit

Controller Mode Options:

** NOTE TO SPECIFIER ** Delete control mode not required or keep both.

VHF and PCL

VHF Frequency Range: 118 to 136 MHz.

Channel Spacing (current): 25 kHz.

Channel Spacing (future): 8.33 kHz.

Frequency Selection: Any channel or UNICOM.

VHF Aerial: External remote mounted.

GSM/SMS or both.

GSM Bands: Tri-Band.

GSM Aerial Options: Internal to unit or remote mounted.

Network: Operators choice subject to coverage.

Tariff: Account or pre-pay.

Degree of Protection: IP65.

LCD and Keypad Protection: IP65 and ' vandal resistant.'

Operating Temperature: Minus 13 to 122 degrees F (minus 25 to 50 degrees C).

System Storage Temperature: Minus 13 to 176 degrees F (minus 25 to 80 degrees C).

Voltage:

Operating (AC): 100 to 240 VAC 50/60 Hz.

Operating (DC): 12 VDC.

Range (DC): 10V to 15 VDC.

Power:

Standby: 2 watts (approximate).

Transmitting: 10 watts (maximum).

Consumption: 30 watts (including optional winter heater) maximum.

Relay Capacity: 2 off, 20 A Relays (1 NO, 1 NC) DIN rail mounting option of third relay.

Dimensions (H x D x W): 11 x 6.5 x 7 in (280 x 165 x 180 mm).

Weight: 5.5 lbs (2.5kg).

EXECUTION

EXAMINATION

Do not begin installation until substrates have been properly prepared. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

PREPARATION

Clean surfaces thoroughly prior to installation. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

INSTALLATION

Install in accordance with manufacturer's latest published requirements, instructions, specifications, details and approved Shop Drawings.

Install fixtures in proper relationship with helipad and adjacent components.

Install fixtures with clearances recommended by manufacturer.

Install lamps and test for proper operation.

Manufacturer shall provide full-time installation crew to coordinate installation. Contractor shall certify in writing at completion that system is installed in accordance with manufacturer's recommendations.

Manufacturer shall coordinate requirements for on-site support required for installation of items supplied, and is responsible for supplying and delivering to the site components required for complete and usable installation whether or not shown or specified by these documents.

PROTECTION

Protect installed products until completion of project. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download