Hawaii State Procurement Office



DETAILED SPECIFICATIONS

Vehicle Minimum Specifications:

Furnishing to the State of Hawaii, Department of Land and Natural Resources, Division of Conservation and Resources Enforcement, One (1) 2018, or latest Production Model, Hybrid Sport Utility Vehicle, Gasoline and Battery Powered, All-Wheel Drive, Toyota Highlander Hybrid LE or similar, delivered FOB to the State of Hawaii, DLNR, Division of Conservation & Resources Enforcement, drop shipped as specified.

1. Year of Manufacture: 2018 or newer

2. Model: Toyota Highlander Hybrid LE or similar.

3. Type: Hybrid Sport Utility Vehicle.

4. GVW rating: 6000.00 lbs.

5. Wheel base: 109.8 inches

6. Engine: 3.5 liters, V-6, Double Overhead CAM, 24 valve direct-injection Atkinson-cycle-capable engine with variable valve timing-intelligent wide intake and variable valve timing with intelligence exhaust, EV, ECO and POWER modes, 306 hybrid system net hp (228 kW).

7. Electric Motors (Two front and rear): Permanent magnet synchronous motors drive front and rear wheels.

8. Transmission: Electronically controlled Continuously Variable Transmission with sequential shift mode.

9. Drivetrain: Electronic On-Demand All Wheel Drive System with Intelligence

10. Traction Battery: Sealed Nickel Metal Hydride (Ni-MH)

11. Body Construction: Reinforced unibody

12. Body/Cab: 4 door, rear hatch. (Overall Length/Width: 192.5/75.8)

Power windows / Locks

Power mirrors

Rear vision camera

Factory installed air conditioning

Factory installed sound system

Heater/defroster

Protective rubber floor mats

13. Bumpers: Chrome or painted bumpers front/rear

14. Steering: Electric power steering (EPS), power assisted rack and pinion

15. Brakes: Power-assisted ventilated 12.9 inch front disc brakes, solid 12.2 inch rear disc brakes with electronically controlled braking system, integrated regenerative braking and Star Safety System

16. Tires /Wheels: All Season steel belted radials.

Spare Tire: Temporary Spare Tire is required

17. Suspension: Front – Independent strut front suspension, double wishbone style multi-link rear suspension with front and rear stabilizer bars

18. Color: White or light color

19. Seats cloth: Fabric-trimmed front and second row seats, 6-way adjustable driver’s seat, 4-way adjustable front passenger seat, 60/40 split, sliding and reclining fold flat second-row seats.

EMERGENCY LIGHTING AND EQUIPMENT REQUIREMENTS:

General:

All Police Emergency equipment must be installed by Certified Emergency Vehicle technicians who have been factory trained by the specified manufacturer. Contractor will consult with project manager as to final placement of items and programming of system. The contractor shall furnish and install the specified equipment. All labor, shop supplies, and equipment shall be provided for a fully functional system on each vehicle at time of delivery.

Scope of work:

The installing subcontractor shall provide initial installation / programming of equipment. Post installation local warranty service on the aftermarket emergency lighting and siren equipment specified during the manufacturers printed warranty period for equipment installed. All LED modules shall have a 5 year printed warranty.

The following items must be installed and provided:

Whelen CenCom Carbide CCSRN4A w/ CANCTL6 control head shall be provided and installed. Whelen SA315P w/ Compatible SAK Series mounting bracket for vehicle being provided. Contractor shall consult with officer in charge before installation to discuss functions and programming. All functions shall be inspected and verified before vehicle acceptance. Contractor shall provide after delivery programming support for future upgrades and/or changes at no charge to the State for as long as the vehicle remains in service.

Whelen Front Inner Edge FST WeCan ISFW series (12) Lamp DUO RED/WHT driver's side, DUO BLU/WHT pass side, full WHT flood capable. Contractor shall provide custom fabricated brackets if direct fit is not available for vehicle being offered. Fabricated brackets shall mount lighting fixture as close to the glass as possible to minimize flashback. Two (2) end lamps on each side shall be capable of low level steady burn CRUISE function.

Whelen Rear Inner Edge RST WeCan ITRAYW12 series (12) Lamp. Eight (8) lamps shall be DUO lamps - (4) BLU/AMB and (4) RED/AMB. Amber lights shall be capable of performing traffic advisor functions - left/right/split/warning. Remaining four (4) shall consist of SOLO lamps - (2) ISSR and (2) ISSB. Two (2) end lamps shall be capable of low level steady burn CRUISE Function.

Whelen I2D & I2E lightheads, (1) each DUO RED/WHT & BLU/WHT shall be installed in the front grille, custom brackets as needed to place lightheads for maximum performance. Whelen WIONR & WIONB, (1) each, installed behind rear quarter hatch glass for side coverage Custom brackets shall be made as needed to place lightheads for maximum performance. Whelen WIONR & WIONB, (1) each shall be installed rear facing, lower inside tailgate glass for lower mid level coverage, custom brackets as needed to place lighthead for maximum performance. Whelen WIONR & WIONB, (1) each, installed on lower trunk lid w/ IONGROM options for flush mounting rear facing, for rear coverage when trunk lid is open. OEM trunk pin shall be interfaced to signal on/off functions to CARBIDE system. Whelen VTX609C shall be installed behind a clear lens within the rear taillights. (2) total.

Whelen 3SRCCDCR interior lightheads, (2) shall be installed in the inside of the rear tailgate - to be used as work lights when the tailgate is opened. Contractor shall install a double throw rocker, on-off-on, for the ability to switch from red to white illumination.

Contractor shall furnish and install a Havis C-2400 equipment console, custom mounted and fitted to house integral OEM components. Shall include equipment mounting brackets for Whelen siren and DLNR radio control head, C-CUP2 internal cupholder, Kussmaul USB charger and (2) C-LP2 lighters. (2) Magnetic Mic holders. Filler plates to cover the remaining space.

Contractor to furnish and Install Havis C-HDM telescopic mount with HDM floor bracket for vehicle being offered. Shall include C-MD-102 motion device and UT-1001 mounting plate, LPS power supply for Agency designated computer, wired to a CG-X timer.

Contractor shall furnish and install Sti-Co Industries GLMT-DB-VHF/7-800 glass mount antenna and install DLNR provided Harris Unity mobile radio - per officer in charge instructions. Contractor shall provide programming per DOCARE instructions at no charge.

Due to the technical complexity of the required installation, the officer in charge reserves the right to request docement(s)/certification(s) to display the contractor's competency in automotive/low voltage electronics/two-way radio communications. Due to the required programming for the Whelen Carbide system, officer in charge reserves the right to request up to (3) previous Whelen CanTrol/Carbide project departments to inquire about contractor's performance.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download