Updated: 4/5/2002
[pic]
Updated: 13/5/2009
File name: CVprofesor
CURRICULUM VITAE
ASSOC. PROF. DR. DZULKIFLI BIN AWANG
DEPARTMENT OF DESIGN
FACULTY OF MECHANICAL ENGINEERING (FME)
UNIVERSITY TECHNOLOGY MALAYSIA
TEL: 07- 5504583 (direct line)
FAX: 07- 5566159
E/MAIL:dzul@fkm.utm.my
CONTENTS PAGE
1. Personal Data 2
2. Education and Degrees 2
3. Employment Experiences 2
4. Members of Professional Societies 3
5. Managerial Post/ Additional Responsibilities 4
6. Committees 7
7. Teaching Responsibilities 12
8. Supervision of Thesis 16
9. Supervision of Students Activities 27
10. Assessment Role 28
11. Seminar and Courses Attended 32
12. Project and Research 44
13. Consultancy 47
14. Publications 48
15. Extra-curricular Activities 51
16. Honours and Awards 62
1. PERSONAL DATA
Name: Associate Prof. Dr. Dzulkilfi bin Awang
I/C Number: 570504-08-6675
Nationality: Malaysian
Date of Birth: 4th May 1957
Place of Birth: Kuala Kurau, Perak
Marital Status: Married
House Address: 29, Jln. Belibis 1. Tmn. Perling, 81200 Johor Bahru, JOHOR
2. EDUCATION AND DEGREES
Higher School Certificate (HSC - full Cert.), Kind Edward VII Secondary School, Taiping, Perak (1978)
Bachelor of Design in Art & Design (Industrial Design) MARA Institute of Technology (1983) Dissertation: Design & Safety of Children’s Toys
Master of Arts (with Distinction) in Industrial Design (Engineering), Manchester Polytechnic, Manchester, United Kingdom (1985) Thesis: A Mechanized Sprayer for Tobacco Cultivation in Malaysia
Doctor of Philosophy in Industrial Design, The Manchester Metropolitan University, Manchester, United Kingdom (1995) Thesis: The Potential Contribution of Industrial Design to the Adaptation of Agricultural Machinery for use in Malaysia
3. EMPLOYMENT EXPERIENCES
Post: Temporary Teacher (academic)
Employer: Sekolah Menengah Agama Al-Falah, Parit Tok Ngah, Tanjung Piandang,
Perak.
Date: June 1978 – June 1979
Post: Design Trainee
Employer: Matshusita Electric Company, Shah Alam, Selangor
Date: May- July 1982
Post: Assistant Lecturer
Employer: University Technology Malaysia
Date: August 1983 – September 1985
Post: Part Time Lecturer
Employer: MARA Institute of Technology, Shah Alam
Date: July 1987 –June 1989
Post: Lecturer
Employer: University Technology Malaysia
Date: October 1985 – April 1995
Post: Senior Lecturer
Employer: University Technology Malaysia
Date: May 1995 – March 1999
Post: Associate Professor
Employer: University Technology Malaysia
Date: April 1999 – Present
Post: Head of Design Department
Employer: Faculty of Mechanical Engineering, UTM
Date: January 2001-March 2007
Post: Head of Industrial Design Panel
Employer: Faculty of Mechanical Engineering, UTM
Date: March 2007- Present
4. MEMBERS OF PROFESSIONAL SOCIETIES
Member – Malaysian Invention and Design Society (MINDS)
Member – South East Asean Ergonomics Society (SEAES)
Member – Society of Industrial Art & Design (SIAD), United Kingdom
5. MANAGERIAL POST/ADDITIONAL RESPONSIBILITIES
5.1 Managerial
a) Post : Head of Design Panel
Date : July 1987 – Jun 1988
b) Post : Co-ordinator for industrial Design (SJJ 3512) subject
Date : July 1990 May 1991
c) Post : Co-ordinator for Product Design (SMM 5523) Subject
Date : July 1996 – May 1997
d) Post : Co-ordinator for Industrial Design Subject (SMJ 2513) subject
Date : July 1996 – May 2001
e) Post : Committee for the establishment of New Course – Bachelor of Science
Industrial Design
Date : May 1995 – April 1997
f) Post : Committee for the establishment of New Course – Automotive
Engineering
Date : July 1996 – May 1997
g) Post : Co-ordinator for Bachelor of Science - Industrial Design Course.
Date : May 1997 – Present
h) Post : Co-ordinator for Industrial Design subjects (SMJ 2513)
Date : May 1998 – Present
i) Post : Project Leader – Design and Fabrication of a Super-kart F1 Group
Date : August 1996 – August 1998
j) Post : Project Leader - Design and Fabrication of a Mobile Field Kitchen
Date : March 1998 – March 1999
k) Post : Project Leader – Design and Fabrication of a Catamaran Sailing Boat
Date : March 1998 – March 1998
l) Post : Head of Industrial Design Area/Specialisation
Date : Jan 1999 – Jan 2001
m)Post : Acting Head of Department, Dept. of Design, FME
Date : 6th – 7th May 1999
n) Post : Acting Head of Department, Dept. of Design, FME
Date : 16th – 18th June 1999
o) Post : Acting Head of Department, Dept. of Design, FME
Date : 23rd – 28th August 1999
p) Post : Acting Head of Department, Dept. of Design, FME
Date : 22nd May – 10th June 2000
q) Post : Acting Head of Department, Dept. of Design, FME
Date : 6th - 10th November 2000
r) Post : Acting Head of Department, Dept. of Design, FME
Date : 28th - 29th November 2000
s) Post : Head of Department, Dept. of Design, FME
Date : 1st January 2001 - 31 March 2007
t) Post : Head of Industrial Design Panel
Date : 1 April 2007 - Present
5.2 Advisor of Studies
a) Post : Advisor of Studies 1st Year Diploma of Mechanical Engineering
Date : 1983 – 1984
b) Post : Advisor of Studies 1st Year Diploma of mechanical Engineering
Date : 1986 – 1987
c) Post : Advisor of Studies 2nd Year Diploma of Mechanical Engineering
Date : 1987 – 1988
d) Post : Advisor of Studies 3rd Year Diploma of Mechanical Engineering
Date : 1986 – 1987
e) Post : Advisor of Studies 1st Degree of Mechanical Engineering
Date : 1987 – 1988
f) Post : Advisor of Studies 2nd Year Degree of Mechanical Engineering
Date : 1988 - 1989
g) Post : Advisor of Studies 3rd Year Degree of Mechanical Engineering
Date : 1989 – 1990
h) Post : Advisor of Studies 4th Year Degree of Mechanical Engineering
Date : 1990 – 1991
i) Post : Advisor of Studies 2nd Year Degree of Mechanical Engineering
Date : 1995 - 1996
j) Post : Advisor of Studies 3rd Year Degree of Mechanical Engineering
Date : 1997 - 1998
k) Post : Advisor of Studies 4th Year Degree of Mechanical Engineering
Date : 1998 – 1999
l) Post : Advisor of Studies 5th Year Degree of Mechanical Engineering
Date : 1999 – Present
m) Post : Advisor of Studies 1st year Degree of Bachelor of Science
Industrial Design
Date : 1999/2000
o) Post : Advisor of Studies 2nd year Degree of Bachelor of Science Industrial
Design
Date : 2000/2001
p) Post : Advisor of Studies 3rd year Degree of Bachelor of Science Industrial
Design
Date : 2001/2002
q) Post : Advisor of Studies 4th year Degree of Bachelor of Science Industrial
Design
Date : 2002/2003/2004/2005
r) Post : Advisor of Studies 1st year Degree of Bachelor of Science
Industrial Design
Date : 2005/2006
s) Post : Advisor of Studies 2nd year Degree of Bachelor of Science
Industrial Design
Date : 2006/2007
t) Post : Advisor of Studies 3rd year Degree of Bachelor of Science
Industrial Design
Date : 2007/2008
u) Post : Advisor of Studies 4th year Degree of Bachelor of Science
Industrial Design
Date : 2008/2009
Advisory Outside UTM
a) Post : Design Project Advisor 3rd Year Diploma in Art & Design (Industrial
Design)
Date : (1987 – 1989)
b) Post : Program Advisor for Diploma Industrial Design - Kolej Agama Sultan
Zainal Abidin (KUSZA), Kuala Terengganu, Terengganu.
Date : 1999 - Present
c) Post : Program Advisor for Bachelor of Arts Industrial Design – Universiti
Darul Iman, Kuala Terengganu, Terengganu.
Date : 2004 - Present
d) Post : Program Advisor for Diploma Industrial Design – Southern College,
Johor Bahru, Johor
Date : 2006 – Present
e) Post : Program Advisor for Bachelor of Engineering Technology (Industrial
Design) – University of Kuala Lumpur (UniKL),
Date : 2007 - Present
6. COMMITTEES
1) Committee : Chairman, Faculty of Mechanical Engineering Manual, UTM
Date : 1987 – 1991
2) Committee : Thesis Panel, FME, UTM
Date : 1989 – 1991
3) Committee : FME/UTM Open Day
Date : 1987 – 1991
4) Committee : Out-campus Course SPACE – Co-ordinator for Industrial Design
Subject, UTM
Date : 1995 – Present
5) Committee : FME, UTM Family Day
Date : 1995
6) Committee : Co-ordinator, Rakan Rekacipta Workshop in conjunction with the
Launching of Rakan Muda/Rakan Rekacipta Johor State Level at UTM.
Date : 1996
7) Committee : Sub-committee for co-ordinating Advanced Education in Mechanical
Engineering, FME, UTM
Date : (1996 – 1997)
8) Committee : In-house Project Exco, Automotive & Aeronautical Research Group,
UTM
Date : (1995 – 1996)
9) Committee : Establishment of New Course – Bachelor of Science Industrial Design
in UTM
Date : (1995 – 1996)
10) Committee: Co-curriculum UTM – Faculty’s Representative
Date : 1996 – Present
11) Committee: Establishment of New Course – Specialization in Automotive
Technology,
UTM
Date : 1997
12) Committee: Facilitator - Skim Latihan Akademik Bumiputra (SLAB) /UTM Course
Date : 1997
13) Committee: UTM Shooting Competition in Conjunction with UTM’s 25th
celebration.
Date : 1997
14) Committee: Facilitator – Seminar & Workshop on Rakan Muda, Johor at
UTM.
Date : 1997
15) Committee: Vehicle Relocation FME, UTM
Date : (Appointment 1998 – 2000)
16) Committee: Member - Manufacturing Focus Group
Date : 1998 – present
17) Committee: Academic Board FME, UTM
Date : (Appointment Jan 1999 – present)
18) Committee: Colloquium Committee – Mech. Eng Faculty
Date : (Appointment 1st May 2000 - 1st May 2002)
19) Committee: Academic Coordinator FME, UTM
Date : (Appointment 23rd May 2000 - present)
20) Committee: Design Seminar Committee Member (Paper review Committee)
Date : (Appointment Jan 2000- Jan 2001)
21) Committee: Member - Faculty of Mechanical Engineering Welfare Board
Date : (Joint from Jan 2000)
22) Committee: Sultanah Zanariah Library's Customer Focus Group
Date : (Appointment September 2000)
23) Committee: Industrial Training Committee, FME
Date : (Appointment January 2000 – December 2003)
23) Committee: Committee Member - Post Graduate Study
Date : (Appointment January 2001 – December 2002)
24) Committee: Committee Member – FME Human Resources Development
Date : (Appointment January 2001 – December 2002)
25) Committee: Administration Committee, FME.
Date : (Appointment January 2001- January 2007)
26) Committee : Research Coordinating Committee, FME
Date : (Appointed January 2002)
27) Committee: Relocation Committee, FME
Date : (Appointed August 2002)
28) Committee: ISO 9000 (2000) Implementation Committee, FME
Date : (Appointed October 2002 – May 2003)
29) Committee: ISO 9000 (2000) Implementation Committee, FME
Date : (Appointed May 2003 – April 2005)
30) Committee: Quality Assurance Implementation Committee, FME
Date : (Appointed June 2003 – May 2005)
31) Committee: Teaching & Learning Assessment Reviewing Committee, UTM
Date : (Appointed March 2008 – December 2008)
32) Committee : Post-Graduate Studies Committee, FME
Date : (1st April 2009 - 31st March 2011)
Committees Outside UTM
1) Committee : Industrial Design Glossaries, Dewan Bahasa & Pustaka, Kuala Lumpur
Date : (1989-1991)
2) Committee : Cultural & Arts Informations Network System (CAINS), ITM, Shah
Alam
Date : 1997 – Present
3) Committee : Questions Drafter – Machine Drawing for HSC, Examination , Malaysia
Examination Council, Ministry of Education
Date : 1989
4) Committee : Malaysian Community of Cheetham Hill (MCCH), Cheetham Hill,
Manchester
Date : (1993-1994)
5)Committee : Technical Committee for Surau Building, Surau Jalan Belibis-Undan,
Taman Perling, Johor bahru.
Date : (June 1999-July 2005)
6) Committee : Parents and Teachers Association, Seri Perling Secondary School.
Date : (April 1999 - April 2000)
7) Committee : Committee for Surau Building, Seri Perling Secondary School.
Date : (June 1999)
8) Committee : Exhibition Sub-Committee for Science & Technology Week JOHOR.
Date : (July-Sept 1999)
9) Committee : Secretariat Rakan Muda/ Rakan Rakan Reka Cipta JOHOR
Date : (March-Dec 1999)
10) Committee: Parents and Teachers Association, Seri Perling Secondary School.
Date : (April 2000 - April 2001)
11) Committee: Parents and Teachers Association, Taman Perling Primary School.
Date : (May 2000 - April 2001)
12) Committee: Curriculum Advisory Committee for Kolej Ugama Sultan Zainal Abidin
(KUSZA), Kuala Terengganu, Terengganu.
Date : (1999 – present)
13) Committee: Judging Panel for Malaysia Good Design Mark, Malaysia Design
Council, Ministry of Science and Environment.
Date : (1999, 2000, 2001, 2002, 2003)
14) Committee: Life Member - Malaysia Banjar Organisation
Date : (from Dec 1999 - present)
15) Committee: Ad-hoc Committee for JPA Diploma in Industrial Design’s Recognition,
Johor Bahru Polytechnic,
Date : (August 2001)
16) Committee: Parents and Teachers Association, Seri Perling Secondary School.
Date : (April 2002 - April 2003)
17) Committee: Parents and Teachers Association, Taman Perling Primary School.
Date : (May 2002 - April 2003)
18) Committee: Ad-hoc Committee for JPA’s Bachelor Degree in Industrial Design’s
Recognition, Universiti Putra Malaysia, Serdang, Selangor
Date : (September 2002)
19) Committee: Chairman – Ministry of Education Text Book Quality Control
Committee
Date : (April 2002 – May 2003)
20) Committee: Board of Accreditation Malaysia
Date : (Appointed May 2003 until now)
21) Committee: Chairman - Parents and Teachers Association, Seri Perling Secondary
School.
Date : (May 2003 - June 2004)
22) Committee: Academic Bureau - Parents and Teachers Association, Taman
Perling Primary School.
Date : (June 2003 - May 2004)
23) Committee: Chairman - Parents and Teachers Association, Seri Perling Secondary
School.
Date : (June 2004 - May 2005)
24) Committee: Board Member –Programme Evaluation for Degree in Industrial Design
Kolej Ugama Sultan Zainal Abidin, Kuala Terengganu.
Date : 18th July 2004 (appointed)
25) Committee: Vice-Chairman - Parents and Teachers Association, Seri Perling
Secondary School.
Date : (June 2005 - May 2006)
26) Committee: Motivation Bureau - Parents and Teachers Association, Taman
Perling Primary School.
Date : (June 2005 - May 2006)
27) Committee : Surau Al-Khautsar Management Committee, Taman perling, Johor
Bahru, Johor.
Date : (August 2005-July 2007)
28) Committee : Advisory Committee Rakan Muda - Rakan Reka Cipta, Student Affairs,
UTM
Date : (August 2005 – July 2007)
28) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,
Universiti Putra Malaysia, Serdang, Selangor.
Date : (September 2005 – present)
29) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,
Universiti Darul Iman Malaysia, Terengganu.
Date : (January 2006 – present)
30) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,
Universiti Kuala Lumpur (UniKL), Federal Territory.
Date : (March 2006 – present)
31) Committee : Curriculum Evaluation Committee for Diploma Industrial Design
Programme, Southern College, Johor Bahru, Johor.
Date : (December 2008)
7. TEACHING RESPONSIBILITIES
Industrial Design
Course : 1st Year, 2nd Year and 3rd Year B.Sc Mechanical Engineering
Year : 1983, 1984, 1986, 1987, 1988, 1989
Content : Introduction to Industrial Design, Definition, Design Process, Concept
Generation, Sketches, Engineering Drawing, Model Making, Experimental
Construction, Project Presentation.
Design I
Course : 2nd Year B.Sc Mechanical Engineering
Year : 1995, 1996, 1997
Content : Introduction to Industrial Design, Definition, Design Process, Product Planning, Market Survey, Concept Generations, Sketches, QFD, Ergonomics, Engineering Drawing, Production Techniques, Project Presentation.
Design II
Course : 3rd Year B.Sc Mechanical Engineering
Year : 1995, 1996, 1997, 1998
Content : Product Planning, Market Survey, Concept Generations, Sketches, QFD,
Concurrent Design, Ergonomics, Production Techniques, Product Costing,
Engineering Drawing, Project Presentation.
Introduction To Design
Course : 2nd Year B.Sc Mechanical Engineering (4 years course)
Year : 1996, 1997, 1998
Content : Introduction to Industrial Design, Definition, Design Process, Product
Planning, Market Survey, Concept Generations, Sketches, QFD,
Ergonomics, Engineering Drawing, Production Techniques, Project
Presentation.
Engineering Drawing
Course : 1st Year B.Sc Mechanical Engineering
Year : 1983, 1984, 1986, 1987, 1988, 1989
Content : Techniques of Writing and Drawing lines, Geometry Drawings, First and Third Angle Projection, Isometrics, True lengths and Shapes, Intersections, Development of Surfaces, Sectional Drawing, Assembly Drawing, Detail Drawing.
Engineering Drawing
Course : 1st Year Diploma Mechanical Engineering
Year : 1983, 1984, 1986, 1987, 1988, 1989
Content : Techniques of Writing and Drawing lines, Geometry Drawing, First and Third Angle Projection, Isometrics, True lengths and Shapes, Intersections, Development of Surfaces, Sectional Drawing, Assembly Drawing, Detail Drawing
Engineering Drawing
Course : 1st Year B.Sc Electrical Engineering (Service Subject to Elect. Eng.
Faculty)
Year : 1986, 1987, 1988, 1989, 1996, 1997
Content : Techniques of Writing and Drawing lines, Geometry Drawings, First and
Third Angle Projection, Isometrics, Sectional Drawing, Assembly Drawing, Detail Drawing.
Engineering Drawing
Course : 2nd Year B.Sc Human Resources Management and Development
Year : 1996, 1997
Content : Techniques of Writing and Drawing lines, Geometry Drawings, First and
Third Angle Projection, Isometrics, Sectional Drawing, Assembly
Drawing
Product Design/System Design
Course : 5th Year B.Sc Mechanical Engineering
Year : 1995, 1996, 1997, 1998
Content : Written and Verbal Presentation Skill, Data Gathering Methods, Design
Processes, Problem Solving Techniques & Process, Production
Engineering Drawing, Material Selections, Design Production Quality,
Optional Design Topics.
Metrology Laboratory
Course : 2nd Year B.Sc Mechanical Engineering
Year : 1986, 1987
Content : Introduction to Metrology, Measuring Tools Machines, Surface
Roughness, Geometrical Accuracy
Industrial Design 01 (SRI 1014)
Course : 1st Year B.Sc Industrial Design
Year : 1997
Content : Intoduction to Design, Elements of Design, Principles of Design
Industrial Design 02 (SRI 1024)
Course : 1st Year B.Sc Industrial Design
Year : 1998
Content : Design Visualisation, Sketching, Rendering and Visual Presentation
Industrial Design 03 (SRI 2014)
Course : 2nd Year B.Sc Industrial Design
Year : 1999 - 2000
Content : Design Visualisation, Sketching, Rendering and Visual Presentation,
Design Process, Model Making.
Industrial Design 04 (SRI 2024)
Course : 2nd Year B.Sc Industrial Design
Year : 1999, 2000, 2001
Content : Design Research, Product Specification, Design Development, Design
Visualisation, Sketching, Rendering /Visual Presentation, Design
Process, and Model Making.
Industrial Design 07 (SRI 4014)
Course : 4th Year B.Sc Industrial Design
Year : 2002/2003
Content : Research Methodology, Product Specification, Design Development,
Design Visualisation, Sketching, Rendering /Visual Presentation, Design
Process, and Model Making.
Design Engineering (MMJ 2513)
Course : 1st Year Master of Science in Engineering
Year : 2001
Content : Design Process, Ergonomics, Design Methodology, Engineering
Analyses.
Industrial Design 08 (SRI 4025)
Course : 4th Year B.Sc Industrial Design
Year : 2002/2003
Content : Research Methodology, Product Specification, Design Development,
Design Visualisation, Sketching, Rendering /Visual Presentation, Design
Process, Design for Manufacturing and Model/prototype Making.
Workshop Practice (SRI 1062)
Course :1st Year B.Sc Industrial Design
Year : 2004
Content : Introduction to wood working machines and hand tools. Model making
techniques using wood materials.
Studio Presentation (SRI 1022)
Course :1st Year B.Sc Industrial Design
Year : 2004-2005
Content : Media and techniques, Sketching, drawing, panel presentaion techniques,
verbal presentation, presentation folio and documentation.
Sketching (SRI 1012)
Course :1st Year B.Sc Industrial Design
Year : 2004-2005
Content : Material, media, surface and sketching techniques.
Introduction to design (SMJ 3513)
Course : 3rd Year B.Sc Mechanical Engineering
Year : 2001-2005
Content : Introduction to Industrial Design, Definition, Design Process, Product Planning,Market Survey, Concept Generations, Sketches, QFD, Ergonomics, Engineering Drawing, Production Techniques, Project Presentation.
Introduction to design (SME 2512)
Course : 2nd Year B.Sc Mechanical Engineering
Year : 2005 - 2007
Content : Introduction to Industrial Design, Definition, Design Process, Product Planning, Concept Generations, Sketches, Creative techniques, Ergonomics, Engineering Drawing, Project Presentation.
Innovation Management & Product Development (SRI 4282)
Course : 4th year B.Sc Industrial Design
Year : 2007 - present
Content : Innovation Management, Intellectual Property, The Role of Technology Transfer in Innovation, Product & Brand Strategy, New Product Development (NPD), Managing NPD.
Innovation Management & Product Development (SRI 2083)
Course : 2nd year B.Sc Industrial Design
Year : 2008 - present
Content : Innovation Management, Intellectual Property, The Role of Technology Transfer in Innovation, Product & Brand Strategy, New Product Development (NPD), Managing NPD.
Digital Photography (Elective Course – Third Year- SRI 3013)
Course : 3rd year B.Sc Industrial Design
Year : 2009 - present
Content : History of photography, Photography equipment, Introduction to Digital photography, technical aspects of a Camera, Lenses, Special techniques, Lighting, Digital Imaging (picture into pixels, equipment for digital imaging, editing digital images)
8. SUPERVISION OF THESIS
A. Bachelor of Mechanical Engineering
1) Student :Abdul Wahab bin Jaafar
Title : Design of a Pesticide Sprayer for Tobacco Cultivation
Year : 1990 - 1991
2) Student : Mohamed Ibrahim bin Ismail
Title : Oil Palm Fresh Fruit Bunch (FFB) Loose Fruits Collector Design
Year : 1995 – 1996
3) Student : Mohd. Saleh bin Sahri
Title : Design of a Mobile Field Kitchen
Year : 1995 – 1996
4) Student : Arif Kamal bin Yarudin
Title : Design of a Cross-kart
Year : 1995 – 1996
5) Student : Capt. Muhamad bin Abu Kassim
Title : Design of a Zeroing Deviced for Rifle M16 and Steyr AUG.
Year : 1995 – 1996
6) Student : Noor Azman bin Omar
Title : Development of a Low-powered Transporter
Year : 1996 – 1997
7) Student : Tan Soon Chiang
Title : Cub Prix Motorbike Design
Year : 1996 – 1997
8) Student : Lt. Comd. Norhayalim bin Abd. Aziz
Title : Portable Catamaran Sailing Boat Design
Year : 1996 – 1997
9) Student : Ismi Haidar bin Othman
Title : Cub Prix Motorbike Design Development (scope: Chassis, fairing,
Engine support design)
Year : 1996 – 1997
10) Student : Mohd Shahriman bin Sallehuddin
Title : Cub Prix Motorbike Design Development (Scope: Fairing design, fork,
trailing - arm design)
Year : 1996 – 1997
11) Student : Mohd Zamri bin Othman
Title : Fibre-glass Racing Boat Design
Year : 1997 – 1998
12) Student : Zahrin bin Zain
Title : Design of a Super-kart F1 (Scope: Fairing, Steering, Brake system)
Year : 1997 –1998
13) Student : Noradnan bin Masoud
Title : Design of a Super-kart F1 (Scope: Chassis, Engine Mounting,
Transmission)
Year : 1997 – 1998
14) Student : Mej. Tofrowaih bin Hj. Mat Amin
Title : Design of a Powered Target for Army Rifle Range
Year : 1997 – 1998
15) Student : Mohd Nizam bin Mohd Noor
Title : Design of a Trailer for Carrying an Assault Boat
Year : 1997 – 1998
16) Student : Yusoff Awang Damit
Title : Human-powered Water Vehicle
Year : 1998 – 1999
17) Student : Lt. Afanizam bin Ali
Title : Design of a Zeroing Device for Browning and Heckler & Koch Pistols.
Year : 1998 – 1999
18) Student : Lt. Adi Ashran bin Mohd Salleh
Title : Mobile Field Kitchen Design (Scope: Design Refinement and
Fabrication)
Year : 1998 – 1999
19) Student : Zulkifli bin Yaacob (Co-supervision with Mr. Yahya Ramli)
Title : Hydraulics System Design for Moving Target
Year : 1998 - 1999
20) Student : Abdul Halim bin Mahat
(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)
Title : Oil Palm Trunk Mulcher
Year : 1998 – 1999
21) Student : Muhamad Kahirul bin Abdul Hamid
(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)
Title : Oil Palm Bunch Mulcher (A)
Year : 1998 – 1999
22) Student : Lokman bin Haji Hussin
(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)
Title : Oil Palm Bunch Mulcher (B)
Year : 1998 –1999
23) Student : Mohd Tahir bin Shaharom
Title : Mobile Field Kitchen ( scope – components design and analyses)
Year : 1998 – 1999
24) Student : Khaizul Azman bin Kasa
Title : Solar Tricycle (scope – concept design)
Year : 1998 -1999
25) Student : Zakaria bin Ismail
Title : Design of an Electronic Target
Year : 1998 - 1999
26) Student : Navin Kumar A/L Channa Krishnan (ATMA)
Title : Design of a Military Combat Shovel
Year : 1998 – 1999
27) Student : Balvinder Singh A/L Jaktar Singh (ATMA)
Title : Helmet-cum-Ear Protector for Artilery Personnel
Year : 1998 – 1999
28) Student : Chia Wing Thye (ATMA)
Title : Mobile Field Toilet for Malaysia Arm Forces.
Year : !998 - 1999
29) Student : Mohamed Fadzly bin Abdul Kadir (ATMA)
(Co-supervision with Mr. Mohd Yazid bin Yahya)
Title : Pontoon Bridge Design for Military Application
Year : 1998 – 1999
30) Student : Fadzly bin Fadzil (ATMA)
Title : Pentas Tabik Hormat Mudah-alih (saluting dice)
Year : 1999 - 2000
31) Student : Suresh A/L Subramaniam (ATMA)
Title : Steyr AUG Rifle Design Concept
Year : 1999 - 2000
32) Student : Mohamad Saiful bin Mohamad Rathy (ATMA)
Title : Disposable Field Toilet
Year : 1999 - 2000
33) Student : Norhisham bin Hassan (ATMA)
Title : Portable First Aid Kit
Year : 1999 - 2000
34) Student : Hasmawi bin Abdullah Hashim (ATMA)
Title : Combat Cross-bow for Army Special Forces
Year : 1999 - 2000
35) Student : Khairul Amir bin Mohd Yusuff
Title : Rekabentuk Super-kart CVT
(Co-supervision with Dr. Kamarul Baharin Tawi)
Year : 1999 - 2000
36) Student : Mohd Firdaus bin Che Sab (SPACE - Kulim Hi-Tech)
Title : Super-kart Formula-1 (Scope: Fairing)
Year : 1999 - 2000
37) Student : Koay Heng Kia (SPACE - Kulim Hi-Tech)
Title : Human-Powered Water Recreational Vehicle - Basikal Air
Year : 1999 - 2000
38) Student : Mohd Sufian bin Mamat
Title : Mobile Field Kitchen (scope: component design)
Year : 1999-2000
39) Student : Norazlan bin Abdul Kadir
Title : Design of a Combat Tent
Year : 1999/2000
40) Student : Hasrul Abu Hasan
Title : Design of an NGV Motorcycle
Year : 1999/2000
41) Student : Safarudin bin Jemain
Title : Design development of an Artilery Helmet-cum-Ear Protector
Year : 1999/2000
42) Student : Rosdi bin Baharin
Title : Design of an NGV Motorcycle.
Year : 1999/2000
43) Student : Rapizan bin Rahman
Title : Design of a Wheel Chair-cum Stretcher
Year : 1999/2000
44) Student : Zahrul bin Zakaria
Title : Electronic Dart Target Design Development
Year : 1999/2000
45) Student : Noor Azwaimi bi Mohamad Noor (ATMA)
Title : Design Development of a Zeroing device for M16 and Styr AUG
Year : 2000/2001
46) Student : Leong Cheng Sheung (ATMA)
Title : Design Development of a Combat Cross-bow for Army Special Forces.
Year : 2000/2001
47) Student : Wan Mohd Zulkhibri bin Wan Mohd Zain
Title : Design Development of a Catamaran Sailing Boat for ROTU, UTM
Year : 2000/2001
48) Student : Wong Chiew Yin
Title : Design Concept of a Tool for Fixing Concrete Steel Structure
Year : 2000/2001
49) Student : Asraffadel bin Ishak
Title : Design concept of a Safety Helmet for JPA3 Rescue Team
Year : 2000/2001
50) Student : Cheah Hun Lim
Title : Design Development of a Wheel Chair-cum-Stretcher
Year : 2000/2001
51) Student : Muhamad Ismanizam bin Isnin
Title : Design development of an NGV Cub Motorcycle
Year : 2000/2001 (co-operation with FKKKSA, UTM)
52) Student : Mohd Aman bin Armawai (ATMA)
Title : M16 dan Styr AUG rack design
Year : 2000/2001
53) Student : Fakhrul Dahri bin Muhamed
Title : Design development of Super-kart F1 components
Year : 2000/2001
54) Student : Faizal Muhamad bin Nasir
Title : Design development of Super-kart F1 components
Year : 2000/2001
55) Student : Muhammed Azwan bin Ashaari
Title : To design a multi-purpose hospital bed
Year : 2000/2001
56) Student : Mohd Rizal bin Ehsa
Title : PALAPES’s Field Kitchen components design development
Year : 2000/2001
57) Student : Mohd Zaidy bin Mohamad Nasir
Title : PALAPES UTM’s Boat Trailer design development
Year : 2000/2001
58) Student : Mohd Nizam bin Zakaria
Title : To design a portable "Dehydration" unit
Year : 2000/2001
59) Student : Haryani bt. Md. Yunos
Title : Design development of a multi-purpose hospital bed
Year : 2001/2002
60) Student : Suraya bt. Sikas
Title : To design a mobile clinic
Year : 2001/2002
61) Student : Mazlan bin Abd Majid
Title : Design develoment of a Combat Cross Bow for Army Special Forces
Year : 2001/2002
62) Student : Leong Siew Lee
Title : To design a solar street light
Year : 2002/2003
63) Student : Chong Ren Pian
Title : To design a solar decoration light for residential used
Year : 2002/2003
64) Student : Mohd Alfian bin Mohd Mustafa Azmi
Title : To design a portable flat tyre changing device
Year : 2002/2003
65) Student : Abby Hazrin bin Ibrahim
Title : To design a catamaran deck (for PALAPES (marine) UTM)
Year : 2002/2003
66) Student : Asmawati bt Mansor
Title : To design a continuous weighing and packing machine for food
industry
Year : 2002/2003
67) Student : Chan Yew May
Title : To study the role of Elements of Design to fulfill the needs of
ergonomics for industrial product.
Year : 2002/2003
68) Student : Tan Kuam Keng
Title : Design concept Styling of a Malaysia Mobile Home
Year : 2002/2003
69) Student : Teo Hwee Hong
Title : Design concept of a SWATH boat for tourist purposes.
Year : 2002/2003
70) Student : Nur Lukman bin Ahmad Suhaimi
Title : Design of a Multi-purpose Trailer Wagon.
Year : 2002/2003
71) Student : Halijah bt. Ibrahim
Title : Design/styling of a Malaysian MPV
Date : 2002/2003
72) Student : Ezwan Ekmal bin Khalid
Title : Concept Design of a Mini Power Boat
Date : 2002/2003
73) Student : Teo Pei Kian
Title : Concept and Styling of a Malaysian Motorhome
Date : 2002/2003
74) Student : Zafrul Izzaq bin A. Aziz
Title : Study on the problem and design of a portable public toilet
Date : 2003/2004
75) Student : Lim Sook Choo
Title : A study of successful product design by Malaysian Product Designers
Date : 2003/2004
76) Student : Farihah binti Ismail
Title : To design a garbage collector for river.
Date : 2003/2004
77) Student : Tan Ee Fei
Title : The importance of Ergonomics for consumer products
Date : 2003/2004
78) Student : Wong Chis Sing
Title : Role and contributions of Industrial Designers in Automotive industry
Date : 2003/2004
79) Student : Yoong Fui Ni
Title : Role and importance of elements of design in furniture design
Date : 2003/2004
80) Student : Hii Ching Chyn
Title : The study on the application of electronic technology for consumer
products (electronic musical instrument)
Date : 2003/2004
81) Student : Mohamed Faizal bin Ahmad Puzi
Title : The Model making Process in Automotive industry with reference to
Proton
Date : 2003/2004
82) Student : Josiah Chong Wun Tzen
Title : The Role of Industrial Design in Product identification
Date : 2004/2005
83 Student : Zarini bt Zainal Abidin
Title : Colour study on children age 4-6 years old.
Date : 2004/2005
84) Student : Lim Yao Han
Title : Presentation Techniques in Industrial Design
Date : 2004/2005
85) Student : Sugeh Budee bin Qamaruzzaman
Title : Ergonomics study and design of a computer table
Date : 2004/2005
86) Student : Neau Ker Sing
Title : Definition of Function and Aesthetics in Todays Industrial Products
Date : 2004/2005
87) Student : Saiful Bahari Ahmad
Title : Car Dashboard Design – A study
Date : 2004/2005
88) Student : Mohd Hafez bin Md. Noor
Title : Case Study on The Facilities Required in Running Industrial Design
Degree Course in Institution of Higher Learning in Malaysia.
Date : 2005/2006
89) Student : Mohd Hafiz bin Zaabar
Title : Case Study on Industrial Design Curricullum in Institution of Higher
Learning in Malaysia.
Date : 2005/2006
90) Student : Tay Jie Wen
Title : A Study on Elements of Design in Furniture Design.
Date : 2005/2006
91) Student : Gun Lek Seng
Title : A Case Study on Elements of Design in Mobile Phone Design.
Date : 2005/2006
92) Student : Amir Fadzli bin Abd Ghani
Title : The Role of Sketching and Drawing in Generating Creativity
Date : 2006/2007
93) Student : Norulhisyam bin Samsudin
Title : The Development in National Car Design.
Date : 2006/2007
94) Student : Mohd Rashdan bin Omar
Title : Study on Kelantan Top Design Development and Designing Product with
Top’s Motive
Date : 2007/2008
95) Student : Mohd Khaidir bin Jusoh
Title : Design Development of Popular Sports Trophy in Malaysia
Date : 2007/2008
96) Student : Muhamad Suhaimy bin Imran
Title : Design of a Multi-purpose Bed
Date : 2007/2008
97) Student : Nor Mohd Irshahrin bin Nordin
Title : To Study and Design of a Portable Public Toilet
Date : 2007/2008
98) Student : Mohd Ridhwan bin Zainal Abidin
Title : A Device to Collect Garbage in the River
Date : 2007/2008
99) Student : Law Jian Haw
Title : Case Study on the ID students at Institute of Higher Learning
Performance in Sketching.
Date : 2007/2008
100) Student : Wong Kah Fei
Title : Green Design- Designer Role & Responsibility
Date : 2008/2009
101) Student : Tan Lip Chong
Title : The Role & Importance of Elements of Design in Furniture Design
Date : 2008/2009
102) Student : Ng Way Gan
Title : The Study of Wood Shaping and Forming Technology in Furniture
Making
Date : 2008/2009
103) Student : Chia Lee Ping
Title : The Comparison of Surrealism and Funky on Product
Date : 2008/2009
104) Student : Lee Cheng Yee
Title : Study of Ergonomics on Control Interface Between Human and
Electronic Product
Date : 2008/2009
105) Student : Woo Kin Hee
Title : Permissible Design in Manufacturing Plastic Products
Date : 2008/2009
106) Student : Yasmin bt Musa
Title : The Elements of Design in Furniture
Date : 2008/2009
107) Student : Khor Ling Shan
Title : Design Evolution of Concept Car
Date : 2008/2009
108) Student : Nasaruddin Shah bin Morani
Title : 2008/2009
Date : The Adaptation of Computer 3-D Modelling for Industrial Design
B. Master of Engineering
1) Student : Yusri bin Yusof
Title : Product Design Cycle
Year : 1997 – 1999 (incomplete)
2) Student : Zakaria bin Ibrahim (co-supervised)
Title : An Examination of the Use of Cross-functional Teams/Concurent
Engineering in Design of a New Product
Year : 1998 – 1999 (withdrawn)
3) Student : Suhaimy bin Ahmad (co-supervised)
Title : Rekabentuk Konsep Penutup (Canopy) untuk motosikal
Year : 2001 – 2002 (completed his degree at Faculty of Education, UTM)
4) Student : Noor Azizah bt. Awang @ Shafie (Main Supervisor)
Title : Ergonomic Design for Hovercraft Interior
Year : November 2002
5) Student : Nor Azmin bin Md. Nor (co-supervised)
Title : A Study On Manual Handling (Mh) And Its Hazards Towards
Malaysian Palm Oil Harvesters
Year : June 2005
9. SUPERVISION OF STUDENTS ACTIVITIES
9.1 Training (In-campus training)
a) Project Title : Fabrication of a “cross-cart” Prototype
Duration : 6 weeks (May – June 1988)
No: of Students : 12 students
b) Project Title : Design Development and Fabrication of a “cross-cart” Prototype
Duration : 6 weeks (May – June 1989)
No: of Students : 8 students
c) Project Title : Design and Fabrication of a Go-cart
Duration : 6 weeks (May – June 1990)
No: of Students : 8 students
9.2 Supervision of Students Industrial Training (Out-campus Training)
1984: Kilang Peluru, Batu Arang, Selangor
1987: Suzuki Assembly, Prai, Penang; Hong Leong Shipyard, Prai, Penang
1988: Mattel Malaysia Private Limited, Seberang Prai; GEC, Kulim, Kedah
1989: Kilang Kelapa Sawit Jawi, Jawi, Seberang Prai; Kedah Sugar Refiney
Limited
1990: Motorola , Sg, Way, Petaling Jaya, BATA (M) Sdn. Bhd. Klang, Selangor
1991: Several factories in Sg. Way and Petaling Jaya.
1997: Robert Bosch (M) Sdn. Bhd, Bayan Lepas, Penang; Hewlett Packard (M)
Sdn.Bhd, Bayan Lepas, Penang; Siemens Semiconductors Sdn. Bhd, Bayan
Lepas, Penang; Intel Technology Sdn. Bhd, Bayan Lepas, Penang; Escoy
Smelting, Jalan Datuk Keramat, Penang
2002: GKY Machinery (M) Sdn. Bhd, Johor; Taichong Engineering & Steelworks
Sdn. Bhd.; Tanah Temasik Sdn. Bhd, Johor; Harta Consults Sdn. Bhd.
Johor; Pejabat Pengarah Kerja Raya Johor; Broadway Foam Sdn. Bhd.,
Johor, Plastrade Group of Companies, Johor; Volvo Malaysia Sdn. Bhd.
Johor; Oriental Assemblers Sdn. Bhd. Johor; Orcadesign Consultants Sdn.
Bhd. Johor.
9.3 Organising/supervising Students Project/Activities:
1. Organised study visit to Industrial Design Department, Faculty of Art & Design , UiTM, Shah Alam ( July 1999)
2. Organised study visit to Industrial Design Department, Faculty of Art & Design , UiTM, Shah Alam and ITEX 2000 Exhibition at The Mines KL (Aug 2000)
3. Organised study visit to SWAN STABILLO factory at Tampoi, Johor Bahru (Mac 2001)
4. Co-Organiser SWAN STABILLO Ball-point Pen Design Competition ( Mac-May 2001)
5. Organised study visit to Bean Sprout Sdn. Bhd (for designing project on bean sprout cleaning machine, separating machine and weighing & packing machine) (Nov 2001)
6. Organised study visit to PROTON Shah Alam for Industrial Design Degree students’
(1st February 2002)
7. Organised “Industrial Design Night” held at Pulai Spring Resorts (2002,2003, 2004, 2005, 2006, 2007, 2008, 2009)
8. Organised “Industrial Design Saturday” held at Dewan Sultan Iskandar, UTM (2005)
9. Organised “Industrial Design Final Year Degree Show” (2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009)
10. Organised Industrial Design Motivation Camp held at Sekakap Camp, Mersing (2005, 2006, 2007, 2008)
11. Organised “Industrial Design Saturday” held at Dewan Sultan Iskandar, UTM (2008)
10. ASSESSMENT ROLE
1. Examiner – STPM/HSC Art Paper (1988 – 1989)
2. External Examiner – Final Year Diploma Art & Design (Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( 1987 – 1988)
3. Thesis External Examiner - Final Year Diploma Art & Design (Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( 1987 – 1988)
4. Assessor – Article word entry “Tank” for Science and Technology Encyclopedia, UTM/DBP (1996)
5. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), MARA Institute of Technology, Shah Alam, Selangor (Oct, 1998)
6. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( May, 1999)
7. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( 3-4 Nov, 1999)
8. Internal Examiner - Master of Engineering (Mechanical) School of Post-Graduate Studies, UTM, Kampus Skudai, Johor (Oct 1999) Candidate: Md. Afendi M. Yusuf) (Title: The Study of Model Making Using Parafine Wax)
9. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan & Tan, Jln Tun Razak, Kuala Lumpur. (18 Nov, 1999)
10. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor ( 28-29 April, 2000)
11. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan & Tan, Jln Tun Razak, Kuala Lumpur. (3rd August, 2000)
12. Judging panel - Design Project for Secondary School in conjunction with Kolej Tun Hussien Onn Cultural Day "Eksvanitra" 2000, UTM. (12th August, 2000)
13. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan & Tan, Jln Tun Razak, Kuala Lumpur. (19th September, 2000)
14. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor ( 8-9 November, 2000)
15. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor ( 19th – 20th April, 2001)
16. Judging Panel – Swan STABILLO Ball-point Pen Design Competition, Organiser by Swan Stabillo (M) Sdn. Bhd, Kawasan Perindustrian Tampoi, Johor and Faculty of Mechanical Engineering, UTM. (4th July 2001)
17. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan & Tan, Jln Tun Razak, Kuala Lumpur. (21st August, 2000)
18. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor
( 3rd – 4th October, 2001)
19. Judging Panel – Go-cart design competition, Organiser by Kolej Universiti Teknologi Tun Hussien Onn, Batu Pahat, Johor. (9th-11th November 2001)
20. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor ( 28-30 March, 2002)
21. External Examiner – Final Year Diploma in Industrial Design, for Kolej Ugama Sultan Zainal Abidin (KUZA), Kuala Terengganu, Terengganu (17-19 February 2002)
22. External Examiner – Final Year Diploma in Industrial Design, for Polytechnic Johor Bahru, Johor (19 April 2002)
23. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan & Tan, Jln Tun Razak, Kuala Lumpur. (30th July, 2002)
24. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design (Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (30 September – 1 October, 2002)
25. Judging Panel – IKM (Institut Kemahiran MARA) Design Competition held at IKM,
Jasin, Melaka (26-27 October 2002)
26. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan & Tan, Jln Tun Razak, Kuala Lumpur. (19 November, 2002)
27. External Examiner – Master of Art & Design (Industrial Design), Universiti Teknologi MARA, Shah Alam, Selangor (18 December 2002), Candidate: Imran bin Abdullah, (Title:The Tole of Industrial Design Consultants in Improving Malaysian Made Product)
28. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan & Tan, Jln Tun Razak, Kuala Lumpur. (31 July, 2003)
29. Judging panel – Science Innovation Project Competition for Secondary School in
conjunction with UTM’s 31st Convocation 2003, UTM. (7th August, 2003)
30. Judging Panel – IKM (Institut Kemahiran MARA) Design/Innovation Competition held at Malaysian Institute of Aviation Technology (MIAT), Sepang, Selangor (4-5 October 2003)
31. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, SIRIM, Shah Alam, Selangor. (6 January, 2005)
32. External Examiner – Master of Science (Product Design), Universiti Putra Malaysia, Selangor (22 March 2005) Candidate: Jamilludin bin Mohd Noor, (Title: Quality and Identity of Electrical Product Made in Malaysia from The Perspective of User and Relationship with New Product Development Policy)
33. External Examiner – 1st Year (2nd Semester) Bachelor of Applied Arts (Industrial Design), for Kulliyah of Architecture & Environmental Design, International Islamic University of Malaysia (Sept 2005)
34. External Examiner – Master of Art & Design (Industrial Design), Universiti Teknologi MARA, Shah Alam, Selangor (17 October 2005), Candidate: Mohammad Zaki bin Sharifuddin, (Title: Interaction Design Content and Method: A Case Study on Industrial Design Students)
35. External Examiner – 2nd Year ( 3rd Semester) Bachelor of Applied Arts (Industrial Design), for Kulliyah of Architecture & Environmental Design, International Islamic University of Malaysia (April 2006)
36. External Examiner – 2nd Year (4th Semester) Bachelor of Applied Arts (Industrial Design), for Kulliyah of Architecture & Environmental Design, International Islamic University of Malaysia (October 2006)
37. External Examiner – 3rd (5th semester) Year Bachelor of Applied Arts (Industrial Design), for Kulliyah of Architecture & Environmental Design, International Islamic University of Malaysia (21 March 2007)
38. External Examiner –2nd Year (4th semester) Diploma in Industrial Design, for Southern College, Johor Bahru, Johor (17 March 2007)
39. External Examiner –3rd Year (5th semester) Diploma in Industrial Design, for Southern College, Johor Bahru, Johor (17 March 2007)
40. External Examiner –3rd Year (6th semester) Diploma in Industrial Design, for Southern College, Johor Bahru, Johor (6 December 2008)
41. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for Kulliyah of Architecture & Environmental Design, International Islamic University of Malaysia (4 April 2008)
42. External Examiner –Doctor of Philosophy (Interior Design), Faculty of Architecture & Survey, Universiti Teknologi MARA, Shah aLAM, Selangor (2008) Candidate: Abdul Halim bin Abdul Manaf, (Title: School Furniture Ergonomics: Optimal Design Criteria for Standard Requirements in Malaysia Education System)
43. Internal Examiner – Master of Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, (2008) Candidate: Norzilawaty bt. Mohamed Samsudin (Title: Application of Quality Function Deployment in Multimedia Integrated Telephone Kiosk (MITek) Design)
44. Internal Examiner – Master of Science (Built Environment), Kulliyah of Architecture & Environmental Design, International Islamic University of Malaysia, (2009) Candidate: Mohd Yaser Omari (Title: An Ergonomic Concept Design of A Motorbike With Prototyping) (11 March 2009)
45. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for Kulliyah of Architecture & Applied Arts (20 April 2009)
46. Assessment Panel - for Malaysia Qualification Agency (MQA)(Formerly known as :
National Board of Accreditation (LAN) - Private Colleges & University Colleges
Assessed (2003-2007):-
1. Programme Name: Diploma Fotografi
• IPTS Name: Akademi Kewartawanan dan Komunikasi Hanxing
2. Programme Name: Diploma in Industrial Design
• IPTS Name: Institut Putra
3. Programme Name: Bachelor of Arts (Hons) in Animation & Games
Design
• IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing
4. Programme Name: Bachelor of Computer Animation
• IPTS Name: Kolej Universiti Teknologi Antarabangsa Twintech
5. Programme Name: Diploma in Industrial Design
• IPTS Name: PJ College of Art & Design
6. Programme Name: Bachelor in Games Art & Animation (Hons)
• IPTS Name: Kolej Universiti Teknologi & Pengurusan Malaysia
7. Programme Name: Diploma Seni Lukis & Seni Reka (Grafik & Media
Digital)
• IPTS Name: Kolej IKIP, Kuantan, Pahang.
8. Programme Name: Bachelor of Arts (Hons) in Games Art
• IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing
9. Programme Name: Bachelor of Arts (Hons) in Product Design &
Innovation
• IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing
11. SEMINAR/CONFERENCE/WORKSHOP/COURSES ATTENDED
11.1 Seminar/Conference/Workshop Attended:
1) Seminar : Japanese Handicraft
Venue : Equatorial Hotel, Kuala Lumpur
Date : 17th- 19th March 1983
Organiser : Japan External Trade Organisation (JETRO)
2) Seminar : Modeling & Simulation in Engineering
Venue : UTM, Jalan Semarak
Date : 4th – 5th June 1986
Organiser : Mechanical Engineering Faculty, UTM
3) Workshop : Workshop on Industrial Design
Venue : Ministry of Trade, Damansara, Kuala Lumpur
Date : 29th July 1988
Organiser : Malaysian Invention & Design Society (MINDS) and
Ministry of Trade
4) Workshop : Workshop on Airbrush Presentation Techniques
Venue : UTM, Jalan Semarak
Date : 22nd – 24th February 1988
Organiser : Training Unit, UTM
5) Seminar : Territorial Army Seminar
Venue : Territorial Army Training Center, Ipoh, Perak
Date : 21st – 22nd July 1989
Organiser : Territorial Army Directorate, Ministry of Defence
6) Workshop : Workshop on Translation
Venue : UTM, Skudai, Johor
Date : 24th – 26th July 1990
Organiser : DBP and UTM
7) Workshop : Workshop on Fisrt Year Engineering Education
Venue : UTM, Skudai, Johor
Date : 16th – 18th July 1991
Organiser : Training Unit, UTM
8) Seminar : Design Production
Venue : National University of Malaysia (UKM) Bangi
Date : 26th – 27th July 1991
Organiser : UKM’s Student Union, UKM
9) Seminar : Head of Art & Design on Art Education in U.K.
Venue : Rutland Hotel, Sheffield, UK
Date : February 1993
Organiser : Council of National Academic Awards (CNAA) U.K.
10) Seminar : Agricultural Mechanisation
Venue : Awana Golf Resort, Genting Highland
Date : 25th – 27h May 1993
Organiser : MARDI and Agri. Inst. Of Malaysia (AIM)
11) Conference: National Conference on Engineering Education and Research
Venue : Agricultural University (UPM), Serdang, Selangor
Date : 15th – 16th May 1993
Organiser : Engineering Faculty, UPM
12) Seminar : Rakan Muda Rakan Rekacipta
Venue : UTM, Skudai, Johor
Date : 16th January 1996
Organiser : Ministry of Culture & Sports
13) Workshop : Workshop on Total Quality Management
Venue : Kelana Kaya, Kuala Lumpur
Date : 3rd – 6th June 1996
Organiser : Army Training and Doctrine Headquarters, Ministry of Defence and
Department of Civil Services (JPA)
14) Conference: Design Conference
Venue : Shangri-La Hotel, Kuala Lumpur
Date : 14th – 16th October 1996
Organiser : Malaysian Design Council (MDC)
15) Conference: ASEAN Ergonomics 97’
Venue : Renaissance Hotel, Kuala Lumpur
Date : 6th – 8th November 1997
Organiser : South East Asean Ergonomics Society (SEAES) and University Malaysia
Sarawak (UNIMAS)
16) Seminar : Safety and Rescue Campaign
Venue : Puteri Pan Pacific Hotel, Johor
Date : 25th April 1998
Organiser : Malaysia Emergency Team (PTCM) Road Safety Council of Malaysia
17) Seminar : National Seminar on Invention and Design in Education 1998
Venue : Curriculum Development Centre, Ministry of Education, Kuala Lumpur
Date : 12th – 15th October 1998
Organiser : Malaysia Design Council and Ministry of Education Malaysia.
18) Seminar : Seminar on Smart Innovation – From R&D to Market
Venue : Industrial Center, Technovation Park, UTM, Skudai
Date : 21st November 1998
Organiser : Innovation Bureau and Consultancy, UTM.
19) Seminar : Seminar on Invention – Rakan Muda, Rakan Rekacipta 98’ (Presenter)
Venue : ITTHO, Batu Pahat, Johor.
Date : 28th December 1998
Organiser : Malaysia Design Council , Ministry of Science Environment and UTM.
20) Seminar : Education Convention 99, UTM
Venue : UTM, kampus Skudai
Date : 10th Novemvber 1999
Organiser : UNIPEN, Human Resources Development Unit, SPACE, UTM
21) Seminar : Forum on Malaysia's Economy with Majlis Tindakan Ekonomi Negara
(MTEN)
Venue : University Technology Malaysia
Date : 14th June 2000
Organiser : UTM and MTEN
22) Conference: Asia Pacific Design Conference and Design Exhibition 2000 (Presenter)
Venue : Putera World Trade Center, Kuala Lumpur
Date : 10th- 12th October 2000
Organiser : Malaysia Design Council & Japan Design Foundation (JDF)
23) Workshop : Wokshop on Rakan Muda Rakan Rekacipta Johor.
Venue : Dewan kuliah 1, Faculty of Mechanical Engineering, UTM, Skudai
Date : 9th November 2000
Organiser : Technology Design Center UTM and Ministry of Science, Technology &
Environment Johor.
24) Seminar : Design for The New Millennium (chairperson)
Venue : Hotel Puteri Pan Pacific, Johor Bahru, Johor
Date : 15th January 2001
Organiser : Design Dept.UTM, SIRIM and Malaysia Design Council.
25) Seminar : Managing Quality Measurement for Government Sector
Venue : PJ Hilton Hotel, Petaling Jaya
Date : 8th -9th August 2001
Organiser : National Productivity Council, Malaysia
26) Conference: First National Conference for Enterpreneur and Small Bussiness.
(Presenter)
Venue : Langkawi City Bayview Hotel
Date : 8th-9th September 2001
Organiser : Universiti Utara Malaysia
27) Conference: 5th Asian Design Conference and Design Symposium. (Presenter)
Venue : Seoul National University, South Korea.
Date : 11th – 13th October 2001
Organiser : KAIST, Korea; JDF, Japan; CDS, China.
28) Seminar : Education Convention 2001, UTM
Venue : Eden Garden Hotel,Johor Bahru, Johor.
Date : 7th November 2001
Organiser : UNIPEN, Human Resources Development Unit, SPACE, UTM
29) Conference: Malaysia Design Conference 2003
Venue : Pan Pacific Hotel,Kuala Lumpur.
Date : 8th – 9th October 2003
Organiser : Malaysia Design Council (Presenter)
30) Seminar : Learning Skill for SPACE Students.
Venue : Block N24 UTM Skudai , Johor
Date : 20th May 2004
Organiser : School of Profesional and Cotinuous Education (S.P.A.C.E.) UTM
31) Seminar : "Wacana Ilmu"
Venue : Dewan Senat, UTM
Date : 7/9/2004
Organiser : Human Resources Dept UTM
32) Conference: Conference on Engineering Education (CEE 2004),
Venue : Renaissance Hotel, Kuala Lumpur.
Date : 14-15th December 2004
Organiser : SPACE, UTM and Institute of Engineers Malaysia (IEM) & Malaysian
Council of Engineering Deans (MCED) (Presenter)
33) Seminar : "Network Centric Warfare"
Venue : Hyatt Regency Hotel, Teluk Cempedak, Kuantan
Date : 9-11/12/2004
Organiser : Ministry of Defence
34) Conference: National Conference on Skills & Competencies in Education
Venue : School for Humanities Studies, USM
Date : 29-30th December 2005
Organiser : School for Humanities Studies, USM (Presenter)
35) Seminar : Half Day Seminar On Engineering Education "OBE",
Venue : Rumah Alumni, UTM
Date : 9th December 2005
Organiser : Faculty of Chemical Engineering & Natural Resources Engineering,
UTM
36) Seminar : Forum on “Islam Hadhari”
Venue : Kolej Universiti Tun Hussein Onn, Batu Pahat
Date : 4/8/2005
Organiser : Kolej Universiti Tun Hussein Onn, Batu Pahat
37) Seminar : Territorial Army Commanding Officer’ Dialog
Venue : Guoman Hotel, Port Dickson
Date : Oct 2006
Organiser : Ministry of Defence
38) Seminar : Education Symposium
Venue : Persada Johor, Johor Bahru
Date : 5-6/12/2006
Organiser : HRD & CTL, UTM
39) Conference: Asia Design Network Conference
Venue : MATRADE Exhibition & Convention Center, Kuala Lumpur
Date : 30-31 October 2007
Organiser : Organised by Malaysia Design Council & Asia Design Network.
40) Conference: 2nd Regional Conference on Engineering Education RCEE 2007
Vanue : Persada Johor, Johor bahru, Johor
Date : 3rd – 5th December 2007
Organiser : Organised by Universiti Teknologi Malaysia, Institute of Engineers
Malaysia & Council of Engineering Deans Malaysia
41) Conference: International Conference of Applied and Creative Arts (ICACA 2008)
Venue : Faculty of Applied Arts & Design
Date : 16- 17 January 2008
Organiser : Organised by Universiti Malaysia Sarawak (UNIMAS), Kuching,
42) Workshop : Review of Generic Skills Assessment FME
Venue : Faculty of Mechanical Engineering
Date : 27 February 2008
Organiser : Faculty of Mechanical Engineering, Universiti Teknologi Malaysia
43) Conference: International Furniture Conference and Exhibition
Venue : PUTRA World trade Center, Kuala Lumpur
Date : 28-30 July 2008
Organiser : Organised by Universiti Teknologi MARA (Kelantan Branch)
44) Workshop : Learning Assessment System Reviewing Workshop
Venue : Klana Resort, Seremban, Negeri Sembilan
Date : 31st Oct – 2nd November 2008
Organiser : Centre for Teaching & Learning (CTL) , Universiti Teknologi Malaysia
45) Workshop : Academic Programme Assessment Review Workshop
Venue : Crown Princess Hotel, Kuala Lumpur
Date : 28-30 November 2008
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
46) Workshop : Internal Audit Assessment For Faculty of Chemical Eng. & Natural
Resources Engineering Workshop
Venue : Pulai Spring Resort, Johor Bahru
Date : 13-15 January 2009
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
47) Workshop : Programme Objective & Programme Learning Outcome Mapping
Workshop
Venue : Sofitel Palm Resort, Johor Bahru
Date : 17-18 February 2009
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
48) Workshop : Internal Audit Assessment For Faculty of Electrical Engineering
Workshop
Venue : UTM, Johor Bahru
Date : 25th May 2009
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
11.2 Courses Attended
1) Course : Lecturer’s Course
Venue : UTM, Jalan Semarak
Date : July 1987 (1 semester)
Organiser : Training Unit, UTM
2) Course : Quantitative and Qualitative For SLAB
Venue : University of Malaya
Date : 20th May - 29th June 1991
Organiser : Department of Civil Services (JPA)
3) Course : Company Weapon for Territorial Army (TA) Officers
Venue : Cadet Training School, Sebatang Karah, Port Dickson
Date : May – June 1983 (1 month)
Organiser : Territorial Army Directorate, Ministry of Mefence
4) Course : Tactic Course for Young Officers
Venue : Cadet Training School, Sebatang Karah, Port Dickson
Date : June – July 1984 (1 month)
Organiser : Territorial Army Directorate, Ministry of Defence
5) Course : Junior Staff Officer Course (Part 1)
Venue : Territorial Army Training Center, Ipoh, Perak
Date : November – December 1986 (1 month)
Organiser : Territorial Army Directorate, Ministry of Defence
6) Course : Junior Staff Officer Course
Venue : Territorial Army Training Center, Ipoh, Perak
Date : November- December 1989 (1 month)
Organiser : Territorial Army Directorate, Ministry of Defence
7) Course : Company Commander Course
Venue : Territorial Army Training Center, Ipoh, Perak
Date : October – Novembr 1995 (1 month)
Organiser : Territorial Army Directorate, Ministry of Defence
8) Course : Student Advisor
Venue : Pulai Springs Golf Resort, Johor
Date : 25th – 26th June 1996
Organiser : Mechanical Engineering Faculty, UTM
9) Course : Invention and Design Basic
Venue : Hotel Seri Malaysia, Johor
Date : 28th –30th October 1996
Organiser : Ministry of Education
10) Course : Design Lecture
Venue : Menara Tan & Tan, Kuala Lumpur
Date : 28th – 30th January 1997
Organiser : Malaysia Design Council
11) Course : Multimedia in Education
Venue : Faculty of Education, UTM, Skudai.
Date : 21st - 22nd April 1999
Organiser : Human Resources Development Unit, UTM
12) Course : Effective Supervision for Post Graduate Students
Venue : Dewan Jumaah, UTM, Skudai.
Date : 9th – 10th June 1999
Organiser : Human Resources Development Unit, UTM.
13) Course : Typesetting Documents with LATEX in Widows
Venue : Computer Laboratory, Faculty of Mechanical Engineering, UTM,
Skudai.
Date : 26th April 2000
Organiser : Information Technology Management & Computer Lab FME
14) Course : Workshop & Strategic Planning
Venue : Desaru Golden Beach Hotel, Desaru, Johor.
Date : 17th - 19th November 2000
Organiser : Gas Technology Research Group (GASTEG) FKKKSA, UTM, Skudai.
15) Course : Workshop & Strategic Planning
Venue : Hotel Seri Malaysia, Genting Highland.
Date : 20th-22nd January 2000
Organiser : Mechnanical Engineering Faculty, UTM, Skudai.
16) Course : Workshop & Strategic Planning
Venue : Hotel Seri Malaysia, Genting Highland.
Date : 3rd – 5th February 2001
Organiser : Mechnanical Engineering Faculty, UTM, Skudai.
17) Course : Managing Change
Venue : Holiday Inn Crowne Plaza, Johor Bahru, Johor.
Date : 8th – 10th May 2001
Organiser : Human Resources Department, Chancellery, UTM
18) Course : Project Management and Control.
Venue : Business and Advanced Technology Center (BATC), UTM, Kuala
Lumpur.
Date : 18th – 20th June 2001
Organiser : Human Resources Department, Chancellery, UTM
19) Course : Academic Supervision
Venue : Starhill Golf Resort Kempas, Johor Bahru, Johor
Date : 13th-14th June 2001
Organiser : Human Resources Department, Chancellery, UTM
20) Course : Managing Stress
Venue : Hyatt Hotel, Johor Bahru, Johor
Date : 21st – 22nd June 2001
Organiser : Human Resources Department, Chancellery, UTM
21) Course : Stratagic Planning Workshop
Venue : Century Hotel, Melaka
Date : 6th-8th July 2001
Organiser : Vice Chancellor Academic Office, UTM
22) Course : Corporate Management Course
Venue : Hyatt Hotel, Johor Bahru, Johor
Date : 27th – 28th August 2001
Organiser : Human Resources Department, Chancellery, UTM
23) Course : Workshop on SKT Assesment
Venue : Goodhope Hotel, Skudai, Johor Bahru, Johor
Date : 4th September 2001
Organiser : Human Resources Department, Chancellery, UTM
24) Course : Forum/Dialog on “Design” for Institution of Higher Learning and
Industries.
Venue : Concorde Hotel Shah Alam, Selangor
Date : 1st October 2001
Organiser : Malaysia Design Council.
25) Course : E-Learning
Venue : Computer Center UTM Block N25
Date : 31st August – 1st November 2001
Organiser : Human Resources Department and Design dept, FME, UTM
26) Course : Original Writing for Publication
Venue : Sofitel Hotel, Senai, Johor
Date : 5th-7th February 2002
Organiser : Human Resourced Development, UTM
27) Course : E-Learning
Venue : Computer Center UTM Block N25
Date : 16th- 17th January 2002
Organiser : Human Resources Developmenyt Unit and Design /Dept, FME, UTM
28) Course : Counseling Method in Organisation
Venue : Sofitel Hotel, Senai, Johor.
Date : 26th- 27th March 2002
Organiser : Human Resources Development Unit, UTM
29) Course : Biro Tata Negara
Venue : Kem Bina Negara, Meru, Klang, Selangor
Date : 25th – 29th May 2002
Organiser : Biro Tata Negara, Ministers’ Department, Putrajaya.
30) Course : Self Excellence and Organisation
Venue : Corus Resort , Port Dickson
Date : 23rd – 26th June 2002
Organiser : Human Resources Development Unit, UTM
31) Course : Workshop on Introduction to Accreditation
Venue : Pan Pacific Hotel, Johor Bahru
Date : 30th January 2003
Organiser : National Board of Accreditation Malaysia
32) Course : Introduction to ISO 9000 : 2000
Venue : Hotel Seri Costa, Melaka
Date : 17th-18th February 2003
Organiser : Faculty of Mechanical Engineering, UTM.
33) Course :Workshop on Quality Assurance
Venue : Allson Kelana Resort, Seremban
Date : 15th-18th October 2003
Organiser : Faculty of Mechanical Engineering, UTM.
34) Course : Proof Reading
Venue : Sofitel Golf Resort, Senai, Johor
Date : 10th-12th March 2004
Organiser : Publishing Unit & UNIPEN, UTM.
35) Course : Proficiency Level Course (PTK 6)
Venue : Post Graduate Center, UTM Skudai.
Date : 12th-28th April 2004
Organiser : Teaching & Learning Unit (UNIPEN) UTM
36) Course : "Generic Skill”
Venue : Rumah Alumni UTM
Date : (9-11/8/2004
Organiser : UNIPEN/HRD UTM)
37) Course : Emotional Intelligence (EI)
Venue : Awana Genting Golf Resort, Genting Highland, Pahang
Date : 11th-14th May 2004
Organiser : Army Training Headquarters (Intelligent Section), Ministry of Defence.
38) Course : Workshop – Updating L2 Subjects
Venue : Dewan Seminar, FME
Date : 27th January 2005
Organiser : FME, UTM
39) Course : Mengurus Pekerja Bermasalah “Managing Problematic Staff”
Venue : Grand Blue Wave Hotel, Johor Bahru
Date : 15-16 February 2005
Organiser : Human Resources Development Unit, UTM
40) Course : E-Learning Workshop
Venue : Dewan Seminar, FME
Date : 2nd March 2005
Organiser : FME, UTM
41) Course : Alias-Wavefront (Alias Studio Tools) Course
Venue : Computer Laboratory Block C23, FME
Date : 11th-15th March 2005
Organiser : FME, UTM STOP DI SINI 27 JUN isi boring Prof.
42) Course : UTM’s Programme Specification Pre-Workshop
Venue : Sofitel palm Resort Senai
Date : 12th March 2005
Organiser : Human Resources Development Unit & Center for Teaching & Learning
(CTL), UTM.
43) Course : UTM’s Programme Specification Workshop
Venue : Renaissance Hotel, Melacca.
Date : 6th-8th May 2005
Organiser : Human Resources Development Unit & Center for Teaching & Learning
(CTL), UTM.
44) Course : Adult Learning
Venue : Rumah Alumni
Date : 17th May 2005
Organiser : SPACE & Center for Teaching & Learning
(CTL), UTM.
45) Course : Workshop on "Outcome-Based Education
Venue : Rumah Alumni
Date : 14-15/12/2005
Organiser : FKKKSA, UTM
46) Course : Workshop on "PEMANTAPAN PENILAIAN DOKUMEN LAN"
Venue : Mutiara Hotel , Johor Bahru
Date : 27-29/9/2005
Organiser : National Acreditation Board
47) Course : Terrotorial Army Anniversary Dialog,
Venue : Universiti Kebangsaan Malaysia
Date : 19-21/7/2005
Organiser : Ministry of Defence
48) Course : “Space Management”
Venue : Mahkota Hotel, Melaka
Date : 3-5/2/2006
Organiser : Property Office, UTM
49) Course : "Strategic Planning"
Venue : Tanjung Balau, Desaru
Date : 24-26/2/2006
Organiser : FME
50) Course : Active Learning & Co-opperative Learning"
Venue : Pulai Spring Resort, Johor Bahru
Date : 25-26/4/2006
Organiser : CTL/HRD UTM
51) Course : "Outcome- based Education”
Venue : FME Seminar Hall
Date : 18-19/3/2006
Organiser : FME
52) Course : "Academic advisery"
Venue : FME Seminar Hall
Date : 30/8/2006
Organiser : FME
53) Course : "Problem-based Learning"
Venue : Puteri Pan Hotel, Johor Bahru
Date : 20-21/9/2006
Organiser : HRD & CTL
54) Course : "Programme Specification”
Venue : Mahkota Hotel, Melaka
Date : 10-12/11/2006
Organiser : , HRD & CTL UTM,
55) Course : "Student’s Portfolio"
Venue : Mahkota Hotel, Melaka
Date : 15-17/10/2006
Organiser : CTL & HRD, UTM
56) Course : "Academic Auditing”
Venue : Hyatt Hotel, Johor Bahru
Date : 26-28/11/2006
Organiser : CTL UTM
57) Course : Pemantapan Kertas Kerja Program B.ENG. Tech (Industrial Design
UniKL.
Venue : Water City Hotel Air Keroh, Melaka
Date : 4-16/12/2006)
Organiser: Faculty of Manufacturing Technology, Universiti Kuala Lumpur
(UniKL)
58) Course : Senior Command Course
Venue : Territorial Army Training Center, Ipoh, Perak
Date : 29 September – 11 October 2007 (2 weeks)
Organiser : Territorial Army Directorate, Ministry of Defence
12. PROJECT AND RESEARCH
a) A Mechanised Sprayer for Tobacco Cultivation in Malaysia
Research : Master Degree Project
Duration : September 1984 – June 1986
Venue : Manchester Polytechnic, Manchester, United Kingdom
Scope : Problem definition, design criteria, design specification, design
concept, proposed design, engineering drawing, presentation
drawing, model and report-cum-thesis.
b) Vacuum Packaging Machine
Position : Project leader
Duration : July 1989 - December 1990
Venue : University Technology Malaysia
Fund : Research & Consultancy Unit, UTM (RM5,000)
Scope : Market survey, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping of the final design.
c) Assault Boat Trailer Design
Position : Researcher/ Designer (under GRP Assault Boat design Group)
Duration : January 1991 – September 1991
Venue : University Technology Malaysia
Scope : Design concept, proposed design, engineering drawing.
d) The Potential Contribution of Industrial Design to the Adaptation of Agricultural Machinery for use in Malaysia
Research : Ph.D Project
Duration : November 1991 – March 1995
Venue : The Manchester Metropolitan University, Manchester, United
Kingdom
Scope : Problem statement, Literature review, Field study, Case study,
Sample studies Statistical analyses (SPSS PC+) Theoretical
analyses and findings, Recommendations
e) Design and Fabrication of a Super-kart F1
Position : Project Leader
Duration : August 1996 – December 1998
Venue : University Technology Malaysia
Fund : Research & Consultancy Unit, UTM
Scope : Market research, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping and testing of the final design.
f) Mobile Field Kitchen Design
Position : Project Leader
Duration : March 1998 – March 1999
Venue : University Technology Malaysia
Fund : Management Budget/ PALAPES, UTM
Scope : Field Study, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping and testing of the final design and
submission for Malaysia Army TQM Competition.
g) Catamaran Sailing Boat Design
Position : Project Leader
Duration : March 1998 – March 1999
Venue : University Technology Malaysia
Fund : Management Budget/ PALAPES, UTM
Scope : Field Study, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping and testing of the final design and
submission for Malaysia Army TQM Competition.
13. CONSULTANCY
a) Project : Speed Boat Design (under Marine Research Group)
Duration : Started 1997
Company : Diversified Marine Services (DMS), Pasir Gudang, Johor.
Scope : Design concept, presentation drawing.
b) Project : a) Washing Machine for ‘Pegaga’ (centella asiatica) herbs
: b) Grinding Machine for ‘Pegaga’ (centella asiatica) herbs
: c) Pressing Machine for ‘Pegaga’ (centella asiatica) herbs
Duration : Started September 1998
Company : Syarikat Perniagaan Orang Kampung Sdn. Bhd.
Scope : Groundwork study, Design concept, Engineering drawing, Prototying
And Testing.
c) Project : Telephone Booth Design
Duration : Started Oct 1999
Company : Payphone Sdn Bhd
Scope : Design Concept
d) Project : Bean Sprout Processing Machine Design
Duration : Julai - November 2001
Company : Bean Stalk Sdn Bhd, Pekan Nenas, Johor
Scope : Design Concept
e) Project : Multi Media Trolley Design
Duration : January 2003
Company : Gading Kencana Sdn Bhd, Subang Jaya, Selangor
Scope : Design Concept
14. PUBLICATIONS
14.1 Books
1. Industrial Design Glossary, Dewan Bahasa & Pustaka (DBP), Kuala Lumpur,
ISBN 983-62-3767-41, 1993
2. Encyclopedia of Science and Engineering, Word entry for “Industrial Design” field,
Dewan Bahasa & Pustaka (DBP), Kuala Lumpur (1999)
3. Warkah Anak Merdeka, Antologi Puisi Kemerdekaan dan Petriotisma, (sumbangan 2
buah puisi – ”Patrotisma Jiwa Merdeka & ”Semarak Merdeka”) Penerbit UTM,
(2007)
4. Buletin of The Mechanical Colloqium, Faculty of Mechanical Engineering, UTM
Vol.4 No.1 July 2007 – ”Physical Facilities for Industrial Design Programme to
Achieve Generic Skills”
14.2 National Papers
1. Dzulkifli Awang (1996) Design Challenge in Future, Seminar on Rakan Muda Rakan Rekacipta, Johor State Level, UTM, Organiser by UTM, MINDS and Ministry of Science and Environment, 16th January 1996 (presenter)
2. Dzulkifli Awang (1996) Invention, Design and Industrial Designers, Technology and Innovation in Education Course, Johor Bahru, Johor, Organiser by Faculty Of Education, UTM and Johor District Education Office, 29th-30th October 1996 (presenter)
3. Dzulkifli Awang (1996) Design Development of Mobile Field Kitchen, Arm Forces TQM /Innovation Project, Organiser by PALAPES UTM, UTM, Johor. (1996) (presenter)
4. Dzulkifli Awang (1996) Design and Industrial Design, Mechanical Engineering Faculty Colloquium, Organiser by MECH. ENG. FACULTY (1996) (presenter)
5. Dzulkifli Awang (1996) Catamaran Sailing Boat Design for ROTU (marine officers cadet), UTM, Organiser by PALAPES UTM (1996) (presenter)
6. Dzulkifli Awang & Kamal Azam Bani Hashim (1998) Study Opportunities for Design & Invention Subjects in Institutions of Higher Learning, Organiser by Curriculum Development Center, Ministry of Education, Jalan Duta, Kuala Lumpur 14th Oct 1998 (presenter)
7. Dzulkifli Awang (1998) Pendidikan Lanjutan Rekabentuk di IPT , Seminar on Rakan Muda Rakan Rekacipta, Johor State Level, UTM, Organiser by UTM, MINDS and Ministry of Science and Environment, 16th January 1998 (presenter)
8. Dzulkifli Awang (1999) Pendidikan Reka Cipta, Workshop on Rakan Muda Rakan Rekacipta, Johor State Level, UTM, Organiser by Pusat Rekacipta UTM and Johor State Education, 22nd May 1999 (presenter)
9. Dzulkifli Awang (1999) Design Development of Mobile Field Kitchen, Arm Forces TQM/Innovation Project, Organiser by Markas Tentera Darat, Ministry of Defence, Jalan Padang Tembak, Kuala Lumpur, 31st December 1999 (prersenter)
10. Dzulkifli Awang and Kamal Azam Bani Hashim (2000) Reka Cipta - Suatu Keperluan?, Workshop on Rakan Muda/Rakan Rekacipta, in conjunction with Minggu Penggalakan Sains dan Teknologi Johor, Organiser by Pusat Rekacipta UTM and Ministry of Science, Technology & Environment Johor, University Technology Malaysia, Skudai, Johor 9th - 11th November 2000 (joined paper)
11. Dzulkifli Awang (2001) Role and Contribution of Industrial Design in Small Industry Product, at City Bayview Hotel, Langkawi, Organiser by School of Business Management, University Utara Malayia, 8th-9th September 2001.
12. Dzulkifli Awang (2003) Malaysia Design Conference: Industrial Design Curriculum in Universiti Teknologi Malaysia, Malaysia Design Conference & Exhibition, Putera World Trade Center, Kuala Lumpur, Organiser by Malaysia Design Council (MDC) 8th-10th October 2003 (presenter).
13. Dzulkifli Awang (2003) Industrial Design in Engineering Curricullum, Conference on Engineering Education, Renaissance Hotel, Kuala Lumpur, Organiser by School of Professional and Continuous Education (SPACE) UTM, Institute of Engineers Malaysia and Malaysian Council of Engineering Deans (MCED), 14-15th December 2004. (presenter)
14. Dzulkifli Awang (2005) Industrial Design in Mechanical Engineering Curricullum in UTM and the Emergence of a new course - Bachelor Science Industrial Design , National Conference on Skills & Competencies in Education, Organiser by School of Humanities, Universiti Sains Malaysia, 29-30th November 2005. (presenter)
15. Dzulkifli Awang (2007) Comparison Between “Project-Oriented Learning and Problem-based Learning (PBL) in Design Subjects; 2nd Regional Conference on Engineering Education RCEE 2007, Persada Johor, Johor bahru, Johor, Organiser by Universiti Teknologi Malaysia, Institute of Engineers Malaysia & Council of Engineering Deans Malaysia; 3rd – 5th December 2007 (presenter).
14.3 International Papers:
1. Dzulkifli Awang (2000) Malaysia Design: Culture, Identity and Globalisation, Asia Pacific Design Conference & Exhibition, Putera World Trade Center, Kuala Lumpur, Organiser by Malaysia Design Council (MDC) and Japan Design Foundation (JDF) 10th-12th October 2000 (presenter).
2. Dzulkifli Awang (2001) Design Made in Malaysia, Design Scene No: 52, Japan Design Foundation (JDF) Osaka, Japan.
3. Dzulkifli Awang (2001) Design Education for the New Millennium, 5th Asian Design Conference and Design Symposium, at Seoul National University, South Korea, Organiser by Korean Advance Institute of Science & Technology (KAIST), Japan Design Foundation (JDF) China Design Foundation., 11th – 13th October 2001.
4. Dzulkifli Awang (2007) Developing Design Curricullum for the Changing Design Environment, Asia Design Network Conference, Organiser by Malaysia Design Council & Asia Design Network, MATRADE Exhibition & Convention Center, Kuala Lumpur, 30-31 October 2007
5. Dzulkifli Awang (2008) Sketching & Drawing – An Aid to Creativity in Design, 2nd International Conference of Applied and Creative Arts (ICACA 2008), Organiser by Universiti Malaysia Sarawak (UNIMAS), Kuching, 16- 17 January 2008
6. Dzulkifli Awang (2008) Furniture Design – Research Based on Design Considerations
and Concepts of Aesthetics, International Furniture Conference and Exhibition,
PUTRA World trade Center, Kuala Lumpur, Organiser by Universiti Teknologi
MARA (Kelantan Branch) 28-30 July 2008 (presenter)
14.4 Working Papers
1. Formation of a new course – Bachelor of Science Industrial Design in University Technology Malaysia – submitted to Senate and Ministry of Education (1996)
2. Syllabus Draft - “Introduction to Design” (SMJ 2513) Subject for Degree in Mechanical Engineering 4 years course. (1998)
3. Formation of a new faculty – Faculty of Design & Technology in University Technology Malaysia – submitted to Senate and Ministry of Education (2003)
4. Formation of a new course – Master of Science Industrial Design in University Technology Malaysia – submitted to Senate and Ministry of Education (2007)
5. New Curriculum Development – 3 Year’s Curriculum (120 credits) - for Bachelor of Science Industrial Design in University Technology Malaysia - submitted to Senate and Ministry of Education (April 2007)
6. New Curriculum Development – 3 Year’s Curriculum (109 credits) - for Bachelor of Science Industrial Design in University Technology Malaysia - submitted to Senate and Ministry of Education (April 2007)
14.4 Lecture Modules
1. Dzulkifli Awang (1996) Industrial Design, 1st Edition, Faculty of Mechanical Engineering, UTM.
2. Dzulkifli Awang (1995) Industrial Design, 2nd Edition, Faculty of Mechanical
Engineering, UTM.
3. Dzulkifli Awang (2006) Studio Presentation (SRI 1032) Dept. of Design Faculty of
Mechanical Engineering, UTM
4. Dzulkifli Awang (2006) Sketching/Drawing (SRI 1012) Dept. of Design Faculty of
Mechanical Engineering, UTM
5. Dzulkifli Awang (2007) Innovation Management & New Product Development (SRI
2083) Dept. of Design Faculty of Mechanical Engineering, UTM
15. EXTRA-CURRICULAR ACTIVITIES
[pic]
15.1 Organisation
1) Reserve Officer Training Unit (ROTU/PALAPES)
Rank : Cadet Sergeant
Position : Platoon Sergeant
Service : July 1980 – June 1981
Unit : ROTU, MARA Institute of Technology, Shah Alam
2) Reserve Officer Training Unit (ROTU/PALAPES)
Rank : Cadet Staff Sergeant
Position : Company Quartermaster
Service : July 1981 – June 1982
Unit : ROTU, MARA Institute of Technology, Shah Alam
3) Reserve Officer Training Unit (ROTU/PALAPES)
Rank : Senior Under Officer (SUO)
Position : Detachment Commander
Service : July 1982 – April 1983
Unit : ROTU, MARA Institute of Technology, Shah Alam
4) Territorial Army (TA)
Rank : 2nd Lieutenant
Position : Platoon Commander
Service : 4 years (1983 – 1987)
Unit : 1st Battalion, Regiment 502 (TA), Ampang Camp, Kuala Lumpur
5) Territorial Army (TA)
Rank : Lieutenant
Position : Platoon Commander
Service : 4 years (1987 - 1991)
Unit : 1st Battalion, Regiment 502 (TA), Ampang Camp, Kuala Lumpur
1st Battalion, Regiment 501 (TA), Majidee Camp, Johor Bahru, Johor
6) Territorial Army (TA)
Rank : Captain
Position : Assistant Company Commander
Service : 2 years (1991 – 1996)
Unit : 1st Battalion, Regiment 501 (TA), Tebrau Camp, Tebrau, Johor Bahru,
Johor.
7) Territorial Army (TA)
Rank : Major
Position : Company Commander
Service : April 1995 – April 1996
Unit : 1st Battalion, Regiment 502 (TA), Tebrau Camp, Tebrau, Johor Bahru,
Johor.
8) Territorial Army (TA)
Rank : Major
Position : Attachment Staff Officer
Service : May 1996 – July 1997)
Unit : Reserve Officers Training Unit (ROTU/PALAPES) University
Technology Malaysia, Johor
9) Territorial Army (TA)
Rank : Major
Position : Company Commander
Service : August 1997 – August 1998
Unit : 1st Battalion, Regiment 502 (TA), Tebrau Camp, Tebrau, Johor Bahru,
Johor.
10) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Commanding Officer
Service : September 1998 - present
Unit : 2nd Battalion, Regiment 502 (TA), Muar Camp, Muar, Johor.
11) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Permanent Secretary for Commanding Officers' Meeting
Service : November 1998 - present
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
12) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Administration Exco for Territorial Commander’s Conference 2000
Service : Organising committee (May - August 2000)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
13) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for TA's 43rd Anniversary parade at Ipoh Stadium
(5th- 10th/6/2000)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
14) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Standby Parade Commander
Service : Standby Parade Commander for TA's 44th Anniversary parade at
Stadium Sultan Ahmad Shah, Kuantan, Pahang (28th June – 1st July
2001)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
15) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2004 Annual Camp Opening
Ceremony Parade (30th /9 - 15th/10/2003)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
16) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2004 Training Opening
Ceremony Parade (12th- 16th/1/2004)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
17) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2004 Training Opening
Ceremony Parade (16th March 2005)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
18) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Rank Investure Jawatankuasa Pendokong Askar
Wataniah Johor Ceremony Parade at Dataran Bandaraya, Johor Bahru,
Johor. (31st May, 2005)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
19) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for The Launching Parade of “Kompeni Perdana”
Johor State Level at Dataran Bandaraya, Johor Bahru, Johor.
23/11/2007)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
20) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2008 Training Opening
Ceremony Parade (11-17/3/2008)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
21) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2008 Training Opening
Ceremony Parade (13-15/2/2009)
Unit : Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
21) Territorial Army (TA)
Rank : Lieutenant Colonel
Position : Commanding Officer for 3rd Battalion
Service : Mei 2008 - present
Unit : 3rd Battalion, Regiment 502 (TA), Kluang Camp, Kluang, Johor.
P/S : for further detail on my involvement and contributions in TA, please refer to attached Biodata for TA.
15.2 Community Services
1) UMNO Committee (Auditor), Taman Sri Andalas UMNO Branch, Ulu Klang,
Selangor (1986)
Contribution/service : Social welfare of the branch community, up-keeping
surau AU4, gotong-royong.
2) Industrial Design Department, School of Art & Design, MARA Institute of
Technology, Shah Alam (1987 – 1989)
Contribution/service : Part-time Lecturing
3) MCCH (Malaysian Community of Cheetham Hill) Committee, Manchester, U.K.
(1993 – 1994)
Contribution/service : Malaysian students welfare – organising social and
Religious activities, housing, etc
4) Belibis/Undan Surau Construction Committee (1997 – present)
Contribution/service : Committee formed to Organiser the construction of a
surau for the benefits of the locals
5) AARG (Automotive and Aeronautical Research & development Group), Mechanical Engineering UTM (1996-1997)
Contribution/service : Participation in exhibition, video recording requested by
schools, video recording firms, sports Organisers, local
authorities.
6) Bandar Tenggara Secondary School, Bandar, Tenggara, Kulai Johor (1997)
Contribution/service : Design talks for Design Motivation Course
(4th November 1997)
7) British Petroleum (BP), TV3 and Ministry of Education (1997)
Contribution/service : Judging Panel for “BP Challenge” Semi-final held at
Plentong BP Station, Johor (13th September 1997)
8) British Petroleum (BP), TV3 and Ministry of Education (1997)
Contribution/service : Judging Panel for “BP Challenge” Final held at Education
Auditorium, Ministry of Education, Bukit Kiara, Kuala
Lumpur (22nd October 1997)
9) Bahagian Kemahiran MARA, Kuala Lumpur (1998)
Contribution/service : Judging Panel (Head of Judge) for IKM Design
Competition held at IKM, Sungai Petani, Kedah (14-15
August 1998)
10) School of Professional and Continuing Education (SPACE) (1995, 1996, 1997
1998)
Contribution/service : Lecturing in Industrial Design subject (SMM 3512) and
Product Design (SMM 5523)
11) Sek. Men. Rendah Taman Universiti (1999)
Contribution/service : Design Talks on Industrial Design (7/1/99)
12) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 1999
– May 2000)
Contribution/service : Committee Member
13) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 1999 –
May 2000)
Contribution/service : Committee Member - Surau design and fund collection .
14) Kolej Islam YPJ, Johor (Oct 1999)
Contribution/service : Talks on "Penghayatan Kemerdekaan"
15) Education Technology Department, Ministry of Education, Bukit Kiara and RTM2
(Oct 1999)
Contribution/service : Panel for "Bicara" live telecast educational
program
16) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 2000
– May 2001)
Contribution/service : Committee Member
17) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 2000 – May 2001)
Contribution/service : Committee Member - Surau design and fund collection .
18) Sekolah Kebangsaan Taman Perling, Parent & Teachers Association (April 2000 –
2001)
Contribution/service : Committee Member
19) Kolej Ugama Sultan Zainal Abidin (KUSZA), Kuala Terengganu, Terengganu
(February 2001)
Contribution/service : Talks on “ Industrial Training” for Diploma in Industrial
Design’s Students.
20) Kolej Siswa Desa Skudai, Universuti Teknologi Malaysia (19th May 2001)
Contribution/service: : Talks on “ Student Orientation Week” for UTM’s new
intake
21) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 2002 –
May 2003)
Contribution/service : Committee Member - Surau design and fund collection .
22) Sekolah Kebangsaan Taman Perling, Parent & Teachers Association (April 2002 -
2003)
Contribution/service : Committee Member
23) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 2002
– May 2003)
Contribution/service : Committee Member
24) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (2002)
Contribution/service : Design a Parents & Teachers Association Logo and
Letterhead
25) Bahagian Kemahiran MARA, Kuala Lumpur (2002)
Contribution/service : Judging Panel for IKM Design
Competition held at IKM, Jasin, Melaka
(26-27 October 2002)
26) The University of Science of Malaysia, Changkat Minden, Penang (8 Mac, 2003)
Contribution/service : Committee to discuss on Setting up a new course
“Bachelor of Fine Arts (Industrial Design)” for Art Study
Center (Pusat Pengajian Seni) USM
27) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (May 2003
– April 2004)
Contribution/service : Chairman
28) Sek. Men . Seri Perling, Taman Perling, Johor
Contribution/service : Talks on “ Industrial Design Education and Prospect” in
conjunction with Johor School Science Week (22 April,
3003)
29) The University of Science of Malaysia, Changkat Minden, Penang (17 July, 2003)
Contribution/service : Committee to discuss on Setting up a new course
“Bachelor of Fine Arts (Industrial Design)” for Art Study
Center (Pusat Pengajian Seni) USM
30) Bahagian Kemahiran MARA, Kuala Lumpur (2003)
Contribution/service : Judging Panel for IKM Design & Innovation
Competition held at Malaysian Institute of Aviation
Technology (MIAT), Sepang, Selangor
(4-5 October 2003)
31) Persidangan Kebangsaan Pengetu-Pengetua Sekolah Malaysia Johor Bahru (2004)
Contribution/service : Forum Panel Members - Education Form “ Guru
Berkualiti Pemangkin Kegemilangan” organized by
Persidangan Kebangsaan Pengetu-Pengetua Sekolah
Malaysia Johor Bahru, at Islamic Center, Johor bahru,
Johor ( 26 June 2004)
32) Universiti Teknologi Tun Husien Onn, Batu Pahat (4th April 2007)
Contribution/Service : Talks on “The Role of Patent in Design” in Conjunction
Of Faculy of Engineering Invention Day (Hari Reka
Cipta
33) Kolej Perdana, Universiti Teknologi Malaysia (19th May 2007)
Contribution/service : Talks on “ Industrial Design – Education & Prospects” for
Secondary Schools in conjunction with Kolej Perdana’s
Open Day.
15.3 Sports
UTM’ Sports Club : Member (1986 – present)
Hockey : Represent Department and Faculty (1986 – 1987, 1989)
Shooting : Represent Regiment 502 (TA) in Rifle M16 Falling Plate
Competition (1987)
: Represent Regiment 502 (TA) in GPMG Group Shooting (1987)
: UTM in Pistol Shooting Competition held at UUM (1996)
: Represent ROTU, UTM in Pistol Shooting Competition held at
UPM (1996)
: Represent 1st Battalion in Rifle M16 Falling Plate Competition
(1998)
: Represent 2nd Battalion in Rifle M16 Falling Plate Competition
(1999)
: Represent 2nd Battalion in Pistol Falling Plate Competition
(1999)
: Represent Regiment 501 (TA) in Rifle M16 Falling Plate
Competition (2000)
: Represent Regiment 501 (TA) in Pistol Falling Plate Competition
held in Kuantan (2001)
: Represent Regiment 501 (TA) in Rifle M16 Falling Plate
Competition in Kuantan (2001)
: Represent Mechanical Engineering Faculty in Rifle M16 Falling
Plate Competition at UTM’s Close Shooting Competition at
PULADA, Ulu Tiram, Johor (2003)
: Represent Mechanical Engineering Faculty in “Campus Run”
(veteran category) in conjunction with UTM’s Family Day (2003)
: Represent Mechanical Engineering Faculty in Novelty Pistol
Competition at UTM’s Close Shooting Competition at
PULADA, Ulu Tiram, Johor (2004)
: Represent Department (Copa Team) in Bowling Competition at
Skudai Parade (2004)
c) Archery : Member - Archery Club, UTM (1997 – Present)
15.4 General Contributions
1. Official Neck Tie design for University Technology Malaysia (1988)
2. FME Manual and FME Bulletin Cover Design (1987, 1988, 1989, 1990, 1991)
3. Design and Fabrication of a FME’s sign board at Block H, UTM, Jalan Gurney (1987)
4. Brochure’s Design for FME Degree and Diploma Course (1990)
5. Brochure’s Design for FME/SPACE Degree and Diploma Course (1996)
6. Brochure’s Design Bachelor of Science Industrial Design, FME (1997)
7. Participation in Technological Innovation Exhibition (ITEX’96) at MBJB hall, Johor Bahru (1996)
8. Judging Panel for Technological Design Competition Organized by PETERA (1998)
9. Interior Design for Proposed “FME’s Example Lecture Room”, FME (1998)
10. Participation in Mechanical Engineering Faculty’s Exhibition held at UTM’s Administration Building Foyer (1998)
11. Preparation of Teaching Materials for SMJ 2513 ( 1st Stage – Syllabus and Scheduling) (1998)
12. Preparation of Teaching Materials for SMJ 2513 (2nd Stage – Subject Content) (1999)
13. Preparation of Working Paper for SRI degree course recognition from JPA (1999)
14. Participation in INATEX 99 exhibition (1999)
15. Facalitator for Design Workshop Rakan Reka Cipta Johor (1999)
16. Head of Judging Panel for Design Competition in conjenction with Hari Inovasi 99 Organized by Student Union UTM (1999)
17. Participation in "Pasar Seni" Exhibition, Organiser by JETRO, Johor Bahru, Johor (1999)
18. Participation in Science & Technology Week Exhibition Johor , Organiser by Ministry of Science and Environment Johor and UTM (1999)
19. Participation in R&D Exhibition in conjunction with Prime Minister's Visit to UTM, Organiser by Research Management Center UTM. (1999)
20. Chairman for PSM (Projek Sarjana Muda) Seminar (March, 1999)
21. Chairman for ATMA's PSM Seminar (March,1999)
22. Chairman for PSM (Projek Sarjana Muda) Seminar (April, 2000)
23. Chairman for PSM/SPACE Kulim Hi-Tech Seminar (May, 2000)
24. Chairman for FME Colloquium (17/7/2000, 13/9/200)
25. Chairman for PSM (Projek Sarjana Muda) Seminar (Nov, 2000)
26. Interviewer for B.Sc Industrial Design Candidates (new intake) (1997 - present)
27. Participant and talks for Markas Latihan Tentera Darat TQM presentation and competition. (6th October 2000)
28. Organising Seminar on “RS Component” for FME’s Staff and Students (11th July 2001)
29. Organising Seminar on “RS Component” for FME’s Staff and Students (9th August 2002)
30. Participate in “Johor International Kite Festival” Pasir Gudang (April 2002)
31. Participate in exhibition undertaken by Kolej Siswa Desa Skudai at Teluk Intan, Perak (Mei 2002)
32. Participate in exhibition for “Program Operasi Khidmat Rakan Masyarakat dan Pendidikan undertaken by Persatuan Pengurusan Teknologi, UTM (October 2002)
33. Participate in Industrial Design Road Show at Sokolah Menengah Taman Universiti in conjunction with the school “Co-Curriculum Day”(28 June 2003)
34. Participate in UTM’s Courses Promotional Show and Talk at Sokolah Menengah Teknik Perdagangan Johor Bahru, Johor. (10th April 2004)
35. Participate in Industrial Design Road Show at Seminar Hall, FME (21-23 July 2004)
36. Design of a Giant Hibiscus Balloon and Sculpture in conjunction with the 48th “National Day” Month Celebration in UTM (2005)
16. HONOURS AND AWARDS
1) Dean’s List Award (1980/81)
Department of Industrial Design, School of Art & Design
MARA Institute of Technology, Shah Alam, Selangor
Awarding Body : MARA Institute of Technology, Shah Alam, Selangor
2) Dean’s List Award (1982/83)
Department of Industrial Design, School of Art & Design
MARA Institute of Technology, shah Alam, Selangor
Awarding Body : MARA Institute of Technology, Shah Alam, Selangor
3) Best Student Award (1983)
School of Art & Design, MARA Institute of Technology, Shah Alam, Selangor
Awarding Body : Federated Malaysian Manufacturers (FMM) and MARA
Institute of Technology
4) Best Student Award (1983)
Department of Industrial design, School of Art & Design, MARA Institute of
Technology, Shah Alam
Awarding Body : Selangor Pewter Malaysia BHD and MARA Institute of
Technology
5) Civil Service Department Scholarship Award for Master’s Degree (Skim Latihan
Akademik Bumiputra- SLAB) (1984)
Awarding Body : Civil Service Department
6) Best Student Award (1986)
Master Degree Course (Master of Arts with Distinction), Industrial Design
Department, Manchester Polytechnic, Manchester, United Kingdom
Awarding Body : Manchester Polytechnic, Manchester, United Kingdom
7) First Prize for Gate Design Competition (1982) for Perbadanan Kemajuan Pertanian
Selangor (PKPS)
Awarding Body : Perbadanan Kemajuan Pertanian Selangor (PKPS)
8) Civil Service Department Scholarship Award for Doctrate’s Degree (Skim Latihan
Akademik Bumiputra- SLAB) (1991)
Awarding Body : Civil Service Department
9) Research Award (1997) (Group Category) University Technology Malaysia
Awarding Body : University Technology Malaysia.
10) Universiti Teknologi Malaysia Merit Award 2000
Awarding Body : University Technology Malaysia.
11) Pingat Ibrahim Sultan (P.I.S. II) (2002)
Awarding Body : The Sultan of Johor.
12) Pingat Pita Semat (Clasp) (2002)
Awarding Body : The Ministry of Defence
13) Pingat Kebaktian (P.K.) (2003)
Awarding Body : The Federal Government of Malaysia.
14) Darjah Ahli Mahkota Perak (A.M.P.) (2003)
Awarding Body : The Sultan of Perak
15) Anugerah Khidmat Bakti (Long Service Award) (2004)
Awarding Body : Universiti Teknologi Malaysia.
16) Kesatria Mangku Negara (K.M.N.) (2005)
Awarding Body : The Federal Government of Malaysia.
17) Universiti Teknologi Malaysia Excellence Service Award 2006
Awarding Body : University Technology Malaysia.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.