Cisco WAN Quick Start



CCNP Switching Exam Certification Guide

ISBN: 1-58720-000-7

Cisco Press

Errata

Page 22 – The second bulleted item under the heading ‘Layer 4 Switching’ should read, “Layer 4 protocols

types (UDP or TCP, for example) in packet headers are examined”.

Page 78 – The first sentence on the page should read, “The 100BaseFX ports use two-strand multimode

fiber (MMF) with SC connectors to provide connectivity.

Page 122 - The ‘NOTE’ section should read, “Switch(enable) set vtp domain mayberry mode server

passwd opie9 v2 enable”.

Page 173 – The command under the second bulleted heading ‘STP Configuration on an IOS-based Switch’

should read, “Switch(Config)# spanning-tree vlan-id”.

The next sentence below the command above should read, “To view the status of STP on either

a CLI- or IOS-based switch, use the following commands, respectively:

Switch (enable) show spantree [vlan-id]

Switch# show spanning-tree [vlan vlan-id]

Page 176-177 – Regarding Figure 5-8 and 5-9, the blocking links should be the ones between Catalyst D

and Catalyst C, B and D, D and F, D and E, F and G.

Page 215 – Regarding Figure 6-4, the caption under Catalyst C should read,

“ELAN 1:LEC 1

ELAN 2:LEC 2

LES/BUS 2”

Page 318 – The last sentence on the page should read, “To reinstate the default standby priority value, enter

the no standby group priority command”.

Page 349 – Regarding Table 10-4, in the ‘Type’ row, delete the last line that reads, “0 x 12 = Version 1

Membership Report”.

Page 365 – Question #7 should read, “What does a host send to the all-routers group address of 224.0.0.2 to

join a group?”

Page 449 – Regarding Table 13-5, Step 3 should read, “Determine whether there is a cross-connect (for

example, be sure a straight-through cable is being used between a station and the hub.)”

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download