TABLE OF CONTENTS
[pic]
Installing and Configuring
VMware Player
for IMPAX 6.5
Standalone Stations
When printed, this is NOT a controlled document
Statement of Manufacturer’s Responsibility
The manufacturer, installer or importer will be responsible for the safety, reliability, and performance of the equipment only if:
Installation, modifications, adjustments, changes, or repairs are performed by certified service personnel.
The electrical installation of the site in which the equipment is used is according to an applicable safety standard (UL, CSA, IDE/VDE).
The equipment is used according to the instructions provided in the appropriate User, Application, and Service Documentation Sets
Limitation of Remedies and Damages
In no event will Agfa-Gevaert N.V., its parents, subsidiaries or any of the licensors, directors, officers, employees or affiliates of any of the foregoing be liable to you for any consequential, incidental, indirect, or special damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information and the like), whether foreseeable or unforeseeable, arising out of the use or inability to use the hardware, software, or accompanying written materials, regardless of the basis of the claim and even if Agfa-Gevaert N.V. has been advised of the possibility of such damage.
Trademarks
Agfa™ and the Agfa-Rhombus are trademarks of Agfa-Gevaert AG, Germany. IMPAX is a trademark of Agfa-Gevaert N.V., Belgium. Other product and company names are trademarks or registered trademarks of their respective holders.
MS DOS®, MS Windows®, and Windows NT® are registered trademarks of Microsoft Corporation
Oracle® is a registered trademark of Oracle Corporation
Sun® is a registered trademark of Sun Microsystems Inc.
Solaris® is a registered trademark of Sun Microsystems Inc.
Lumiscan® is a registered trademark of Lumisys
UNIX® is a registered trademark of AT&T
Copyright( Agfa 2010
This document or any part thereof may not be copied or reproduced in any form without express permission of Agfa Corporation.
Table of Contents
1. General Information 4
1.1. Scope 4
1.2. Intended Use 4
1.3. Who Should Perform This Procedure 4
1.4. Related Documents 4
1.5. Affected IMPAX Versions 4
1.6. Software Requirements 5
1.7. Where to Obtain Software 5
1.8. Tested In 5
2. Manual VMware Player Installation and configuration 6
2.1. Configuration 9
2.2. Base Disk size 12
2.3. Network Settings 13
2.4. Creating virtual disks 14
3. Automated VMware Player Installation and configuration via Altiris 21
4. Removal of Audio & floppy drive 26
5. Installing Windows 2008 into the virtual machine 28
General Information
1 Scope
This document provides information on the following:
1. Manual installation and configuration of VMware Player V3.0
2. Manual creation and addition of Virtual VM disks
3. Altiris Automated installation of VMware Player 3.0
4. Altiris automation of the creation of the virtual VM disks
2 Intended Use
This document will serve as the basis for staging IMPAX 6.5 Standalone servers with Altiris being the choice to do so.
3 Who Should Perform This Procedure
• EMEA and NAFTA Staging
• Qualified (service)
4 Related Documents
• IMPAX 6.5 Standalone Installation and Configuration Guide
• Altiris build procedures created from the official knowledge base documents
5 Affected IMPAX Versions
IMPAX 6.5 and later
6 Software Requirements
• VMware-player-3.0.1-227600.exe
• IMPAX 6.5
• Windows 7
• Windows 2008
7 Where to Obtain Software
• Contact your Global Support Center
• Do not contact IMPAX Technology Inc. for software
8 Tested In
Global Staging centers
Manual VMware Player Installation and configuration
Download VMware player V3.0 at to obtain the executable VMware-player-3.0.1-227600.exe then run said executable.
[pic]
Next then Next
[pic]
[pic]
Next then Next, Note desktop icon will be removed by Altiris after VMware has been configured.
[pic]
[pic]
Restart when the installation is complete.
[pic]
1 Configuration
[pic]
[pic]
[pic]
[pic]
[pic]
Keep the default Location for the configurations files
[pic]
2 Base Disk size
[pic]
[pic]
3 Network Settings
[pic]
[pic]
4 Creating virtual disks
A prerequisite to creating the virtual disks is that all disk creation on the hosts system must be completed as follows:-
[pic]
VM-DATABASE = 30GB
VM-DATABASELOGS = 90GB
VM-IMG_CACHE = Remaining
Start the VMware utility:- Start – Programs – VMware – VMware Player highlight the “IMPAX AS300 V6.5” virtual machine and select “Edit Virtual Machine”
[pic]
[pic]
[pic]
[pic]
[pic]
Again make sure that the drives have already been configured by the hosts system and make a note of the sizes that will be used to build the virtual disks.
A virtual disk will be created for each of the disks with the maximum size of the disk pre-allocated for increased performance.
[pic]
Make sure that the “Allocate all disk space now” is selected and enter the total size of the disk to be created. In this example we shall be creating all the E: drive into one virtual disk file.
[pic]
[pic]
[pic]
[pic]
[pic]
[pic]
Complete the virtual disk creations for both the DATABASELOGS and for the IMG_CACHE by duplication the above process.
When all of the virtual disks have been created select OK then virtual machine will be ready for Altiris to install the Windows 2008 OS.
[pic]
Automated VMware Player Installation and configuration via Altiris
An Altiris job has been created to automate most of the manual VMware install and configuration. At present the only manual configuration will be to add the virtual disks created by Altiris to the virtual machine.
[pic]
This job will:-
• Install VMware Player 3.0
• Create the virtual machine by copying over the pre-captured configuration files
• Create the entire virtual disks by the use of “vmware-vdiskmanager”
This job is run as part of the initial Win 7 host configuration.
[pic]
When the first stage completes carry out the following manual VMware configuration to add the virtual disks to the new virtual machine.
Start the VMware utility:- Start – Programs – VMware – VMware Player highlight the “IMPAX AS300 V6.5” virtual machine and select “Edit Virtual Machine”
[pic]
Select ‘Add’ and the ‘Hard Disk” should already be high-lighted.
[pic]
[pic]
Select ‘Next’ then “Use an existing virtual disk”
Select ‘Next’
[pic]
Navigate to the virtual disk you wish to add. This example shows the virtual disk created in the DATABASE directory. Select the “E:\IMPAX-AS300-V6.5-0.vmdk”
[pic]
Once selected click on ‘Finish’
[pic]
If after selecting ‘Finish’ you are asked to convert this VM partition select ‘Convert” then OK.
[pic]
Complete the virtual disk additions for both the DATABASELOGS and for the IMG_CACHE by duplication the above process.
When all of the virtual disks have been created select OK then virtual machine will be ready for Altiris to install the Windows 2008 OS.
[pic]
Removal of Audio & floppy drive
So not to distract the user when viewing images with possible warnings from the Admin tools, it would be advantageous to remove the audio card from the virtual machine. The floppy too will be removed for system resource management improvement.
Start the VMware utility:- Start – Programs – VMware – VMware Player highlight the “IMPAX AS300 V6.5” virtual machine and select “Edit Virtual Machine”
[pic]
Select the “Floppy’ then ‘Remove”
[pic]
Do the same process for the Audio card then click on OK.
[pic]
[pic]
Installing Windows 2008 into the virtual machine
The virtual machine is now ready for Altiris to deploy the Windows 2008 image.
The procedure will be covered in depth by the Altiris Standalone installation document but to initiate the Windows image download select “Play virtual Machine form the VMware gui
[pic]
As there is no Operation system the virtual disk will PXE boot and find the Altiris server PXE boot menu. Select WinPE Managed
[pic]
The virtual machine will now PXE boot to WinPE
[pic]
[pic]
The new Virtual Machine will be seen by Altiris and will be designated a VMware computer
The Windows 2008 image from the 6.5 client standalone job can now be deployed.
[pic]
[pic]
[pic]
-----------------------
After the installation double click on the desktop icon then agree to the License Agreement.
In the Welcome to VMware Player select “Create a New Virtual Machine”
Make sure that the “I will install the Operating System Later” is selected as the OS will be installed later by Altiris.
Make sure that “Microsoft Windows” is selected then select “Windows Server 2008” from the drop down menu. Select an appropriate Virtual machine name. In this example “IMPAX AS300 V6.5” was used. Keep the default location for the configuration files.
Adjust the Maximum Disk size to 75GB. This will allow for the later configuration by Altiris the disks C:\ 40GB, V:\10 GB L:\1GB and R:\20GB. Click on “Customize Hardware” to configure the network settings
As default the network is configured as NAT. Select “Bridged” and “Replicate Physical Network connection state”. Click on Finish
In the Virtual Machine settings menu select “Add” then “Hard Disk” should be highlighted then select “Next”
Select “Create a new virtual disk”, “Next” then confirm that the recommended “SCSI” is selected then click “Next”
Direct the default file name to the E:\ drive by adding it to the beginning of the file. Click on finish to begin the virtual disk build.
Once the virtual disk has been created it will be seen in the virtual machine setting menu and two files will be seen in the E:\ partition
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- table of common cardiac medications
- mbti table of personality types
- time table of examination 2019
- complete table of values calculator
- table of values equation calculator
- table of values generator
- graph table of values calculator
- linear equation table of values
- table of standard scores and percentiles
- table of derivatives pdf
- table of integrals exponential functions
- table of exponential integrals