The 6.3L W12 FSI Engine - Audi Klub
Self-Study Program 920113
The 6.3L W12 FSI Engine
Audi of America, LLC Service Training Printed in U.S.A. Printed 6/2011 Course Number 920113
?2011 Audi of America, LLC
All rights reserved. Information contained in this manual is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, LLC., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
All requests for permission to copy and redistribute information should be referred to Audi of America, LLC.
Always check Technical Bulletins and the latest electronic service repair literature for information that may supersede any information included in this booklet.
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6.3L W12 FSI Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cylinder Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Crankshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pistons and Connecting Rods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chain Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Crankcase Breather. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Fine Oil Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Cylinder Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Oil Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Oil Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Air Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Intake Air Flow System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Secondary Air System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Vacuum Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Coolant Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Fuel Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 High Pressure Injectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Engine Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Exhaust Flaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Special Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Knowledge Assessment . . . . . . . . . . . . . . . . . . . . . . . . . . .39
i
The Self-Study Program provides introductory information regarding the design and function of new models, automotive components, or technologies. The Self-Study Program is not a Repair Manual! All values given are intended as a guideline only. For maintenance and repair work, always refer to current technical literature.
ii
Reference
Note
!
Introduction
A 12-cylinder engine is the pinnacle of engine design and a hallmark of luxury class vehicles. Twelve-cylinder engines have been used in the Audi A8 model line since 2001.
Over time, Audi's engineers have thoroughly revised the W12, increasing its displacement to 6.3 liters and equipping it with direct fuel injection for greater power and efficiency.
The 6.3L W12 FSI engine gives the 2011 A8L sports car performance: zero to 60 in just under 4.9 seconds and an electronically limited top speed of 155 mph (250 km/h).
The engine is exceptionally smooth running, and only at high engine loads and speeds do the car's occupants sense any of this supreme power at work.
The high fuel economy of the 6.3L W12 FSI engine, when compared with its competitors, is mainly the result of technologies from Audi's modular efficiency platform, which is used throughout the A8 model line.
490_002c 1
6.3L W12 FSI Engine
Overview
? 12-cylinder gasoline engine with four rows of three cylinders arranged in a W configuration
? More compact dimensions than a comparable V8 engine ? Length: 19.6 in (500 mm) ? Width: 27.5 in (700 mm) ? Height: 27.5 in (700 mm)
? Two cylinder heads with four valves per cylinder and two camshafts per bank with hydraulic camshaft adjusters
? Engine is controlled by a multi-element chain drive (optimized for low friction)
? FSI direct injection with twin high-pressure fuel pumps, twin fuel rails and six-port high pressure injectors
? Recuperation system for energy recovery during deceleration phases
490_004
Reference For further information about W12 engine design, refer to Self-Study Program 921403, 6.0L W12 Engine in the Audi A8L.
2
Specifications
536.4 hp (400 kW)
516.2 lb ft (700 Nm)
482.7 hp (360 kW)
479.4 lb ft (650 Nm)
429.1 hp (320 kW)
Power in hp (kW) Torque in lb ft (Nm)
375.4 hp (280 kW) 321.8 hp (240 kW)
442.5 lb ft (600 Nm) 405.6 lb ft (550 Nm) 368.7 lb ft (500 Nm)
268.2 hp (200 kW)
331.9 lb ft (450 Nm)
214.5 hp (160 kW)
295.0 lb ft (400 Nm)
160.9 hp (120 kW)
258.1 lb ft (350 Nm)
hp (kW)
lb ft (Nm)
53.6 hp (40 kW)
184.3 lb ft (250 Nm)
0
1000 2000
3000
4000
5000 6000 7000
490_001
Engine Code Engine type
CEJA
12-cylinder W type engine with a V angle of 15? and a bank angle of 72?
Displacement
384.3 cu in (6299 cc)
Maximum power
493.4 hp (368 kW) @ 6200 rpm
Maximum torque
460.9 lb ft (625 Nm) @ 4750 rpm
Valves per cylinder
4
Bore
3.38 in (86.0 mm)
Stroke
3.55 in (90.4 mm)
Compression ratio
11.8 : 1
Firing order
1-7-5-11-3-9-6-12-2-8-4-10
Engine weight
544.5 lb (247 kg)
Engine management
Bosch MED 17.1.6
Fuel grade
91 AKI
Exhaust emission standard ULEV II
Exhaust gas aftertreatment
Four air-gap insulated manifold CAT modules, each with a closecoupled ceramic catalytic converter and twin oxygen sensors
3
Components
Cylinder Block
Compared with the 6.0L W12 engine, cylinder bore has been enlarged from 3.30 in (84.0 mm) to 3.38 in (86.0 mm).
The cylinder block is cast from a lightweight, high strength aluminum-silicon alloy. The bottom section has a cast iron crossmember with embedded main bearing pedestals.
Front of engine
267_098
Cylinder block
Integrally cast main bearing pedestals for crankcase bearings
Bearing crossmember
Oil pan top section
Oil pan bottom section
490_005
4
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- the 6 3l w12 fsi engine audi klub
- 6 0l w12 engine in the audi a8l audi klub polska
- bentley motors limited the new cheshire cw1 3pl
- continental gt and continental gt convertible w12
- 2006 a8 w12 product information audiworld
- 983036 comparison between v12 and w12 f1 engines
- engine management for the phaeton w12 engine volkspage
- concept w engine the
- design and function volkspage
Related searches
- 6.0 w12 engine
- 6 0 w12 engine
- what are the 6 characteristics of bureaucracy
- list the 6 characteristics of life
- what are the 6 characteristics of life
- what are the 6 basic academic skills
- the 6 characteristics of life
- the 6 elements of plot
- find the 6 trig functions calculator
- the 6 basic nutrients
- the 6 text structures
- what are the 6 trigonometric function