Home - Open Air Outdoor Cabinetry
[pic]
[SECTION 12 34 00 - MANUFACTURED PLASTIC CABINETS]
(Replacement Product for Section 06 41 00 - Architectural Wood Casework)
Product Guide Specification was revised on 5/16/2018
DeSavino & Sons Plastic Cabinetry can be used outdoors and in other locations requiring hygienic surfaces, durability, and resistance to water.
SPECIFICATION COORDINATION: This document is available in word processing format at . Turn on HIDDEN TEXT to view or print specifier notes. Edit to include only requirements pertinent to the Specific Project.
DRAWING COORDINATION: Show elevation and plan views of cabinets, height of knobs or pulls, cabinet dimensions, and mounting details.
TECHNICAL ASSISTANCE: DeSavino & Sons, Phone: +1 (570) 383-3988, email: contact@, website: .
GENERAL
1. SUMMARY
Coordinate following with terminology used on Drawings.
A.
B. Edit related requirements according to project requirements and coordinate with other sections. Related sections for applications of Manufactured Plastic Cabinets
1. Section 12 34 16 - Manufactured Solid-Plastic Casework
2. Section 12 35 00 - Specialty Casework
3. Section 12 35 25 - Hospitality Casework
4. Section 12.35.30.13 - Kitchen Casework
5. Section 12 35 30.23 - Bathroom Casework
6. Section 12 35 30.43 - Dormitory Casework
7. Section 12 35 33 - Utility Room Casework
8. Section 12 25 36 - Mailroom Casework
9. Section 12 35 39 - Commercial Kitchen Casework
10. Section 12 35 53.23 - Solid Plastic Casework
11. Section 12 35 70 - Healthcare Casework
12. Section 12 35 70.13 - Hospital Casework
13. Section 12 35 70.16 - Nurse Station Casework
14. Section 12 35 70.19 - Exam Room Casework
15. Section 12 35 70.74 - Dental Casework
16. Section 12 35 83 - Performing Arts Casework
C. Related Requirements:
1. Sustainable Design Requirements: Section 01 81 13 - Sustainable Construction Requirements
2. Maintenance: Section 06 01 60 - Maintenance of Plastic Fabrications
3. Sealants: Section 07 92 00 - Joint Sealants
4. Color of Casework Finish: Section 09 06 00 - Schedule Of Finishes
5. Resilient Base: Section 09 65 13 - Resilient Base and Accessories
6. Backing Plates for Wall Mounted Casework: Section 09 22 16 - Non-Structural Metal Framing
7. Countertop Construction and Materials and Items Installed in Countertops: Section 12 36 00 - Countertops
8. Hardware, Pulls, Locks and Keys: Section 06 41 93 - Cabinet and Drawer Hardware
DeSavino will be glad to supply countertops for projects within reasonable shipping distance from our factory.
2.
A. ASTM International, Inc.
1. ASTM A153 – Zinc Coating (Hot-Dip) on Iron and Steel Hardware.
2. ASTM D570 – Water Absorption of Plastics.
3. ASTM D638 – Tensile Properties of Plastics.
4. ASTM D648 – Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position.
5. ASTM D746 – Brittleness Temperature of Plastics and Elastomers by Impact.
6. ASTM D2240 – Rubber Property – Durometer Hardness.
B. UL LLC
1. UL 94 – Flammability of Plastic Materials for Parts in Devices and Appliances
3. SUBMITTALS
A. Product Data: Submit: Cabinet manufacturer’s product data and installation instructions.
B. Shop Drawings: Indicate sizes, materials, styles, colors, and hardware.
C. Samples: Submit [two] [________] samples each color of cabinet. Samples shall be 4 x 4 inches minimum.
4. DELIVERY, STORAGE, AND HANDLING
A. Support unassembled components on continuous or closely-spaced flat surfaces to protect against sagging.
B. Protect against damage.
PRODUCTS
1. MANUFACTURER
A. Provide Plastic Cabinetry by DeSavino & Sons; phone - +1 570-383-3988, url - , email - contact@.
B. Substitutions: None allowed.
Select above or below. Selecting below will require architect to spend additional time reviewing substitution request.
2.
We use high quality HDPE that is specifically formulated for exterior and wet environments. Contact DeSavino to discuss your project’s special requirements.
A.
1. Water Absorption: 0.01 percent maximum, ASTM D570.
2. Tensile Strength (Yield): 3600 psi minimum, ASTM D638.
3. Durometer Hardness: Shore D 65 minimum, ASTM D2240.
4. Temperature Serviceability:
a. Upper Limit: 163 F deflection temperature at 66 psi, ASTM D648.
b. Lower Limit: -100 F brittleness temperature, ASTM D746.
5. Slow Burning: Passes UL 94, Classification HB.
6. Food Contact: Complies with FDA and USDA requirements for food contact.
7. UV Resistance: Stabilized against excessive polymer degradation and color change.
Anti-microbial treated HDPE is optional and at additional cost and lead time. Three stock colors are available for anti-microbial treated HDPE. Custom colors can be ordered with a minimum requirement of sheets to fulfill an order. Contact DeSavino and Sons for information.
8.
B. Thickness: 3/4-inch thick.
Chestnut and Moss Grey may require extended lead times. Custom colors can be ordered with a minimum requirement of sheets to fulfill an order. Contact DeSavino and Sons for information.
C. Integral Color (Non-antimicrobial): [Black] [Chestnut] [Dolphin Grey] [Forest Green] [Glacier Grey] [Moss Grey] [Sandshade] [Seafoam] [Tan] [White-White].] [As shown on Room Finish Schedule.]]
D. Surface Texture: Matte.
3. HARDWARE
A. Hinges: Jako HBT Bi-dimensional hydraulic soft stop hinge, type 304 stainless steel.
B. Drawer Slides: Dynaslide, Type 304 stainless steel, ball bearing, full extension, load rated for 100 lbs. at 18 inches, release mechanism for disconnect, ball retainer detent for reinstall, and hold-in detent.
C. Adjustable Shelf Supports: Plastic with 5-mm diameter pin.
D. Base Cabinet Supports:
1. Adjustable Legs: Plastic legs that adjust from four to six inches in height. Legs shall have mounting plate for toe kick.
2. Casters on Mobile Cabinets: Type 304 stainless steel with swiveling 2.5-inch diameter resilient wheels. [Casters at front corners of cabinets shall have foot-operated brakes.]
E. Fasteners for Assembly of Cabinets:
1. Barrel and Bolt fasteners: Type 304 stainless steel.
2. Exposed heads shall be countersunk.
Fasteners for installation not provided by DeSavino and Sons.
F.
1. Types: Dependent on substraight and material used for blocking.
4. FABRICATIONS
A. General:
1. Fabricate from HDPE sheets.
2. Assemble with dado and rabbet constructions.
3. Secure joints with fasteners.
4. Provide backs to cabinets.
5. Exposed Edges: Eased
6. Cabinets shall be free of damage and blemishes.
Removable toe kick can be specified in exterior locations to allow cleaning.
B.
1. Toe Kick: [Removable.] [Non-removable.] Provide [only on front] [On all sides] of cabinets.
2. Shelves: Provide holes in sides of cabinets for adjustable shelf supports. Provide shelf per base cabinet and two per wall cabinet [unless otherwise shown on Drawings].
C. Door Faces:[Cape Cod - V-Groove with Narrow Slats] [Captiva Shaker - V-Groove Shaker with Lines] [Country Living - V-Groove with Wide Slats] [Cozumel - Arched Raised Panel] [Riviera Maya - Square Raised Panel] [San Francisco - Cathedral Raised Panel] [Sanibel Shaker - V-Groove Shaker] [Simple - Flat] [(Premium) Bridgewater - Inset Shaker with Lines] [(Premium) Clearwater - Clear Panel] [(Premium) Springfield - Inset Shaker] [As shown on Drawings.]
Drawings can be used instead of text-based descriptions of faces and edges.
[pic][pic][pic][pic][pic][pic][pic][pic]
[pic][pic][pic]
D. Drawers Fronts: Plain and flat faces.
E. Edges for [Doors] [Drawer Fronts] [and] [Finished Side [and Back} Panels: [Square] [1/8-inch roundover] [1/4 inch chamfer] [3/8-inch cove.] [Small ogee] [Large ogee] [Wavy].
[pic][pic][pic][pic][pic][pic][pic]
F. Finished Side [and Back] Panels: Provide at exposed sides of cabinets. [Standard door styles only.]
G. Closures: Provide matching material to close blank areas [and as shown on Drawings].
EXECUTION
1. EXAMINATION
A. Verify that wall has adequate blocking to support wall-mounted units.
B. Do not begin cabinet installation before work that will be covered by cabinets is complete.
2. INSTALLATION
A. Install in accordance with manufacturer’s instructions.
B. Install plumb, level, and square with adjacent units butting tightly.
C. Secure cabinets to adjacent cabinets and/or to adjacent construction.
D. Scribe edges to fit closely to walls.
E. Adjust hardware for smooth operation.
F. Protect surfaces against damage until final closeout.
3. CLOSE-OUT
A. Immediately before substantial completion, remove protective materials, and clean surfaces in accordance with manufacturer’s instructions.
END OF SECTION
© 2015 by DeSavino & Sons. Qualified design and construction professionals may copy for preparation of construction specifications or purchase orders. Issued September 18, 2015; contact DeSavino & Sons for current information.
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related searches
- high end cabinetry companies
- sollid cabinetry dealers
- nursing home open house ideas
- air force microsoft home use program
- urban air open hours
- open air mri alexandria la
- home depot air purifiers honeywell
- air purifiers for home walmart
- home air purifiers reviews
- home air cleaners
- air purifiers for home 2020
- best air purifiers for home 2019