Color Wireless Weather Station with 3 Days Weather Forecast



Color Wireless Weather Station with 3 Days Weather ForecastDefault settingPower on and LCD display for 2S. Monitor goes to 3 minutes RF receiving after BI sound. Default display：Time：0：00 24HDate：2017.1.1 SONAL1：6:00AL2：7:00Barometer：1012 hpaWeather forecast: semi-sunnyKeys ControllingMODE：In standard mode, press it to check AL1 and press again to check AL2. In standard mode or check alarm, press and hold it to time and alarm setting.UP：In standard mode, press it to check alert temperature. press and hold it to alert temperature setting.In setting mode, press it to add one step and long press to add 8steps/second.DOWN：In standard mode, press it to switch temperature unit. In setting mode, press it to add by one step and long press to add by 8steps/second. In standard mode, press and hold it to RCC receiving. CH: In standard mode, press it to switch channel. Press and hold it to RF receiving.MAX/MIN: In standard mode, press it to check Max/Min value of temperature and humidity. Press and hold it to clear Max/Min value of temperature and humidityHISTORY: In standard mode, press it to check barometer history. Press and hold it to set height and weather.SNOOZE/LIGHT：In standard mode，press it to turn on backlight for 10S. When alarm, press it to snooze function, Time modeIn standard mode, Press MODE more than 2S to enter time setting ,then setting item twinkling at 1HZ frequency.Setting order: Year → Month → Day →Time zone → Language→ 12 / 24HR → Hour → Minute → ExitTime Zone is ±12and default is 0.Press MODE or no key handling for 20s, will exit and save the setting.Press UP once and ahead at one step; press and hold, go ahead at an 8 step / second speed.Press DOWN once and back at one step, press and hold, go back at an 8 steps / second speed.Press UP to set language and order is GER→FRE→ITA→DUT→SPA→DAN→ENG→GER. Default is GER.When setting hour or minute, second will be clear.Alarm setAt standard mode, press MODE once to AL1 and press again to AL2. Then long press MODE to set AL1 or AL2. Press MODE again and setting order is alarm time choosing M-F (Monday to Friday)or S-S(Saturday to Sunday) →hour→minute→exitPress UP once and ahead at one step; press and hold, setting item goes ahead at an 8 step / second speed.Press DOWN once and back at one step, press and hold, setting item goes back at an 8 step / second speed.Press MODE or no key handling for 20s, will exit and save the settingWhen check AL1 or AL2, press UP to open or close alarm. If no any handling for 5S, monitor will go to time display.Alarm modeAlarm time: 2 minutesAlarm sound0-10S：BI once/second10-20S: BI twice/second20-30S： BI four times/second After 30S，continuous BI soundWhen alarm, press SNOOZE/LIGHT once to 5 minutes snooze function.No matter alarm or snooze, press any key to stop alarm or snooze except SNOOZE/LIGHT.Indoor temperatureMeasure range= 0℃ to 50℃Accuracy ±1℃ When above 50C, temperature should display “HH.HWhen below 0C, the temperature should display “LL.L”Indoor HumidityOperating range = 20% to 95%Accuracy +/- 5% RH (@25C , 30%RH to 75%RH)?Accuracy +/- 8% RH (@25C , 20%RH to 30%RH；75%RH to 95%RH)When above 95%, temperature should display 95%.When below 20%, the temperature should display 20%.Remark: When alarm or RF receiving, temperature and humidity test stop.Outdoor TemperatureMeasure range= - 40℃ to 70℃Accuracy: ±1℃ (0C to 50C) ± 2℃ ( -20C to 0C,)± 4℃ from -40C to -20C, 50℃ to 70℃When above 70℃, temperature should display “HIWhen below-40℃ , the temperature should display “LO”Outdoor HumidityOperating range = 20% to 95%Accuracy +/- 5% RH (@25C , 30%RH to 75%RH)Accuracy +/- 8% RH (@25C , 20%RH to 30%RH；75%RH to 95%RH)When above 95%, temperature should display 95%.When below 20%, the temperature should display 20%.RF Reception ConditionsRF reception conditions：Automatically receive 3 minutes after power on or resetPress the CH key for two seconds to re-register the current channel RF dataSynchronous reception when RF reception time up to 3 minutesRF registration failure or missing code time more than 1 hour after the temperature and humidity section will flash“--.-”.After power-on, the main unit first receives the transmitter signal, when the signal synchronized, the main unit will automatically open RCC, in the process of receiving RCC, the main unit will not receive the RF signal. After the RCC is successfully received, the main unit will re-synchronize the transmitter signal.Time display through Radio ControlThis device is equipped with a receiver able to receive the time signal of the Physikalisch Technische Bundesanstalt Braun-schweig (central Germany) admissible in a 1500 km radius.Press and hold the DOWN button of the weather station, the symbol will flash radio control and within 24 hours will be displayed on the control radio time signal.Note 1: When the symbol of the blinking control radio is displayed, you cannot make any manual adjustments.Note 2: When the symbol is steady, it means that the signal ‘was properly received.Note3: The time is transmitted from the central Germany, so if we are in a country with different time than the Germany is necessary to set the time zone.Note4: Place the weather station away from equipment that generates magnetic fields such as mobile phones, televisions etc ....Note 5: When RCC receiving, press DOWN to exit receiving status. Only press SNOOZE/LIGHT once to light backlight. Other keys are no function.Note 6: If fail to receive signal that day, next receiving time is 1:00 of next day.Note7: When receiving RCC signal, alarm is ringing, RCC receiving will stop and alarm first.Note8: When receive DST signal, DST signal will show. Note9: When RCC signal displays, RCC and DST signal will be closed when reset time except language.Note10: It not in all areas of Europe may be able to receive the signal of the radio control. In this case you must set the time manually.Outdoor temperature alert settingIn standard mode, press UP once to check alert temperature.In standard mode, press and hold UP for 2S to alert temperature setting and setting item twinkling by 1HZ.Press MODE and setting order is ON/OFF→temperature upper limit → temperature lower limit → exitPress UP once and ahead at one step; press and hold, setting item goes ahead at an 8 step / second speed.Press DOWN once and back at one step, press and hold, setting item goes back at an 8 step / second speed.Press MODE or no key handling for 20s, will exit and save the settingTemperature alert range is -50℃ to 70℃. Default is OFF.Outdoor temperature alert function When temperature alert, alert icon will twinkle.If no present channel temperature alert, alert icon will twinkle but temperature will not twinkle.Temperature alert voice: BiBiBiBi/secondEach minute alarm 5SOnly temperature is not in alert range, alarm will stop. Turn off alarm：Press any key to turn off temperature alarm but temperature and alert icon will still twinkle.Only temperature is not in alert range, alarm will stop.Turn off alert function.Freezing pointWhen any channel outdoor temperature is below 3.9℃, monitor will show freezing point.Moon phaseBarometer, height and weather set In standard mode, press and hold HISTORY to set height. Set item will twinkle at 1 HZ. Then press HISTORY once and set order is height weather barometer unit exit.When setting, press UP or DOWN to set height, weather or barometer unit.Monitor will exit setting mode by press HISTORY or after no any handling for 20S.Height range is -190~2000M. Default height is 140m and barometer is 1012 hpa.When setting weather, press UP to choose, order is semi-sunny cloudy rainy stormy sunny semi-sunnyBarometer unit：Hpa或InHg. Default unit is hpa. Weather forecast5 kinds of weather forecast: sunny, semi-sunny, cloudy, rainy, stormy Default is semi-sunny.Ewetime self-calibrating forecasting provides your personal forecast of weather conditions for the next 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy -personalized for your exact location.When rainy, if temperature is below 3.9℃, monitor display snowy. Low battery iconWhen outdoor sensor sends out low battery data, monitor will show low battery icon.Care of the DeviceAvoid exposing units to extreme temperatures or severe shock.Avoid contact with any corrosive materials such as perfume, alcohol or cleaning agents.Do not subject the units to excessive force, shock, dust, temperature or humidity. Any of these conditions may shorten the life of the units.Do no tamper with any of the internal components of these units. This will invalidate the warranty and may cause damage.Damage caused by failure to comply with this instruction manual will invalidate any warranty. The manufacturer and supplier will not be held liable for any damages due to failure to comply with this instruction manual.In case of harm or damage to a person or property caused by improper handling or failure to comply with this instruction manual, the manufacturer and supplier cannot be held liable.This product is not to be used for medical purpose or for public information. Correct Usage of Batteries Do not mix standard and rechargeable batteries.Do not mix new and old batteries.When the low battery symbol appears on the display replace all batteries with new ones.Do not leave discharged batteries in the device as these may corrode and release chemicals that may damage the unit.Do not leave discharged batteries in the device as these may corrode and release chemicals that may damage the unit. ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download