Canam - Steel Deck Catalogue (Canada)
Steel Deck
A division of Canam Group
TABLE OF CONTENTS
PAGE OUR SERVICES ............................................................................. 4
NOTES ABOUT LOAD TABLES........................................................... 5
P-3615 & P-3606 DIMENSIONS & PHYSICAL PROPERTIES................................. 6 FACTORED AND SERVICE LOADS .......................................... 7
P-2436 & P-2404 DIMENSIONS & PHYSICAL PROPERTIES................................. 8 FACTORED AND SERVICE LOADS .......................................... 9
P-3615 & P-3606 COMPOSITE DIMENSIONS & PHYSICAL PROPERTIES............................... 10 FACTORED RESISTANCE OF COMPOSITE SLAB ....................... 11 WITH LIGHTWEIGHT CONCRETE.................................. 13
P-3623 COMPOSITE DIMENSIONS & PHYSICAL PROPERTIES............................... 14 FACTORED RESISTANCE OF COMPOSITE SLAB ....................... 15 WITH LIGHTWEIGHT CONCRETE.................................. 17
P-2432 COMPOSITE DIMENSIONS & PHYSICAL PROPERTIES............................... 18 FACTORED RESISTANCE OF COMPOSITE SLAB ....................... 19 WITH LIGHTWEIGHT CONCRETE.................................. 21
PAGE
P-3012 FORM DECK DIMENSIONS & PHYSICAL PROPERTIES............................... 22 MAXIMUM CONCRETE SLAB THICKNESS TABLE ..................... 23 FACTORED RESISTANCE OF CONCRETE SLAB WITH WIRE MESH ... 23
DESIGN AIDS WEB CRIPPLING ............................................................. 24 ROOF CANTILEVER .......................................................... 26 FLOOR CANTILEVER......................................................... 27 POUR STOP ................................................................... 28 CLOSURE STRIP ............................................................. 29
ACCESSORIES PLATES & SUMP PAN ..................................................... 30 NEOPRENE & METAL CLOSURES........................................ 31
DECK FEATURES VENTED DECK ................................................................ 32 ACOUSTICAL DECK .......................................................... 33
CANAM DECK CERTIFICATION FACTORY MUTUAL (FM).................................................. 34 UNDERWRITERS' LABORATORIES OF CANADA (ULC) ............. 34
DIAPHRAGM ............................................................................... 36
BUSINESS UNITS & INTERNET ADDRESSES ...................................... 37
CANAM ADDRESSES..................................................................... 38
Utility / Product
Roof Deck Floor Deck (Composite) Form Deck (Non Composite) Deck Features Vented Deck Acoustical Deck Technical Data Diaphragm Depth Coverage
P-3615
P-3606
P-2436
P-2404
P-3623
P-2432
P-3012
38 mm (1 1/2") 914 mm (36")
38 mm (1 1/2") 76 mm (3")
914 mm (36") 610 mm (24")
76 mm (3") 610 mm (24")
51 mm (2") 914 mm (36")
76 mm (3") 14 mm (9/16")
610 mm (24") 762 mm (30")
Request for technical information about our cold-formed products can be sent to: steeldeck@canam.ws
3
OUR SERVICES
For project design, bid preparation or component manufacturing, our sales representatives, engineers, technicians and draftsmen are at your service. Our team can suggest efficient and economical solutions.
DRAWINGS
Canam produces its own shop drawings for the fabrication of your steel joists, trusses, steel deck and girts.
FABRICATION
Our production equipment has always been at the leading edge of technology. We have continued to invest significantly to acquire the best available equipment in the industry, including computer-aided manufacturing and numerically-controlled machinery. Canam has an automated roll former for girts as well as several steel deck roll formers.
DELIVERY
Canam's advantage has always been our ability to deliver just on time, regardless of where or when you need our products. We know that your on-site erection crews can not afford to wait. For this reason, our trucks and semitrailers travel the continent, around the clock, to satisfy the requirements of your construction schedules.
4
NOTES ABOUT LOAD TABLES
STANDARDS
This Canam steel deck catalog presents load tables based on the recent edition of the standard CAN/CSA-S136-01 North American Specification for the Design of Cold-Formed Steel Structural Members.
In Canada, design shall be made under Limit States Design principles. For this reason, the uniform loads shown in the tables are the maximum factored loads that the deck can support.
The Canadian Sheet Steel Building Institute (CSSBI) specifies rules for steel deck practices. As a member of this organization, Canam applied those rules in the calculations for this catalog. The designer has the responsibility to follow practices published by the CSSBI for Canadian projects.
WARNING
Although every effort was made to ensure that all data in this catalog is factual and that the numerical values are accurate to a degree consistent with cold-formed design standards, Canam does not assume responsibility for errors or oversights that may result from the use of the information contained herein. Anyone making use of the contents of this catalog assumes all liability arising from such use. All suggestions for improvements to this publication will receive full consideration for future printings.
GRADE AND RESISTANCE
The latest version of the ASTM A 653M standard recognizes 7 different structural quality steels with their chemical composition and mechanical properties. The sheet steels normally used to form Canam steel deck profiles correspond to ASTM A 653M SS Grade 230. They have a yield strength of 230 MPa (33 ksi) and a tensile strength of 310 MPa (45 ksi). Steel with higher yield strength or different ASTM designation can be used to meet specific needs.
THICKNESS
CAN/CSA-S136-01 standard for the design of cold-formed steel structural members indicates that the thickness supplied shall not be less than 95% of the design thickness used. The generally accepted thickness of the zinc coating of a Z275 (G90) finish is approximately 0.040 mm (0.0015 in.).
STAINLESS STEEL
Upon request, we can provide stainless steel or steel protected by an aluminium-zinc coating. However, costs, availability and delivery schedules must be discussed with our sales department. Most of the stainless steel types have a yield strength of 205 MPa (30 ksi). The resistance values of stainless steel deck are considered to be 90% of those shown in the tables.
COATING
Canam steel deck profiles are available with Z275 (G90) or ZF75 (A25) zinc protection according to the standard ASTM A 653M. Upon request, Canam can also provide finish paint from the 8000 color series with an underlying zinc protection of Z275 (G90), or other types of material, given sufficient notice.
EMBOSSMENTS AND PERFORATIONS
The P-3615, P-3606, P-3623 and P-2432 deck profiles are available with embossments to act in composite action with a concrete slab. Tables for these composite sections show loads and unshored spans for normal weight concrete and light weight concrete on separate pages.
The P-3615, P-3606, P-2436 and P-2404 deck profiles are available with perforated web elements that reduce noise reverberation when fiberglass insulation strips are installed according to the assembly instructions for acoustical deck (refer to page 33). The resistance values of acoustical deck are considered to be 95% of those shown in the tables.
SHORTER LENGTHS
Upon special request made to our sales department, sheets are available in lengths of less than 1 800 mm (6 feet).
CONCENTRATED LOADS
The loads indicated in the tables are uniformly distributed and must not be used as the equivalent of point loads or linear loads. Proper analysis should be done by an engineer to verify the effects of those concentrated loads on the deck or composite deck-slab.
For example: ? The wheel load of rolling equipment on the steel
deck during roofing material installation. ? The large spacing between attachments of roofing
material to steel deck under uplift conditions. ? The footprint of a concentrated load on a slab.
Concentrated loads shall be analyzed to ensure they do not overstress the steel deck or the composite deck-slab locally.
5
P-3615 & P-3606
Canam's steel deck profiles P-3615 and P-3606 are roll formed to cover 914 mm (36 in.).
The deck is available with a galvanized coating according to the standard ASTM A 653M with zinc thickness corresponding to Z275 (G90) or ZF75 (A25). Upon agreement with our sales department, it is also possible to obtain steel deck with aluminium-zinc coating according to designation AZM150 (AZ50) of the standard ASTM A 792M.
Nominal thicknesses range from 0.76 mm (0.030 in.)
to 1.52 mm (0.060 in.). The flutes are 38 mm (1.5 in.) deep and are spaced at 152 mm (6 in.) center to center. The deck
can be rolled to lengths from 1 800 mm (6 ft.) to 12 200 mm (40 ft.).
DIMENSIONS
914 mm (36")
P-3615
64 mm (2 1/2")
89 mm (3 1/2")
152 mm (6")
38 mm (1 1/2")
914 mm (36")
114 mm (4 1/2")
P-3606
64 mm (2 1/2")
89 mm (3 1/2")
152 mm (6")
38 mm (1 1/2")
114 mm (4 1/2")
PHYSICAL PROPERTIES
Type
Nominal Thickness
mm
(in.)
Design Thickness
mm (in.)
Overall Depth
mm (in.)
Weight
kg/m2 (lb/ft2)
Section Modulus
M+
M?
mm3 (in3)
mm3 (in3)
22
0.76 (0.030)
0.762 (0.0300)
37.4 (1.47)
8.50 (1.74)
9 529 (0.1772)
10 081 (0.1875)
20
0.91 (0.036)
0.909 (0.0358)
37.5 (1.48)
10.07 (2.06)
11 558 (0.2150)
12 005 (0.2233)
18
1.21 (0.048)
1.217 (0.0479)
37.8 (1.49)
13.26 (2.72)
15 813 (0.2941)
15 994 (0.2975)
16
1.52 (0.060)
1.511 (0.0595)
38.1 (1.50)
16.34 (3.35)
19 786 (0.3680)
19 786 (0.3680)
? Effective properties are based on a unit width of 1 000 mm (S.I. units) or 12 in. (imperial units). ? Material according to ASTM A 653M SS Grade 230, yield strength of 230 MPa (33 ksi). ? Tables are calculated according to CAN/CSA-S136-01 standard.
38 mm (1 1/2")
38 mm (1 1/2")
Moment of Inertia for Deflection mm4 (in4) 202 228 (0.1481) 254 750 (0.1865) 363 493 (0.2662) 452 472 (0.3313)
6
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
Related searches
- 2019 ltsm catalogue ecdoe
- deck stair stringer code
- deck beam cantilever calculator
- deck beam post joist calculator
- deck joist calculator
- deck joist and beam calculator
- measuring piston deck height
- piston deck height gauge
- deck floor joist span calculator
- deck beam spacing calculator
- deck board calculator
- deck steps