MECO ELEVERDE | Home



Upgrade firmware stepsPlease use computer, not cell phoneThere are two situations when upgrading software:Ⅰ, The repeater is in the factory setting state:Connect the repeater wifi "wlan_repeater" to the computer first, then enter 192.168.10.1 in the browser.3175029210Enter the default password "admin" to enter the setting page-19050111125If it is the first time that the computer is connected to the wifi of this repeater, the browser will directly go to the "Setup Guide" page. At this time, you only need to re-enter "192.168.10.1" in the browser, as shown below:095250Select "Setting" on the settings page to enter the following interface-12700155575Click "Upgrade firmware" to enter the upgrade interface as shown below,-1270048895Then select the upgrade package in your computer-50800149860Click confirm to upgrade, please do not select "Keep the configuration"0116840Ⅱ, If the repeater has successfully relayed the superior routePlease use your mobile phone to check the "Device IP" in the app below, for example, "192.168.0.106" in the below020320Enter Device IP in the browser-63500170815Then repeat the steps of “Ⅰ” ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download