Section 08560 - Vinyl Windows



SECTION 08560

VINYL (PVC) WINDOWS

[pic]

Display hidden notes to specifier by using Tools/Options/View/Hidden Text

** NOTE TO SPECIFIER ** Mathews Brothers Company, vinyl windows for new construction, and replacement vinyl windows.

1

1. SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project. Spencer Walcott - New Construction vinyl windows (formerly Alliance Windgate) is designed for new construction. Spencer Walcott – Replacement vinyl windows (formerly Alliance Belmont) is designed for replacement applications.

A.

1. Basis of Design: Spencer Walcott (Alliance Windgate) by Mathews Brothers.

2. Type: Single hung windows.

3. Type: Double hung windows.

4. Type: Awning windows.

5. Type: Single casement windows.

6. Type: Double casement windows.

7. Type: Horizontal single sliding windows.

8. Type: Horizontal single hung windows.

9. Type: Fixed windows.

10. Type: Fixed architectural windows.

B. Vinyl replacement windows.

1. Basis of Design: Spencer Walcott (Alliance Belmont) by Mathews Brothers.

2. Type: Double hung windows.

3. Type: Single casement windows.

4. Type: Double casement windows.

2. RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A.

B. Section 06200 - Finish Carpentry: Wood trim other than furnished by window manufacturer.

C. Section 06220 - Millwork: Wood trim other than furnished by window manufacturer.

D. Section 07200 - Thermal Insulation: Insulation between unit and rough opening.

E. Section 07460 - Siding: Exterior siding.

F. Section 07920 - Joint Sealants: Sill sealant and perimeter caulking.

G. Section 09200 - Plaster and Gypsum Board: Interior Wall Finishing.

H. Section 09900 - Paints and Coatings: Paint other than factory applied finish.

3. REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A.

B. AAMA 701/702 - Combined Voluntary Specifications for Pile Weatherstrip and Replaceable Fenestration Weather Seals.

C. AAMA 902 - Voluntary Specification for Sash Balances.

D. ASTM International (ASTM):

1. ASTM E 283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen.

2. ASTM E 330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference.

3. ASTM E 547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference.

4. ASTM F 588 - Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact.

E. NFRC 100 - Procedure for Determining Fenestration Product U-Factors.

4. SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer’s data sheets on each product to be used, including:

1. Manufacturer’s technical data, product descriptions and installation guides.

2. Manufacturer’s head, jamb and sill details for each window specified.

3. Storage and handling requirements and recommendations.

C. Shop Drawings: Provide detailed elevations indicating size, glazing type, muntin type, and design of each window type; showing multiple window unit connection details and installation.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

D.

E. Verification Samples: Provide operating units of each type and style of window specified.

1. Verification samples, operable, scaled down, mock-up of specified window units.

2. Verification samples shall include all hardware including but not limited to balances, sash lock, and weatherstripping.

F. Test Reports: Submit certified independent testing agency reports indicating windows units meet or exceed specified performance requirements.

5. QUALITY ASSURANCE

A. Manufacturer Qualifications: Minimum ten (10) years experience manufacturing vinyl (PVC) windows,

B. Installer Qualifications: Utilize an installer having demonstrated experience on projects of a similar size with similar installation conditions.

C. Source Limitations: Obtain window units from one manufacturer through a single source.

D. Provide window units independently tested and found to be in compliance with ANSI/AAMA/NWWDA/A440 101/I.S.2, the most current testing protocols of The National Fenestration Rating Council and performance standards specified in this section.

E. Compliance: Provide windows that are labeled in compliance with the jurisdiction having authority over the project.

** NOTE TO SPECIFIER ** Delete options not required or available with specified window.

1.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

F.

1. Finish areas designated by architect.

2. Do not proceed with remaining work until workmanship and color are approved by architect.

3. Refinish mock-up area as required to produce acceptable work.

6. DELIVERY, STORAGE, AND HANDLING

A. Deliver windows to project site in undamaged condition; handle window units to prevent damage to components and finishes.

B. Store products in manufacturer’s unopened packaging, out of direct sunlight or high temperature locations, until ready for installation.

7. PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer’s absolute limits.

8. WARRANTY

** NOTE TO SPECIFIER ** Select project type. Delete one of the following two paragraphs. Select paragraph 1 for Residential applications or Paragraph 2 for commercial applications.

A.

1. Limited Lifetime Transferable Residential Warranty on extruded solid vinyl member and component parts. Insulating glass has Lifetime Warranty for material obstruction of transparency resulting from film formation or dust collection on the interior glass surfaces in residential construction. Consult warranty for complete details.

2. The warranty period for commercial project work such as apartments, housing authorities and other buildings not used by individual homeowners is twenty (20) years. Warranty covers all vinyl, glass, and component parts. Consult commercial warranty for complete details.

2 PRODUCTS

1. MANUFACTURERS

A. Acceptable manufacturer: Mathews Brothers Company, 22 Perkins Rd, Belfast, ME 04915. Toll Free: (800) 615-2004 | Tel: (207) 338-6490 | Fax: (207) 338-6300

Email: info@ | Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

** NOTE TO SPECIFIER ** Delete if not required.

2.

A. Single Hung Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame and Top Sash: Nominal 0.065 inch (1.6 mm) thick, multichambered polyvinyl chloride (PVC) frame with miter cut and fusion-welded corners. Top sash fixed.

2. Channel Pocket: Recessed, integral 3/4 inch (19 mm), dual wall J-channel pocket.

** NOTE TO SPECIFIER ** Delete frame color not required.

3.

4. Frame Color: Desert Sand.

5. Frame Color: As indicated on the drawings.

6. Frame Color: As selected by architect from manufacturer’s full range of frame color options.

7. Glazing: 3/4 inch nominal thickness insulating glass units secured to sash frame using dual adhesion closed cell foam fenestration glazing tape, vinyl glazing bead, and Duralite® composite spacer, with the glass/glazing option below.

a. Glass Type: Clear.

b. Glass Type: Low-E.

c. Glass Type: Low-E with Argon gas.

d. Glass Type: Tempered.

e. Glass Type: Obscure.

f. Glass Type: Laminated.

g. Glass Type: As indicated on the drawings.

h. Glass Type: As selected by architect from manufacturer’s full range of glazing options.

8. Sash Balances: 1/2 inch (13 mm) flat coil spring balances, complying with AAMA-902. The locking terminal and pivot bar system shall be designed to positively lock, to provide accurate alignment of the sash and the frame during installation and operation.

9. Sash Locks: Lead free composite with self-centering cam action type locks. Double locks where openings exceed 30-1/4 inches (768 mm) wide.

10. Weatherstripping: In compliance with AAMA 701.2.

11. Screens: Extruded aluminum frame with BetterVue™ 20 x 20 charcoal finished fiberglass mesh.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

12.

13. Contour Grids: Colonial.

14. Contour Grids: Prairie.

15. Contour Grids: Queen Anne.

16. Contour Grids: Diamond.

17. Contour Grids: As indicated on the drawings.

18. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

19.

20. Grid Between the Glass (GBG) Dividers: Colonial.

21. Grid Between the Glass (GBG) Dividers: Prairie.

22. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

23. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete color options not required.

24.

25. Exterior Painted Colors: Dark Forest.

26. Exterior Painted Colors: Edgewood Blue.

27. Exterior Painted Colors: Pearl.

28. Exterior Painted Colors: White.

29. Exterior Painted Colors: Cream White.

30. Exterior Painted Colors: Adobe.

31. Exterior Painted Colors: Earth Brown.

32. Exterior Painted Colors: Dark Brown.

33. Exterior Painted Colors: Bronze.

34. Exterior Painted Colors: Black.

35. Exterior Painted Colors: Fog.

36. Exterior Painted Colors: Barn Red.

37. Exterior Painted Colors: Boysenberry.

38. Exterior Painted Colors: Burgundy.

39. Exterior Painted Colors: Slate Blue.

40. Exterior Painted Colors: Gray.

41. Exterior Painted Colors: As indicated on the drawings.

42. Exterior Painted Colors: As selected by architect from manufacturer’s full range of exterior painting options.

43. Accessories:

** NOTE TO SPECIFIER ** Delete options for accessories below not required.

a.

b. Exterior Casing: Applied 3-1/2 inches by 1-1/4 inches (89 mm by 32 mm).

c. Exterior Casing: Applied 2 inches by 1-1/16 inches (51 mm by 27 mm), Brickmould 908.

d. Interior Jamb: Applied extension jambs for 4-9/16 inches (116 mm).

e. Interior Jamb: Applied extension jambs for 6 9/16 inches (167 mm).

f. Drywall Returns: Standard, none.

g. Drywall Returns: Applied, 1/2 inch (13 mm).

h. Drywall Returns: Applied, 5/8 inch (16 mm).

i. Drywall Returns: Applied, 3/4 inch (19 mm).

C. Performance:

1. Structural Rating: H-R30, see Certified Structural Report.

a. Test Sizes: 48 inches by 72 inches (1168 mm by 1524 mm) in accordance with ANSI/AAMA/NWWDA 101/I.S.2. Test size for DP 40 at 44 inches by 63 inches.

** NOTE TO SPECIFIER ** Delete options for DP performance not required.

b.

c. DP Performance: 20.

d. DP Performance: 25.

e. DP Performance: 30.

f. DP Performance: 35.

g. DP Performance: 40.

2. Forced Entry: Type B, Grade 10 in accordance with ASTM F 588.

3. Thermal Transmittance: The following values are in accordance with NFRC 100.

a. Low-E with Argon:

1) U-Factor: 0.29.

2) SHGC: 0.29.

3) R-Value: 3.45.

** NOTE TO SPECIFIER ** Delete if not required.

3.

A. Double Hung Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame: Nominal 0.065 inch (1.6 mm) multichambered polyvinyl chloride (PVC) frame with miter cut and fusion-welded corners. Sash shall be a nominal 0.065 inch (1.6 mm) thickness and fusion-welded corners.

2. Channel Pocket: Recessed, integral 3/4 inch (19 mm), dual wall J-channel pocket.

3. Sash Balances: 1/2 inch (13 mm) flat coil spring balance. The locking terminal and pivot bar system shall be designed to positively interlock, to provide accurate alignment of the sash and the frame during installation and operation.

4. Sash Locks: Lead free composite with self-centering cam action type locks. Double locks where openings exceed 30-1/4 inches (768 mm) wide.

5. Weatherstripping: In compliance with AAMA 701.2.

** NOTE TO SPECIFIER ** Delete frame color not required.

6.

7. Frame Color: Desert Sand.

8. Frame Color: As indicated on the drawings.

9. Frame Color: As selected by architect from manufacturer’s full range of frame color options.

10. Glazing: 3/4 inch nominal thickness insulating glass units secured to sash frame using dual adhesion closed cell foam fenestration glazing tape, vinyl glazing bead, and Duralite® composite spacer, with the glass/glazing option below.

a. Glass Type: Clear.

b. Glass Type: Low-E.

c. Glass Type: Low-E with Argon gas.

d. Glass Type: Tempered.

e. Glass Type: Obscure.

f. Glass Type: Laminated.

g. Glass Type: As indicated on the drawings.

h. Glass Type: As selected by architect from manufacturer’s full range of glazing options.

11. Screens: Extruded aluminum frame with BetterVue™ 20 x 20 charcoal finished fiberglass mesh.

12. Weatherstripping: In compliance with AAMA 701.2.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

13.

14. Contour Grids: Colonial.

15. Contour Grids: Prairie.

16. Contour Grids: Queen Anne.

17. Contour Grids: Diamond.

18. Contour Grids: As indicated on the drawings.

19. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

20.

21. Grid Between the Glass (GBG) Dividers: Colonial.

22. Grid Between the Glass (GBG) Dividers: Prairie.

23. Grid Between the Glass (GBG) Dividers: Queen Anne.

24. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

25. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete if not required.

26.

** NOTE TO SPECIFIER ** Delete color options not required.

27.

28. Exterior Painted Colors: Dark Forest.

29. Exterior Painted Colors: Edgewood Blue.

30. Exterior Painted Colors: Pearl.

31. Exterior Painted Colors: White.

32. Exterior Painted Colors: Cream White.

33. Exterior Painted Colors: Adobe.

34. Exterior Painted Colors: Earth Brown.

35. Exterior Painted Colors: Dark Brown.

36. Exterior Painted Colors: Bronze.

37. Exterior Painted Colors: Black.

38. Exterior Painted Colors: Fog.

39. Exterior Painted Colors: Barn Red.

40. Exterior Painted Colors: Boysenberry.

41. Exterior Painted Colors: Burgundy.

42. Exterior Painted Colors: Slate Blue.

43. Exterior Painted Colors: Gray.

44. Exterior Painted Colors: As indicated on the drawings.

45. Exterior Painted Colors: As selected by architect from manufacturer’s full range of exterior painting options.

46. Accessories:

** NOTE TO SPECIFIER ** Delete options for accessories below not required.

a.

b. Exterior Casing: Applied 3-1/2 inches by 1-1/4 inches (89 mm by 32 mm).

c. Exterior Casing: Applied 2 inches by 1-1/16 inches (51 mm by 27 mm), Brickmould 908.

d. Interior Jamb: Applied extension jambs for 4-9/16 inches (116 mm).

e. Interior Jamb: Applied extension jambs for 6 9/16 inches (167 mm).

f. Drywall Returns: Standard, none.

g. Drywall Returns: Applied, 1/2 inch (13 mm).

h. Drywall Returns: Applied, 5/8 inch (16 mm).

i. Drywall Returns: Applied, 3/4 inch (19 mm).

C. Performance:

1. Structural Rating: H-R30, see Certified Structural Report.

a. Test Sizes: 48 inches by 72 inches (1168 mm by 1524 mm) in accordance with ANSI/AAMA/NWWDA 101/I.S.2.

** NOTE TO SPECIFIER ** Delete options for DP performance not required.

b.

c. DP Performance: 20.

d. DP Performance: 25.

e. DP Performance: 30.

f. DP Performance: 35.

g. DP Performance: 40.

h. DP Performance: 45.

i. DP Performance: 50.

2. Forced Entry: Type B, Grade 10 in accordance with ASTM F 588.

3. Thermal Transmittance: The following values are in accordance with NFRC 100.

a. Low-E with Argon:

1) U-Factor: 0.29.

2) SHGC: 0.30.

3) R-Value: 3.45.

** NOTE TO SPECIFIER ** Delete if not required.

4.

A. Awning Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame and Sash: Multichambered vinyl frame and sash, aluminum reinforced for hardware attachment, with miter cut and fusion-welded corners.

** NOTE TO SPECIFIER ** Delete frame color not required.

2.

3. Frame Color: Desert Sand.

4. Frame Color: As indicated on the drawings.

5. Frame Color: As selected by architect from manufacturer’s full range of frame color options.

6. Glazing: 3/4 inch nominal thickness insulating glass units with Duralite® composite spacer secured to sash frame using a dual adhesion closed cell foam fenestration glazing tape and rigid PVC glazing bead.

a. Glass Type: Clear.

b. Glass Type: Low-E.

c. Glass Type: Low-E with Argon gas.

d. Glass Type: Tempered.

e. Glass Type: Obscure.

f. Glass Type: Laminated.

g. Glass Type: As indicated on the drawings.

h. Glass Type: As selected by architect from manufacturer’s full range of glazing options.

7. Hinges: Truth with E-Gard® finish.

8. Sash Locks: Sequentially locking multi-point type with single handle actuator.

9. Weatherstripping: In compliance with AAMA 701.2.

10. Operator: Truth with E-Gard® finish.

11. Screens: Extruded aluminum frame with BetterVue™ 20 x 20 charcoal finished fiberglass mesh.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

12.

13. Contour Grids: Colonial.

14. Contour Grids: Prairie.

15. Contour Grids: Queen Anne.

16. Contour Grids: Diamond.

17. Contour Grids: As indicated on the drawings.

18. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

19.

20. Grid Between the Glass (GBG) Dividers: Colonial.

21. Grid Between the Glass (GBG) Dividers: Prairie.

22. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

23. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete if not required.

24.

** NOTE TO SPECIFIER ** Delete color options not required.

25.

26. Exterior Painted Colors: Dark Forest.

27. Exterior Painted Colors: Edgewood Blue.

28. Exterior Painted Colors: Pearl.

29. Exterior Painted Colors: White.

30. Exterior Painted Colors: Cream White.

31. Exterior Painted Colors: Adobe.

32. Exterior Painted Colors: Earth Brown.

33. Exterior Painted Colors: Dark Brown.

34. Exterior Painted Colors: Bronze.

35. Exterior Painted Colors: Black.

36. Exterior Painted Colors: Fog.

37. Exterior Painted Colors: Barn Red.

38. Exterior Painted Colors: Boysenberry.

39. Exterior Painted Colors: Burgundy.

40. Exterior Painted Colors: Slate Blue.

41. Exterior Painted Colors: Gray.

42. Exterior Painted Colors: As indicated on the drawings.

43. Exterior Painted Colors: As selected by architect from manufacturer’s full range of exterior painting options.

44. Accessories:

** NOTE TO SPECIFIER ** Delete options for accessories below not required.

a.

b. Exterior Casing: Applied 3-1/2 inches by 1-1/4 inches (89 mm by 32 mm).

c. Exterior Casing: Applied 2 inches by 1-1/16 inches (51 mm by 27 mm), Brickmould 908.

d. Interior Jamb: Applied extension jambs for 4-9/16 inches (116 mm).

e. Interior Jamb: Applied extension jambs for 6 9/16 inches (167 mm).

f. Drywall Returns: Standard, none.

g. Drywall Returns: Applied, 1/2 inch (13 mm).

h. Drywall Returns: Applied, 5/8 inch (16 mm).

i. Drywall Returns: Applied, 3/4 inch (19 mm).

C. Performance:

1. Structural Rating: C-30, see Certified Structural Report.

a. Test Sizes: 48 inches x 36 inches (1219 mm x 914 mm) in accordance with ANSI/AAMA/NWWDA 101/I.S.2.

2. Forced Entry: Type B, Grade 30 in accordance with ASTM F 588.

3. Thermal Transmittance: The following values are in accordance with NFRC 100.

a. Low-E with Argon:

1) U-Factor: 0.26.

2) SHGC: 0.29.

3) R-Value: 3.85.

** NOTE TO SPECIFIER ** Delete if not required.

5.

A. Single Casement Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame and Sash: Multichambered aluminum reinforced vinyl frame and sash with miter cut and fusion-welded corners.

** NOTE TO SPECIFIER ** Delete frame color not required.

2.

3. Frame Color: Desert Sand.

4. Frame Color: As indicated on the drawings.

5. Frame Color: As selected by architect from manufacturer’s full range of frame color options.

6. Glazing: 3/4 inch nominal thickness insulating glass units with Duralite® composite spacer secured to sash frame using a dual adhesion closed cell foam fenestration glazing tape and rigid PVC glazing bead. Glazed with the glass package below.

a. Glass Type: Clear.

b. Glass Type: Low-E.

c. Glass Type: Low-E with Argon gas.

d. Glass Type: Tempered.

e. Glass Type: Obscure.

f. Glass Type: Laminated.

g. Glass Type: As indicated on the drawings.

h. Glass Type: As selected by Architect from manufacturer’s full range of glazing options.

7. Hinges: Truth with E-Gard® finish.

8. Sash Locks: Sequentially locking multi-point type with single handle actuator.

9. Operator: Truth with E-Gard® finish.

10. Weatherstripping: In compliance with AAMA 701.2.

11. Screens: Extruded aluminum frame with BetterVue™ 20x20 charcoal finished fiberglass mesh.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

12.

13. Contour Grids: Colonial.

14. Contour Grids: Prairie.

15. Contour Grids: Queen Anne.

16. Contour Grids: Diamond.

17. Contour Grids: As indicated on the drawings.

18. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

19.

20. Grid Between the Glass (GBG) Dividers: Colonial.

21. Grid Between the Glass (GBG) Dividers: Prairie.

22. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

23. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete if not required.

24.

** NOTE TO SPECIFIER ** Delete color options not required.

25.

26. Exterior Painted Colors: Dark Forest.

27. Exterior Painted Colors: Edgewood Blue.

28. Exterior Painted Colors: Pearl.

29. Exterior Painted Colors: White.

30. Exterior Painted Colors: Cream White.

31. Exterior Painted Colors: Adobe.

32. Exterior Painted Colors: Earth Brown.

33. Exterior Painted Colors: Dark Brown.

34. Exterior Painted Colors: Bronze.

35. Exterior Painted Colors: Black.

36. Exterior Painted Colors: Fog.

37. Exterior Painted Colors: Barn Red.

38. Exterior Painted Colors: Boysenberry.

39. Exterior Painted Colors: Burgundy.

40. Exterior Painted Colors: Slate Blue.

41. Exterior Painted Colors: Gray.

42. Exterior Painted Colors: As indicated on the drawings.

43. Exterior Painted Colors: As selected by architect from manufacturer’s full range of exterior painting options.

44. Accessories:

** NOTE TO SPECIFIER ** Delete options for accessories below not required.

a.

b. Exterior Casing: Applied 3-1/2 inches by 1-1/4 inches (89 mm by 32 mm).

c. Exterior Casing: Applied 2 inches by 1-1/16 inches (51 mm by 27 mm), Brickmould 908.

d. Interior Jamb: Applied extension jambs for 4-9/16 inches (116 mm).

e. Interior Jamb: Applied extension jambs for 6 9/16 inches (167 mm).

f. Drywall Returns: Standard, none.

g. Drywall Returns: Applied, 1/2 inch (13 mm).

h. Drywall Returns: Applied, 5/8 inch (16 mm).

i. Drywall Returns: Applied, 3/4 inch (19 mm).

C. Performance:

1. Structural Rating: C-40, see Certified Structural Report.

a. Test Sizes: 36 inches x 72 inches in accordance with ANSI/AAMA/NWWDA 101/I.S.2.

2. Forced Entry: Type B, Grade 30 in accordance with ASTM F 588.

3. Thermal Transmittance: The following values are in accordance with NFRC 100.

a. Low-E with Argon:

1) U-Factor: 0.27.

2) SHGC: 0.29.

3) R-Value: 3.70.

** NOTE TO SPECIFIER ** Delete if not required.

6.

A. Double Casement Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame and Sash: Multichambered, aluminum reinforced vinyl, with miter cut and fusion-welded corners.

** NOTE TO SPECIFIER ** Delete frame color not required.

2.

3. Frame Color: Desert Sand.

4. Frame Color: As indicated on the drawings.

5. Frame Color: As selected by architect from manufacturer’s full range of frame color options.

6. Glazing: 3/4 inch Nominal thickness insulating glass units with Duralite® composite spacer, secured to sash frame using a dual adhesion closed cell foam fenestration glazing tape and rigid PVC glazing bead, with the glass/glazing option below.

a. Glass Type: Clear.

b. Glass Type: Low-E.

c. Glass Type: Low-E with Argon gas.

d. Glass Type: Tempered.

e. Glass Type: Obscure.

f. Glass Type: Laminated.

g. Glass Type: As indicated on the drawings.

h. Glass Type: As selected by architect from manufacturer’s full range of glazing options.

7. Hinges: Truth with E-Gard® finish.

8. Sash Locks: Sequentially locking multi-point type with single handle actuator.

9. Operator: Truth with E-Gard® finish.

10. Weatherstripping: In compliance with AAMA 701.2.

11. Screens: Extruded aluminum frame with BetterVue™ 20x20 charcoal finished fiberglass mesh.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

12.

13. Contour Grids: Colonial.

14. Contour Grids: Prairie.

15. Contour Grids: Queen Anne.

16. Contour Grids: Diamond.

17. Contour Grids: As indicated on the drawings.

18. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

19.

20. Grid Between the Glass (GBG) Dividers: Colonial.

21. Grid Between the Glass (GBG) Dividers: Prairie.

22. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

23. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete if not required.

24.

** NOTE TO SPECIFIER ** Delete color options not required.

25.

26. Exterior Painted Colors: Dark Forest.

27. Exterior Painted Colors: Edgewood Blue.

28. Exterior Painted Colors: Pearl.

29. Exterior Painted Colors: White.

30. Exterior Painted Colors: Cream White.

31. Exterior Painted Colors: Adobe.

32. Exterior Painted Colors: Earth Brown.

33. Exterior Painted Colors: Dark Brown.

34. Exterior Painted Colors: Bronze.

35. Exterior Painted Colors: Black.

36. Exterior Painted Colors: Fog.

37. Exterior Painted Colors: Barn Red.

38. Exterior Painted Colors: Boysenberry.

39. Exterior Painted Colors: Burgundy.

40. Exterior Painted Colors: Slate Blue.

41. Exterior Painted Colors: Gray.

42. Exterior Painted Colors: As indicated on the drawings.

43. Exterior Painted Colors: As selected by architect from manufacturer’s full range of exterior painting options.

44. Accessories:

** NOTE TO SPECIFIER ** Delete options for accessories below not required.

a.

b. Exterior Casing: Applied 3-1/2 inches by 1-1/4 inches (89 mm by 32 mm).

c. Exterior Casing: Applied 2 inches by 1-1/16 inches (51 mm by 27 mm), Brickmould 908.

d. Interior Jamb: Applied extension jambs for 4-9/16 inches (116 mm).

e. Interior Jamb: Applied extension jambs for 6 9/16 inches (167 mm).

f. Drywall Returns: Standard, none.

g. Drywall Returns: Applied, 1/2 inch (13 mm).

h. Drywall Returns: Applied, 5/8 inch (16 mm).

i. Drywall Returns: Applied, 3/4 inch (19 mm).

C. Performance:

1. Structural Rating: Varies by size and configuration. See Certified Structural Report.

2. Forced Entry: Type B, Grade 30 in accordance with ASTM F 588.

3. Thermal Transmittance: The following values are in accordance with NFRC 100.

a. Low-E with Argon:

1) U-Factor: 0.27.

2) SHGC: 0.29.

3) R-Value: 3.70.

** NOTE TO SPECIFIER ** Delete if not required.

7.

A. Horizontal Sliding Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Horizontal Sliding (Glider) Vinyl Windows:

** NOTE TO SPECIFIER ** Delete if not required.

1.

2. Configuration: Double slider.

3. Configuration: 3-Lite end-vent slider.

4. Configuration: As indicated on drawings.

5. Sizes: As indicated on drawings.

C. Window Attributes:

1. Frame and Top Sash: Nominal 0.065 inch (2 mm) frame thickness polyvinyl chloride (PVC) with miter cut and fusion-welded corners.

2. Glazing:

a. In compliance with ASTM E774.

b. 3/4 inch (22 mm) nominal thickness.

c. Insulating glass units: Duralite® composite spacer secured to sash frame with dual adhesion, closed cell fenestration glazing tape, and rigid PVC glazing bead.

** NOTE TO SPECIFIER ** Delete glass types not required.

1)

2) Glass Type: Low-E with Argon.

3) Glass Type: Low-E.

4) Glass Type: Tempered.

5) Glass Type: Laminated.

6) Glass Type: Obscure.

7) Glass Type: As indicated on drawings.

** NOTE TO SPECIFIER ** For opening exceeding 30-1/4 inches (762 mm) manufacturer recommends double locks. Delete sash lock options not required.

3.

4. Sash Locks: As indicated on drawings.

5. Weatherstripping: In compliance with AAMA 701.2.

6. Screens: Extruded aluminum frame with BetterVue™ 18x16 charcoal finished fiberglass mesh.

** NOTE TO SPECIFIER ** Delete color options not required.

7.

8. Window Frame Color: Desert Sand.

9. Window Frame Color: As indicated on the drawings.

10. Simulated Divided Lite Grilles: Grilles applied to both sides of glazing.

** NOTE TO SPECIFIER ** Delete style options not required.

a.

b. Style: Colonial.

c. Style: Prairie.

d. Style: Queen Anne.

e. Style: Diamond.

f. Style: None.

g. Style: As indicated on drawings.

11. (GBG) Simulated Divided Lite Contour Grids Style: Grids between panes of glass.

** NOTE TO SPECIFIER ** Delete if not required.

a.

b. Style: Colonial.

c. Style: Prairie.

d. Style: None.

e. Style: As indicated on drawings.

12. Operating sash shall have heavy duty brass rollers.

D. Window Performance Requirements:

1. Structural Rating: Certified Structural Report; H-R30.

a. Test Sizes: 72 inches by 48 inches (1828 mm by 1219 mm) in accordance with ANSI/AAMA/NWWDA 101/I.S.2.

2. Forced Entry Resistance: In compliance with ASTM F 588, Type B, Grade 10.

3. Thermal Transmittance: NFRC 100.

** NOTE TO SPECIFIER ** The following value only apply to Low-E, argon filled, insulating glass. Refer to manufacturer’s literature for values associated with selection of glazing option other than Low-E, argon filled, insulating glass. Delete if not required.

a.

1) U-Factor: 0.28.

2) SHGC: 0.29.

3) R-Value: 3.57.

** NOTE TO SPECIFIER ** Delete if not required.

8.

A. Single Sliding Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame: Nominal 0.065 inch (1.6 mm) multichambered thickness vinyl frame.

2. Sill and Jamb: Corners miter cut and fusion-welded.

3. Sash Thickness: Nominal 0.065 inch (1.6 mm) with miter cut and welded corners.

4. Sash Locks: Lead free composite with self-centering cam action type locks. Double locks where openings exceed 30-1/4 inches (768 mm) tall.

5. Operating Sash: Manufacturer’s standard with heavy duty brass rollers.

6. Channel Pocket: Integral 3/4 inch (19 mm) dual wall recessed J-channel pocket.

7. Screens: Extruded aluminum frame with BetterVue™ 20x20 charcoal finished fiberglass mesh.

8. Weatherstripping: In compliance with AAMA 701.2.

9. Glazing: 3/4 inch (19 mm) nominal thickness insulated glass units. Duralite® composite spacer secured to sash frame with dual adhesion, closed cell fenestration glazing tape, and glazing bead.

** NOTE TO SPECIFIER ** Delete options for glazing types not required.

a.

b. Glass Type: Low-E with Argon.

c. Glass Type: Low-E.

d. Glass Type: Tempered.

e. Glass Type: Laminated.

f. Glass Type: Obscure.

g. Glass Type: As indicated on drawings.

h. Glass Type: As selected by architect.

** NOTE TO SPECIFIER ** Delete color options not required.

10.

11. Color: Desert.

12. Color: Sand.

13. Color: As indicated on drawings.

14. Color: As selected by architect.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

15.

16. Contour Grids: Colonial.

17. Contour Grids: Prairie.

18. Contour Grids: Queen Anne.

19. Contour Grids: Diamond.

20. Contour Grids: As indicated on the drawings.

21. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

22.

23. Grid Between the Glass (GBG) Dividers: Colonial.

24. Grid Between the Glass (GBG) Dividers: Prairie.

25. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

26. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

C. Performance

1. Structural Rating: H-R35 - Test Size; 72 inches x 48 inches (1829 mm x 1219 mm) in accordance with ANSI/AAMA/NWWDA 101/I.S.2. See Certified Structural Report.

2. Forced Entry: Type B, Grade 10 in accordance with ASTM F 588.

** NOTE TO SPECIFIER ** All Spencer Walcott/Alliance Windows shall be tested for energy efficiency and structural performance according to the most current testing protocols of The National Fenestration Rating Council, and ANSI/AAMA/WDMA 101/I.S standards. All Spencer Walcott/Alliance Sliding Windows will perform to the 2010 ENERGY STAR® Standards when glazed with ‘Stimulus-E”, argon filled insulating glass. Delete if not required.

3.

a. Low-E with Argon:

1) U-Factor: 0.28.

2) SHGC: 0.29.

3) R-Value: 3.57.

** NOTE TO SPECIFIER ** Delete if not required.

9.

A. Fixed Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

** NOTE TO SPECIFIER ** Delete if not required.

B.

1. Sizes: As indicated on drawings.

2. Accessory Materials:

a. Perimeter Joint Sealant: Type as recommended in printed installation instructions from manufacturer for use between nail fin and exterior sheathing.

b. Insulation: Type as recommended in printed installation instructions from manufacturer for use between window frame and rough opening.

** NOTE TO SPECIFIER ** Delete if not required.

C.

1. Sizes: As indicated on drawings.

2. Accessory Materials:

a. Perimeter Joint Sealant: Type as recommended in printed installation instructions from manufacturer for use between nail fin and exterior sheathing.

b. Insulation: Batt Insulation for use between window frame and rough opening. Do not use Expanding Foam Insulation.

D. Vinyl Extended Arch and Eyebrow Windows:

1. Sizes: As indicated on drawings.

2. Accessory Materials:

a. Perimeter Joint Sealant: Type as recommended in printed installation instructions from manufacturer for use between nail fin and exterior sheathing.

b. Insulation: Batt Insulation for use between window frame and rough opening. Do not use Expanding Foam Insulation.

** NOTE TO SPECIFIER **. Delete series not required.

3.

4. Series B; Shoulder Height: 19-1/8 inches.

5. Series C; Shoulder Height: 31-1/8 inches.

6. Series D; Shoulder Height: 39-1/8 inches.

7. Series E; Shoulder Height: 43-1/8 inches.

8. Series F; Shoulder Height: 47-1/8 inches.

9. Series G; Shoulder Height: 55-1/8 inches.

10. Series H; Shoulder Height: 61-1/8 inches.

11. Series J; Shoulder Height: 67-1/8 inches.

12. Series K; Shoulder Height: 79-1/8 inches.

** NOTE TO SPECIFIER ** Delete if not required.

13.

14. Simulated Divided Lite Style: Cathedral.

15. Simulated Divided Lite Style: Prairie.

16. Simulated Divided Lite Style: None.

17. Simulated Divided Lite Style: Style as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete if not required.

10.

A. Fixed Architectural Windows for New Construction: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

** NOTE TO SPECIFIER ** Delete window if not required.

B.

** NOTE TO SPECIFIER ** Delete styles not required.

1.

2. Simulated Divided Lite Style: Colonial 4-lite.

3. Simulated Divided Lite Style: Colonial 9-lite.

4. Simulated Divided Lite Style: None.

5. Simulated Divided Lite Style: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete window sizes not required.

6.

7. Window Size, Designation: 35-1/2 inch diameter, CI3636.

8. Window Size, Designation: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete window if not required.

C.

** NOTE TO SPECIFIER ** Delete styles not required.

1.

2. Simulated Divided Lite Style: Sunstar.

** NOTE TO SPECIFIER ** This pattern is only available in widths over 56 inches. Delete styles not required.

3.

4. Simulated Divided Lite Style: Starburst.

5. Simulated Divided Lite Style: None.

6. Simulated Divided Lite Style: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete if not required.

7.

8. Window Size, Designation: 27-1/2 inches by 13-3/4 inches, HRD2814.

9. Window Size, Designation: 31-1/2 inches by 15-3/4 inches, HRD3216.

10. Window Size, Designation: 35-1/2 inches by 17-3/4 inches, HRD3618.

11. Window Size, Designation: 39-1/2 inches by 19-3/4 inches, HRD4020.

12. Window Size, Designation: 43-1/2 inches by 21-3/4 inches, HRD4422.

13. Window Size, Designation: 47-1/2 inches by 23-3/4 inches, HRD4824.

14. Window Size, Designation: 55-1/2 inches by 27-3/4 inches, HRD5628.

15. Window Size, Designation: 59-1/2 inches by 29-3/4 inches, HRD6030.

16. Window Size, Designation: 63-1/2 inches by 31-3/4 inches, HRD6432.

17. Window Size, Designation: 71-1/2 inches by 35-3/4 inches, HRD7236.

18. Window Size, Designation: As indicated on the drawings.

** NOTE TO SPECIFIER ** Choose left hand or right hand window as viewed from the outside looking in. See manufacturer’s literature for details. Delete window if not required.

D.

** NOTE TO SPECIFIER ** Delete styles not required.

1.

2. Simulated Divided Lite Style: Right Hand Sunburst.

3. Simulated Divided Lite Style: Left Hand Sunstar.

4. Simulated Divided Lite Style: Right Hand Sunstar.

5. Simulated Divided Lite Style: Left Hand Starburst.

6. Simulated Divided Lite Style: Right Hand Starburst.

7. Simulated Divided Lite Style: None.

8. Simulated Divided Lite Style: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete options not required.

9.

10. Window Size, Designation: 27-1/2 inch radius, QRDL2828.

11. Window Size, Designation: 29-1/2 inch radius, QRDL3030.

12. Window Size, Designation: 31-1/2 inch radius, QRDL3232.

13. Window Size, Designation: 35-1/2 inch radius, QRDL3636.

14. Window Size, Designation: 23-1/2 inch radius, QRDR2424.

15. Window Size, Designation: 27-1/2 inch radius, QRDR2828.

16. Window Size, Designation: 29-1/2 inch radius, QRDR3030.

17. Window Size, Designation: 31-1/2 inch radius, QRDR3232.

18. Window Size, Designation: 35-1/2 inch radius, QRDR3636.

19. Window Size, Designation: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete window if not required.

E.

** NOTE TO SPECIFIER ** Delete options not required.

1.

2. Window Size, Designation: 31-1/2 inches by 31-1/2 inches, OTG3232.

3. Window Size, Designation: 35-1/2 inches by 35-1/2 inches, OTG3636.

4. Window Size, Designation: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete window if not required.

F.

** NOTE TO SPECIFIER ** Delete styles not required.

1.

2. Simulated Divided Lite Style: Sunstar.

3. Simulated Divided Lite Style: Starburst.

4. Simulated Divided Lite Style: None.

5. Simulated Divided Lite Style: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete options not required.

6.

7. Window Size, Designation: 71-1/2 inches by 19-1/2 inches, EL7220.

8. Window Size, Designation: 83-1/2 inches by 19-1/2 inches, EL8420.

9. Window Size, Designation: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete window if not required.

G.

** NOTE TO SPECIFIER ** Delete options not required.

1.

2. Window Size, Designation: 35-1/2 inches by 55-1/2 inches, OV3656.

3. Window Size, Designation: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete window if not required.

H.

** NOTE TO SPECIFIER ** Delete styles not required.

1.

2. Simulated Divided Lite Style: Starburst.

3. Simulated Divided Lite Style: None.

4. Simulated Divided Lite Style: As indicated on the drawings.

** NOTE TO SPECIFIER ** Delete options not required.

5.

6. Window Size, Designation: 35-1/2 inches by 17-1/2 inches, HOV3628.

7. Window Size, Designation: Size as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete window if not required.

I.

** NOTE TO SPECIFIER ** Delete options not required.

1.

2. Window Size, Designation: 19-1/2 inches by 39-1/2 inches, GC2040.

3. Window Size, Designation: 21-1/2 inches by 43-1/2 inches, GC2244.

4. Window Size, Designation: 23-1/2 inches by 47-1/2 inches, GC2448.

5. Window Size, Designation: 27-1/2 inches by 55-1/2 inches, GC2856.

6. Window Size, Designation: 29-1/2 inches by 59-1/2 inches, GC3060.

7. Window Size, Designation: 35-1/2 inches by 71-1/2 inches, GC3672.

8. Window Size, Designation: As indicated on the drawings

9. Accessory Materials:

a. Perimeter Joint Sealant: Type as recommended in printed installation instructions from manufacturer for use between nail fin and exterior sheathing.

b. Insulation: Batt Insulation for use between window frame and rough opening. Do not use Expanding Foam Insulation.

** NOTE TO SPECIFIER ** Choose left hand or right hand window as viewed from the outside looking in. See manufacturer’s literature for details. Delete window if not required.

J.

** NOTE TO SPECIFIER ** Delete window configuration not required.

1.

2. Window Configuration: Right hand.

** NOTE TO SPECIFIER ** Delete options not required.

3.

4. Window Size, Designation: 21-1/2 inches by 59-1/2 inches, HGCL2260.

5. Window Size, Designation: 25-1/2 inches by 65-1/2 inches, HGCL2666.

6. Window Size, Designation: 27-1/2 inches by 71-1/2 inches, HGCL2872.

7. Window Size, Designation: 17-1/2 inches by 53-1/2 inches, HGCR1854.

8. Window Size, Designation: 21-1/2 inches by 59-1/2 inches, HGCR2260.

9. Window Size, Designation: 25-1/2 inches by 65-1/2 inches, HGCR2666.

10. Window Size, Designation: 27-1/2 inches by 71-1/2 inches, HGCR2872.

11. Window Size, Designation: Size as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete if not required.

11.

A. Replacement Double Hung Windows: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Window Attributes:

1. Frame and Top Sash: Nominal 0.065 inch (1.7 mm) frame thickness polyvinyl chloride (PVC) with miter cut and fusion-welded corners.

2. J-channel Pocket: Integral, 3/4 inch (21 mm).

3. Glazing:

a. In compliance with ASTM E774.

b. 3/4 inch (22 mm) nominal thickness.

c. Insulating glass units: Secured to sash frame with dual adhesion, closed cell fenestration glazing tape, glazing bead, and Duralite® composite spacer.

** NOTE TO SPECIFIER ** Delete glass types not required.

1)

2) Glass Type: Low-E with Argon.

3) Glass Type: Low-E.

4) Glass Type: Tempered.

5) Glass Type: Laminated.

6) Glass Type: Obscure.

7) Glass Type: As indicated on drawings.

4. Sash Balances:

a. In compliance with AAMA-902.

b. 1/2 inch flat coil spring balance.

c. Locking terminal and pivot bar system shall be designed to positively interlock, align sash and frame during installation and operation.

** NOTE TO SPECIFIER ** For opening exceeding 30-1/4 inches (762 mm) manufacturer recommends double locks. Delete sash lock options not required.

5.

6. Weatherstripping: In compliance with AAMA 701.2.

7. Screens: Extruded aluminum frame with BetterVue™ 18x16 charcoal finished fiberglass mesh.

** NOTE TO SPECIFIER ** Delete color options not required.

8.

9. Window Frame Color: Desert Sand.

10. Window Frame Color: As indicated on the drawings.

11. Simulated Divided Lite Grilles: Grilles applied to both sides of glazing.

** NOTE TO SPECIFIER ** Delete style options not required.

a.

b. Style: Colonial.

c. Style: Prairie.

d. Style: Queen Anne.

e. Style: Diamond.

f. Style: None.

g. Style: As indicated on drawings.

12. (GBG) Simulated Divided Lite Contour Grids Style: Grids between panes of glass.

** NOTE TO SPECIFIER ** Delete if not required.

a.

b. Style: Colonial.

c. Style: Prairie.

d. Style: None.

e. Style: As indicated on drawings.

13. Painting: Factory applied to exterior.

** NOTE TO SPECIFIER ** Delete exterior colors not required.

a.

b. Color: Dark Forest.

c. Color: Edgewood Blue.

d. Color: Pearl White.

e. Color: Cream White.

f. Color: Adobe.

g. Color: Earth Brown.

h. Color: Dark Brown.

i. Color: Bronze.

j. Color: Black.

k. Color: Fog.

l. Color: Barn Red.

m. Color: Boysenberry.

n. Color: Burgundy.

o. Color: Slate Blue.

p. Color: Gray.

q. Color: As indicated on drawings.

** NOTE TO SPECIFIER ** Delete exterior options not required.

14.

15. Exterior Casing: Applied, 3-1/2 inches by 1 inch.

16. Exterior Casing: Applied, 2 inches by 1-1/16 inch Brickmold 908.

17. Exterior Casing: As indicated on drawings.

** NOTE TO SPECIFIER ** Delete interior options not required.

18.

19. Interior: Applied extension jambs for 4-9/16 inch wall.

20. Interior: Applied extension jambs for 6-9/16 inch wall.

21. Interior: Applied 1/2 inch drywall return.

22. Interior: Applied 5/8 inch drywall return.

23. Interior: Applied 3/4 inch drywall return.

24. Interior: As indicated on drawings.

C. Window Performance Requirements:

1. Structural Rating: Certified Structural Report; H-R30.

a. Test Sizes: 48 inches by 72 inches (1219 mm by 1828 mm) in accordance with ANSI/AAMA/NWWDA 101/I.S.2.

** NOTE TO SPECIFIER ** Delete options not required.

b.

c. DP Performance: 20.

d. DP Performance: 25.

e. DP Performance: 30.

f. DP Performance: 35.

g. DP Performance: 40.

h. DP Performance: 45.

i. DP Performance: 50.

2. Forced Entry Resistance: In compliance with ASTM F 588, Type B, Grade 10.

3. Thermal Transmittance: NFRC 100.

** NOTE TO SPECIFIER ** The following value only apply to Low-E, argon filled, insulating glass. Refer to manufacturer’s literature for values associated with selection of glazing option other than Low-E, argon filled, and insulating glass. Delete if not required.

a.

1) U-Factor: 0.29.

2) SHGC: 0.29.

3) R-Value: 3.45.

** NOTE TO SPECIFIER ** Delete if not required.

12.

A. Replacement Single Casement Windows: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame and Sash: Multichambered aluminum reinforced vinyl frame and sash with miter cut and fusion-welded corners.

2. Hinges: Truth with E-Gard® finish.

3. Sash Locks: Sequentially locking multi-point type with single handle actuator.

4. Operator: Truth with E-Gard® finish.

5. Weatherstripping: In compliance with AAMA 701.2.

6. Screens: Extruded aluminum frame with BetterVue™ 20x20 charcoal finished fiberglass mesh.

7. Glazing: 3/4 inch nominal thickness insulated glass units; Duralite® composite spacer secured to sash frame using a dual adhesion closed cell foam fenestration glazing tape and rigid PVC glazing bead.

** NOTE TO SPECIFIER ** Delete options for glazing types not required.

a.

b. Glass Type: Low-E with Argon.

c. Glass Type: Low-E.

d. Glass Type: Tempered.

e. Glass Type: Laminated.

f. Glass Type: Obscure.

g. Glass Type: As indicated on drawings.

h. Glass Type: As selected by architect.

** NOTE TO SPECIFIER ** Delete color options not required.

8.

9. Color: Desert.

10. Color: Sand.

11. Color: As indicated on drawings.

12. Color: As selected by architect.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

13.

14. Contour Grids: Colonial.

15. Contour Grids: Prairie.

16. Contour Grids: Queen Anne.

17. Contour Grids: Diamond.

18. Contour Grids: As indicated on the drawings.

19. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

20.

21. Grid Between the Glass (GBG) Dividers: Colonial.

22. Grid Between the Glass (GBG) Dividers: Prairie.

23. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

24. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete color options not required.

25.

26. Exterior Painted Colors: Dark Forest.

27. Exterior Painted Colors: Edgewood Blue.

28. Exterior Painted Colors: Pearl.

29. Exterior Painted Colors: White.

30. Exterior Painted Colors: Cream White.

31. Exterior Painted Colors: Adobe.

32. Exterior Painted Colors: Earth Brown.

33. Exterior Painted Colors: Dark Brown.

34. Exterior Painted Colors: Bronze.

35. Exterior Painted Colors: Black.

36. Exterior Painted Colors: Fog.

37. Exterior Painted Colors: Barn Red.

38. Exterior Painted Colors: Boysenberry.

39. Exterior Painted Colors: Burgundy.

40. Exterior Painted Colors: Slate Blue.

41. Exterior Painted Colors: Gray.

42. Exterior Painted Colors: As indicated on the drawings.

43. Exterior Painted Colors: As selected by architect from manufacturer’s full range of exterior painting options.

** NOTE TO SPECIFIER ** Delete optional exterior casings if not required.

44.

45. Exterior Casings: Applied 3-1/2 x 1 (5/4).

46. Exterior Casings: Applied 2 x 1-1/16 Brickmould (908).

47. Exterior Casings: As indicated on the drawings.

48. Exterior Casings: As selected by architect from manufacturer’s full range of options.

** NOTE TO SPECIFIER ** Delete optional interior extension jamb if not required.

49.

50. Interior Extension Jamb: Applied extension jambs for 4-9/16.

51. Interior Extension Jamb: Applied extension jambs for 6-9/16 wall.

52. Interior Extension Jamb: As indicated on the drawings.

53. Interior Extension Jamb: As selected by architect from manufacturer’s full range of options.

** NOTE TO SPECIFIER ** Delete optional interior casings if not required.

54.

55. Applied Drywall Returns: Nominal 1/2 inch

56. Applied Drywall Returns: Nominal 5/8 inch

57. Applied Drywall Returns: Nominal 3/4 inch.

58. Applied Drywall Returns: As indicated on the drawings.

59. Applied Drywall Returns: As selected by architect from manufacturer’s full range of options.

C. Performance:

1. Structural Rating: C-40 - Test Size: 36 inches x 72 inches (914 mm x 1829 mm) in accordance with ANSI/AAMA/NWWDA 101/I.S.2.

2. See Certified Structural Report.

3. Forced Entry: Type B, Grade 30 in accordance with ASTM F 588.

** NOTE TO SPECIFIER ** All Spencer Walcott/Alliance windows shall be tested for energy efficiency and structural performance according to the most current testing protocols of The National Fenestration Rating Council, and ANSI/AAMA/WDMA 101/I.S standards. All Spencer Walcott/Alliance Casement windows will perform to the 2010 ENERGY STAR® Standards when glazed with “Stimulus-E”, argon filled, and insulating glass.

4.

a. Low-E with Argon:

1) U-Factor: 0.27.

2) SHGC: 0.29.

3) R-Value: 3.70.

** NOTE TO SPECIFIER ** Delete if not required.

13.

A. Replacement Double Casement Windows: Provide units manufactured by Mathews Brothers Company from the following product line, in sizes as indicated on the drawings.

** NOTE TO SPECIFIER ** Delete product lines not required.

1.

B. Components:

1. Frame and Sash: Multichambered aluminum reinforced vinyl frame and sash with miter cut and fusion-welded corners.

2. Hinges: Truth with E-Gard® finish.

3. Sash Locks: Sequentially locking multi-point type with single handle actuator.

4. Operator: Truth with E-Gard® finish.

5. Weatherstripping: In compliance with AAMA 701.2.

6. Screens: Extruded aluminum frame with BetterVue™ 20x20 charcoal finished fiberglass mesh.

7. Glazing: 3/4 inch nominal thickness insulated glass units; Duralite® composite spacer secured to sash frame using a dual adhesion closed cell foam fenestration glazing tape and rigid PVC glazing bead.

** NOTE TO SPECIFIER ** Delete options for glazing types not required.

a.

b. Glass Type: Low-E with Argon.

c. Glass Type: Low-E.

d. Glass Type: Tempered.

e. Glass Type: Laminated.

f. Glass Type: Obscure.

g. Glass Type: As indicated on drawings.

h. Glass Type: As selected by architect.

** NOTE TO SPECIFIER ** Delete color options not required.

8.

9. Color: Desert.

10. Color: Sand.

11. Color: As indicated on drawings.

12. Color: As selected by architect.

** NOTE TO SPECIFIER ** Delete contour grid options not required.

13.

14. Contour Grids: Colonial.

15. Contour Grids: Prairie.

16. Contour Grids: Queen Anne.

17. Contour Grids: Diamond.

18. Contour Grids: As indicated on the drawings.

19. Contour Grids: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete grid between the glass (GBG) options not required.

20.

21. Grid Between the Glass (GBG) Dividers: Colonial.

22. Grid Between the Glass (GBG) Dividers: Prairie.

23. Grid Between the Glass (GBG) Dividers: As indicated on the drawings.

24. Grid Between the Glass (GBG) Dividers: As selected by architect from manufacturer’s full range of contour grid options.

** NOTE TO SPECIFIER ** Delete color options not required.

25.

26. Exterior Painted Colors: Dark Forest.

27. Exterior Painted Colors: Edgewood Blue.

28. Exterior Painted Colors: Pearl.

29. Exterior Painted Colors: White.

30. Exterior Painted Colors: Cream White.

31. Exterior Painted Colors: Adobe.

32. Exterior Painted Colors: Earth Brown.

33. Exterior Painted Colors: Dark Brown.

34. Exterior Painted Colors: Bronze.

35. Exterior Painted Colors: Black.

36. Exterior Painted Colors: Fog.

37. Exterior Painted Colors: Barn Red.

38. Exterior Painted Colors: Boysenberry.

39. Exterior Painted Colors: Burgundy.

40. Exterior Painted Colors: Slate Blue.

41. Exterior Painted Colors: Gray.

42. Exterior Painted Colors: As indicated on the drawings.

43. Exterior Painted Colors: As selected by architect from manufacturer’s full range of exterior painting options.

** NOTE TO SPECIFIER ** Delete optional exterior casings if not required.

44.

45. Exterior Casings: Applied 3-1/2 x 1 (5/4).

46. Exterior Casings: Applied 2 x 1-1/16 Brickmould (908).

47. Exterior Casings: As indicated on the drawings.

48. Exterior Casings: As selected by architect from manufacturer’s full range of options.

** NOTE TO SPECIFIER ** Delete optional interior extension jamb if not required.

49.

50. Interior Extension Jamb: Applied extension jambs, 4-9/16.

51. Interior Extension Jamb: Applied extension jambs, 6-9/16 wall.

52. Interior Extension Jamb: As indicated on the drawings.

53. Interior Extension Jamb: As selected by architect from manufacturer’s full range of options.

** NOTE TO SPECIFIER ** Delete optional interior casings if not required.

54.

55. Applied Drywall Returns: Nominal 1/2 inch.

56. Applied Drywall Returns: Nominal 5/8 inch.

57. Applied Drywall Returns: Nominal 3/4 inch.

58. Applied Drywall Returns: As indicated on the drawings.

59. Applied Drywall Returns: As selected by architect from manufacturer’s full range of options.

C. Performance.

1. Structural Rating: Varies by size and configuration. See Certified Structural Report.

2. Forced Entry: Type B, Grade 30 in accordance with ASTM F 588.

** NOTE TO SPECIFIER ** All Spencer Walcott/Alliance Windows shall be tested for energy efficiency and structural performance according to the most current testing protocols of The National Fenestration Council and ANSI/AAMA/WDMA 101/ I.S standards. All Spencer Walcott/Alliance casement windows will perform to the 2010 ENERGY STAR® Standards when glazed with “Stimulus-E”, argon filled, insulated glass. Delete if not required.

3.

a. Low-E with Argon:

1) U-Factor: 0.27.

2) SHGC: 0.29.

3) R-Value: 3.70.

** NOTE TO SPECIFIER ** Delete if not required.

14.

A. Provide accessories as specified with each window and as indicated below.

** NOTE TO SPECIFIER ** Delete accessories not required.

1.

2. Dry Wall or Jamb Extension Guide: As manufactured by Mathews Brothers Company.

3. Perimeter Joint Sealant: Type as recommended in printed installation instructions from manufacturer for use between nail fin and exterior sheathing.

4. Insulation: Batt Insulation for use between window frame and rough opening. Do not use Expanding Foam Insulation.

3 EXECUTION

1. EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. Verify rough opening size is of sufficient size to receive window unit and complies with manufacturer’s requirements for opening clearances. Verify that sill plate is level.

C. If rough opening preparation is the responsibility of another installer, notify architect of unsatisfactory preparation before proceeding. Beginning of installation constitutes acceptance of existing conditions.

2. PREPARATION

A. Clean surfaces thoroughly prior to installation. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3. INSTALLATION

A. Install in accordance with manufacturer’s instructions including the following:

1. Apply sealant around perimeter of window unit between nail fin and exterior sheathing of wall in accordance with manufacturer’s instructions.

2. Install window unit level, plumb and square. Center window unit in opening and secure window unit by nailing through nail fin and screw through jambs as indicated in manufacturer’s instructions.

3. Flash window in accordance with AAMA’s “Standard Practice for Installation of Windows with a Mounting Flange in Stud Frame Construction”.

4. Insulate between window frame and rough opening with insulation in accordance with manufacturer’s instructions.

5. Adjust units for smooth operation without binding or racking.

6. Adjust sash locks and screens for smooth operation.

4. CLEANING AND PROTECTION

A. Clean soiled surfaces and glass in accordance with manufacturer’s instruction prior to substantial completion.

B. Protect installed products until completion of project.

C. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download