Overview - dlcdnets.asus.com

[Pages:18]Overview

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

To assist with the installation process of the Software Upgrade Assistant tool for your Asus device, the below requirements and instructions are listed below.

System Requirements: ? Operating System: Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 ? Personal Computer , USB Cable and handset

Software Upgrade Assistant Installation for Windows Users

1. Connect the device to the computer with the USB Cable , if your windows autoplay feature enabled, A CD Drive will be autoplayed, Click on "Run VZW_Software_Update_Assistant.exe" option.

2. If the latest Software Upgrade Assistant have already been installed, user will get this dialog and click on the Close button to exit.

Installing

1. Confirm the end user's license by clicking on the Accept button. The downloading of the Software Upgrade Assistant from server will begin automatically.

2. Once the installation of the Software Upgrade Assistant have been downloaded, the installation page of the Software is automatically pop-up, you can select the language version you want to install, and click "Next".

3. Click the NEXT button to enter the Selece Destination Location page.If you want to select a different folder,click Browse. (if you already have a older version installed, the Browse button is disabled )

4. Click the NEXT button to enter the Installing page.Once the software have been installed,the complete page will be displayed.When user clicks the FINISH button ,the Software Upgrade Assistant will be started automatically.

Updating

1. Run the Software Upgrade Assistant and connect a device to the USB. Select "System update" mode from device USB, Once the valid device is detected,the NEXT button becomes active.

2. If more than two devices are connected to the USB, the "Which device" page shows up and select the device that you wanted to Update.

3. Once a device is selected,click NEXT button to enter the "Checking for updates" page. If the updates available,it will automatically enter the "Ready to start" Page.

4. If the Update Image was not pre-downloaded ,the Update Image will be downloaded in this stage.Progress bar of the downloading is displayed. User is able to cancel the downloading either.

5. Once the Update Image have been downloaded,Software Upgrade Assistant will start to Updating the device automatically.

6. Once the Updating have been done, it will automatically enter the "Update Successful" page.At the same time,the device will be restarted.Click the EXIT button to close the program.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download