Enabling WMDC in Windows 10 Install Windows Mobile Device ...

Enabling WMDC in Windows 10

1. Install Windows Mobile Device Center

2. Open Command Prompt (as admin)

a. Execute two commands

i. REG ADD HKLM\SYSTEM\CurrentControlSet\Services\RapiMgr /v

SvcHostSplitDisable /t REG_DWORD /d 1 /f

ii. REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WcesComm /v

SvcHostSplitDisable /t REG_DWORD /d 1 /f

3. Go to Services

4. Stop and change log on properties to ¡°Log in as¡± Local System Acount to the services below:

a. Windows Mobile-2003-based device connectivity

b. Windows Mobile-based device connectivity

5. Restart both services

Devices should now be able to connect via USB to your Windows 10 PC.

Note:

It has been found that the user may need to disable ¡°Advanced Network Functionality¡± on mobile

device.

1. Start > Settings > Connections > USB to PC > Uncheck ¡°Enable advanced network functionality¡±

150 Smokerise Drive Wadsworth, OH 44281

Ph: 330-725-7766 Fx: 330-725-7799

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download