WER300N Wireless 300Mbps Mini Router / Extender

[Pages:12]WER300N Wireless 300Mbps Mini Router / Extender

User Manual Version 1.0

WER300N

1 Introduction

1.1 Product Features WIFI-Extender/Router Compatible with 802.11 b/g/n 110 - 230 VAC Mini size design Wi-Fi speed up to 300Mbps Maximum WLAN security

Package Contents WU300N Wireless USB Adapter Installation CD (Drivers, Utility, User's Manual) QUG and Warranty

2 Network Installation Procedure

User Manual

Typical wireless setup at home

? You will need broadband Internet access (a ADSL, Cable Modem line into your home or office).

? Consult with your ADSL or Cable Modem provider for proper installation of the modem.

? Connect the ADSL or Cable modem to the Wireless N Mini Router. ? Plug the power plug of the Router in an electrical wall socket. ? Adding computers to the Wireless N Mini Router.

Note: You can reset your WiFi Router to default setting by press and hold the 'RESET* button inside the tiny hole for 8 ~10 seconds. You can use this if you forget your password.

2

WER300N

User Manual

2.1 WER300N Configuration You can configure the Wireless-N Mini Router by connecting it with your computer/laptop with the enclosed RJ45 cable or wirelessly.

? Plug the Wireless-N Mini Router to a wall socket. ? Click on the network icon on the right bottom of your desktop. You will find the

signal from the Wireless-N (for wireless connection). ? Open web browser and type in the browser's address box.

This number is the default IP address for this device. ? The login screen below will appear. Enter the "User Name" and "Password" then

click "OK" to login. The default User name is "admin" and Password is "admin"

? After logging in, you will see the web page below:

You can click the Wizard's menu to quickly configure your Router. You can configure the device by selecting one of the following modes of operation:

? Router ? AP (Access Point) ? Repeater or extender ? WISP

3

WER300N

User Manual

Mode Description

The router connects to the to the ADSL-Modem router by using the WAN port. Router Other devices can connect to this router by wireless connection or connected

the its LAN port by wire.

AP

This router can connect to the ADSL-Modem router by using the LAN port. Other devices connect to this router by wireless connection

Repeater

This router can connect to the ADSL-Modem router wirelessly and extend its signal. Other devices connect to this router by wired or wireless connection

WISP

This router can connect to the ADSL-Modem router by wireless connection. At the same time it can extend wireless signal for other devices' connection

Note: Please check whether the Wireless-N Mini Router is in factory default settings. You can reset the Wireless-N Mini Router by pressing the reset button for 10 seconds

2.1.1 Router Mode

? Choose your WAN Connection Type ? If Dynamic IP is selected, the Router gets the IP address automatically from the

DHCP server or the ISP. No configuration should be set and you can go on with the wireless configuration. ? If ADSL DiaL up (PPPoE) is selected, please enter the User Name and Password from your ISP, These fields are case-sensitive.

4

WER300N

User Manual

? Set the wireless parameter. It's recommended that you rename an SSID, choose a Security Mode and enter a Key.

SSID

the "SSID" of your wireless network.

Channel Auto (recommend)

Setup the wireless security and encryption to prevent from

Security type

unauthorized access and monitoring. Supports 64/128-bit WEP, WPA, WPA2, WPA/WPA2 encryption

methods.

Security key the "Password" of your wireless network.

Click 'Save&Reboot' button to reboot the device. 2.1.2 AP Mode

Channel Security type Security key

the "SSID" of your wireless network.

Auto (recommend)

Setup the wireless security and encryption to prevent from unauthorized access and monitoring. Supports 64/128-bit WEP, WPA, WPA2, WPAWPA2 encryption methods.

the "Password" of your wireless network.

Click 'Save&Reboot' button to reboot the device.

5

WER300N 2.2 Repeater / Extender Mode

User Manual

? Select the SSID of the your network and click Select.

? The target network SSID will be automatically filled ? Enter your password key of your network Click 'Save&Reboot' button to reboot the device.

6

WER300N

User Manual

2.3 WISP Mode

In this mode, all Ethernet ports are bridged together and the wireless client will connect to ISP access point

? Select the SSID of the your network and click Select.

? The target network SSID will be automatically filled ? Enter your password key of your network Click 'Save&Reboot' button to reboot the device.

7

WER300N

User Manual

2.4 Change Administrator Passwords The default user name and password of the WER300N device is "admin'

To change password, please follow the following instructions: Please click 'Administrator' menu on the web management interface, the following message will be displayed on your web browser:

To change the password, fill in the Username and Password and Click "Apply" button, The device will log off. 2.5 Firmware Upgrade The system software used by this device is called as 'firmware'. To upgrade to a new firmware select "Firmware" on the upper right corner. You will see the following screen

8

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download