WORKSHOP 8 Content: Follows FineWoodworking.com video ...

WORKSHOP 8 Building a Shaker Nightstand Date/Time: Saturday; Xtember tbd, 9 am to 12 noon Location: Mentor's workshop Mentors: tbd Content: Follows video "Getting Started in Woodworking" Season 3, Building a Shaker Nightstand, Introduction, Session 0; Save Money by Buying Rough Lumber, Session 1; Mill Your Own Lumber, Session 2 Tapering Legs on the Table Saw, Session 3

Description: Introduction;.

Review table plans and cutlist..

Buying Rough Cut Lumber;

Discuss tips on how to purchase rough cut boards.

Milling the Lumber; Layout table pieces on rough boards. Cut rough boards to slightly oversize pieces (circular or chop saw and band saw) Mill out warpage at jointer (face planing) and plane to final thickness (thickness paner). Rip cut and cross cut pieces to final size (table saw).

WORKSHOP 8 (concluded) Description (concluded); Tapering Leg Stock; Build a table saw tapering jig; Layout tapering lines on the stock; Taper the legs and sand them smooth. Preparation:

1. Register with Bob Mills at 248-535-6718 or 248-540-8658 2. View the "Getting Started in Woodworking" videos, Season 3, Sessions 0, 1, 2 & 3 at

3. Download and review the plans for "Nightstand with Shelf" from

4. Bring sufficient rough lumber to build the table. If necessary, contact the mentor to set up a time to purchase rough cut lumber for this project.

.

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download