PDF Manufacturing with Intel® Stratix® 10 Field Programmable Gate ...
Manufacturing with Intel? Stratix 10 Field Programmable Gate Arrays
Revision 1.1 Q1 2019
The information contained in this document is for reference only. Manufacturing processes are unique, and may require unique solutions to ensure an acceptable level of quality, reliability, and manufacturing yield. Due to differences in equipment and materials, and product design, further process parameter modifications/optimization may be required to meet your quality, reliability, and manufacturing yield requirements.
Legal Disclaimer
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS, COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS. Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and noninfringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade. The products described may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter disclosed herein. Warning: Altering PC clock or memory frequency and/or voltage may (i) reduce system stability and use life of the system, memory and processor; (ii) cause the processor and other system components to fail; (iii) cause reductions in system performance; (iv) cause additional heat or other damage; and (v) affect system data integrity. Intel assumes no responsibility that the memory, included if used with altered clock frequencies and/or voltages, will be fit for any particular purpose. Check with memory manufacturer for warranty and additional details. No computer system can be absolutely secure. Intel does not assume any liability for lost or stolen data or systems or any damages resulting from such losses. Intel technologies may require enabled hardware, specific software, or services activation. Check with your system manufacturer or retailer. Intel technologies' features and benefits depend on system configuration and may require enabled hardware, software or service activation. Learn more at , or from the OEM or retailer. No computer system can be absolutely secure. Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or visit design/literature.htm. Any forecasts of goods and services needed for Intel's operations are provided for discussion purposes only. Intel will have no liability to make any purchase in connection with forecasts published in this document. Statements in this document that refer to Intel's plans and expectations for the quarter, the year, and the future, are forward-looking statements that involve a number of risks and uncertainties. A detailed discussion of the factors that could affect Intel's results and plans is included in Intel's SEC filings, including the annual report on Form 10-K. All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product specifications and roadmaps Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries. *Other names and brands may be claimed as the property of others.
? 2019 Intel Corporation
CQR | Customer Quality & Regulatory
2
Manufacturing Advantage Services (MAS)
Introduction
? This Manufacturing Advantage Services (MAS) course shares Intel knowledge to facilitate customer manufacturing excellence as an advantage service.
Note: Intel is a trademark of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
CQR | Customer Quality & Regulatory
3
Manufacturing Advantage Services (MAS)
Module
Page Markings and Navigation Aids
Click on the house to go to a Table of Contents page.
These headers are links to modules.
CQR | Customer Quality & Regulatory
Manufacturing Advantage Services (MAS)
4
3
4
Revision History
? Revision 1.0: ? Original Document Release
? Revision 1.1: ? Document title update
CQR | Customer Quality & Regulatory
5
Manufacturing Advantage Services (MAS)
Module 1: Component Attributes and Drawings
Manufacturing with Intel? Stratix 10 Field Programmable Gate Arrays
MAS Revision 1.1 Q1 2019
CQR | Customer Quality & Regulatory
6
Manufacturing Advantage Services (MAS)
Overview ? Table of Contents
This course is divided into the following modules:
Module 1:
Component Attributes, Drawings and Land Pattern (PCB Pad)
1.1 Recommended PCB Pad Patterns
1.2 Package Side Details (Informational)
1.3 Package Attributes
1.4 Board Side Recommendations
Module 2:
Manufacturing Guidelines
2.1 SMT Assembly Process Recommendations
2.2 Post Reflow Cleaning Risk
2.3 Proposed Temporary Sealing Flip Chip Air Vent Process
2.4 SMT Rework Process Recommendations
2.5 Thermocouple Locations for Rework Thermal Reflow Profile
2.6 Intel? Lead-Free Rework Thermo Profile Graphic (for Stratix 10)
2.7 SMT Stencil Recommendations
2.7.1-.6 SMT & Rework Mini- Stencil F35, F43, F48, F50, F53, F55
2.8 X-Ray Exposure Time Recommendation*
Module 3:
References
3.1 Reference Documents 3.2 Intel? Learning Network access Information 3.3 Resource Design Center access Information
CQR | Customer Quality & Regulatory
7
Manufacturing Advantage Services (MAS)
1.1 Recommended PCB Pad Patterns
Module 1
F43 Package (42x42) - 4 = 1760 balls
F50 Package (49x49) - 4 = 2397 balls
F55 Package (54x54) - 4 = 2912 balls
42x42 grid: 42.5x42.5mm package
49x49 grid: 50x50mm package
54x54 grid: 55x55mm package
Pad Yellow Circle Green Circle
Definition Metal defined 20 mils (0.51 mm) round pad. Solder Mask Defined ? 20 mils (0.51 mm) SRO on a 24 mils (0.61 mm) round pad
CQR | Customer Quality & Regulatory
8
Manufacturing Advantage Services (MAS)
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- pdf lecture 29 productivity and process yield nptel
- pdf the relevance of the yield stress tensile stress ratio in
- pdf manufacturing insights report
- pdf yield analysis and optimization
- pdf semiconductor yield modeling using generalized linear models
- pdf yield modeling and analysis prof robert c leachman ieor 130
- pdf yield learning in integrated circuit package assembly
- pdf ee290h special issues in semiconductor manufacturing
- pdf good manufacturing practice guideline for pharmaceutical products
- pdf overall yield of processes
Related searches
- product development phase gate process
- russian keyboard virtual gate 2
- cholecystitis with cholelithiasis icd 10 code
- dementia with psychosis icd 10 code
- adjustment disorder with anxiety icd 10 code
- logic gate truth table calculator
- 10 inch plastic field tile
- pneumonia with sepsis icd 10 code
- uti with macrobid icd 10 code
- pneumonia with hypoxia icd 10 code
- copd with asthma icd 10 code
- words with more than 10 letters