ASUS RT-AC5300 Fibre configuration

[Pages:1]ASUS RT-AC5300 Fibre configuration

Log into the Gateway:

1. Connect your device to the router (preferably hardwired) 2. Open a Web Browser 3. In the web browsers address bar type: 4. Default Username: admin 5. Default Password: admin * 6. This should then give access to the routers user interface. *If the default password does not work and you cannot remember the changed password, you may need to factory reset the router by hushing and holding the inset reset button for 10 seconds.

How to add correct settings for the NOW network:

How to change the correct settings: 1. From the Advanced menu select: WAN. This will open a page of settings. Ensure the settings match what's below. 2. WAN connection type: PPPoE 3. Enable WAN: Yes 4. Enable NAT: Yes 5. Enabled UPnP: Yes 6. Get the WAN IP Automatically: Yes 7. Connect to DNS Server automatically: Yes 8. PPP Username: contact now for your PPPOE Username 9. PPP password: pass123 10. Disconnect after time of inactivity: 0 11. MTU: 1492 12. MTU: 1492 13. Service name: Leave blank 14. Additional pppd options: leave blank 15. Enabled PPP Echo detect: Yes 16. Don't change any other options 17. Click Apply.

You should now be connected on Fibre! If you don't have internet access give NOW Technical Support a call.

Aug - 2017

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download