MOTOR HP & AMPS ELECTRICAL WIRE, FUSE & BREAKER SIZES
[Pages:1]ENGINEERING DATA SHEET DATE SUPERSEDES
MOTOR HP & AMPS ELECTRICAL WIRE, FUSE & BREAKER SIZES
C1-2-2-345 January 2000 CE103
The following table gives wire, breaker and fuse sizes based on horsepower, voltage and phase. Motor full load amps are taken from motors currently used by Champion. The wire, breaker and fuse sizes are provided as a reference for the installer and are based on the 1996 National Electrical Code. All wiring should be performed by a licensed electrician or electrical contractor and must meet all applicable codes for the area where installed.
Motor HP
Voltage
Typical Motor F.L.A.
?
115V
? 208V / 230V
?
115V
? 208V/ 230V
1
115V
1 208V / 230V
1?
115V
1? 208V / 230V
2
115V
2 208V / 230V
3
115V
3 208V / 230V
5 208V / 230V
7? 208V / 230V
8.4 4.4 / 4.2
11 5.5 / 5.4
12.4 6.5 / 6.2
18 9.5 / 9
24 12.6 / 12
32 16.8 / 16 25.5 / 24 33 / 31
1? 200V / 230V
1?
460V
2 200V / 230V
2
460V
3 200V / 230V
3
460V
5 200V / 230V
5
460V
7? 200V / 230V
7?
460V
10 200V / 230V
10
460V
15 200V / 230V
15
460V
20 200V / 230V
20
460V
25 200V / 230V
25
460V
30 200V / 230V
30
460V
5 / 4.8 2.4
6.8 / 6.4 3.2
8.5 / 8 4
14.8 / 14 7
23 / 22 11
30 / 28 14
44.8 / 39 19.5
61 / 53 26.5
74 / 65 32.5
87 / 76 38
Copper Conductor 75? C Rating ? 30? C Ambient
Wire Size Awg No.
Dual Element, Time Delay UL Class RK5 Fuse
(Used with Properly Sized O/L Relay)
SINGLE PHASE UNITS
14
15A
14
8A / 7A
12
15A
14
12A / 10A
12
20A
14
12A / 10A
10
20A
14
15A / 10A
10
35A
14
20A
8
50A
10
30A / 25A
8
40A
6
50A
THREE PHASE UNITS
14 14 14 14 14 14 10 / 12 14 8 / 10 14 8 12 6 10 4 8 3 / 4 8 2 / 3 6
8A 4A 12A / 10A 5A 12A 7A 25A 12A 40A / 35A 15A 50A / 45A 20A 75A / 60A 30A 100A / 90A 45A 125A / 110A 50A 150A / 125A 60A
Circuit Breaker (Instantaneous Trip
Circuit Breaker) Continuous Amp Rating
15A 7A 15A 15A 15A 15A 30A 15A 30A 15A 50A 30A 50A / 30A 50A
7A 3A 15A 7A 15A 7A 30A 15A 30A 15A 50A 30A 100A / 50A 30A 100A 50A 100A 50A 150A / 100A 50A
1. To ensure proper coordination between the heater element and short circuit protective device, consult the heater table packaged with the motor controller.
2. Maximum branch-circuit, short-circuit protective device ratings shown in the manufacturer's overload relay table for use with a motor controller, or otherwise marked on the equipment, shall not be exceeded.
Copyright ? 2000 Gardner Denver, Inc.
EDS C1-2-2-345 P1/1
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- motor hp amps electrical wire fuse breaker sizes
- nema motor dimensions reference chart
- integrated panel 30 hp rotary phase converter
- determining electric motor load and efficiency
- single phase motors
- motor amp draw and required breaker single phase full
- constant speed motors single phase induction single phase
- motor current rating chart sprecher schuh
- stanford university
- section 22 05 12 general motor requirements for
Related searches
- direct burial electrical wire chart
- hp to amps chart
- hp to amps converter
- motor hp sizes chart
- breaker sizes chart
- wire size for 40 amps 240 volts
- electrical breaker sizes list
- 30 amp breaker wire size
- nec circuit breaker sizes table
- wire size for 50 amps 240v
- 40 amp breaker wire size
- electrical wire size chart