GENERAL MOTOR CORPORATION - Engine Parts Warehouse

Year

CID Bore Lit. Vin#

Description

Short

Block Crank Head Crank

Block Complete Casting Forging Casting Kit No.

GENERAL MOTOR CORPORATION

The following information should generally enable you to identify the make or manufacturer of GMC 350 or 455 C.I.D. engines from 1975.

If the engine identification number is stamped on the driver's side of the block or head surface between the first and second cylinder, the engine is a Buick built 350 C.I.D. engine. Should the code be stamped between the third and fourth cylinder, it is a Buick built 455 C.I.D. engine. In 1975 only, engines are identified by the fifth digit on the vehicle identification tag.

If the serial number is stamped below the head on front of block on passenger side, the engine is a Chevrolet built engine.

Engines having the identification on the oil filler tube are Oldsmobile engines.

If identification code is stamped on a machined pan in front of block on passenger side, the engine is a Pontiac built engine.

Always order replacement engines by the manufacturer of the engine, not the make of the automobile.

BUICK 4, 6 & V6 "OHV" & "OHC"

Apollo, Centurian, Century, Coachbuilder Wagon, Deluxe, Electra, Gran Sport, Grand National, LeSabre, Park Avenue, Reatta, Regal, Riviera, Skyhawk, Skylark, Somerset Regal, Special Sportwagon

SEE NOTE AT END OF BUICK V8 SECTION

1990-89 262 4.00 V6, F.I., Roller Tappets,

4.3

Z W/Detonation Sensor

313600

313610

10105867 10105865 14084768 10055480

1990-87 262 4.00 V6, F.I., Roller Tappets

4.3

Z W/O Detonation Sensor

313500

313510

10066011 14088640 14094768

1986

262 4.00 V6, Flat Tappets, One Piece

4.3

Z Rear Seal, Carbureted

125400

125410

14088553

14088640

14079268 14079248 14131996

1986

262 4.00 V6, Flat Tappets, One Piece

4.3

Z Rear Seal, F.I.

125401

125411

14088553

14088640

14079268 14079248 14131996

1985

262 4.00 V6, Two Piece Rear Seal

4.3

Z

125200

125210

14071177 1174N

14079248 14079268

1984-80

252 3.965 V6, Crank May Have 5/8" or

106600

4.1

4 3/4" Pulley Bolt Hole,

Detonation Sensor Hole in Block

106713

25506484 25505553 25514291

1260877 1257125 1255674

25506293 25518445 25505900

1982-80

252 3.965 V6, Crank May Have 5/8" or

106500

4.1

4 3/4" Pulley Bolt Hole, W/O

Detonation Sensor Hole in Block

106513

25506484 25505553 25514291

1260877 1257125 1255674

25506293 25505900 25504443

1976-75 1976-75 1976-73 1976-73 1972-68

250 3.875 Integral Intake Manifold, W/O 122800A 129610A#

4.1

D Air Conditioning, Must Specify

Cyl. Head Casting #, 1 BC W/A.I.R. ORDER 129613A

250 3.875 Integral Intake Manifold, W/Air 127500A 127610A#

4.1

D Conditioning, Must Specify Cyl.

Head Casting #, 1 BC W/A.I.R. ORDER 127613A

250 3.875 W/O Integral Intake Manifold, 122800A 122810A

4.1

D W/O Air Conditioning

W/A.I.R. ORDER 122813A

250 3.875 W/O Integral Intake Manifold, 127500A 127510A

4.1

D W/Air Conditioning

W/A.I.R. ORDER 127513A

250 3.875 W/A.I.R. ORDER 129713A

122500A 129710A

4.1

D

366855 348675 328575

366855 348675 473483

328575 2775308

366855 348675

3877178 3850817

3876802 3876802 3876802 3876802 3876802

355795 370696 377133 14002012

355795 370696 14002012 377133

3962084 3927763 3895052

3962084 3927763 3895052

3927763 3895052

A - These engines have pedal linkage location "A" and dipstick location "3". See drawing on page 64.

# - Indicates factory inspection of core, before credit is issued.

22128 22128 22128 22128 22127 20110 20110 22113

22113

22113 22113 22113

38

Year

CID Bore Lit. Vin#

Description

Short

Block Crank Head Crank

Block Complete Casting Forging Casting Kit No.

BUICK 4, 6 & V6 "OHV" & "OHC" Continued

SEE NOTE AT END OF BUICK V8 SECTION

1996-95 231 3.80 V6, Roller Tappets, F.I., OHV 108100

3.8

L W/Balance Shafts, Roller

1995

231 3.80 V6, Roller Tappets, W/Balance 109400

3.8

K Shafts, MFI, FWD, 6" Dia. C/S,

Cross Bolt Mains

1995

231 3.80 V6, Roller Tappets, F.I., OHV 109800

3.8

1 Supercharged, W/Bal. Shafts

1994

231 3.80 V6, Roller Tappets, OHV,

109300

3.8

L W/Balance Shafts

1994

231 3.80 V6, Roller Tappets, F.I., OHV 109700

3.8

1 Supercharged, W/Bal. Shafts

1993-91 231 3.80 V6, Roller Tappets,

109600

3.8

1 Supercharged, W/Bal. Shafts

1993

231 3.80 V6, Roller Tappets, F.I., OHV, 109200

3.8

L W/Balance Shafts, W/O PCV

Valve on Right Intake of Head

1992-91 231 3.80 V6, Roller Tappets,

108700

3.8

C W/Balance Shafts

1992-90 231 3.80 V6, Roller Tappets, W/Balance 109100

3.8

L Shafts, W/PCV Valve on Right

Intake of Head

1990-88 231 3.80 V6, FWD, Roller Tappets,

108800

3.8

C W/Balance Shafts

1988-86 231 3.80 V6, FWD, Roller Tappets,7/16"

3.8

3 Dipstick Tube Hole in Block

1988-84 231 3.80 V6, RWD, Crankshaft may have

3.8

A 5/8" or 3/4" Pulley Bolt Hole,

Detonation Sensor Hole in

Block, 20 Bolt Oil Pan Rail

1987-86 231 3.80 V6, FWD, Roller Tappets,3/8"

3.8

3 Dipstick Tube Hole in Block

1987-84 231 3.80 V6, RWD, Turbocharged,

3.8

7 Detonation Sensor Hole in

Block, Oil Return Hole for

Turbo in Front of Block,

Sequential P.F.I.

1986

231 3.80 V6, FWD, Flat Tappets

3.8

B

1985-84 231 3.80 V6, FWD, 14 Bolt Oil Pan Rail

3.8

3

1985-84 231 3.80 V6, FWD, 20 Bolt Oil Pan Rail

3.8

3 Flush Head Bolt Hole Threads

1985-84 231 3.80 V6, FWD, 20 Bolt Oil Pan Rail

3.8

3 Recessed Head Bolt Thread

1985-81 231 3.80 V6, RWD, M.F.I., Crankshaft

3.8

A may have 5/8" or 3/4" Pulley

Bolt Hole, Detonation Sensor

Hole in Block, 14 Bolt Oil Pan

1984-79 231 3.80 V6, RWD, Turbocharged,

3.8

9 Crankshaft may have 5/8" or

3/4" Pulley Bolt Hole,

Detonation Sensor Hole in

Block, Oil Return Hole for

Turbo in Block, 14 Bolt Oil Pan

1984-79 231 3.80 V6, RWD, Turbocharged,

3.8

9 Crankshaft may have 5/8" or

3/4" Pulley Bolt Hole, W/O

Detonation Sensor, 14 Bolt Oil

Pan Rail

W/AIR ORDER 106113

1983-79 231 3.80 V6, Crankshaft may have 5/8" or

3.8

A 3/4" Pulley Bolt Hole, W/O

Detonation Sensor

W/AIR ORDER 105813

* Do not come with oil pump or kit.

A - Head comes with or without PCV valve hole.

B - Pan Bolt ?" or 5/16".

108200 105500 107200 106800

107000 104900 105000 105001 104400 106000

106100

105400

108110* 109410*

109810*B 109310*B 109710* 109610* 109910*

108710* 109110*

108810*

108210* 105513*

24502287 24502481 24502287

737 4737 2170 4737

24502441 441

737 4737 4737

25532674 24502441 24502134

737 4737 4737

25532674 25532674

737 4737 4737

25531617 113 35532646 502

25529898 25528801 25524140 25520329

267 1260877

2136A 2136A

20114 20114

2136A

20114

136A

20108

20112

2136A

20112

2136A 0619A

20108

2450A 0619A

4250A 3485A

20108 20108

25539723 25533485 4250 25524248 25527515 25518445

20106

20107 20110

107210* 106813*

25526111 267 25528801 25526109 229

25524248 25527515 25518445

20107 20110

107010* 104913* 105013* 105013* 104413*

106313*

25526111 25528801 25520043 25512617 25524139 25520333 25524139 25520333 25506818 25514290 25505554 25520040 25506818 25514290 25506397

267 267 267 267 1260877 1257125

1260877 1257125

25524248 25527515 25518445

20107 20107

25518445 20107

25518445 20107

25506293 25504443 1261377 25518445

25506293 25505900 25504443 25518445

20110 20110

106110*

25506818 1260877 25506397 1257125

25506293 25504443 25505900 25518445

20110

105810*

25506818 25506397 25505554 1261787

1260877 1257125 1255674

25506293 25504443 1262098 1261377

20110

39

Year

CID Bore Lit. Vin#

Description

Short

Block Crank Head Crank

Block Complete Casting Forging Casting Kit No.

BUICK 4, 6 & V6 "OHV" & "OHC" Continued

SEE NOTE AT END OF BUICK V8 SECTION

1978-77 231 3.80 V6, Split Rod Pin Crankshaft,

3.8

A W/O Detonation Sensor, Even

Fire Engine

W/AIR ORDER 105413

1978

231 3.80 V6, Turbocharged, W/O

3.8

3 Detonation Sensor, Oil Return

Hole for Turbo in Int. Manifold,

Crankshaft May Have 5/8" or

3/4" Pulley Bolt Hole

1977

231 3.80 V6, Straight Rod Pin Crankshaft,

3.8

C Odd Fire Engine

105401 106101 105200

105410 106213 105210*

1254083 1255862 1261438

1254083 1261438

1254083 1255862 1261438

1976-75 231 3.80 V6

3.8

C

104500

104510*

1249432

1967-64 225 3.75 V6 3.7

102100

1993 1992 1991 1990-89 1979 1978 1995-94 1994 1993-92

204 3.70 V6, FWD, OHV, F.I.,

3.3

N Roller Tappets

102900

204 3.70 V6, FWD, OHV, M.F.I.,

3.3

N Roller Tappets

102900

204 3.70 V6, FWD, OHV, M.F.I., Roller 102700

3.3

N Tappets, 5/16" Flywheel Bolts

204 3.70 V6, Century, FWD, OHV,

3.3

N M.F.I.

103000

196 3.50 V6

3.2

C

105600

196 3.50 V6

3.2

C

105601

189 3.503 V6, FWD, Roller Tappets,

3.1

M Alum. Heads

312200

189 3.503 V6, FWD, Flat Tappets

3.1

T

323900

189 3.503 V6, FWD, Flat Tappets, Alum. 313300

3.1

T Heads

102110*

102610 102910 102710 103010 105713 105610* 312210 323910 312510

1358435 1396736 1381623 1375162 991503 498 2090 24500498 2090 25534816

25532062

1261785

1256690 1261439 10137093

10240934

10110519 10118653

1991 1990-89

189 3.503 V6, Flat Tappets, Alum. Heads 313300

3.1

T

189 3.50 V6, E.F.I., Flat Tappets Alum. 313000

3.1

T Heads, Regal

313310 312910

10110519 10118653 10065459

1988-87 181 3.80 V6, Short Deck Block, 7/16"

103500 103510

25525932

3.0

L Dipstick Hole in Block,

25529682

Somerset Regal

1987-85 181 3.80 V6, Short Deck Block, 3/8"

103900

103910*

25523686

3.0

L Dipstick Hole in Block, Double

Flats Crankshaft Gear for Oil

Pump, Somerset Regal

1985

181 3.80 V6, Short Deck Block, Splined 103600

103610*

25523686

3.0

L Crankshaft Gear for Oil Pump,

25523244

Somerset Regal

25523214

1985

181 3.80 V6, Tall Deck Block, 20 Bolt

104300 104313*

25524141

3.0

E Oil Pan Rail

1984-82 181 3.80 V6, 14 Bolt Oil Pan Rail

104200

104213*

25518605

3.0

E

25514292

25508266

25520041

* Do not come with oil pump or kit.

A - Head comes with or without a PCV hole in the head, 5/16" or 3/8" rocker studs.

1257125 1260877

1260877 1257125

1255645 1255846 1357898 1378354 1357898 1378351 1378354 1357898

4817 25532694 4817 385 694

1260877 1257125 1260877 981 981 981

981 981

732

732

732

404 257 404 257

1257051 1257722 1254170

1257661

1257051 1257722 1251070

1249175 1254164

1358676 1368767

4250A 2136 A 0619 A

2136

4250 A

25506293

1257051 1257722 10154743

10048651 696,248 10048651 10048696 14079248 10048696 10048651 10048696 10048651 10087511 25524248 25527515

25524248 25523030

25523030

25506293 25518445 25506293 25518445

20110

20110

20113

20113 20113

20103 20103 20102 20101 20110 20110 22175 22175 22175 22175 22175 20104 20104

20104 20105 20105

40

Year

CID Bore Lit. Vin#

Description

Short

Block Crank Head Crank

Block Complete Casting Forging Casting Kit No.

BUICK 4, 6 & V6 "OHV" & "OHC" Continued

SEE NOTE AT END OF BUICK V8 SECTION

1989-87 173 3.50 V6, FWD, M.F.I., Flat Tappets, 312100

2.8

W Alum. Heads, Trigger Fire Ign.,

W/Fuel Pump Shut-off Switch

1989-87 173 3.50 V6, FWD, M.F.I., Flat Tappets, 312000

2.8

W Alum. Heads, Trigger Fire Ign.

1986-85 173 3.50 V6, FWD, M.F.I, Flat Rear Cap 306000

2.8

W

1986-85 173 3.50 V6, FWD, M.F.I, Grooved Rear 306001

2.8

W Cap

1986-85 173 3.50 V6, FWD, 2 B.C., Flat Rear Cap 309900

2.8

X

1986-85 173 3.50 V6, FWD, 2 B.C., Grooved Rear 309901

2.8

X Cap

1984-80 173 3.50 V6, FWD, Flat Rear Cap

306300

2.8

X

312110

312010 306010 306011 309910 309911 306310

10065459 14085481 14092219

10065459 481 14092219 14091820 817

14091820 817

14091820 817

14091820 817

14054833 264 14054832 504

1984-80 173 3.50 V6, FWD, Grooved Rear Cap

2.8

X

306301

306311

14054833 264 14054832 504

1992-91 151 4.00 FWD, Roller Tappets,

NA

121510A*# 10101750 543

2.5

R W/Balance Assembly

1990

151 4.00 FWD, Roller Tappets,

NA

121610A*# 10038980 543

2.5

R W/Balance Assembly

1991-90 151 4.00 FWD, 2.5U, Roller Tappets,

NA

302910A*# 10101401 540

2.5

U Trigger Fire Ign.,Chain Drive,

10044540

W/Bal Assembly, Somerset

Regal

1989

151 4.00 FWD, Roller Tappets,

NA

121710A*# 10038980 543

2.5

R W/Balance Assembly

1989

151 4.00 FWD, 2.5U, Roller Tappets,

NA

303010A# 10041725 540

2.5

U Trigger Fire Ign., W/Bal.

Assembly, Somerset Regal

1988-87 151 4.00 FWD, 2.5U,Std. Trans., Roller NA

301710AB*# 10041725 406

2.5

U Tappets, Trigger Fire Ign.,

10044390

W/Bal Assembly, Somerset

Regal

1988

151 4.00 FWD, Roller Tappets,

NA

122210A*# 10038980 405

2.5

R W/Balance Assembly

1987

151 4.00 FWD, Roller Tappets, Trigger

122000A 122010A

10038893 381

2.5

R Fire Ign., W/O Balance

Assembly

1987

151 4.00 FWD, 2.5U,Auto Trans., Roller 300100AB 300110AB 10043010 406

2.5

U Tappets, Trigger Fire Ign., W/O

10035901 10044390

Bal Assembly, Somerset Regal

1986-85 151 4.00 FWD, 2.5U, Roller Tappets,

301300A 301310A

10027769 771

2.5

U W/O Bal Assembly, Somerset

Regal

1986-85 151 4.00 FWD, Roller Tappets,

301600A 301610A

10028058 684

2.5

R W/O Balance Assembly

10037029 017

10044562

1984

151 4.00 FWD, F.I.

302100A 302110A

10031638 684

2.5

R

1983-82 151 4.00 FWD, F.I.

2.5

5 W/A.I.R. ORDER 302213A

1981-80 151 4.00 FWD, 2 B.C.,

2.5

5 W/A.I.R. ORDER 302013A

302200A 302000A

302210A 302010A

10018149 684

10009540 684 10014194

1981-79 151 4.00 RWD, 2 B.C.,

2.5

5 W/A.I.R. ORDER 301013A

301200A 301210A

10009542 684 10012189

A - New bushing should be installed in rear of crankshaft. Check drawings on page 64 for correct bushing.

B - 1987 2.5U engine has 82 teeth for balancer assembly. 1989-88 2.5U engine has 78 teeth for balancer assembly.

Crankshaft kit #22114 has 82 teeth. Crankshaft kit #22124 has 78 teeth.

C - Crankshaft kit #22118 is for casting #684 only. Order crankshaft kit #22118-1 for casting #017.

* - Do not come with oil pump or kit.

# - Indicates factory inspection of core, before credit is issued.

10048651 14089834

10048651 14089834 14054884 14087879 14054884 14087879 14054887

14054877

14033292 14054879 14084882 14033292 14054879 14084882 10112514 10044485 485 514 10044485 10112514

10044642

10044485

10038808

10038808 10044655 10038808 10044655

10038808

10027767

10027767 10101496

10022373 10101496 552

552

702

22169

22169 22168 22168 22168 22168 22108

22108

22123A 22123A 22124A

22123A 22124A

22114AB 22124AB

22119A 22117A

22114AB 22124AB 22115A

22118AC

22118A 22118A 22118A 22118A

41

Year

CID Bore Lit. Vin#

Description

Short

Block Crank Head Crank

Block Complete Casting Forging Casting Kit No.

BUICK 4, 6 & V6 "OHV" & "OHC" Continued

SEE NOTE AT END OF BUICK V8 SECTION

1995

138 3.62 DOHC, Quad 4,

2.3

D Skyhawk

1996-94 138 3.62 4 Cyl., SOHC, Quad 4, 12mm

2.3

3 Bolts

339500 319900

339510* 319910*

24574250 4620

24570661 25545690 24572927

1993-92 138 3.62 SOHC, P.F.I., Quad 4, Skylark 319200

2.3

3

319210*

24572927 25545690 24576661

1991-90 138 3.62 DOHC, M.F.I., Quad 4,

2.3

D Somerset Regal

1989

138 3.62 DOHC, M.F.I., Quad 4,

2.3

D Somerset Regal

1988

138 3.62 DOHC, M.F.I., Quad 4

2.3

D

319500 319400 319300

319510* 319410A* 319310A*

22539326 25545690 22538061 25545690 22535788 22532120

1995-94 134 3.50 4 Cyl., OHV, F.I., Roller

321100

2.2

4 Tappets

1993

134 3.50 4 Cyl., OHV, F.I., Flat Tappets 321000

2.2

4

321210 321010

10215666 1237 10141927 1237

1989-88 122 3.50 OHV, Trigger Fire Ign.,

2.0

1 W/Dual Oil Line

1989-87 122 3.50 OHV

2.0

1

1988-87 122 3.39 OHC, Std. Trans.,

2.0

M Turbocharged

1988-87 122 3.39 OHC, Std. Trans.

2.0

K

1988-87 122 3.39 OHC, Auto. Trans.,

2.0

M Turbocharged

1988-87 122 3.39 OHC, Auto. Trans.

2.0

K

310900 310700 310200 310300 310400 310500

310910*# 310710*# 310210*# 310310*# 310410*# 310510*#

14086081 003N

10045009 003N

90209802 90209802 90209802 90209802

9028036 902280399

9028036 902280399

9028036 902280399

9028036 902280399

1986-84 122 3.50 OHV, W/O Vacuum Pump Hole 307300# 307310*# 14079546 7248N

2.0 B/P in Block

14077238

1983

122 3.50 OHV, Vacuum Pump Hole in

307000C# 307010C*# 14049747 3278N

2.0

B Block, Double Cam Lobe for

Vacuum Pump

1986-84 1986-84

112 3.339 OHC, Auto. Trans.,

1.8

J Turbocharged, Skyhawk

112 3.339 OHC, Std. Trans.,

1.8

J Turbocharged, Skyhawk

307100# 306700

307110*# 306710*#

90156143 2670 90156143 2670

1986-82

112 3.339 OHC, Auto. Trans.

1.8

O

306600

306610*#

0090529 2670

90156143 2670

1986-82 112 3.339 OHC, Std. Trans

306800 306810*# 0090529 90156143

1.8

O

2670

2670

1982

112 3.50 OHV

306500

306510*

14004069 8705N

1.8

G

A - Crankshaft #22532120 - 1988 is 0? with single chamfer at pulley bolt. Crankshaft #22582120 - 1989 is 15? advanced

with double chamfer at pulley bolt.

B - 1984-83 2.0L engines use a two piece or one piece rear seal. 22160 crankshaft uses a two piece rear seal. 22161

crankshaft uses a one piece rear seal. See drawing on page 37.

C - Vacuum pump wear pad or complete pump assembly must be replaced or damage to the camshaft can occur.

D - Check drawing on page 74 for correct crankshaft application.

* Do not come with oil pump or kit.

# - Indicates factory inspection of core, before credit is issued.

24575456 24573302 24573087 24594468

22530955 22530955 10112391 10112391 10045049 10045049 90209851 90209851 90209851 90209851 14086041 14086041 14033265 90090536 90090536 90090536 90090536 14020509

22194 22193 22193 22193 22193 22191 22163 22163 22162 22162 22157 22157 22157 22157 22161B 22160B

22156 22156 22156 22156 22155

42

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download