Ryerson Polytechnic University



Ryerson University

Department of Electrical & Computer Engineering

ELE 404 – Electronic Circuits

Course Outline

Winter Semester 2004

Course Description: This course provides an introduction to electronics and devices; and analysis and design of transistor amplifiers. The topics include: signal types and amplifier concepts; ideal operational amplifiers (op-amps); diodes, linear and non-linear circuit applications involving op-amps and diodes. Bipolar and field-effect transistors – physical structures and modes of operation; DC analysis of transistor circuits; transistor as an amplifier and as a switch; BJT & FET Amplifiers – small signal models, biasing and single-stage amplifiers circuits; biasing in BJT integrated circuits; differential and multistage amplifier.

Prerequisite: All required first year courses.

Course Organization: Lecture – 4 hrs/week (13 weeks); Lab or Tutorial – 3 hrs/week

Text, References & Lab Materials:

Textbook: (required) Microelectronic Circuits, 5th Edition: A.S. Sedra & K.C. Smith, Oxford University Press, 2003.

Simulation Tool: (required) Electronic Work-Bench Circuit Simulator tool will be made available for students’ use in the Department’s Computer Laboratory. For home use, a student-version of the EWB simulator tool (or pSPICE) is included with the textbook.

Lab Manual: (required) Available on Departmental Website (ee.ryerson.ca) under ELE404 Course. The lab material & instructions for each lab exercise will be posted during the week prior to the scheduled lab work. It is the students’ responsibility to access, and print, the lab material from the website on a timely basis.

Lab Kit: (required) ELE404 Laboratory Kit (can be purchased through the Department).

References: (optional) Microelectronic Circuits, by M.H. Rashid, PWS Publishing Co., 1999.

Electronic Circuit Design, by Savant et al., Benj./Cumm. Publ., 1991.

Electronics, 2nd Edition, by A.R. Hambley, Prentice Hall, 2000.

Course Coordinator: Dr. M. Kassam, (416) 979-5000 x6103, Office: T-419

E-mail: mkassam@ee.ryerson.ca

Course Instructors: Professors:- M. Holmes, D. Androutsos & M. Kassam

Course Evaluation:

|Theory* |75% |

|2 Quizzes 10% | |

|Mid-term Exam 25% | |

|Final Exam 40% | |

|Laboratory* |25% |

|6 Labs 18% | |

|Lab Test 7% | |

| Total |100% |

* To achieve a passing grade in the course, the student must pass both the Theory and Laboratory components of the course.

Curriculum Content Analysis: Basic Science 10%

Engineering Science 60%

Engineering Design 30%

Lecture Content Outline:

|Topic Description |Hours |Text -sections |

|Introduction to Electronics |4 |1.1, 1.2, 1.3, 1.4, 1.5 |

|signal types & spectrum | | |

|amplifier concepts | | |

|circuit model for amplifiers | | |

|Linear Application of Op-Amps |8 |2.1, 2.2, 2.3, 2.4, 2.8.1,|

|the ideal op-amp | |2.8.2 |

|the inverting configuration amplifier | | |

|applications of the inverting amplifier | | |

|the non-inverting amplifier | | |

|instrumentation amplifiers | | |

|Diodes & Basic Circuit Applications |8 |3.1, 3.2, 3.3, 3.4, 3.5, |

|the ideal diode & physical properties | |3.6 |

|rectifier, limiting & clipping circuits | | |

|peak detector & voltage multiplier | | |

|diode function generating & logic circuits | | |

|silicon junction diodes and diode ratings | | |

|diode models | | |

|analysis of real diode circuits | | |

|Non-linear Circuit Applications (op-amps & diodes) |4 |13.9, 13.4, 13.5 |

|precision rectifier circuits | | |

|square- & triangular- wave generation | | |

|Bipolar Junction Transistors (BJTs) |12 |5.1, 5.2, 5.3, 5.4, 5.5, |

|physical structure & modes of operation | |5.6, 5.7. |

|the BJT as an amplifier & switch | | |

|DC biasing | | |

|small-signal models of BJTs | | |

|single & multistage BJT amplifier configurations | | |

|MOS Field-Effect Transistors (MOSFETs) |8 |4.1, 4.2, 4.3, 4.4, 4.5, |

|structure & modes of operation of e-type MOSFETS | |4.6, 4.7, |

|the FET as an amplifier | | |

|DC Biasing | | |

|small-signal models of FETs | | |

|FET Current Sources (see below) | | |

|single-FET amplifier configurations with active load | | |

|IC Design Philosophy & IC Biasing |4 |6.1, 6.3 |

|MOSFET Current Sources, Current Mirrors, & Steering Circuits | | |

|BJT basic, enhanced & Widlar Current Sources | | |

|Differential Amplifiers |4 |7.1, 7.2, 7.3, 7.5 |

|The BJT Differential Pair & Amplifier | | |

|The MOS Differential Pair & Amplifier | | |

Laboratory**/Tutorial/Quiz Schedule:

QUIZ # 1 & Tutorial

|WEEK # | |

|1 Jan 5th |No scheduled Lab or Tutorial |

|2 Jan 12th |LAB # 1: Op-Amp Amplifier Circuit Configurations |

|3 Jan 18th |Tutorial |

|4 Jan 26th |LAB # 2: Op-Amp Linear Circuit Applications |

|5 Feb 2rd |QUIZ # 1 & Tutorial |

|6 Feb 9th |LAB # 3: Diode Circuits |

|7 Feb 16th |Tutorial |

| |STUDY WEEK |

|8 Mar 1rd |LAB # 4: Precision Rectifier Circuits |

|9 Mar 8th |Tutorial |

|10 Mar 15th |LAB # 5: Basic Circuit Applications of BJTs |

|11 Mar 22th |QUIZ # 2 & LAB # 6 |

|12 Mar 29st |LAB # 6: Basic Circuit Applications of FETs |

|13 Apr 5th |LAB TEST |

**NOTE: All of the required course specific (e.g. laboratory) written reports will be assessed not only on their technical or academic merit, but also on the communication skills of the author as exhibited through these reports.

Mid-Term Exam: (to be arranged for a common time-slot during week of February 16th, 2004)

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download