PDF Pressure Equipment Directive (PED) Classification Guide for ...

Bulletin 71:009 D103053X012

June 2019

PED

Pressure Equipment Directive (PED) Classification Guide for Regulator Products

Introduction

The Pressure Equipment Directive (PED) 2014/68/EU requires pressure equipment destined for Europe to have a CE mark and that the equipment meet all aspects of the directive except where noted for SEP. The PED is a directive that applies to the design, manufacture and conformity assessment of pressure equipment and pressure assemblies. All equipment covered by the directive must comply with essential safety requirements and meet the equivalent national laws of all member countries.

PED Classification

To ensure that products destined for Europe meet the requirements of PED, it is necessary to determine the proper PED classification. In the PED, pressure equipment can be classified in one of the following categories:

? SEP (Sound Engineering Practice) ? Category I ? Category II ? Category III ?Category IV

SEP Products

The SEP classification applies to pressure equipment that is not subject to Category I, II, III or IV conformity assessment, but must be designed and manufactured with "sound engineering practice" as defined by the PED. SEP classified products do not and cannot receive a CE mark.

Product Classification

Use Tables 1 to 5 to find the PED category of a specific product.

Note Any specific type number, body size or body material not included in the PED Product Classification table is not

Figure 1. CE Mark

available for sale into Europe. Products can only be processed per classification specified in the PED Products Classification table. Due to PED Classification limitations, some products may not be available at full rated pressures. Be sure to check the PED Limitation column in the PED Product Classification table.

PED Documentation

Documentation

FisherTM branded products destined for Europe will contain an Installation Guide in the language requested or in the language of destination. If a language is not requested or the destination is unknown, English, German and French Installation Guides will be included.

Documentation On-Line

PED Installation Guides in the desired language are available on the internet for immediate viewing and downloading. To access: go to , locate and click the CE mark button (see Figure 1). Subsequent screens will display available PED Installation Guides. The PED Installation Guides may be downloaded in .pdf format. (To view a .pdf file, Acrobat Reader software must be installed on your computer. Acrobat Reader software latest version is available free at .)

PED

Table 1. PED Classification for Products Manufactured in McKinney or FROMEX(1)

SERIES OR TYPE

32A pilot 61 pilot

63EG

66 67C/CF 67CS/CFS 67D/DF 67DS/DFS 92B pilot

92B

92C

92S/W

99 112 119 133H/HP/L/Z 161EB 161AY 167D/DS 167DA/DAS 168/168H/68-2 252 289A 289H 289HH 289L 289P 289U

299H/HR/HS/HSR/ HV/HVR

NPS 1/4 1/4 1

2

SIZE

DN -------

25

50

3 and 4

80 and 100

6

150

8x6

2 to 4 1/4 1/4 1/2 1/2 1/4 1

1-1/2 and 2

200 x 150

50 to 100 ------15 15 ---25

40 and 50

3 and 4 1/2 to 1

1 1-1/2 and 2

80 and 100 15 to 25 25 40 and 50

2-1/2 to 4

65 to 100

6x4

150 x 100

2

1/4 3/4 and 1

2

1/4 1/2 1/4 and 1/2 1/4 and 1/2 1/4 1/4 1/4 1 2 1 3/4 and 1 1 1/4

1-1/2

50

---20 and 25

50

---15 15 15

----------

25 50 25 20 and 25 25 ----

----

2

50

1

25

310A

2 to 4

50 to 100

4x6

100 x 150

1. Please consult factory for other products not listed in this Bulletin.

BODY MATERIAL

All All All Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel All All All All All All All Steel, Stainless steel Steel, Stainless steel All All Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Cast iron Steel All All All Steel All All All All All All All All All All All All All Ductile iron, Cast iron, Steel Ductile iron, Cast iron

Steel

All Steel Steel

END CONNECTION

All All All NPT, CL150 RF, CL300 RF, PN 16/25/40

CL150 RF, CL300 RF, PN 16

CL150 RF, CL300 RF, PN 16

CL150 RF

All All All All All All All NPT, CL150 RF, CL300 RF, PN 16/25/40 CL150 RF, CL300 RF, PN 16/25/40 All All NPT, CL150 RF, CL300 RF, PN 16/25/40 CL150 RF, CL300 RF PN 16/25/40

CL300 RF

NPT, CL125 FF, CL250 RF NPT, CL150 RF, CL300 RF

All All NPT, CL125 FF NPT, CL150 RF All All All All All All All All All All All All All

NPT

NPT, CL125 FF, CL250 RF, PN 10/16

NPT, CL150 RF, CL300 RF, PN 10/16

All CL300 RF, CL600 RF CL300 RF, CL600 RF

PED LIMITATION

psig

bar

---- ----

---- ----

---- ----

---- ----

---- ----

275

19.0

232

7.3 -------------------

----

16.0

0.50 -------------------

----

-------------

-------------

---- ----

275

275 275 ----------------------------------------------------

----

19.0

19.0 19.0 ----------------------------------------------------

----

---- ----

----

----------

----

----------

CATEGORY

SEP SEP SEP

II

II

II

II

SEP SEP SEP SEP SEP SEP SEP

II

II

SEP SEP

II

II

II

I I SEP SEP I I SEP SEP SEP SEP SEP SEP SEP SEP I SEP SEP SEP SEP

I

I

I

SEP III III

- continued -

2

PED

Table 1. PED Classification for Products Manufactured in McKinney or FROMEX(1) (continued)

SERIES OR TYPE

627/H/M/R/HM/ F/W/WH

627-109 630 670 912N

NPS 3/4 and 1

SIZE DN

20 and 25

2

50

3/4 and 1 1 1/4

1/4 and 3/8

20 and 25 25

-------

1

25

1098/H-EGR, 1098-63EG

2 3 and 4

6

50 80 and 100

150

8x6

200 x 150

1

25

1190/1290

2 3 and 4

50 80 and 100

6

150

1301/F/G 1305 1367

6351 pilot 6352 pilot 6353 pilot 6354 pilot 6358 pilot 6392 pilot 6492 pilot

ACE95 ACE95jr ACE95Sr

ACE97(2)

CS400, CSB400, CS800

and VS100

1/4 1 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/4 and 1 1/2 and 1 2 1/2 and 1 2

See Table 2

1

---25

------------------------20 and 25 15 and 25

50 15 and 25

50

See Table 2

25

EZR

2 and 2x1

3 to 6

50 and 50 x 25

80 to 150

8 and 8x6

200 and 200 x 150

EZR Relief

1, 2, 3, 4 and 6

25, 50, 80, 100 and 150

H120

1/4

----

H200

3/4, 1

----

H800

1/4

----

HSR

3/4 to 1

20 to 25

1. Please consult factory for other products not listed in this Bulletin. 2. Size refers to inlet (PAD) connection.

BODY MATERIAL

All Steel, Stainless steel

All All All All Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel Steel, Stainless steel All All All All All All All All All All All All Stainless steel Stainless steel Stainless steel

See Table 2

All

Steel

Steel

Steel

Steel

All Brass

All All

END CONNECTION

All NPT, CL150 RF, CL300 RF,

CL600 RF, PN 16/25/40 All All All All

NPT, CL150 RF, CL300 RF, PN 16/25/40

NPT, CL150 RF, CL300 RF, PN 16/25/40

CL150 RF, CL300 RF, PN 16

CL150 RF, CL300 RF, PN 16

CL150 RF

NPT, CL150 RF, CL300 RF, PN 16/25/40

NPT, CL150 RF, CL300 RF, PN 16/25/40

CL150 RF, CL300 RF, PN 16

CL150 RF, CL300 RF, PN 16

All All All All All All All All All All All All NPT, CL150 RF, CL300 RF All CL150 RF

See Table 2

All NPT, BWE, CL150 RF, CL300 RF, CL600 RF, PN 16/25/40 NPT, BWE, CL150 RF, CL300 RF, CL600 RF, PN 16/25/40 CL150 RF, CL300 RF, CL600 RF NPT, SWE, CL150 RF, CL300 RF, CL600 RF, BWE

All NPT All All

PED LIMITATION

---No Aluminum

casings ----------------

----

----

----

----

----

----

----

-------------------------------------------------

See Table 2

----

----

----

----

----------------

CATEGORY SEP II SEP SEP SEP SEP SEP

II

II

II

II

SEP

II

II

II SEP SEP SEP SEP SEP SEP SEP SEP SEP SEP SEP SEP

I SEP

I

See Table 2

SEP

III

III

III

III SEP SEP SEP SEP

- continued -

3

PED

Table 1. PED Classification for Products Manufactured in McKinney or FROMEX(1) (continued)

SERIES OR TYPE LR125

LR128 MR95H/HD MR95HP/HT MR95L/LD MR98H/HD MR98HH/HHD MR98L/LD

MR105, MR108

NPS 1 and 2 3 and 4 1 and 2 3 and 4

SIZE DN

25 and 50 80 and 100 25 and 50 80 and 100

BODY MATERIAL

All All All All

See Table 2

See Table 2

See Table 2

1 2

3 and 4

25 50

80 and 100

Steel, Stainless steel

P590 filter

SR5, SR8

T205, T205B and T208

Y191A pilot Y291 pilot

Y600A Y690A/AH/AHM/AM

Y690VB/VBM

1/4 1/2, 3/4 and 1 1-1/2 x 1, 1-1/2 and 2

3

3/4 and 1

3/4 and 1

3/4

3/4 or 1

3/4 and 1

3/4 and 1

Y692/VB/VBM

1-1/2 2

---15, 20 and 25 40 x 25, 40 and 50

80 20 and 25 20 and 25

20 ---20 and 25 20 and 25

40

50

Y693

Y695A/AM/VR Y695RR

1-1/2

2 3/4 and 1 3/4 or 1

40

50 20 and 25

----

1-1/2

40

Y696/VR/VRM

2

50

1. Please consult factory for other products not listed in this Bulletin.

All

All

All

All

All

All

All

Cast iron

All

All

Cast iron

Steel, Stainless steel,

Hastelloy? C

Cast iron Steel,

Stainless steel, Hastelloy? C Cast iron Steel, Stainless steel Cast iron Steel, Stainless steel All

Ductile iron

Cast iron

Steel, Stainless steel,

Hastelloy? C

Cast iron

Steel, Stainless steel,

Hastelloy? C

END CONNECTION All All All All

See Table 2

NPT, CL150 RF, CL300 RF, CL600 RF, PN 16/25/40 CL150 RF, CL300 RF, CL600 RF, PN 16 All All

All All All All All NPT All All NPT

NPT, CL150 RF, CL300 RF, PN 16/25/40

NPT, CL125 FF NPT, CL150 RF, CL300 RF, PN 16/25/40

NPT NPT, CL150 RF, CL300 RF, PN 16/25/40

NPT NPT, CL150 RF, CL300 RF, PN 16/25/40

All NPT NPT

NPT, CL150 RF, CL300 RF, PN 16/25/40

NPT

NPT, CL150 RF, CL300 RF, PN 16/25/40

PED LIMITATION

-------------

CATEGORY

SEP II

SEP II

See Table 2

See Table 2

----

----------------------------------

----

----

----

----------------------

----

----

----

SEP

II

SEP SEP

I II SEP SEP SEP SEP SEP SEP I

I

I

I

I I I I SEP SEP I

I

I

I

Hastelloy? C is a mark owned by Haynes International, Inc.

4

PED

Table 2. PED Classification for Products Manufactured in FROMEX(4) or Cluj, Romania(1)

SERIES OR TYPE

CS400 and CS404

CSB400, CSB410, CSB420, CSB430, CSB450, CSB404, CSB414, CSB424, CSB434

and CSB454

SIZE

NPS

DN

1-1/4, 1-1/2 and 2 32, 40 and 50

2

50

1-1/4 and 1-1/2

32 and 40

1, 1-1/4, 1-1/2 and 2

25, 32, 40 and 50

1, 1-1/4, 1-1/2, 2, 1 x 1-1/4

and 1 x 2-1/4

25, 32, 40, 50, 25 x 32

and 25 x 57

2

50

1-1/2

40

1, 1-1/4 and 1-1/2

25, 32 and 40

CS800, CS820,

1-1/2

40

CS850, CS804,

CS824 and CS854

2

50

CSB600, CSB604, CSB620, CSB624,

CSB650 and CSB654

CSB700, CSB704, CSB720, CSB724,

CSB750 and CSB754

1-1/4, 1-1/2 and 2 2

1-1/4 and 1-1/2 1-1/4, 1-1/2 and 2

2 1-1/2 and 2

2 1/1/2002 1-1/2 and 2

2 1/4 to 1

32, 40 and 50 50

32 and 40 32, 40 and 50

50 40 and 50

50 40 40 and 50 50 15 to 25

BODY MATERIAL Ductile cast iron Cast steel

Ductile cast iron

Cast steel Ductile cast iron,

Cast steel Ductile cast iron,

Cast steel Ductile iron

WCC steel

Ductile iron

WCC steel All

END CONNECTION

NPT, Rp CL125 FF/CL150 FF, PN 10/16

NPT, Rp

NPT

Rp

CL125 FF/CL150 FF, PN 10/16 PN 16 Slip-On

NPT, Rp

NPT, Rp

NPT, Rp, PN 10/16, CL125 FF/ CL150 FF, CL150 RF NPT, Rp

CL125 FF / CL150 FF, PN 10/16 PN 16 Slip-On NPT, Rp

CL150 RF, PN 10/16 NPT, Rp

CL125 FF / CL150 FF, PN 10/16 PN 16 Slip-On NPT, Rp

CL150 RF, PN 10/16 All

MR95H/HD

1-1/2 and 2

40 and 50

Cast Iron

Steel, Stainless steel

NPT

NPT, CL150 RF, CL300 RF, SWE, PN 16/25/40

1/4 to 1

15 to 25

All

All

MR95HP/HT

1-1/2 and 2

40 and 50

Steel, Stainless steel

NPT, CL150 RF, CL300 RF, SWE, PN 16/25/40

MR95L/LD

1/4 to 1

15 to 25

All

All

1/4 to 1

15 to 25

All

All

MR98H/HD

1-1/2 and 2

40 and 50

Steel, Stainless steel

NPT, CL150 RF, CL300 RF, SWE, PN 16/25/40

MR98HH/HHD

1/4 to 1

15 to 25

All

All

MR98L/LD

1/4 to 1

15 to 25

All

All

1, 1-1/4, 1-1/2 and 2

25, 32, 40 and 50

NPT

VS111 and VS112

1, 1-1/4, 1-1/2, 2, 1 x 1-1/4

and 1 x 2-1/4

2

25, 32, 40, 50, 25 x 32

and 25 x 57

50

Ductile cast iron

Rp CL125 FF, CL150 FF, PN 10/16

1-1/2

40

PN 16 Slip-On

1, 1-1/4 and 1-1/2

25, 32 and 40

Steel

NPT, Rp

1. Please consult factory for other products not listed in this Bulletin. 2. Only manufactured in Cluj, Romania. 3. Cast iron body materials only available from FROMEX. 4. FROMEX can only manufacture SEP and Category I PED Classifications for all MR95 and MR98 Series.

PED LIMITATION

-------

----

----

CATEGORY

I (without slam shut)

IV (with slam shut)

----

----------

----

----------------------------------

-------------------------

I (without slam shut)

IV (with slam shut)

I (without slam shut)

IV (with slam shut)

I (without slam shut)

IV (with slam shut)

I (without slam shut)

IV (with slam shut)

SEP I(3)

II(2)

SEP

II(2)

SEP SEP

II(2)

SEP SEP

----

IV

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download