-782CTW5 CGG-F782CTW5
[Pages:13]F-782CTW5
CGG-F782CTW5
1xPON+2LAN+1POTS+1USB+WiFi5+CATV HGU
1
F-782CTW5
Content
Product OverView ..............................................................................................................................3 Product appearance features .............................................................................................................4
.......................................................................................................................................................4 Application Chart ...............................................................................................................................5 Technical parameters .........................................................................................................................6
Table 2 Technical parameters ........................................................................................................8 Panel lights .....................................................................................................................................8 Interface description ......................................................................................................................9 Software function.............................................................................................................................10
2
F-782CTW5
Product OverView
2GE+1POTS+WiFi+CATV GPON/EPON HGU WiFi Mesh terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. These boxes are based on the mature Chipset (Realtek) technology, which have high ratio of performance to price, and the technology of IEEE802.11b/g/n/ac WiFi, Layer 2/3, Wi-Fi EasyMesh,and high quality VoIP as well. Support full management of HGU devices through OLT. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah,ITU-T G.984.x and technical requirement of GPON.
3
F-782CTW5
Product appearance features
Figure 1 2LAN+1POTS+1USB+WiFi4/5 HGU
4
F-782CTW5
Application Chart
Figure 2 Application Chart
5
F-782CTW5
Technical parameters
Technical item
1*xPON+2*GE+1*POTS+WiFi+USB
1 G/EPON port(EPON PX20+ and GPON Class B+)
Receiving sensitivity: -28dBm PON interface
Transmitting optical power: 0+4dBm
Transmission distance: 20KM
Wavelength Tx1310nm,Rx 1490nm
Optical interface
SC/UPC connector
LAN interface
2*10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45 connector
USB interface USB 3.0, Transmission Rate: 4.8Gbps
Optical receiving wavelength: 1550?10nm
RF frequency range: 471000MHz
Optical power input range: 0-3dBm CATV interface
RF output impedance: 75
RF output level: 5060dBuV(0-3dBm optical input)
MER: 32dB(-3dBm optical input)
POTS interface 1*RJ11 connectors
6
F-782CTW5
G.711A/G.711U/G.723/G.729 Codec,T.30/T.38/G.711 Fax mode, DTMF Relay
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz (WiFi 4) WiFi interface 5.0GHz Operating frequency: 5.150-5.825GHz (WiFi 5 wave 2) WiFi:4*4 MIMO,,5dBi antenna, rate up to 1.167Gbps,Multiple SSID TX power: 11n--22dBm/11ac--24dBm
LED
5, For Status of PON/LOS, WiFi,TEL,LAN1,LAN2
Operating Temperature: 0+50 Enviroment Humidity: 10%90%non-condensing
Storing Temperature: -30+60 Enviroment Humidity: 10%90%non-condensing
Power Supply DC 12V/1.5A,12W
Dimension 178mm?120mm?30mm(L?W?H)
Net weight 0.28kg
7
F-782CTW5
Table 2 Technical parameters
Panel lights
LED
ON
Blink
OFF
PWR The device is
N/A
powered up
The device is powered down
PON Green is registered to the PON system
LOS Device does not receive optical
signals
LAN1,LAN2
Port is connected properly
WiFi WiFi Turn On
(2.4G/5Gh PHzO)NE
CATV
Device has registered to Softswitch,No Data t1r5a5n0snmmisswioanvelength power of input is in.
Green is registering to the PON system
N/A
Port is Sending/Receiving Data
WiFi Turn On with ongoing data tPrhaonnsme hisosiookns off or the port is with ongoing data t1r5a5n0snmmisswioanvelength power of input is too high.
Device is not registered to the PDOevNicseyshtaevme received optical signals
The subscriber network cable is not plugged tightly or the port connection iDseinvicdoerriescPtoowrenroOff coornWnieFcitTiounrn. Off
Device is power off or not registered to the Soft-Switch
1550nm wavelength power of input is too low or no input.
USB
USB device is connected
Ongoing data transmission
USB device isn't connected
Table 3 Panel lights on
8
................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
- state of california comcast business ifb stpd 12 001 b refresh
- application note comcast sip trunking cisco unified communications
- touchlink smart dual band giga wi fi router ws wn531g3 a
- lenovo n22 or n23 not able to see comcast router
- 782ctw5 cgg f782ctw5
- underthehood xfinity s mostpowerfulgateway
- comcast router port forwarding setup for idvr cctv camera pros
- cm500 high speed cable modem user manual netgear