5.2.2.3 Lab - Advanced Installation of Windows 7
IT Essentials 5.05.2.2.3 Lab - Advanced Installation of Windows 7IntroductionPrint and complete this lab.In this lab, you will install a Windows 7 operating system by using an answer file for automation. You will customize partition settings and create an Administrator account and User accounts. Recommended EquipmentThe following equipment is required for this exercise:A computer with a new installation of Windows 7Windows Automated Installation Kit (Windows AIK) installation mediaWindows 7 installation mediaA blank, formatted floppy disk or a USB flash driveStep 1Ask the instructor for the following required information for the answer file: Regional and language settings __________________________________________Windows 7 product key ______________________________________Partition sizes: Primary ___________ Logical 1 ___________ Logical 2 ___________ Administrator account: User name _________________________________________ Password ___________________________________________User account: User name ________________________________________________ Password _________________________________________________Computer name _______________________________________________________Registered organization _________________________________________________Registered owner ______________________________________________________Time zone ____________________________________________________________Step 2Log on to the computer as Administrator. Installation from a DVD-ROM: Insert the Windows Automated Installation Kit (AIK) DVD. When the “AutoPlay” window opens, click Run StartCD.exe. Click Yes if prompted by User Account Control.The “Welcome to Windows Automated Installation Kit” window opens, click Windows AIK Setup.When the “Setup Wizard” opens, click Next. Select I Agree to license terms and then click Next.For the “Select Installation Folder” window, keep the default settings and click Next.Click Next to confirm and start the installation.A window opens displaying the file installation progress.When the “Installation Complete” screen appears, click Close.Click Exit.Step 3Create a folder called Windows_7_Installation at the root of C:. Example: C:\Windows_7_Installation.Insert the Windows 7 media in the appropriate drive. Close the Windows 7 media Install Windows window if it opens.Navigate to D:\sources and copy install.wim and install_Windows 7 PROFESSIONAL.clg from the Windows 7 installation media to C:\Windows_7_Installation.Note: The install.wim file is 1.94GB and may take several minutes to copy.Step 4Start > All Programs > Microsoft Windows AIK > Windows System Image Manager. Step 5The “Windows System Image Manager” window opens.Right-click Select a Windows image or catalog file > Select Windows Image.Browse to C:\Windows_7_Installation > install.wim > Open.Click Yes. Click Yes if prompted by User Account Control.A catalog file is generated in the “Windows Image” area. Right-click Create or open an answer file > New Answer File.A new answer file is created in the “Answer File” area.To name the file select the root node Untitled.Click File > Save Answer File > name the file autounattend. Make sure the Windows_7_Installation folder is selected and then click Save.Note: It is important to name the file autounattend, as Windows 7 will only search for that file name when performing an unattended installation. Step 6In the “Windows Image” area, expand Components.Note: The name of the components will have a prefix and suffix attached, for example: x86_Microsoft-Windows-International-Core-WinPE_6.1.7600.16385_neutral. The prefix is x86 and the suffix is 6.1.7600.16385_neutral. For simplicity, the prefix and suffix will be left out in the lab instructions.Right-click Microsoft-Windows-International-Core-WinPE > Add Settings to Pass 1 windowsPE.Notice that Microsoft-Windows-International-Core-WinPE has been added to the “Answer File” and “Properties” areas.Select Microsoft-Windows-International-Core-WinPE in the Answer File area. In the Microsoft-Windows-International-Core-WinPE Properties area, type the language settings, provided by your instructor, in the following locations: InputLocale, SystemLocale, UILanguage, UILanguageFallback, and UserLocale. For example: en-us.Note: Place the curser next to a setting in the “Properties” area and press the F1 key to view the Windows Help file for the setting. Supported regional and language settings are also located here: (VS.85).aspxIn the “Answer File” area, expand Microsoft-Windows-International-Core-WinPE > select SetupUILanguage. In the “SetupUILanguage Properties” area, type the language settings provided by your instructor in the UILanguage location. For example: en-us.Confirm OnError is selected for WillShowUI.Step 7In the “Windows Image” area, locate and expand the component Microsoft-Windows-Setup > right-click UserData > Add Setting to Pass 1 windowsPE.Select UserData in the “Answer File” area. In the “UserData Properties” area, click in the box to the right of AcceptEula and select true. In the “Answer File” area, expand UserData > ProductKey. In the “ProductKey Properties” area, click in the box to the right of Key and enter the Windows 7 product key provided by the instructor. Click in the box to the right of the WillShowUI and select Never.Step 8In the “Windows Image” area, locate and expand component Microsoft-Windows-Setup\DiskConfiguration > right-click Disk > Add Setting to Pass 1 windowsPE.Select Disk in the “Answer File” area. In the “Disk Properties” area, click in the box to the right of DiskID and type the number 0. Set WillWipeDisk to true.In the “Answer File” area, expand Disk[DiskID=“0”] > right-click CreatePartitions > Insert New CreatePartition.Add four more CreatePartition objects, for a total of five objects. Select the top CreatePartition in the “Answer File” area. In the “CreatePartition Properties” area, set the following values: Extend = false, Order = 1, Size = 100, and Type = Primary. Notice that the newly configured partition moves to the bottom of the five CreatePartition objects.Select the top CreatePartition in the “Answer File” area. In the “CreatePartition Properties” area, set the following values: Extend = false, Order = 2, and Type = Primary. For Size, use the primary partition size provided by the instructor. For example: Size = 16000.Select the top CreatePartition in the “Answer File” area. In the “CreatePartition Properties” area, set the following values: Extend = True, Order = 3, and Type = Extended.Select the top CreatePartition in the “Answer File” area. In the “CreatePartition Properties” area, set the following values: Extend = false, Order = 4, and Type = Logical. For Size, use the logical 1 partition size provided by the instructor. For example: Size = 5000.Select the top CreatePartition in the “Answer File” area. In the “CreatePartition Properties” area, set the following values: Extend = false, Order = 5, and Type = Logical. For Size, use the logical 2 partition size provided by the instructor. For example: Size = 5000.In the “Answer File” area, right-click ModifyPartitions > Insert New ModifyPartition.Add three more ModifyPartition objects, for a total of four objects. Select the top ModifyPartition in the “Answer File” area. In the “ModifyPartition Properties” area, set the following values: Action = AddListItem, Active = true, Extend = false, Format = NTFS, Label = System Reserved, Letter = leave this blank, Order = 1, PartitionID = 1, and TypeID = 0x27. Select the top ModifyPartition in the “Answer File” area. In the “ModifyPartition Properties” area, set the following values: Action = AddListItem, Active = false, Extend = false, Format = NTFS, Label = Local Disk, Letter = C, Order = 2, and PartitionID = 2.Select the top ModifyPartition in the “Answer File” area. In the “ModifyPartition Properties” area, set the following values: Action = AddListItem, Active = false, Extend = false, Letter = E, Order = 3, and PartitionID = 3.Select the top ModifyPartition in the “Answer File” area. In the “ModifyPartition Properties” area set the following values: Action = AddListItem, Active = false, Extend = false, Letter = F, Order = 4, and PartitionID = 4.In the “Windows Image” area, locate and expand component Microsoft-Windows-Setup\DiskConfiguration\ImageInstall\OSImage\InstallTo > right-click InstallTo > Add Setting to Pass 1 windowsPE.Select InstallTo in the “Answer File” area. In the “InstallTo Properties” area, set the following values: DiskID = 0 and PartitionID = 2.Step 9In the “Windows Image” area, locate and expand component Microsoft-Windows-Shell-Setup\UserAccounts\LocalAccounts > right-click LocalAccount > Add Setting to Pass 7 oobeSystem.In the “Answer File” area, right-click LocalAccounts > select Insert New LocalAccounts.You should now have two LocalAccounts objects. Setup an Administrators account.Select the top LocalAccount in the “Answer File” area. In the “LocalAccount Properties” area, type the DisplayName and the Name provided by your instructor. Example: Vicki and Vicki M.Type Administrators as the name of the Group.Expand LocalAccount[Name=“Vicki M”] > Password. In the “Password Properties” area, type the password provided by your instructor in the Value setting. Example: Pa$$w0rd.Set up a User account.Select the top LocalAccount in the “Answer File” area. In the “LocalAccount Properties” area, type the DisplayName and the Name provided by your instructor. Example: John and John M.Type Users as the name of the Group.Expand LocalAccount[Name=“John M”] > Password. In the “Password Properties” area, type the password provided by your instructor in the Value setting. Example: Pa$$w0rd.Step 10In the “Windows Image” area, locate Microsoft-Windows-Shell-Setup > and right-click Themes > Add Setting to Pass 4 specialize.Select Microsoft-Windows-Shell-Setup in the “Answer File” area below component 4 specialize. In the “Microsoft-Windows-Shell-Setup Properties” area, type the ComputerName, RegisteredOrganization, and RegisteredOwner provided by your instructor. Example: Computer1, Cisco, and Vicki.Expand Microsoft-Windows-Shell-Setup in component 4 specialize of the “Answer File” area. Locate and select Themes. In the “Themes Properties” area, set the following value: DefaultThemesOff = false.Step 11In the “Windows Image” area, locate and expand component Microsoft-Windows-Shell-Setup > right-click OOBE > Add Setting to Pass 7 oobeSystem.Select Microsoft-Windows-Shell-Setup in the “Answer File” area below component 7 oobe System. In the “Microsoft-Windows-Shell-Setup Properties” area, type the time zone in the TimeZone setting, provided by your instructor. Example: TimeZone = Pacific Standard Time.Select OOBE in the “Answer File” area. In the “OOBE Properties” area, set the following value: NetworkLocation = Work and ProtectYourPC = 3. This will disable automatically installed updates.Note: Normally you would set ProtectYourPC to 1, automatically install updates. But to reduce the installation time for this lab we will set the value to 3.Step 12Before validating the answer file, expand all components in the autounattend file to make sure everything is properly added.If anything is missing, go back over the lab and add the missing components or settings.Click Tools > Validate Answer File.Select the Validation tab in the “Messages” area. If you see any error or warning messages, ask your instructor for assistance in correcting them before proceeding with the lab.If there are no error or warning messages click File > Save Answer File.Step 13Copy the autounattend.xml file from C:\Windows_7_Installation to the root of the floppy disk or USB flash drive.Insert the floppy disk in the floppy drive or connect the USB flash drive to a USB port.Insert the Windows 7 media in the appropriate drive. Restart the computer.Step 14When the Press Any Key to Boot from CD or DVD message appears, press any key on the keyboard. The installation of Windows 7 will proceed in a completely unattended fashion, and finally you will be presented with the logon screen.Note: The system will flash on and off several times, restart several times, and other times only a black or blue screen will appear with nothing else shown during the installation.Logon to the computer using the administrator name and password used in the autounattend file.What was the name of the file used to automate the installation located on the floppy disk or USB flash drive?How do you think automating the installation will help the IT Department if they have to repeat the procedure on 100 computers? ................
................
In order to avoid copyright disputes, this page is only a partial summary.
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Related download
Related searches
- grammarly installation in windows 10
- free adobe installation for windows 10
- sin 2 theta 3 4 5 triangle
- 2 5 x 2 5 square in pixels
- 7 x 2 3 x 4
- create windows 7 installation disk
- windows 7 installation tool usb
- create windows 7 installation dvd
- create windows 7 installation usb
- temporary installation files windows 10
- gta 5 windows 7 install
- create windows 7 installation media